Table has too many columns for one pg in InDesign document. How do I force a break?
I have imported an Excel table into my InDesign document. The table is 598 columns wide. Obviously this isn't fitting on one page. I want it to just keep flowing from page to page, keeping one same column at the beginning of each page (like "freeze panes" does in Excel) but it's not doing that. Is this possible in my InDesign document or will I have to manually copy and paste 10 columns at a time, which is about how many are fitting on one page? Any searches I do on this subject just talk about flowing rows but nothing about columns.
As far as I know there's probably no way ID is going to do what you want.
You can place a table across a multiple page spread, but the odds of being able to do that and still keep the file printable are marginal, at best. You can't for example, leave blank space at the gutters unless you are able to add a blank column that spans the gutter, and the limt for multipage spreads is 10 pages wide, whcih doesn't sound like it's probably enough to hold almost 600 columns.
Perhaps placing the table using named ranges of appropriate widths would work...
Similar Messages
-
Hello,
I'm in the process of converting an Access 2010 database into a web database and I'm having some trouble. I have a table which has 236 fields, which is more than the 220 field limit for web-compatible tables. I have tried to split this table into two tables
with a one-to-one relationship, but web tables can only use lookups as relationships. I've tried to connect the tables with a lookup and then synthesize a one-to-one relationship by using data macros but I'm not having much luck.
I realize that 236 fields is a lot, but it must be set up this way because each field represents a tasks and is a yes/no box to verify that the task has been completed - and the records are different employees for whom which the tasks need to be completed.
Could someone please help me figure out a way to make this table web compatible?
Thank you,
RyanHi,
I found that you've cross post the quesion on our Answer forum, are you satisfiled the reply from there?
http://answers.microsoft.com/en-us/office/forum/office_2010-access/access-2010-table-has-too-many-fields-for-web/06ee81ea-24ab-48b8-9b8f-0ed08a868bac
Regards,
George Zhao
TechNet Community Support -
Too many columns for Custom report
Hi,
I'm building a custom XML Publishe report, the O/P will be in excel format.
Problem is that i have too many columns...around 30 which are extracted to excel sheet.
How should i create RTF file with these many columns?
Any suggestion?
Database:10g
Thanks.Hi,
try the Oracle BI Publisher forum (BI Publisher as you are using XML Publisher.
Regards, Roberto -
Split row in two rows (Table with too many columns)
Hello,
I have a small problem. I have a table with several columns. As all the columns do not fit with the correct width, the format is very ugly. Since leaving all data in a row is very small, I like to cut a line into two, namely:
- For example if I have a table with 10 columns, I would leave in the first row 7 columns (for that look good data) and the next row only the remaining 3 columns. Thus each row of the original table, occupy two rows on the form.
Thank you very much beforehandhello
thanks for the reply, will be very helpful.
Regarding links to examples, I do not relate to this problem, these are not correct, you must have confused the link.
thanks! -
WHEN I TRY TO BURN MUSIC FROM MY PLAYLIST TO A BLANK CD, THE NOTIFICATION COMES UP AND TELLS ME I AM EXCEEDING THE NUMBER OF MINUTES THE CD WILL HOLD. THIS NOTIFICATION HAPPENS EVEN IF I TRY TO BURN JUST ONE SONG. WHAT'S GOING ON?
Katy, you are completely doing things in the wrong order. You can't burn songs if you can't even play them, and iTunes can't play them if it can't find them.
The exclamation point normally occurs if the song file, or one of its containing folders, has been moved, renamed or deleted. So if you encounter a track with an exclamation point, don't do anything else until you find the file. It is usually somewhere else on your hard drive, or else in the Recycle bin. Failing both of those, get it from your most recent backup.
After your restore it, make sure it can play. If it can play you can put it into a playlist. Then you can burn the playlist. -
Pause Backup of itunes library, too many DVDs for one sitting?
The backup of my itunes library will take 8 DVDs. Is there a way to pause it, so that I don't have to do it in one sitting? Or choose to do a partial backup now, and then continue later? What would happen if I only had time to do 2 DVDs today, could I come back later and continue, or would I have to start all over again?
Thank you for your help.Thank you very much for your reply. I am using "Backup" in applications. I am not sure if this is a feature of my .mac account or if it came with my computer.
Is using iTunes to backup better? I have not seen a feature in Backup to choose to backup portions of my library, but you are saying that backing up in iTunes, has this feature?
Thanks again. -
Too Many Photos for one album - How do I create a 2nd album w/o losing my work?
I had no idea there was a 100 page cap on photo albums. I was ¾ of the way through a photo album when I hit the 100 pp. ceiling. Now I want to divide my event into two separate albums, without re-doing all my work. Any suggestions?
This worked perfectly, Terence, thanks so much for the suggestion!
-
Too many columns to be shown in the Enterprise Manager 11g?
Hello,
we are having some problems with the Enterprise Manager 11g. When we want to VIEW DATA of a specific table, we get this exception. We think that our table has too many columns to be displayed. If we delete some of the columns, the data is shown in the enterprise manager. But this cannot be a solution for us. Can you help us with this point?
2009-08-03 10:07:04,210 [EMUI_10_07_04_/console/database/schema/displayContents] ERROR svlt.PageHandler handleRequest.639 - java.lang.ArrayIndexOutOfBoundsException: -128
java.lang.ArrayIndexOutOfBoundsException: -128
at oracle.sysman.emo.adm.DBObjectsMCWInfo.getSqlTimestampIndexes(DBObjectsMCWInfo.java:194)
at oracle.sysman.emo.adm.schema.TableViewDataBrowsingDataSource.executeQuery(TableViewDataBrowsingDataSource.java:167)
at oracle.sysman.emo.adm.DatabaseObjectsDataSource.populate(DatabaseObjectsDataSource.java:201)
at oracle.sysman.emo.adm.DatabaseObjectsDataSource.populate(DatabaseObjectsDataSource.java:151)
at oracle.sysman.emo.adm.schema.DisplayContentsObject.populate(DisplayContentsObject.java:369)
at oracle.sysman.db.adm.schm.DisplayContentsController.onDisplayAllRows(DisplayContentsController.java:303)
at oracle.sysman.db.adm.schm.DisplayContentsController.onDisplayContents(DisplayContentsController.java:290)
at oracle.sysman.db.adm.schm.DisplayContentsController.onEvent(DisplayContentsController.java:136)
at oracle.sysman.db.adm.DBController.handleEvent(DBController.java:3431)
at oracle.sysman.emSDK.svlt.PageHandler.handleRequest(PageHandler.java:577)
at oracle.sysman.db.adm.RootController.handleRequest(RootController.java:205)
at oracle.sysman.db.adm.DBControllerResolver.handleRequest(DBControllerResolver.java:121)
at oracle.sysman.emSDK.svlt.EMServlet.myDoGet(EMServlet.java:781)
at oracle.sysman.emSDK.svlt.EMServlet.doGet(EMServlet.java:337)
at oracle.sysman.eml.app.Console.doGet(Console.java:318)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:743)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
at oracle.sysman.eml.app.EMRepLoginFilter.doFilter(EMRepLoginFilter.java:109)
at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:15)
at oracle.sysman.db.adm.inst.HandleRepDownFilter.doFilter(HandleRepDownFilter.java:153)
at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:17)
at oracle.sysman.eml.app.BrowserVersionFilter.doFilter(BrowserVersionFilter.java:122)
at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:17)
at oracle.sysman.emSDK.svlt.EMRedirectFilter.doFilter(EMRedirectFilter.java:102)
at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:17)
at oracle.sysman.eml.app.ContextInitFilter.doFilter(ContextInitFilter.java:336)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:627)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:376)
at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:870)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:451)
at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:218)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:119)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:112)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:595)When we select the table via SQL, everything works fine.Hi,
I'm Galit from the QE team of VIN.
All the things that you've described are correct.
It is actually an edge case where the only VM, that the manual App can be managed from its Map view, was removed from the App.
The Manual App management is as designed, and may be changed in the future.
There are 2 ways to overcome this situation:
1.You can, as you stated, create another Manual App with similar name and remain with the "Zombie App".
2. To run a specific command that will remove the Zombie App from the DB.
Please note that option no. 2 involves using an API that we do not publish.
If you would like to use option no. 2 contact me in private and we will see about supplying the relevant commands to run in order to delete the "zombie" application.
Thanks,
Galit Gutman -
trying to download a movie on a laptop. tellls me i can't play it on that computer because my apple account has too many users. how do i see who is listed as a user so that i can delete one if it's not needed
please help
[email protected]The list you saw that shows what drivers are available from Apple Software Update is based on what drivers are supplied by the vendor to Apple. So it would appear that HP has not provided Apple with a scanner driver for 10.9 (known as an ICA driver), or provided an update if one was available for a previous version of OS X, so that you can scan from Image Capture.
I checked the HP web site for your model and they don't show any scanner driver or scanning software. If there was a scanner driver, you would be able to use Vuescan.
As for the Scan button not working, the following is documented by HP
Scanning to the computer from the printer control panel is not available when you scan with Preview, Image Capture, or Printer browser methods. You must use HP Scan software to scan from the printer.
But there does not appear to be any version of HP Scan software available for 10.9. So unless someone else has some workaround, it seems that you won't be able to scan with this model of HP. -
E Table of aggregate has too many partitions
Hi,
While checking performance info of the query I'm getting red light on one of the lines saying aggregate 100067 has too many partitions in E table.
Could you guys pls let me know what is this all about and how to reslove the same?
Thanks
RDoes your cube have compress after rollup on the aggregates...?
The aggregate is partitioned in the same way the E fact table is partitioned. You should choose the compress upon rollup option in the rollup tab of the infocube... Set the same and then if possible deactivate and do another rollup to the aggregate... -
Is it possible to have too many keyframes in one project in Premiere?
Hi all,
I'm using Premiere 6 on a Windows 7 ULT machine.
Is it possible to have too many keyframes in one project in Premiere?
I'm getting app crashes when I try to re-open a certain project in Premiere 6 and it seems that if that file has over 93 keyframes, then it will not re-open. But I can re-open that exact same project file with 93 keyframes in it, no problem.
But if I go any further and create any more keyframes than 93 in a new re-saved version of the exact same file, then that file will not re-open and I get an app crash... you can see screenshots of the two Windows app crash info panels below that I'm getting from three different bad Premiere project files that I've created so far.
I've tested and tested what is going on here and this seems to be what is causing the bad files. I've re-created the scenario and re-created files with over 93 keyframes from the same base project file that will still open... as soon as I get more than 93 keyframes in this file, then that newly saved file will not re-open after I close and try to re-open it.
This is 75 keyframes in one still image clip, 14 keyframes in another still image clip and 2 keyframes each in two other still image clips in a single project file... that is the limit... if I create any more keyframes in the clip that has 75 keyframes, the new file will save and render, but it won't re-open once it has been closed.
The two slightly different app crash info panels show, in the first one below,
"Fault Module Name: StackHash_e98d"
... and the second one shows,
"Fault Module Name: PREMINFO.dll"
... both messages with a little more different info in each one. I get either of the two error info panels when trying to re-open all three bad files that I've created with over 93 keyframes in them. That is, two of the files alternate between giveing "StackHash_e98d" and "PREMINFO.dll" when trying to open them and one of them always shows the "Fault Module Name: PREMINFO.dll" error.
So even the error messages are inconsistent with two of the bad files.
I've searched the internet for this error in association with Premiere and I've also searched on this forum and found nothing. Can anyone shed any light on this?
Thanks,
digiBill,
Even though I figured out a work around, I was still interested to know if these file opening crashes are related to Virtual Memory.
So on the topic of Virtual Memory... a few months ago I was troubleshooting a different problem in Premeire and I found this information...
"To improve performance in Premiere Pro, adjust the size of the paging file to a maximum of twice the amount of installed RAM."
Previous to that time three months ago or so, I had my Virtual Memory settings at the default automatic setting, but I tried setting my VM to twice the amount of installed RAM, and I've had it set that way ever since, just to make sure I'm optimizing the VM performance for Premiere and other apps.
But that isn't making any difference in this case. Today I also found information in a search that says to troubleshoot StackHash crashes, one should turn off "DEP" in the system settings for the application with the crash problem... according to the paragraph below, from the second post down by Chris on this tdistler.com page... http://tdistler.com/2009/04/10/stackhash-and-application-crashes-on-windows
Even though this was written in 2009 with Windows Vista in mind, many things for Vista work in Windows 7... it says,
"Here’s how 99 percent of Vista users can fix a StackHash failure. I’ll walk you through it step by step:
Method A:
1. Open your Start menu and click Control Panel
2. Browse to “System Maintenance” then “System”
3. In the left panel, select “Advanced System Settings” from the available links
4. You should now see the System Properties Window, which will have three sections. The top section is labeled “Performance” and has a “Settings” button. Click this button.
5. Select the “Data Execution Prevention” tab.
6. Select the option which reads “Turn on DEP for all programs and services except those I select”
7. Use the “Browse” button to locate the executable file for the application you were trying to start when you received the StackHash error, and click Open to add it to your exceptions list.
8. Click Apply or OK to commit your changes."
But I tried this and none of the three problem files that I encountered would open... I still got the StackHash_e98d or PREMINFO.dll crash errors.
So anyway, I'm a ways past that in my project now, just continuing with more keyframes over the number of 78 in separate but identical still image clips... that allows me to successfully work with this project with as many keyframes as I need.
Thanks again,
digi -
11g-[nQSError: 42029] Subquery contains too many values for the IN predicat
Hi,
I am having 2 reports one is for subquery which returns inputs to Main report. Actually the report was working fine in 10g. But in 11g we are gettting following error:
View Display Error
Odbc driver returned an error (SQLExecDirectW).
Error Details
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: [nQSError: 42029] Subquery contains too many values for the IN predicate.Please have your System Administrator look at the log for more details on this error. (HY000)
Please have your System Administrator look at the log for more details on this error.
Getting same error after modofying the parameter value MAX_EXPANDED_SUBQUERY_PREDICATES to 12000
Please suggest what could be the other reason it may fail or any other settings we need to check.
Regards,
ckengckeng,
Normally the IN clause has restriction of 10000 values in general sql/plsql we will go with inline queries i think model your rpd to generate inner queries
select * from emp where dept_id in (Select distinct dept_id from dept);
or have a condition/filter on sub report and make one more inner report with sub-filter but definitely it will cause performance issues.
thanks,
Saichand.v -
"Bad Data, too many results for shortname"
Every 10 minutes since October 13 the wikid error log has recorded the following error message:
*"Bad Data, too many results for shortname: username"*, always naming the same user, who is not actually doing anything.
Coinciding with that message at the same time every 10 minutes, the system log records 13 or 14 of the following:
*"Python\[15645\]: ••• -\[NSAutoreleasePool release]: This pool has already been released, do not drain it (double release)."*
15645 is a process owned by _teamserver, which would appear to confirm the connection between the python and wikid error messages.
Last clue: The messages (I have determined in hindsight) started while I was setting up the server to do vacation messages. The user named in the "Bad data" messages was the user who wanted to (and did) set up a vacation message at that time. They worked, too.
Anyone have any ideas about what is going on and how to fix it? BTW, google does not find even one page where this "Bad data" error message is mentioned.Thanks for your response. To answer your questions:
+Are you using AD for your directory?+ No. OD master only.
+Are there users with duplicate shortnames in your directory system?+ No, and to double check, I searched with WGM and only the one came up.
+As a bit of background, the wiki server keeps an private index of user and group information so we can track user preferences, and the "Bad Data, too many results for shortname: username" error is triggered when we do a lookup in that index for a particular user and we (unexpectedly) hit duplicate entries. Are you seeing an issue with using the software, or just an annoying log message?+ It's hard to say (for me) what might be related. The directory or wiki related issues with the server include:
• A memory issue with slapd that eventually causes it to crash. (preceded by lots of "bdbdbcache: db_open(+various: sn, displayname, givenname, mail, maybe others+) failed: Cannot allocate memory (12)" and "logging region out of memory" and "index_param failed" errors.
• The wiki is slow, despite very light use.
• Wake from sleep (network clients with authentication required) can be very slow. Several minutes even.
Any suggestions you may have would be appreciated. -
Multisim 2001 "too many parameters for subcircuit" error
When simulating circuits in Multisim 2001 with op amps from User library am getting Netlist Error message "Unable to correctly determine the nodes for the current circuit due to the following reasons:
Too many parameters for subcircuit type lf156_op_amps_1 (instance: xxu3)"
or a similar message for whatever op amp am using. Have tried creating components for several different op amps and always get same error message. Carefully checked the Pin Mapping Table and the symbol pins are correctly matched with order of pins in model. The only way have been able to get a simulation to run with op amp components in the User Library is if copy an op amp directly from Multisim library to User library and make no changes whatsoever. But if do something seemingly minor such as bring up the Symbol editor and add a text note underneath the symbol then get the "too many parameters for subcircuit" error.
Am also getting a Consistency Self Check error stating "Error: The circuit it empty. Simulation requires at least one ground." Do have ground in circuit; presumably this error is related to Netlist error above.
Operating system is Windows XP Professional.Well, this is an interesting situation in Multisim 2001. I tried doing this with another component and had the same results. I just renamed the part with no other changes and re-saved it to my database and sure enough I got this error. I have no idea what is causing this other than just a bug in the software. Us 2001 users will just have to live with this unless someone does happen to find a solution.
I don't seem to have any problems when creating new components and using or editing existing symbols with new model information. This does suck. What if just wanted to edit one paramenter instead of using a completely different model? I really hope someone can find a workaround or solution to this. I am glad you broughtm this to our attention.
Kittmaster's Component Database
http://ni.kittmaster.com
Have a Nice Day -
Too many lines for CO-PA assessment postings in KSB1
Hi Experts,
I created an assessment cycle in KEU1, with one segment, using an PA transfer structure (several cost elements to several value fields), and I´m using one single secondary cost element (category 42) to credit the cost centers.
When I execute the assessment via KEU5, the credits in the cost centers for the cost element category 42 generates too many lines (for example, I had 3 postings to 3 primary cost elements and in KSB1 I have 9 lines of "credits" - operation KSPA.):
Primary Cost Elements:
4110201004 ==> 3.000,00
4110209009 ==> 2.000,00
4110209013 ==> 1.000,00
Secondary cost element (after settlement through KEU5):
6519999999 ==> 134,36-
198,92-
190,49-
291,54-
548,27-
311,88-
2.659,89-
1.268,02-
396,63-
Do you know how can I summarize this postings to have only 3 (ore one) line for the secondary cost element? I cannot identify what was the criteria used by SAP to generate 9 lines.
Kind Regards
Mayumithe number of line item crediting the cost centre, shall be the same of the line item required in the COPA posting. So the more receiver you have in COPA , the more line item are created.
Paolo
Maybe you are looking for
-
My iPhone 5S is eating up my storage space.
It all started about a month ago (beginning of March), saying occasionally that my storage was almost full. I surely after the first few times tried to clear my messages and pictures, etc., but then the alerts kept becoming more and more frequent. it
-
Any pointers (apart from 'googling') would be appreciated. Thanks
-
What does Verizon offer in the way of wireless modem/routers?
My stepson currently has verizon DSL service and right now has a single port, Westell 6100 modem/router for a wired connection only. He's getting a new laptop and wants to continue to connect his desktop machine directly to the modem/router but want
-
Haven't updated in awhile... Moving my workstation box's OS from its sealed-in-aspic W2kPRO-SP4 to Win7 Ultimate 64bit on Oct22. Am finding a distinct dearth of compliance information aound, along with a complete and utter absense of any upgrade disc
-
I am using logic 8 on a Power mac G5/ OS X(10.4.11).Does somebody know whether I can upgrade it to Logic 9 without upgrading the operating system to Leopard?