Table Handling in XML Indesign Workflow

Hi all,
I have a question related to the table handling in XML workflow.
The XML file have been imported to indesign for pagination purpose. Once the XML file have been imported all the tables and figure are came in Text Streams as INLINE, to make the figures and tables as floats we are draging from the XML structure to make it as floating instead of Inline, this is working for Figure.
I am not able to drag the tables from the XML structure.
Please help us to make the table float, is there is any script to make the table float or any other way.......
kavya

Hi Kavya,
You have to create a dummy parent tag, now you can drag the parent tag to the frame.
Regards,
sudar

Similar Messages

Indesign XML-IN workflow - Anchoring issues

Hi all,
We are using Indesign CS5.5 and CS6.
For XML-IN workflow, we have developed a in-house tool for automation.
Marginal Notes: Using Script we drag the content from the XML tree and anchor it in Margin as per layout.
The issue here: In Pagination if they release the anchor the marginal content become Non-XML and wiped out from the XML tree.
Is there is any work-around to handle these types of issues.
Please advice.
Shaji

Hello Shaji.
As far as i know there is no solution for this. I'we been struggling with it for a while now. The only "workaround" i found was to use copy-paste instead of releasing the anchor:
Select the anchored frame, copy it, paste it in place, then remove the old anchor. It should create a new Story element in the XML tree.
It's not hard to script, if all you need is to release all anchors from the document/story, for example

Workflow Issue - Delivery address XML Reference workflow - Error

Hello All,
I am an ABAP developer, with very limited knowledge in Workflow, and I am stuck with an ongoing issue for quite sometime. We have a scenario where we need to a workflow triggers for a specific UNDATED sales order lines (identified by values in VBAP-Zfield ) in R/3 box, and it carries an XML request (probably mails it) to a SAP CRM destination, which would now update some CRM tables and generate a Call list in the SAP CRM box. This is one flow that used to be fine, but has stopped working since the past few months may because of some change, which is not yet identified. as multiple projects are working on the same boxes.
To elaborate -
1 - We have a SALESORDER_CREATEFROMDAT2 Idoc creating the SO, where in, based on a CUTOFF date condition, (if it is in the past), a VBAP-ZFIELD for the corresponding line is set to a value (08).
2 - This event is expected to trigger a workflow for the Undated order/Delivery resolution , which would then create an XML doc for the SO and send this across to CRM box
3 -This will then update a Ztable. This will be handled by a batch job in CRM to generate a call list.
Now we are facing a problem in the second step here, where in the activity - 'BCKGRD: Create XML_DOC for SO: xxxxxxxx' is completing successfully, but having a failure in the next step - 'Delivery address XML Reference workflow - ERROR'
This is how the detailed workflow log looks -
WF-BATCH                  Web work item created                               03.04.2014 08:12:29
WF-BATCH                  Execution started automatically                   03.04.2014 08:12:29
WF-BATCH                  CL_SWF_RUN_ALERT_ERROR                   03.04.2014 08:12:31
WF-BATCH                    IF_SWF_UTL_MAIL~SEND                      03.04.2014 08:12:31
WF-BATCH                  SWW_RI_EXECUTE_S                            03.04.2014 08:12:31
WF-BATCH                    SWW_RI_EXECUTE_S                           03.04.2014 08:12:31
WF-BATCH                  Execution started automatically                      03.04.2014 08:12:31
WFXML                     START_EXECUTION_IN_BACKGROUND            04.04.2014 04:00:35
WF-BATCH                  Execution started                                          04.04.2014 04:00:36
WF-BATCH                  CL_SWF_RUN_ALERT_ERROR                   04.04.2014 04:00:44
WF-BATCH                    IF_SWF_UTL_MAIL~SEND                   04.04.2014 04:00:44
WF-BATCH                  Execution started                                     04.04.2014 04:00:45
WF-BATCH                    SWW_RI_EXECUTE_S                       04.04.2014 04:00:45
I've also attached a screenshot for the errors, if that gives a clue.
Request all the workflow experts to help me with a solution, or an approach towards a fix.
Thanks & Regards,
S Sen.

Hi S Sen,
Agree with Ronen....no mail recipient or from 10 records of mail recipient - one record is empty.
Try to find out the intended email recipients....any data change there might have resulted in errors since few months. Maybe, some position got vacant, some config table to get the recipients got changed.....
regards,
Modak

InCopy/Indesign workflow for printed and folio mags?

We have a printed magazine that we also produce as folios for a DPS app. We produce the mag by using InCopy for text within the InDesign workflow. No problems there.
When finished (all edits completed) we produce the folio files but adding in all the links to twitter handles, URL's etc is proving tedious and timeconsuming for the editors and the designer. The editors (who use the print files and InCopy) produce a list in excel of the additions - they reference columns and paragraphs - which we don't use in the folio version. The designer then finds the spot after a lot of searching and then copies and pastes. All very tedious and a backward step in workflow.
Is there a way to include the "links" in an InCopy file that doesn't appear on the print PDF's yet apply correctly in the folios?

Use conditional text.
All interactive elements should be inline objects or simple hyperlinks that are tagged with a condition, then either showing or hidden depending on the article. Hide the interactive content when you create the PDF for print, and show the condition when adding or updating the article.
Anything you want to show/hide has to be part of a story — so text, inline objects, and anchored objects can all be used this way.
InCopy can see and apply conditional text, but cannot edit DPS-centric content such as an anchored MSO.
As always, using matching versions of ID/IC is important.

How to export table contents in xml file format through SQL queries

hi,
i need to export the table data in to xml file format. i got it through the GUI what they given.
i'm using Oracle 10g XE.
but i need to send the table name from Java programs. so, how to call the export commands from programming languages through. is there any sql commands to export the table contents in xml format.
and one more problem is i created each transaction in two tables. for example if we have a transaction 'sales' , that will be saved in db as
sales1 table and sales2 table. here i maintained and ID field in sales1 as PK. and id as FK in sales2.
i get the combined data with this query,
select * from sales1 s1, sales2 s2 where s1.id=s2.id order by s1.id;
it given all the records, but i'm getting two ID fields (one from each table). how to avoid this. here i dont know how many fields will be there in each table. that will be known at runtime only.
the static information is sales1 have one ID field with PK and sales2 will have one ID filed with FK.
i need ur valuable suggestions.
regards
pavan.

You can use DBMS_XMLGEN.getXML('your Query') for generating data in tables to XML format and you can use DBMS_XMLGEN.SETROWSETTAG to change the parent element name other wise it will give rowset as well as DBMS_XMLGEN.SETROWTAG for row name.
Check this otherwise XMLELEMENT and XMLFOREST function are also there to convert data in XML format.

How to insert data into a table from an xml document

using the XmlSql Utility, how do I insert data into a table from an xml document, using the sqlplus prompt.
if i use the xmlgen.insertXML(....)
requires a CLOB file, which i dont have, only the xml doc.
Cant i insert directly from the doc to the table?
the xmlgen examples I have seen first convert a table to a CLOB xmlString and then insert it into another table.
Isnt there any other way?

Your question is little perplexing.
If you're using XML SQL Utility from
the commandline, just use putXML.
java OracleXML putXML
null

How do I create a Table of Contents in InDesign CS6 for print that easily converts to epub?

How do I create a Table of Contents in InDesign CS6 for a print book that easily converts to epub?
Can anyone point me to a link for a step-by-step (not a video) on setting up all the elements of a print book properly (pages, table of contents and index) so they will convert and reflow perfectly from print to epub in InDesign CS6. This is not about building an ebook from ground up, but taking 50 backlisted print books (converted from old versions of Quark to InDesign) that now need to be converted to epub formats.
OR could someone point me to the link in the Adobe InDesign CS6 support that explains how to create a Table of Contents for a print book (5.5" x 8.5", 288 pages), one that will convert when the file is converted to ePub (for MAC OSX)?
Just downloaded the 706 page inDesign CS6 reference manual from Adobe <http://helpx.adobe.com/pdf/indesign_reference.pdf> but there's not even a search feature on the pdf file.
Up until this week, we have only done print books, creating the TOC the old fashioned way, as a fixed page, comprised of two columns: page numbers and chapters/subject. The files I have created are taken by our printer and printed beautifully.
However, when I convert the same book to epub in CS6, the character and paragraph styles converted beautifully - but everything else is all over the place! The table of contents is on different pages, the columns split apart. That goes for the page contents as well - everything is all over the place. when it's converted to a pdf -- total perfection. Never any problems converting with perfection to pdf format and reading those on the various readers.
(Thank you so much in advance for any help).

<http://helpx.adobe.com/pdf/indesign_reference.pdf> Adobe Digital Reader does have a search feature for reading pdfs. Found the TOC instructions on page 176 of 706 pages.

Creating a Pivot Table in a XML publishe

When creating a Pivot Table in a XML publisher in Word, is there a way for a Pivot table to respect the fact that it's inside of a group function? I'm looping over site , and within each site I want to create a Pivot Table that has Months going across and SUB inventories going down, but only for that site.

Hello,
create one column in criteria and change it's fx to case when 1=0 then Products."Prod Name" else 'Tota Loanl' end
Now go to pivot and drag this column to Columns block of pivot. But keep this column up of Measure Labels and Now, go to column Format values.
Mention cell horizontal alignment to Center
see the following screenshot, Header is the column i created with the above functionality.
!http://i852.photobucket.com/albums/ab83/kishorg86/Header.jpg!

Inserting data from a table to an XML file

I want to insert the values from this xml file emp.xml into a table Employees :
<EMPLOYEES>
<EMP>
<EMPNO>7369</EMPNO>
<ENAME>SMITH</ENAME>
<JOB>CLERK</JOB>
<HIREDATE>17-DEC-80</HIREDATE>
<SAL>800</SAL>
</EMP>
<EMP>
<EMPNO>7499</EMPNO>
<ENAME>ALLEN</ENAME>
<JOB>SALESMAN</JOB>
<HIREDATE>20-FEB-81</HIREDATE>
<SAL>1600</SAL>
<COMM>300</COMM>
</EMP>
<EMP>
</EMPLOYEES>
and here is my Employee table in Oracle 9i database
SQL> DESC EMPLOYEE;
Name Null? Type
EMPNO NUMBER
EMPNAME VARCHAR2(10)
JOB VARCHAR2(10)
HIREDATE DATE
SAL NUMBER
After getting help from the members i was able to do the insert of data from the xml file to the table..how to do the insert of data from the table to the xml file.
Regards,
Renu

Hello michaels , thank you for the solution, still i am having some problems
Here is what i have done :
1.
SQL> CREATE DIRECTORY my_table_dir AS 'E:\table_files'
2 ;
Directory created.
2.
SQL> select * from myemp;
ENAME
SMITH
ALLEN
3.
This is the content of the existing xml file saved in the directory E:\table_files as emp.xml
<EMPLOYEES>
<EMP>JIM</EMP>
<EMP>RICK</EMP>
</EMPLOYEES>
4.
Now i executed this code :
declare
emp_xml xmltype;
begin
select sys_xmlagg (column_value, sys.xmlformat ('EMPLOYEES')) emp_xml
into emp_xml
from table (xmlsequence (cursor (select *
from myemp
where ename in ('SMITH', 'ALLEN')),
sys.xmlformat ('EMP')
dbms_xslprocessor.clob2file (emp_xml.getclobval (), 'E:\table_files', 'emp.xml');
end;
And the Error i got is :
declare
ERROR at line 1:
ORA-29280: invalid directory path
ORA-06512: at "SYS.UTL_FILE", line 18
ORA-06512: at "SYS.UTL_FILE", line 424
ORA-06512: at "XDB.DBMS_XSLPROCESSOR", line 46
ORA-06512: at line 12

ORA-19007 when coping a table with an xml type in it to a new schema in the

ORA-19007 when coping a table with an xml type in it to a new schema in the same database.
Hi all,
When I copy a table with an xml type in it to a new schema in the same database I get an ora-19009.
The setup is as follows I have a schema a with table TABLE_WITH_XMLTYPE where data is:
CREATE
TABLE TABLE_WITH_XMLTYPE
FOLDER_ID NUMBER (10, 0) NOT NULL,
SEARCH_PROPERTIES XMLTYPE ,
CONSTRAINT TABLE_WITH_XMLTYPE PK PRIMARY KEY (FOLDERID) USING INDEX
XMLTYPE COLUMN SEARCH_PROPERTIES XMLSCHEMA
"http://xxxxxxx.net/FolderProperties.xsd" element "FolderProperties"
VARRAY SEARCH_PROPERTIES."XMLDATA"."PROPERTIES"."PROPERTY" STORE AS TABLE
PROPERTY_TABLE
(PRIMARY KEY (NESTED_TABLE_ID, ARRAY_INDEX)) ORGANIZATION INDEX OVERFLOW
Both schemas have the following xml schema registered as a local xml schema
BEGIN
DBMS_XMLSCHEMA.registerSchema(
SCHEMAURL => 'http://xxxxxxx.net/FolderProperties.xsd',
SCHEMADOC =>
'<xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema"
xmlns:xdb="http://xmlns.oracle.com/xdb"
xdb:storeVarrayAsTable="true">
<xs:element name="FolderProperties"
type="FolderPropertiesType"
xdb:defaultTable="FOLDER_SEARCH_PROPERTIES" />
<xs:complexType name="FolderPropertiesType" xdb:SQLType="FOLDERPROPERTIES_T">
<xs:sequence>
<xs:element name="FolderID" type="FolderIDType" minOccurs="1" xdb:SQLName="FOLDER_ID"/>
<xs:element name="Properties" type="PropertiesType" xdb:SQLName="PROPERTIES"/>
</xs:sequence>
</xs:complexType>
<xs:complexType name="PropertiesType" xdb:SQLType="PROPERTIES_T">
<xs:sequence>
<xs:element name="Property" type="PropertyType" maxOccurs="unbounded"
xdb:SQLName="PROPERTY" xdb:SQLCollType="PROPERTY_V"/>
</xs:sequence>
</xs:complexType>
<xs:complexType name="PropertyType" xdb:SQLType="PROPERTY_T">
<xs:sequence>
<xs:element name="DateValue" type="DateType" xdb:SQLName="DATE_VALUE"/>
<xs:element name="NumValue" type="NumType" xdb:SQLName="NUM_VALUE"/>
<xs:element name="StringValue" type="StringType" xdb:SQLName="STRING_VALUE"/>
</xs:sequence>
<xs:attribute name="Name" xdb:SQLName="NAME" xdb:SQLType="VARCHAR2">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:minLength value="1"/>
<xs:maxLength value="255"/>
</xs:restriction>
</xs:simpleType>
</xs:attribute>
</xs:complexType>
<xs:simpleType name="FolderIDType">
<xs:restriction base="xs:integer"/>
</xs:simpleType>
<xs:simpleType name="DateType">
<xs:restriction base="xs:dateTime"/>
</xs:simpleType>
<xs:simpleType name="NumType">
<xs:restriction base="xs:decimal"/>
</xs:simpleType>
<xs:simpleType name="StringType">
<xs:restriction base="xs:string" />
</xs:simpleType>
</xs:schema>',
LOCAL => TRUE,
GENTYPES => TRUE,
GENTABLES => FALSE);
END;
when I try to do the following insert:
insert into schemaB.TABLE_WITH_XMLTYPE ( FOLDER_ID, SEARCH_PROPERTIES)
select FOLDER_ID, SEARCH_PROPERTIES from schemaB.TABLE_WITH_XMLTYPE;
I’ll get an ora-19007.
Can some one point me in the right direction how to solve this error.
Thanks Roelof.

Who did you create the second table, in other words, how did you COPY the table as you said...
If you created the second table via a CTAS (create table as select) then you will have created a table that is not the same as the original one. AFAIK I have once created an enhancement request for this after discovering that JDeveloper, for example, creates a "copy" via a CTAS which creates the wrong structure. Double check via package DBMS_METADATA.
SQL> set long 1000000
SQL> select DBMS_METADATA('TABLE','TABLE_WITH_XMLTYPE','SchemaA') from dual;
SQL> select DBMS_METADATA('TABLE','TABLE_WITH_XMLTYPE','SchemaB') from dual;If you have got two different tables, than Mark's solution should help.
M.
Edited by: Marco Gralike on Feb 15, 2009 11:16 AM

ORA-00942 error on truncating a table with a XML Index

Oracle Version: 11.2.0.1.0
When truncate command fails with error "ORA-00942: table or view does not exist" when run against a table with an XML Index defined
SQL> CREATE TABLE XML_TEST
2 (
3 ID INTEGER,
4 TESTXML SYS.XMLTYPE
5 );
Table created.
SQL> truncate table XML_TEST;
Table truncated.
SQL> CREATE INDEX xmlindex ON XML_TEST(TESTXML)
2 indextype IS xdb.xmlindex
3 parameters ('PATH TABLE MY_PATH_TABLE');
Index created.
SQL> truncate table XML_TEST;
truncate table XML_TEST
ERROR at line 1:
ORA-00942: table or view does not exist
SQL> Drop Index xmlindex;
Index dropped.
SQL> truncate table XML_TEST;
Table truncated.

No, I don't think that explanation is correct. I don't think it has to do with user privs. besides, we don't
adjust rowids on an import -- we recreate the index, just like a b-tree index import would.
This should be working. It's most likely a bug in our (i.e. Text) import code -- SYS.XMLTYPE is a little
strange because under the covers it's actually a function-based index.
I will test it out and file a bug if I can reproduce the behavior on solaris.

Internal Table Data to XML

Hi
I have a requirement of writing internal table data to XML. Any idea where i should start.
I have pretty good experience with ABAP and basic knowledge in XML.
There are good blogs which talk about transformations and other stuff but they are not able to give me clear path to my solution.
Could somebody give me a basic example or some reference material where i can move the data in internal table (assume Sales order details of a day) to XML.
Thanks

Refer the program -
In this implementation we will only focus on the creation of the XML file and the transfer to the user. You can not create a XML document directly. You have to use a so called ixml factory first.
TYPE-POOLS: ixml.
DATA: l_ixml TYPE REF TO if_ixml.
l_ixml = cl_ixml=>create( ).
This iXML factory can create an empty XML document object named l_document.
DATA: l_document TYPE REF TO if_ixml_document.
        l_document = l_ixml->create_document( ).
At this point you can add the nodes (elements, attributes) into the document. First you have to declare the root element node.
DATA: l_element_root TYPE REF TO if_ixml_element.
This node we have to give a name and add it (create_simple_node) to the document object l_document, which will be the parent of this node.
l_element_root = l_document->create_simple_element(
            name = 'flights'
          parent = l_document ).
Next we can add child nodes to there parent node using the same method of the document object.
DATA: l_element_airline TYPE REF TO if_ixml_element,
l_element_airline = l_document->create_simple_element(
               name = 'airline'
             parent = l_element_root ).
An attribute can be add easily using the method set_attribute of the element node.
l_rc = l_element_airline->set_attribute( name = 'code' value = 'LH401' ).
Now we have finished the document object. Regretfully it can not be displayed in any form due to the fact that it is a binary object.
The next step is to convert the created document to a flat file. To achieve this we have to create a stream factory, which will help us to create an output stream.
DATA: l_streamfactory   TYPE REF TO if_ixml_stream_factory.
l_streamfactory = l_ixml->create_stream_factory( ).
In this case, we will convert the document into an output stream which is based on an internal table of type x.
TYPES: BEGIN OF xml_line,
          data(256) TYPE x,
        END OF xml_line.
DATA: l_xml_table       TYPE TABLE OF xml_line,
        l_xml_size        TYPE i,
        l_rc              TYPE i,
        l_ostream         TYPE REF TO if_ixml_ostream.
l_ostream = l_streamfactory->create_ostream_itable( table = l_xml_table ).
When we have created the output stream we can do the rendering from the document into the stream. The XML data will be stored in the internal table automatically.
DATA: l_renderer        TYPE REF TO if_ixml_renderer.
l_renderer = l_ixml->create_renderer( ostream = l_ostream
                        & nbsp;              document = l_document ).
l_rc = l_renderer->render( ).
In the last step we upload the file to the sapgui
l_xml_size = l_ostream->get_num_written_raw( ).
CALL METHOD cl_gui_frontend_services=>gui_download
   EXPORTING
     bin_filesize = l_xml_size
     filename     = 'c:\temp\flights.xml'
     filetype     = 'BIN'
   CHANGING
     data_tab     = l_xml_table
   EXCEPTIONS
     OTHERS       = 24.
This finished the first step-of-three. As mentioned before the next log will focus on the conversion from xml files (back) to abap tables.
REPORT z_xit_xml_dom_create.
TYPE-POOLS: ixml.
TYPES: BEGIN OF xml_line,
          data(256) TYPE x,
         END OF xml_line.
DATA: l_ixml            TYPE REF TO if_ixml,
        l_streamfactory   TYPE REF TO if_ixml_stream_factory,
        l_ostream         TYPE REF TO if_ixml_ostream,
        l_renderer        TYPE REF TO if_ixml_renderer,
        l_document        TYPE REF TO if_ixml_document.
DATA: l_element_flights TYPE REF TO if_ixml_element,
        l_element_airline TYPE REF TO if_ixml_element,
        l_element_flight TYPE REF TO if_ixml_element,
        l_element_from    TYPE REF TO if_ixml_element,
        l_element_to      TYPE REF TO if_ixml_element,
        l_element_dummy   TYPE REF TO if_ixml_element,
        l_value           TYPE string.
DATA: l_xml_table       TYPE TABLE OF xml_line,
        l_xml_size        TYPE i,
        l_rc              TYPE i.
DATA: lt_spfli          TYPE TABLE OF spfli.
DATA: l_spfli           TYPE spfli.
START-OF-SELECTION.
Fill the internal table
    SELECT * FROM spfli INTO TABLE lt_spfli.
Sort internal table
    SORT lt_spfli BY carrid.
Start filling xml dom object from internal table
    LOOP AT lt_spfli INTO l_spfli.
      AT FIRST.
      Creating a ixml factory
        l_ixml = cl_ixml=>create( ).
      Creating the dom object model
        l_document = l_ixml->create_document( ).
      Fill root node with value flights
        l_element_flights = l_document->create_simple_element(
                    name = 'flights'
                    parent = l_document ).
      ENDAT.
      AT NEW carrid.
      Create element 'airline' as child of 'flights'
        l_element_airline = l_document->create_simple_element(
                    name = 'airline'
                    parent = l_element_flights ).
      Create attribute 'code' of node 'airline'
        l_value = l_spfli-carrid.
        l_rc = l_element_airline->set_attribute( name = 'code' value = l_value ).
      Create attribute 'name' of node 'airline'
        SELECT SINGLE carrname FROM scarr INTO l_value WHERE carrid EQ l_spfli-carrid.
        l_rc = l_element_airline->set_attribute( name = 'name' value = l_value ).
      ENDAT.
      AT NEW connid.
      Create element 'flight' as child of 'airline'
        l_element_flight = l_document->create_simple_element(
                    name = 'flight'
                    parent = l_element_airline ).
      Create attribute 'number' of node 'flight'
        l_value = l_spfli-connid.
        l_rc = l_element_flight->set_attribute( name = 'number' value = l_value ).
      ENDAT.
    Create element 'from' as child of 'flight'
      CONCATENATE l_spfli-cityfrom ',' l_spfli-countryfr INTO l_value.
      l_element_from = l_document->create_simple_element(
                  name = 'from'
                  value = l_value
                  parent = l_element_flight ).
    Create attribute 'airport' of node 'from'
      l_value = l_spfli-airpfrom.
      l_rc = l_element_from->set_attribute( name = 'airport' value = l_value ).
    Create element 'to' as child of 'flight'
      CONCATENATE l_spfli-cityto ',' l_spfli-countryto INTO l_value.
      l_element_to = l_document->create_simple_element(
                  name = 'to'
                  value = l_value
                  parent = l_element_flight ).
    Create attribute 'airport' of node 'from'
      l_value = l_spfli-airpto.
      l_rc = l_element_to->set_attribute( name = 'airport' value = l_value ).
    Create element 'departure' as child of 'flight'
      l_value = l_spfli-deptime.
      l_element_dummy = l_document->create_simple_element(
                  name = 'departure'
                  value = l_value
                  parent = l_element_flight ).
    Create element 'arrival' as child of 'flight'
      l_value = l_spfli-arrtime.
      l_element_dummy = l_document->create_simple_element(
                  name = 'arrival'
                  value = l_value
                  parent = l_element_flight ).
    Create element 'type' as child of 'flight'
      CASE l_spfli-fltype.
        WHEN 'X'.
          l_value = 'Charter'.
        WHEN OTHERS.
          l_value = 'Scheduled'.
      ENDCASE.
      l_element_dummy = l_document->create_simple_element(
                  name = 'type'
                  value = l_value
                  parent = l_element_flight ).
    ENDLOOP.
    IF sy-subrc NE 0.
      MESSAGE 'No data into db table ''spfli'', please run program ''SAPBC_DATA_GENERATOR'' with transaction ''SA38''' TYPE 'E'.
    ENDIF.
Creating a stream factory
    l_streamfactory = l_ixml->create_stream_factory( ).
Connect internal XML table to stream factory
    l_ostream = l_streamfactory->create_ostream_itable( table = l_xml_table ).
Rendering the document
    l_renderer = l_ixml->create_renderer( ostream = l_ostream
                                          document = l_document ).
    l_rc = l_renderer->render( ).
Saving the XML document
    l_xml_size = l_ostream->get_num_written_raw( ).
    CALL METHOD cl_gui_frontend_services=>gui_download
      EXPORTING
        bin_filesize = l_xml_size
        filename     = 'c:\temp\flights.xml'
        filetype     = 'BIN'
      CHANGING
        data_tab     = l_xml_table
      EXCEPTIONS
        OTHERS       = 24.
    IF sy-subrc <> 0.
      MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
<?xml version="1.0"?>
<flights>
     <airline code="AA" name="American Airlines">
          <flight number="0017">
               <from airport="JFK">NEW YORK,US</from>
               <to airport="SFO">SAN FRANCISCO,US</to>
               <departure>110000</departure>
               <arrival>140100</arrival>
               <type>Scheduled</type>
          </flight>
          <flight number="0064">
               <from airport="SFO">SAN FRANCISCO,US</from>
               <to airport="JFK">NEW YORK,US</to>
               <departure>090000</departure>
               <arrival>172100</arrival>
               <type>Scheduled</type>
          </flight>
     </airline>
     <airline code="AZ" name="Alitalia">
          <flight number="0555">
               <from airport="FCO">ROME,IT</from>
               <to airport="FRA">FRANKFURT,DE</to>
               <departure>190000</departure>
               <arrival>210500</arrival>
               <type>Scheduled</type>
          </flight>
          <flight number="0788">
               <from airport="FCO">ROME,IT</from>
               <to airport="TYO">TOKYO,JP</to>
               <departure>120000</departure>
               <arrival>085500</arrival>
               <type>Scheduled</type>
          </flight>
          <flight number="0789">
               <from airport="TYO">TOKYO,JP</from>
               <to airport="FCO">ROME,IT</to>
               <departure>114500</departure>
               <arrival>192500</arrival>
               <type>Scheduled</type>
          </flight>
          <flight number="0790">
               <from airport="FCO">ROME,IT</from>
               <to airport="KIX">OSAKA,JP</to>
               <departure>103500</departure>
               <arrival>081000</arrival>
               <type>Charter</type>
          </flight>
     </airline>
     <airline code="DL" name="Delta Airlines">
          <flight number="1984">
               <from airport="SFO">SAN FRANCISCO,US</from>
               <to airport="JFK">NEW YORK,US</to>
               <departure>100000</departure>
               <arrival>182500</arrival>
               <type>Scheduled</type>
          </flight>
          <flight number="1699">
               <from airport="JFK">NEW YORK,US</from>
               <to airport="SFO">SAN FRANCISCO,US</to>
               <departure>171500</departure>
               <arrival>203700</arrival>
               <type>Scheduled</type>
          </flight>
          <flight number="0106">
               <from airport="JFK">NEW YORK,US</from>
               <to airport="FRA">FRANKFURT,DE</to>
               <departure>193500</departure>
               <arrival>093000</arrival>
               <type>Scheduled</type>
          </flight>
     </airline>
     <airline code="JL" name="Japan Airlines">
          <flight number="0407">
               <from airport="NRT">TOKYO,JP</from>
               <to airport="FRA">FRANKFURT,DE</to>
               <departure>133000</departure>
               <arrival>173500</arrival>
               <type>Scheduled</type>
          </flight>
          <flight number="0408">
               <from airport="FRA">FRANKFURT,DE</from>
               <to airport="NRT">TOKYO,JP</to>
               <departure>202500</departure>
               <arrival>154000</arrival>
               <type>Charter</type>
          </flight>
     </airline>
     <airline code="LH" name="Lufthansa">
          <flight number="2407">
               <from airport="TXL">BERLIN,DE</from>
               <to airport="FRA">FRANKFURT,DE</to>
               <departure>071000</departure>
               <arrival>081500</arrival>
               <type>Scheduled</type>
          </flight>
          <flight number="2402">
               <from airport="FRA">FRANKFURT,DE</from>
               <to airport="SXF">BERLIN,DE</to>
               <departure>103000</departure>
               <arrival>113500</arrival>
               <type>Scheduled</type>
          </flight>
          <flight number="0402">
               <from airport="FRA">FRANKFURT,DE</from>
               <to airport="JFK">NEW YORK,US</to>
               <departure>133000</departure>
               <arrival>150500</arrival>
               <type>Charter</type>
          </flight>
          <flight number="0401">
               <from airport="JFK">NEW YORK,US</from>
               <to airport="FRA">FRANKFURT,DE</to>
               <departure>183000</departure>
               <arrival>074500</arrival>
               <type>Scheduled</type>
          </flight>
          <flight number="0400">
               <from airport="FRA">FRANKFURT,DE</from>
               <to airport="JFK">NEW YORK,US</to>
               <departure>101000</departure>
               <arrival>113400</arrival>
               <type>Scheduled</type>
          </flight>
     </airline>
     <airline code="QF" name="Qantas Airways">
          <flight number="0005">
               <from airport="SIN">SINGAPORE,SG</from>
               <to airport="FRA">FRANKFURT,DE</to>
               <departure>225000</departure>
               <arrival>053500</arrival>
               <type>Scheduled</type>
          </flight>
          <flight number="0006">
               <from airport="FRA">FRANKFURT,DE</from>
               <to airport="SIN">SINGAPORE,SG</to>
               <departure>205500</departure>
               <arrival>150500</arrival>
               <type>Scheduled</type>
          </flight>
     </airline>
     <airline code="SQ" name="Singapore Airlines">
          <flight number="0988">
               <from airport="SIN">SINGAPORE,SG</from>
               <to airport="TYO">TOKYO,JP</to>
               <departure>163500</departure>
               <arrival>001500</arrival>
               <type>Scheduled</type>
          </flight>
          <flight number="0158">
               <from airport="SIN">SINGAPORE,SG</from>
               <to airport="JKT">JAKARTA,ID</to>
               <departure>152500</departure>
               <arrival>160000</arrival>
               <type>Scheduled</type>
          </flight>
          <flight number="0015">
               <from airport="SFO">SAN FRANCISCO,US</from>
               <to airport="SIN">SINGAPORE,SG</to>
               <departure>160000</departure>
               <arrival>024500</arrival>
               <type>Scheduled</type>
          </flight>
          <flight number="0002">
               <from airport="SIN">SINGAPORE,SG</from>
               <to airport="SFO">SAN FRANCISCO,US</to>
               <departure>170000</departure>
               <arrival>192500</arrival>
               <type>Scheduled</type>
          </flight>
     </airline>
     <airline code="UA" name="United Airlines">
          <flight number="0941">
               <from airport="FRA">FRANKFURT,DE</from>
               <to airport="SFO">SAN FRANCISCO,US</to>
               <departure>143000</departure>
               <arrival>170600</arrival>
               <type>Scheduled</type>
          </flight>
          <flight number="3504">
               <from airport="SFO">SAN FRANCISCO,US</from>
               <to airport="FRA">FRANKFURT,DE</to>
               <departure>150000</departure>
               <arrival>103000</arrival>
               <type>Scheduled</type>
          </flight>
          <flight number="3516">
               <from airport="JFK">NEW YORK,US</from>
               <to airport="FRA">FRANKFURT,DE</to>
               <departure>162000</departure>
               <arrival>054500</arrival>
               <type>Scheduled</type>
          </flight>
          <flight number="3517">
               <from airport="FRA">FRANKFURT,DE</from>
               <to airport="JFK">NEW YORK,US</to>
               <departure>104000</departure>
               <arrival>125500</arrival>
               <type>Scheduled</type>
          </flight>
     </airline>
</flights>
Regards,
Amit
Reward all helpful replies.

Internal table data to XML file.

Hi All,
May I know how can we convert the internal table data to xml file?
Regards
Ramesh.

Re: Convert XML to internal Table
Go through the link..u should be able to solve the problem..

Build a table based on XML data set with Spry

Hi there,
I'm new to spry technology therefore forgive any basic question of mine.
I'm trying to fill content in a table based on XML data set values but nothing is shown :-(
here is my code.... any suggestion? pls tell me where I'm wrong.
Thank you in advance
<script src="SpryAssets/xpath.js" type="text/javascript"></script>
<script src="SpryAssets/SpryData.js" type="text/javascript"></script>
<script type="text/javascript">
var uscite = new Spry.Data.XMLDataSet("data/Calendario 2011.xml", "csv_data_records/record", {sortOnLoad: "Date", sortOrderOnLoad: "ascending"});
uscite.setColumnType("Date", "date");
uscite.setColumnType("km", "number");
</script>
<div class="RankContainer" id="UsciteDiv" spry:region="uscite" >
          <table width="100%" border="0" class="RankTable">
            <tr>
              <th width="10%" scope="col" spry:sort="Date">Data</th>
              <th width="20%" scope="col">Destinazione</th>
              <th width="5%" scope="col">KM</th>
              <th width="35%" scope="col">Percorso</th>
              <th width="30%" scope="col">Breve</th>
             
            </tr>
            <tr>
               <script type="text/javascript">
       var rows = uscite.getData();
    for (var i = 0; i < rows.length; i++)
     if (rows[i]["Mappa"].startsWith("/"))
      rowContent = "<td> si </td>";
     else
          rowContent = "<td> no </td>";
     document.write("<td>{Date}</td>");
     document.write("<td>"+rowContent+"</td>");
     document.write("<td>{km}</td>");
     document.write("<td>{Percorso}</td>");
     document.write("<td>{Breve}</td>");
      </script>
           </tr>
          </table>
       </div>

Sure this is how it should work (except that no anchor tag shall be present for Destinazione whereas Mappa has no real value in)
http://www.gsc-borsano.it/_Calendario%202011.html
and this is the non working page
http://www.gsc-borsano.it/_v2Calendario%202011.html
Thanks

Exception handling in IDOC using workflows

exeception handling in idoc using workflows
i. what will be the trigerring event in case of idoc ?
ii.will it be BOR -- IDOC<message_type >?
thanks in advance
naval bhatt

Hi Naval Bhatt,
it depends on what you would like to do, but there is an object IDOCAPPL, more information you find Objekttyp IDOC<MSGTYP>:
http://help.sap.com/saphelp_47x200/helpdata/en/04/92725546f311d189470000e829fbbd/frameset.htm
General how it works:
Objects, Events and Tasks to be Created
http://help.sap.com/saphelp_47x200/helpdata/en/78/2176d251ce11d189570000e829fbbd/frameset.htm
This is an example how the application should implement the exception handling in IDOC by using workflows.
Events for example:
- inputErrorOccurred
- inputFinished
Regards
Tibor

Table Handling in XML Indesign Workflow

Similar Messages

Maybe you are looking for