Table for work center..........
Hi
Is there any table for work center which shows available capacity v/s utilized capacity......Please revert with your valuable comments
Rgds
Hi,
Check Table RC65L.
Regards
Kannan
Similar Messages
-
User Exit or DB-Table for Work Center (CR01)
Hi!
I have an external software which must be triggered when the user changes a work center in SAP (transaction CR01,CR02). I was looking for an user exit to do what ever is necessary but I couldn't find one.
So, does anybody know an user exit or BADI for work center?
Also possible:
The database table where work center are stored. So I could poll against this table and check if a work center was changed. I found the table SGOSHIST which log all modified objects in SAP. So this could maybe used to check for modified work center, I think.
Thanks,
Konrad> You can check the BADI definition from transaction SE18,
> 'LTRM_WORK_CNTR_DTRM', this might be helpful,
How can I check this BADI. If I use SE18, it doas not exist, buit if I try to create it, the system tells me that it already exists in the SAP Original System... and asks me if I want to create a copy of it! I don't know what to do at this point!
> Work center details are avilable in CRHD table, you can
> look for CR* from SE11 transaction,
I know, but if you change the description of the work center, it is stored in CRTX. there are a lot of CR* tables. It would be helpful to have a table which is updated every time a work center is modified!
Thanks,
Konrad -
Tables for routing (for work center)
hi friends,
I am doing report on routing but i did not get value for work center i got tables CRHD CRCA CRCO CRHH CRHS CRTX KAKO KAZY .
i try to get result by using link with PLPO and PLKO.
in TCode CA03 when i see the technical attributes it stors the dat ain structure PLPOD but i am unable to use it.
kindly can anybody tell me how to work center.
thanks & regards
Bhupinder Singh KalerHi Bhupi kaler,
try to link CRHD and PLKO with WERKS ( Plant ) field ane get the ARBPL ( Work center ).
Best regards,
raam -
ALE/iDoc for Work Center data transfer
Hello, community.
I am working on several interfaces for the PP and PM modules using iDocs/ALE.
One of the requirements is that only created and modified data must be distributed from R/3.
For Work Centers, we are using basic type LOIWCS02 and message type LOIWCS. We are generating iDocs through transaction POIM, which has two transfer modes: Complete (data for all Work Centers etc.) and Change (only new and updated data).
The Change Transfer Mode assumes you have set both Change Pointers and Change Documents for the objects to be transfered. Otherwise, it'll work just like the Complete Transfer Mode.
Our PP consultant told me there is no configuration to generate Change Documents for Work Center data modifications.
Can anybody give me other opinions? I'll resort to Z-table solutions only if I have no other options.Hi Danilo,
Do you know what the process codes are for
LOIWCS and LOIROU ?
Appreciate your help.
Thanks,
Gopi. -
Change log for work center data
Hi,
I was looking for the table where the change header document for the work center is stored.I was able to find a transation CR10 which shows the changes and also the database table CDHRD.
When I am trying to view the changes that were made to the work center I find that the data does not exist in the tables.
I was curious to know this as for some transaction the data is being logged in their respective change table but not for Work Center changes.
Can anyone tell me as to why this is happening.
What I think is that some changes to the configuration are required in order to log the changes in the database.
Kindly help.
Regards
VarunHi Wolfgang,
Thanks for the information.
However i have another question.
The change table will have data only when it is activated in the configuration menu.
However is there any other way by which we can capture the previous data for the work center e.g. the changed by field. I want that the names of the users who has changed the wrok center currently and the name of the person who previously made changes to it.
See if you can help me on that.
Regards
Varun -
Table of work center destribution
Hi PP experts,
Can anybody tell me what is the table of work center distribution field. In one customized report I can not link work center distribution field with routing operation field ( For ex. work center distribution A should assigned with it's routing opearation only )
Thanks in advance
Jayesh
SAP PPI am not able to be specific..please try these..CRCA Work Center Capacity Allocation
CRCIFOBJ Object IDs of changed capacities
CRCO Assignment of Work Center to Cost Center
CRHD Work Center Header
CRHH Hierarchy Header Data
CRHS Hierarchy Structure
CRID CIM Resource - Entities
CRTX Text for the Work Center or Production Resource/Too
KAKO Capacity Header Segment
KAKT Capacity Description
KAPA Shift Parameters for Available Capacity
KAPE Capacity unit of measure allocation
KAZY Interval of Available Capacity
T024C Planner Group for CAPP
T421 Wage groups
T421T Language-dependent texts for T421: Wage groups
T423 Wage group qualification
T423T Language-dependent texts for T423: Qualifications/W
T428 Setup Type Key
T428T Language-dependent texts for T428: Setup type key
T430 Operation/Activity control key
T430T Language-dependent text table for the control key T
T435 Standard texts for routing/ref. op set items
T435T Language-dependent texts for T435: Standard text ke
T499S Location
TC10 Initial values for CIM screen sequence....
karthick -
Can you please tell me what is the TABLE for 'Work Order'?
Regards,
Subhasishhi Subhasish Ganguly,
these are the tables of worked order which used in work order make and udates
AFIH, AUFM, PMCOQT, PMFLAGS, AFFL, AFKO, AFPO, AFVC .............
Hope i will help u.
with regard
chetan vishnoi -
Master Table for Work Items from BSP Application
hello guys,
just want to ask if there is a master table for work items (and other details) from BSP application?Hi,
Ya its true but i want to connect my customized application to UWL in Enterprise Portal and there after approval i want my workitems to be punched in R/3 system.Is there any source code available,so that my application directly contact UWL in sap enterprise Portal as a link or workitems where user should have an option to approve or reject.
If u have any idea plz let me know.
Thanks in Advance
Regards
Santosh Saraf -
Table for Profit center report grp
Dear Sapgurs,
in this t code GR55 system it showing list of Profit center report grps, can u please tell me what is the table for Table for Profit center report grp and how to create new profit center report group, Once we will click on F1 system it shows structure not tables.
Reg
Hanu
Moderator: Please, search SDN. This questions has been answered several times.EC-PCA (KE1) Profit Center Accounting
CEPC Profit Center Master Data Table MANDT / PRCTR / DATBI / KOKRS
CEPCT Texts for Profit Center Master Da MANDT / SPRAS / PRCTR / DATBI
CEPC_BUKRS Assignment of Profit Center to a MANDT / KOKRS / PRCTR / BUKRS
GLPCA EC-PCA: Actual Line Items RCLNT / GL_SIRID
GLPCC EC-PCA: Transaction Attributes MANDT / OBJNR
GLPCO EC-PCA: Object Table for Account MANDT / OBJNR
GLPCP EC-PCA: Plan Line Items RCLNT / GL_SIRID
thanks & Regards
Swathi
Edited by: swathi sajja on Aug 5, 2008 12:08 PM -
Tables for Work flow levels in IMA11
Dear Experts,
Can any one help me out in finding the tables for WORK FLOW Approval Levels and where these tables(standard tables in SAP) are stored in? or can anyone give me the list of tables for workflow in Investment management in IMA11 for approval levels?
Thanks,
sanju..Hi Sanju,
For IMA11, please refer the table IMAK.
Hope it will be useful. Appreciate with point if it is useful.
thanks
Vetrivelan -
Standard IDOC for WORK CENTER Master
Hi,
Please suggest the standard IDOC for work center master.
I have tried PWKC.Got DUMP when executed.
Tried on SAP-Market place for help.Suggested not to use PWLC.
Please suggest alternative.Will you please explain in a bit detail if LOIWCS01 or LOIWCS02 are transaction (as i tried to execute) or programs or please explain how to use these.(I executed from command prompt and SE38 but didnt helped)
-
Hello All
Am having a little concern regarding the number range for Work Center, kindly let me know where the number range for Work Center is maintained or from where it is picked up when we are using external no range assignment for Work Centers.
Regards,
J K TharwaniThanks Sir for your reply,
Actually the requirement is the client want that Equipment number must be the same as the Work Center Code, and Work Center code which i have decided is something like 0101001 & if i give the external no to the Equipment then the system doesnt take the same number instead it takes 101001 i.e. it ignores the initial "0" in the work center code. Actually I wanted to see the no range from where the work center numbering is being picked up, but later on i came to know that there is no such no range setting for work center instead it has contol from no range for object type. Shall look forward to your valuable inputs & guidance.
Regards,
J K Tharwani -
Customization Setting for Work center creation
Dear all,
What is the Customization Setting for Work center creation? How to do it?Hi,
Here are the few things you can check
OP40 : WC category
OP17 : Formula for WC
Person responsible : Plant Maintenance and Customer Service >> Maintenance Plans, Work Centers, Task Lists and PRTs >>Work Centers >>Define Employees Responsible for Work Centers
apart from above You can explore more in
Plant Maintenance and Customer Service >> Maintenance Plans, Work Centers, Task Lists and PRTs >>Work Centers
Riyaj -
Tables for Profit center and Risk Category
Hi,
Can anyone please tell me in which tables the values for profit center and risk category is maintained at.
Thanks
LilanHi Lilan,
Profit Centre's Data element is PRCTR. You can just press Where used button by going into SE11 and see in what scenario you need this field.
Because PRCTR field is maintained for Sales Order, Production Order tables and many other tables.
You need to look into ur requirement that what scenrio u are working in.
Please award points if helpful.
Regards,
Himanshu. -
REPORTS FOR WORK CENTER EFICIENCY
Hi All,
I´m trying to find reports that shows work center eficiency. Anyone knows any standard report like this?
Regards,
Felipe TavaresDear
If you are looking for Work Centre Effiency report , then you should check the Utilisation of Work Centre in production in every months or you can compare the production actual and planned by work centre to know the effiency .
Some of the standrd txn :
1.MCPQ
2.MCP7
Customised report : http://www.onestopsap.com/sap-PM/compare.asp or with the following SAP Table :
WERKS LIKE AUFK-WERKS, "Plant
AUFNR LIKE AFKO-AUFNR, "Prod. Order No.
PLNBEZ LIKE AFKO-PLNBEZ, "Header Material No.
GSTRI LIKE AFKO-GSTRI, "Actual Start Date
GLTRI LIKE AFKO-GLTRI, "Actual Finish Date
GAMNG LIKE AFKO-GAMNG, "Prod. Order Qty.
AUFPL LIKE AFKO-AUFPL, "Planned No. Of Operation
AUART LIKE AUFK-AUART, "Order Type
BUKRS LIKE AUFK-BUKRS, "Company Code
OBJNR LIKE AUFK-OBJNR, "Object No. For Order Status
KDAUF LIKE AUFK-KDAUF, "Sales Order No.
KDPOS LIKE AUFK-KDPOS, "Sales Order Status
IDAT2 LIKE AUFK-IDAT2, "Order Completion Date
ISM01 LIKE AFRU-ISM01, "Required Qty.
VGW01 LIKE AFVV-VGW01, "Quantity Withdrawn
VGE01 LIKE AFVV-VGE01, "Unit Of Measure
EFFPERC LIKE AFVV-VGW01, "Eficiency %age
MAKTX LIKE MAKT-MAKTX, "Material Descriptio
Try and come back
Regards
JH
Maybe you are looking for
-
Any solution to the lack of search in Outlook after installing Mountain Lion?
I just upgraded to Mountain Lion and now all the cool Outlook search features: Type a word in the search box Type from:"name" in the search box Don't work. Any ideas? Any sense of whether either MSFT or APPL are planning to address this?
-
Events,firing,listening-GUI/Networking seperation.
I'm having a little trouble finding info on how to write my own events, event listeners and then how to fire these events. Basically i want to listen on a socket for info and then fire an event. I want to have a JList listen for this event and update
-
Inc tax prices not showing??
I have a strange problem, for some reason the tax inc prices are not showing where they should. see site eg product: https://simona01.worldsecuresystems.com/simona/tops/black-and-white-spot-oversize-top In the large product page the inc tax price is
-
Mail not responding after update to 10.10.3
I am having problems with the mail and its not responding? any ideas? I tried deleting com.apple.mail.savedState method and it didn't work at all.
-
Process Order Creation - 'BAPI_PROCORD_CREATE'
HI All, I am trying to create a process order using BAPI 'BAPI_PROCORD_CREATE '. I have entered all the required data and I get an error '012Enter material no. or reference'. I donot want to use BAPI 'BAPI_PROCORD_CREATE_FROM_REF' as it only copies