Table for WBS and employee information

Hi,
Is there a table where I can find information for which WBS elements an employee are allowed to record hours against?
Thanks!
BR,
Linda

Hi,
If I go to transaction CJ20N, select a WBS element, choose Edit -> WBS Element -> Project team for WBS element, I get a list containing the employees that are allowed to record hours against this WBS element, and the allowed time-interval. I want to transfer this information to a third-party system, but I'm not sure how I'm going to collect the information. I cannot find the correct tables to collect this information.
Does anyone have any suggestions?
Thanks!
BR,
Linda

Similar Messages

  • How to find R/3 table  for FI and PS Datasources

    Hi,
    Can anyone tell me that how can we find SAP tables for FI and PS datasources in BI. Please provide information as it is urgent. Points will be assigned
    Thanks
    Shanthi

    Hi,
    To find DS assigned to a table.
    How to find the Datasources for the given table names ?
    How to find the Datasources for the given table names ?
    To find Tables assigned to a DS.
    USe Extractor Checker RSA3. Execute ST05 (activating SQL Trace), switch on the trace and execute the extractor checker. Once the extractor checker presents the results
    switch off trace. The clcik on Display trace and you will see all the tables that were hit by the extractor checker to
    retrieve data and present it to you.
    Note: Set the break point in the Extractor Function module.
    View the ST05 Extended Trace list. The Object name shows the Tables accessed.
    Thanks,
    JituK

  • Table for Customer and vendor open balance on a key date

    Dear All,
    Can anyone please let me know Table for Customer and vendor open balance on a key date. We are developing one customized report.
    I have checked with the below table :
    Customer-KNC1, KNC3,BSID, BSAD
    Vendor-LFC1, LFC3, BSIK, BSAK.
    But these are not working properly for all customers and vedors. Also, in open items, there are items with clearing documents.
    Plesae let me know, how to go for it.
    Please suggest.

    Hi
    Use BSID and BSIK for open items
    And pass company code, year and from date and to date range in Posting date selection option
    Reg
    Vishnu

  • Need table for customer and vendor carry forward balance

    Hi,
    I need to fetch the carry forward(opening) balance for GL, customer and vendor account for my report.
    I have table which contains c/f balance for GL accounts which is "GLT0" and now looking for a table for customer and vendor accounts.
    Please let me know if anyone have idea in which table i can get the c/f balance for customer and vendor accounts.
    Thanks in advance.
    Regards,
    Swati

    Hi Gurus
    The requirement from the client side in my case is to have opening balance in Tr code ZFBL1n, ZFBL3N and ZFBL5N.
    Now, from the above thread i got the Tables where i could find the Vendor and Customer Opening Balance but i also want Opening Balance for GL.
    and my 2nd query is how to get these opening balance in Z report, at Header Level.
    Thanks and Regards
    Dnyanesh

  • Source tables for forms and tabular forms must have a primary key.

    Why does HTML DB 2.0 return the message
    "Source tables for forms and tabular forms must have a primary key."
    when trying to generate a "Report and Form" page based on a view defined like "create view <applicationschema>.a as select * from <sourceschema>.b" ?
    It should be possible for HTML DB to "see" that the table "<sourceschema>.b" already has a primary key.
    bw - Christian

    Christian,
    In the create application wizard, when creating form or tabular form pages, you can only use tables with primary keys, and not views, because that wizard is automatically deriving the primary key from the table definition. If you want to build forms on views or tables without a primary key, you need to use one of the create form wizards while working on an existing application. Those wizards allow you to pick your own column as a primary key column.
    Regards,
    Marc

  • Taking long time filling the setup tables for sales and shipment

    Hi ,
    I am trying to fill the setup tables for sales and shipment and it is taking lot of time .
    It took 16 hours just to bring 6 months of  sales history  data in the test environment .
    Cn anybody help on this issue why it is taking that much of time ...
    I am trying to  load the sales data from R/3 into APO-BW from 2005 to 2007 .......
    It is taking 16 hours to fill the data for only 6 months .

    Hi,
    1. delete data and refill the setuptables again by spliting to several small pieces.
    2. compare the data. wht is the last Document numner in RSA3(Maximum one). Start from Maximum one. may be bit complex approch.
    you need to check with PSA and base tables.
    keep one thing in your mind you need to check againest MSEG and BSEG only. noy BKPF and MKPF.
    correct if i'm wrong.
    either refill or create a user exit to avoid duplicae records(you should have very good understanding of data, it will lead to inconsitent data for delta records).
    User exit not a good solution. it's one possibility.
    ****Assign Points If Helpful****
    Regards,
    Ravikanth

  • [svn] 4235: Fix for - Links and type information missing for air.update. event events in @event listings

    Revision: 4235
    Author: [email protected]
    Date: 2008-12-04 13:02:39 -0800 (Thu, 04 Dec 2008)
    Log Message:
    Fix for - Links and type information missing for air.update.event events in @event listings
    Also adding support for multiple @event for a method.
    QE Notes: None
    Doc Notes: None
    Bugs: SDK-18319
    tests: checkintests
    Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-18319
    Modified Paths:
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/AsDocUtil.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/ClassTable.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/DocComment.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/TopLevelClassesGenerator.ja va

    Hi All,
    I have sorted out the problem and this is fixed now.
    Regards,
    Ajay Kunde

  • Table for terms and conditions

    what is table for terms and conditiions??
    regards
    jyoti

    Hi Jyoti,
      If u are looking for the payment terms then the table T052 and T052U.
    Regards
    Kiran Sure

  • Base tables for aggragates and Multiproviders

    Is  RSDICMULTIIOBJ the base table for Multiproviders?
    What is the base table for Aggragates and units?

    Multiproviders
    RSDCUBEMULTI 
    RSDICMULTIIOBJ
    Aggregates
    RSDDAGGREF
    RSDDAGGRT
    RSDDCVERREPAGGR
    RSDDAGGR    
    RSDDAGGRCOMP
    RSDDAGGRDIR 
    RSDDAGGRDIR_M

  • How to fill up set up tables for 2lis_03_UM and BF?

    Hi,
    I am working on Material movements, and i have a How to do document. According to that, its showing me to fill up set up table for 2Lis_03_bf by using TCode OLI1BW, and in the very next step its again telling me to fill up set up table for UM, by using the same TCODE ( OLI1BW ) .
    Now, if i do that, how would the system know that it has to fill up set up table for BF and then UM ? , no where in the screen its asking to fill up the Data source.
    OR i just have to fill up set up table ONCE, and it will fill up for both the DS ?
    please help.
    thanks

    Hi,
    I think you can follow the same procedure.  After completion of setup table filling you can check the result in RSA3.
    In case of UM, you will have the provision to load data based on specific Company codes, but if you don't have any such requirement then you can simply fill setup tables.
    Regards,
    Durgesh.
    Edited by: Durgesh Gandewar on Aug 30, 2011 10:29 AM

  • Table for shipping and billing documents ?

    hi experts,
    how can we come to know that what shipping (VL01n), and billing(VF01) documents has been created for any particular date.
    actually the problem is that i want to modify some documents that i have created a few days ago, plz help me?
    thanks in advance.

    Hi Vishal,
    Some of the tables for Delivery and Billing are LIKP, LIPS, VBRK, VBRP, ...
    If you want to modify document, modify at transaction level and it is not recommended to go and do the changes in the tables, as it is difficult to understand the impact of the same. if it is done at table level.
    Assuming that you want to amend the quantity in Delivery and billing of the same, some of the recommended options are:
    1. Cancel the Billing Document >> Reverse Post goods Issue >> make necessary changes in the quantity >> again do PGI >> Billing.
    2. Create a return document to for necessary quantity >> Return delivery >> Post Goods receipt >> Credit Note (optional)
    In the case of Price difference, follow the path of Debit Memo, Credit Memo or Invoice correction.
    Identify Standard solution, so that it will update all the tables and records necessary.
    Regards,
    Rajesh Banka

  • Table for preceding and Susequent documents  .

    hi experts,
    Please tell me the name of table which contains all preceding and subsequent documents of  purchase order or  sales order.
    Answer will be rewarded by Max points.
    regards,
    Sandeep

    Hi Vishal,
    Some of the tables for Delivery and Billing are LIKP, LIPS, VBRK, VBRP, ...
    If you want to modify document, modify at transaction level and it is not recommended to go and do the changes in the tables, as it is difficult to understand the impact of the same. if it is done at table level.
    Assuming that you want to amend the quantity in Delivery and billing of the same, some of the recommended options are:
    1. Cancel the Billing Document >> Reverse Post goods Issue >> make necessary changes in the quantity >> again do PGI >> Billing.
    2. Create a return document to for necessary quantity >> Return delivery >> Post Goods receipt >> Credit Note (optional)
    In the case of Price difference, follow the path of Debit Memo, Credit Memo or Invoice correction.
    Identify Standard solution, so that it will update all the tables and records necessary.
    Regards,
    Rajesh Banka

  • Table for Material and Inspecton lot together?

    Dear SAPIENTS,
    Please tell me table for Material and Inspecton lot together.
    Regards,
    Kaushal Rai

    Hi Kaushal,
    - Run trx QA08.
    - Select the option Activate inspection type. (This tab should be green)
    - Enter material type at least to not have a junk of data at a single execution. You can set other fields as per your requirement.
    - Check the Box "Assign Inspection type", Don't check/activate any of the rest three
    - Enter the inspection type, here is an limitation you can know the status inspection type by type.
    - Execute.
    - The system will give you the list of the materials that are note activated for the inspection type you feed in the selection screen.
    Hope it satisfy you. at the other way me and you both will search for the better option.
    Regards,
    Shyamal

  • Table for WBS project status and budget.

    hi,
    i am being requested to have a report with project details with the PO and PR.
    but i were unable to find the table for the project status (TECO, REL) for a WBS element. may i know want table and what field they were being link?
    aside, may i know under what table does the "budget assigned" to a WBS element located at?
    thanks

    Hi Ben,
    in order to retrieve the status of a WBS element, please select into table JEST by object number (JEST-OBJNR = PRPS-OBJNR). This will give you an internal status code (JEST-STAT). Then go to table TJ02 with this internal code and select field TJ02-TXT04: this will give you the external status code.
    For the budget, go to tables COSP and COSS, selecting by object number (OBJNR).
    I hope this helps. Best regards,
    Alvaro

  • Tables for DTP and Infopackage

    Hi ,
    My requirement is we need to write a custom ABAP Program to view properties and various tabs, details in the tab etc for DTP and Info package. So we need the list of tables or any sources from where the data is fetched for the each of details in DTP and Info packages.
    For example: Will get the Infopackage Data Selection details from table 'RSLDPSEL'. Like this we need table for each settings in Infopackage and DTP.
    Regards,
    Lavanya.

    HI,
    Infopackage related table:-
    RSLDPIO-     Links datasource to infopackages
    RSLDPIOT-infoPackage Text Description
    RSLDPRULE-ABAP source code for InfoPackages
    RSLDPSEL -Hardcoded selections in InfoPackages
    RSMONICDP-Contains the request-id number by data target
    RSPAKPOS-List of InfoPackage Groups / InfoPackages
    DTP Related Tables:-
    RSBKDTP       BW: Data Transfer Process Header Data
    RSBKDTPH      DTP: Historic Versions
    RSBKDTPSTAT      Status Information on Data Transfer Process
    RSBKDTPT      Texts on Data Transfer Processes
    RSBKDTPTH      Texts on Data Transfer Processes
    RSDDSTATDTP      Table for WHM Statistics. Details DTP
    RSOACUBE_DTP      BW: OLTP Direct Access: Directory of Assigned Remote DTPs
    RSBKDATAPAKSEL      DTP: Data Package Selections
    RSBKSELECT      Selections for DTP Request (Summary)
    RSBKREQUEST      DTP Request
    RSBKREQUEST_V      View of DTP Request
    RSBKBP      Breakpoints
    RSBKDATAINFO      Information on DTP Runtime Buffers
    RSBKDATAPAKID      DTP: Status Table for Data Packages
    RSBKSUBSTEP      Properties of Substeps in a DTP

Maybe you are looking for