Table in which the changes of SD-Documents have been stored - not CDPOS?!

Dear Friends,
I need to know in which table I can find  the document number from Sales/Order Documents in which the Incoterms have been changed. It must be something like CDPOS, but my helpdesk told me, they wouldn't find entries with Tabname = VBKD or Field = Inco1
But where can I find them?
Thank you very much for your help!
Best regards,
Volker

Hello to all,
we found the mistake we made. My helpdesk support made a query in table CDPOS regarding entries where the TABNAME=VBKG . But the right table is VBKD. So we try again and I hope I will get som entries.
Thank you and best regards,
Volker Petzsch

Similar Messages

  • How can I tell if my Documents have been stored in iCloud?

    How can I tell if my Documents have been stored in iCloud?

    It appears that those three options are still Beta and will have stored documents that I intentionally stored there.
    I was hoping to determine if my existing data was in the Cloud, much like my contacts, email etc was synched with my phone and now exists in the cloud.

  • HT1807 I travelled to a different country & using a new sim; with the change in sim, I have been unable to use iMessage & FaceTime. Cant replace replace the earlier no with the current one and it reads error. how to correct this?

    I traveled to a different country and using a new sim/new carrier. With the change in the sim, I have been unable to use the iMessage--outside of WiFi coverage area, and FaceTime at all time. I believe it is due to the phone number registered as an address in the phone, which has not changed with the change of sim; so it countinues to showing as an error while varifying the data.
    Wonder if any of you are in a position to advise as to how to address the following.
    1. I need to input correct phone no, meaning the number I am using in the correct location.
    2. I need to activate FaceTime and be able to use it.
    3. I need to be able to use iMessage and/or ordinary sms while outside of WiFi coverage area.
    It may be mentioned in my current location I don't have GPRS on the cell phone which is the case in my regular station.
    Thanks for your help.

    for #1
    Frequently asked questions about Apple ID - Apple Support
    I have multiple Apple IDs. Is there a way for me to merge them into a single Apple ID?
    Apple IDs cannot be merged. You should use your preferred Apple ID from now on, but you can still access your purchased items such as music, movies, or software using your other Apple IDs.
    If you are wondering how using multiple Apple IDs relate to iCloud, see Apple IDs and iCloud.
    for #2
    Apple does not accept unsolicited ideas see Apple - Legal - Unsolicited Idea Submission Policy

  • Table that contains the change date for every cost element

    Hi everyone!
    Can anyone please help me find a table which contains the change date for every cost element?
    Thanks,Jess

    If you basically want to find out if anyone changed the cost element, you need to use transaction KA05 and enter the cost element and controlling area.
    This would actually bring you whatever field was changed and on double clicking give you the actual change and the date on which the change was made.
    Problem is this change date is actually the creation date of a change document which is in the table CDHDR.Its not like the change date is on any master tables.
    Hope this helps
    Deepa

  • I want to share PDF documents with others. These documents have been edited (mostly highlights) by me. I want to share these documents without the changes I've made. How can I do this?

    I want to share PDF documents with others. These documents have been edited (mostly highlights) by me using Preview. I want to share these documents without the changes I've made. How can I do this? Do I have to manually erase all of the changes I've made. The people I want to share it with also have macs.
    Isaac

    You can move the iTunes folder to a separate drive on your pc an then configure each account to use this drive / folder as iTunes library ... The problem is, that iTunes by default stores everything in your personal music folder which is separate for each user account in windows (and by default is on "C" drive).
    I create a separate partition on every pc/laptop (and map a drive name) where I store music, videos and other mass data. This will also keep the "C" drive small, which is backed up from time to time and so my backup is also small.

  • I have a PDF with a diagram, I need to translate the text so I open it in Illustrator.  The document opnes up vertically oriented  I try to put it horizontal to be able to read and change the text  However everything I have done is not working  The artboa

    I have a PDF with a diagram, I need to translate the text so I open it in Illustrator.  The document opens up vertically oriented  I try to put it horizontal to be able to read and change the text  However everything I have done is not working  The artboard does change, but the diagram stays vertical.....Please help  I need to finish that for today..Please help

    A PDF usually consists of one to an indefinite number of clipping masks inside each other.
    You need to be very carefull with selecting stuff.
    So you need to read the manual on how to select stuff and on the basics of Illustrator.
    On top of that: because of the complex hierarchy of PDF files, it is kind of difficult to help you without seeing anything.

  • Need the the underlying table names which the Material Plan Detail Search p

    Our supply planning users would like to obtain the demand and supply plan for a bunch of given parts by running a query against some tables. The data they need via a PS Query output in Excel format is the same data that is provided by the Material Plan Detail page in PeopleSoft Supply Planning (Menu Path: Supply Planning >>>Solve Plan>>>> Material >>>>>>Material Plan Detail). The main underlying table behind this page is PS_PL_MRP_DTL.
    The problem is that this table contains data for only one Part Number (INV_ITEM_ID). The data is populated when Item ID is selected on the Material Plan Detail Search page.
    What are the underlying table names which the Material Plan Detail Search page brings together to present the information for the selected part number on the target page (The Material Plan Detail page)?
    If you could tell us the underlying table names (which the Material Plan Detail Search page brings together) we can write a query to present the data to the users for multiple part numbers at a time and not just one part number at a time.
    Any help would be greatly appreciated.
    We are on FSCM 8.9 Bundle 13
    Thanks in advance.

    The ERD's for FSCM 8.9 are available from following link
    PeopleSoft Enterprise Financial Management 8.9 Entity Relationship Diagrams [ID 979359.1]
    https://support.oracle.com/epmos/faces/DocContentDisplay?id=979359.1
    Hope it contains the info you are looking for.
    Hakan

  • How to find out which documents have been indexed?

    Hi,
    How can we find out which documents have been indexed by intermedia - I get a lot of errors when i look in ctx_user_index_errors - but how can I relate or find which error row means which row or document in the table on which the index is created??
    Thanks
    Dhwanil Shah

    You can enable the log to see what's going. That will tell you the exact number of documets that failed.

  • I have a psts on my mac and the time stamp hasnt changed since i added this to the mac even though they have been imported?

    i have a psts on my mac and the time stamp hasnt changed since i added this to the mac even though they have been imported?
    where is the data stored when i moves messages to the imported pst?
    after serval months of rebuidling and creating new identites for Outlook for mac2010 any reasons why this is constantly happening?

    I am not sure what you mean by this.
    is it ok to delete outlook ID's copy/backup as running out of space?
    If you mean you have several identities in the Office Identities folder then yes. You can delete whatever you don need\want except for your current.
    Are you updated to the latest version of Office?
    After the restore, navigate to ~/Documents/Microsoft User Data/Office 2011 Identities/your identity and delete the file called Database. Then rebuild.
    This may help:
    http://www.officeformachelp.com/outlook/troubleshoot/

  • My word perfect documents have been changed to .doc but I can't open them in pages. ugh!

    my word perfect documents have been changed to .doc but I can't open them in pages. ugh!
    they are wpd files from around 2001-2003 that my Dad emailed me and on a PC was easy to simply relabel as .doc but despite this I cannot open in pages or convert to pages.
    Please can you help me?
    cheers!
    DT

    In fairness to Pages, only apps that can handle Word Perfect docs of that vintage can open them, either.  W
    As Viking said, changing the extension does nothing to the file structure & metadata of the document.  At one time Mac people didn't bother with the extensions, because they were simply a visible indicator of the app that made them, and the Mac would get that information from the file itself.
    Since you changed the extensions, some Windows apps may still use those extensions to tell them the file source. When they try to open a .wpd file as if it were a .doc file, they will get very confused.
    You can try to open the files by using the Menu> Open command, with the setting of "all files."  IF and only if the app can handle .wpd files, then maybe it will open it & ignore the extension.

  • Workflow fails when page is created through the CreatePublishingPageDialog.aspx. The settings for this list have been recently changed.

    Hi,
    I've created a content type and attached a workflow to it so when I create a publishing page the workflow should run.
    My Page creation is based on the "_layouts/15/CreatePublishingPageDialog.aspx" page in order to be allowed to fill in the required fields on item creation (so I don't have to go to the page afterwards and choose "edit properties").
    On my page library I have "Require content approval for submitted items" and "Require documents to be checked out before they can be edited?" set to YES.
    This design has worked fine before I added my workflow. However now when I click save or check in/publish I get the below error. My guess is that the workflow starts (and blocks) right after I fill in the filename and click next in the "CreatePublishingPageDialog.aspx"
    step to go to the required fields.
    If I go back to my page after I receive the error below I can edit the required properties again and then publish the page correctly.
    How do I avoid this? thank you
    My pages are created through
    Checking the ULS log I get this error:
    Getting Error Message for Exception System.Web.HttpUnhandledException (0x80004005): Exception of type 'System.Web.HttpUnhandledException' was thrown. ---> Microsoft.SharePoint.SPException: The settings for this list have been recently changed. Refresh
    your browser before editing this list.   
    at Microsoft.SharePoint.WebControls.BaseFieldControl.OnLoad(EventArgs e)   
    at System.Web.UI.Control.LoadRecursive()   
    at System.Web.UI.Control.LoadRecursive()   
    at System.Web.UI.Control.LoadRecursive()   
    at System.Web.UI.Control.LoadRecursive()   
    at System.Web.UI.Control.LoadRecursive()   
    at System.Web.UI.Control.LoadRecursive()   
    at System.Web.UI.Control.LoadRecursive()   
    at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)   
    at System.Web.UI.Page.HandleError(Exception e)   
    at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)   
    at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)   
    at System.Web.UI.Page.ProcessRequest()   
    at System.Web.UI.Page.ProcessRequest(HttpContext context)   
    at Microsoft.SharePoint.Publishing.TemplateRedirectionPage.ProcessRequest(HttpContext context)   
    at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()   
    at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)

    Hi Jan,
    Thanks for posting this issue, Kindly try out with the hot fixes provided in the below mentioned URLS
    https://support.microsoft.com/kb/2536591?wa=wsignin1.0
    http://elblanco.codeplex.com/releases/view/6856
    I hope this is helpful to you, mark it as Helpful.
    If this works, Please mark it as Answered.
    Regards,
    Dharmendra Singh (MCPD-EA | MCTS)
    Blog : http://sharepoint-community.net/profile/DharmendraSingh

  • When I sync my iPod Classic, the changes I made (Ratings, Last Listened) do not show up on my computer.

    When I sync my iPod Classic, the changes I made (Ratings, Last Listened) do not show up on my computer.

    Try another Sync. On occasions, I've know a first Sync to behave like this.

  • In f110, the DMEs for different payment documents have been combined

    Hi,
    In f110, the DMEs for different payment documents have been combined.
    Two DMEs are created but they are not in separate lines.
    Kindly help.
    Thanks

    Contd ....
    Example 2 -  the following is an example of multiple payment documents against each invoice
    FH 13062008T1.001 13/06/2008 14:22:27 #
    H 10000002 13/06/2008 HSP04 NEFT-S 002-434132-908 INR INR ABNBK A.B.ENTERPRISE 999999
    L 10000002 13/06/2008 HSP04 NEFT-S 1900007628 NM             4000.00           4000.00
    H 20000003 13/06/2008 HSP04 TRFR-S 002-434132-908 INR INR ABNBK A.B.ENTERPRISE 999999
    L 20000003 13/06/2008 HSP04 TRFR-S 1900007629 NM             5000.00           5000.00
    H 30000003 13/06/2008 HSP04 RTGS-S 002-434132-908 INR INR ABNBK A.B.ENTERPRISE 999999
    L 30000003 13/06/2008 HSP04 RTGS-S 1900007630 NM             6000.00           6000.00
    Z ZOF #                                                                               
    Example 3 - This is one payment document against multiple invoices
    FH 14032008.001 14/03/2008 10:11:49 #
    H 700013 14/03/2008 HSP01 TRFR 072020779001 INR INR HSP01 Srinivas 464646 154   Ba
    L 700013 14/03/2008 HSP01 TRFR 0100000836 NM           200000.00         200000.00
    L 700013 14/03/2008 HSP01 TRFR 0100082351 NM              100.00            100.00
    L 700013 14/03/2008 HSP01 TRFR 1900106433 NM            10000.00          10000.00
    L 700013 14/03/2008 HSP01 TRFR 1900106552 NM            25000.00          25000.00
    L 700013 14/03/2008 HSP01 TRFR 1900106613 NM           120000.00         120000.00
    L 700013 14/03/2008 HSP01 TRFR 1900106617 NM           120000.00         120000.00
    L 700013 14/03/2008 HSP01 TRFR 1900106620 NM           120000.00         120000.00
    L 700013 14/03/2008 HSP01 TRFR 1900106621 NM           120000.00         120000.00
    L 700013 14/03/2008 HSP01 TRFR 1900106622 NM            12000.00          12000.00
    L 700013 14/03/2008 HSP01 TRFR 1900106677 NM            50000.00          50000.00
    L 700013 14/03/2008 HSP01 TRFR 1900106701 NM             1000.00           1000.00
    Z ZOF #                                                                               
    Hope this helps.
    Thanks and Regards,
    Anit
    Edited by: Anit Mangat on Aug 6, 2009 11:41 AM

  • The user account in which the Oracle VSS Writer Service is running does not have the DBA privileges to log in to the Oracle instance.

    VSS-00011: Connection to database instance <instance_name> failed.  
    Cause : The user account in which the Oracle VSS Writer Service is running  does not have the DBA privileges to log in to the Oracle instance.  
    Action : Run the Oracle VSS Writer Service in a user account that can connect to the Oracle instance with DBA privileges.  
    I have assigned ora_dba group to the user that runs the Oracle VSS Writer Service which is the only Oracle solution but still getting
    the above error. Was advised to raise the issue here that it is an OS issue. Pls help

    The user account cannot access Oracle Database instance. And also how do you temporarily disable security software on the server.
    Have you checked what I already asked for? "Try using the user account and access the Database Instance.
    That will let you see if the problem is with the user account permissions or not."
    If this does not help then you can contact Oracle as suggested by Dave.
    This posting is provided AS IS with no warranties or guarantees , and confers no rights.
    Ahmed MALEK
    My Website Link
    My Linkedin Profile
    My MVP Profile

  • I have changed my e-mail address on the apple ID website and have been able to change it for ICloud.  My e-mail address (ID) has not changed for I-tunes and therefore, I can't install updates. ??

    I have changed my e-mail address on the apple ID website and have been able to change it for ICloud.  My e-mail address (ID) has not changed for I-tunes and therefore, I can't install updates. ??

    If this is on your computer's iTunes then log out via the Store > Sign Out menu option and then log back in with the updated version of your account. If on an iOS device then tap on your id in Settings > iTunes & App Store and log out and then log back in.

Maybe you are looking for