Table is not generated while downloading customizing condition

Hi,
I’ve ended the pricing configuration on Dev environment and now I’m trying to configure it in CRM Production environment.
I’ve created a new object to substitute CND_CUST_CNDALL and I called it ZDNL_CUST_CNDAL.
After create it in Production environment, just like the same object in Dev environment, I realized that even using the exactly same filters, in both objects, in Production environment one access sequence is not created in CRM after the initial download (using trx. R3AS).
In the log(trx. SLG1) I don’t have errors, only 4 warnings of  “Double entry for table /SAPCND/T681E. For details, see long text.”, which don’t seems to be a problem.
I’ve tried to download only the access sequence that was missing and it didn’t work too, so I analyzed deeply this access sequence and a realized that all tables of the sequence were activated except table CUS818.
In SAP notes 398078 and 314542 I’ve found a reference of report “/SAPCND/RV12N001” which I’ve run for application “CRM”, Usage “PR” with check on option “Condition tables and supplementary tables”. In the log of this report I could see that all tables except CUS818 were generated and no errors were issued.
I’m sure that I’ve done the same configuration in both environments so I believe that this table should be generated.
This is very important because we need to start ordering from Internet on production environment and the pricing is not working.
What could be the problem of this situation?
Thanks in advance,
Liberto Rodrigues

Hello Liberto,
please have a look at the following note:
514952 Download of customer-specific tables
It describes all the steps you have to carry out in order to download your own tables. Most problems downloading customer tables are due to the steps from that note are not correctly fulfilled.
Please, reward points if it helps you
Regards, José Ignacio

Similar Messages

  • Error while downloading custom condition objects(A989)

    Hi Friends,
    when we try to download custom condition objects(A989), we are getting the below error.
    Error Message:  At least one field name for the condition table is initial
    The condition table for application CRM, usage PR and table number CUS989 contains at least one field with a name that is initial.
    we have implemented note Note 514952 - Download of customer-specific tables, but the same issue persists.
    we have also generated the report /SAPCND/RV12N001, still we are facing the same issue .
    Please suggest..
    Best Regards,
    Anil.

    Hi,
    please try first a new initial load of pricing customizing from R/3 to CRM with transaction R3AS:
    Download object: DNL_CUST_PRICE
    Kind regards
    Manfred

  • The status bar not going while download the app.

    The status bar not going while download the app.
    I'm bought the bento from App Store, I finished the payment, but the status bar appeared but doesn't show any progress. Strange!!

    I dont want to Display the popup, I want to Display in Status Bar as a Error Message.
    Like this .
    If I put  message type 'E' its Displaying popup message , MESSAGE ' Duplicate Condition Types Are Not Possible.' TYPE 'E'.
    If I Put messge type 'I' its Displaying in Status Bar .
    Regards,
    Prathap
    Edited by: giri prathap on Sep 13, 2011 12:35 PM

  • Printer spooler is not generated while output command

    Dear All,
    I am facing problem in  where the printer is installed in that system .when the user is giving print the
    Printer spooler is not generated while output command successfully  coming in sap
    Please suggest how to sol
    Regard
    Kumar

    Hello,
    Not very strong with Linux, but i think that, maybe you need to set a graphic emulator to compile ?
    Francois

  • Mapping error while downloading the condition records (ECC to CRM)

    Hello Experts,
    We were downloading the condition records from ECC to CRM system (Production), but due to Mapping error, it was unsuccessful, i wonder what's going wrong there.
    When i see in SMQ2 (CRM Inbound Queue), an queue got stucked there, i.e, R3AD_ZDNL_COND_A930 having SYSFAIL status.
    While debugging the queue, I have found that the queue got stuck because of u2018Mapping Erroru2019.
    I found inside, Standard code reads the record from table /SAPCND/T681 (Condition Table Structure) for KAPPL = 'CRM', KVEWE = 'PR', KOTABNR = 'CUS930' and AS4LOCAL = u2018Au2019 for which the value of VAKEY_OFFSET is maintained as 0.
    If system finds the value of VAKEY_OFFSET is Zero(0) then it will change the download type from D (Delta) to M (Mapping Error) and raise the error & block the Inbound Queue in CRM.
    I checked in SMW01alsofor getting some more knowledge about that queue, here the error description:
    Structure information for table CNCCRMPRCUS930 not available (Message class: CND_MAP)
    Error when carrying out delta download (Message class: CND_MAP)
    I am a technical guy and dont have much idea in CRM Middleware.
    I welcome your valuable thoughts and will award full points.
    Regards,
    Jeo

    Hi,
    As you mentioned i checked for the followings:
    >>In Maintain field catalog:
    I found only 2-3 fields are maintained here, when i compared with A930 (A930 in ECC system).
    >>Create condition tables:
    I checked it for CUS930, i found the same but condition table structure name like CNCCRMPRCUS930 are missing. Is that important? Because i see in SMW01, same error is coming over there : Structure information for table CNCCRMPRCUS930 not available .
    Please suggest me, now what i need to do?
    Regards,
    Jeo
    Edited by: Jeo Denson on Dec 1, 2011 4:11 PM

  • SPOOL not generated while smartform is executed in Background

    Hi
    I have issue while creating spool for smartform in background.Its works fine in foreground and i m able to view the outpt.
    But in background it should generate a spool but it is not generating?
    I have given the ouput options to supress the dialog but it still it is not generating the spool.
         control-preview = 'X'.
          control-no_dialog = 'X'.
          control-device = 'PRINTER'.
          control-no_dialog = 'X'.
          control-GETOTF = 'X'.
          OUTPUT_OPTIONS-TDDEST = 'LP01'.
          OUTPUT_OPTIONS-TDNOPRINT = 'X'.
    Any suggestions??
    Thanks & Regards
    Jyo

    Hi Jyotheswar,
    When the smartform is generated in background create a new spool by using following code
          output_options-no_dialog = 'X'.
          output_options-tdarmod = 1.
          output_options-tdcopies = 001.
          output_options-tddest = 'LP01'.
          output_options-tdprinter = 'SWIN'.
          output_options-tdlifetime = 1.
          output_options-tdnewid = 'X'.
    tdnewid is the field used to create a new spool request.  You can get the new spool request number in job_output_info-spoolids.
    Regards,
    Birendra

  • Bdoc Error: PRODUCT_SRV while download Customizing Objects from ECC to CRM

    Hello,
    we have tried to download Customizing Objects from ERP to CRM we getting Bdoc error PRODUCT_SRV
    Please any help us in replicating customizing objects ECC6.0 to CRM7.0 Ehp1.
    Bdoc Type:PRODUCT_SRV
    Thanks,
    adi

    Adi,
    Where do you get the erorr? If you're downloding PRODUCT_SRV, then this is not a customizing object. Please check for related inbound and outbound queues in CRM and ECC for errors. Please also check SMW01 and see if you have any BDoc's in error. Give us the full error text of any errors found.
    If you get the problem with customzing objects, please let us the object name(s). Is it just one object or all customizing object?
    Best regards,
    Brian.

  • Proxy Table type not Generated

    Hi Gui's,
    I am woking on proxies while creating the proxis in SPROXY transaction proxy table type is not creating which we used in abap programing. what is the issue will you please guide me.
    Thanks,
    Lakshmi

    Dear Laxmi
    For tAble creation in Sproxy  you need to provide hirerchy in your SAP PI data type  like this
    DT_TYPE
            row            occurence 0: unbunded
                     dataFields
    generally if we omit this row line then table does not gets created
    so if you have not given hierarchy as per this please create a node row and provide hierrachy and assign occurence 0: unbounded
    If you want you may give different name to this node row
    Thanks
    sandeep

  • Internal number not showing while creating customer master record

    Dear All.
    After creation of account group and doing patner determination procedure, while creating customer master record it is showing all the 4 functions of partner in partner function tab page but the internal number is  not displaying. I have set number range internally.
    Thanks..
    CG Balaji

    > Dear All.
    >
    > After creation of account group and doing patner
    > determination procedure, while creating customer
    > master record it is showing all the 4 functions of
    > partner in partner function tab page but the internal
    > number is  not displaying. I have set number range
    > internally.
    >
    > Thanks..
    >
    > CG Balaji
    Hi,
    In your partner determination procedure for Customer master, apart from assigning a Pratner proc to your A/c grp, you also need to maintain the combination of your a/c group with the partner functions that you have in your procedure.
    On the left side panel, you have a link (i think 5th) saying Account group - Function assignment. In this, maintian the partner functions that you want to your a/c grp.
    This will allow taking INTERNAL numbers during customer creation.
    Thanks and reward points if useful

  • Calday not generated while generating universe on mdx query

    Dear All,
      Issue:   Iam  Creating  a universe on  Bex Query , issue is  calday which is in free characteristics in not  generated in  
                  universe.Please suggest   .
    Thanks
    suresh.p

    Which version of BO and SAP BW do you use?
    Regards,
    Stratos

  • Image does not display while download with Java 1.6

    Hi,
    I have specified the following line in our jnlp file:
    <icon width="64" height="64" href="filename.jpg"/>
    Under Java 1.5, the image displays while the jar files are being downloaded, but under Java 1.6 they do not. Can anyone tell me why?
    Thanks.
    -Pete Spiro

    Is this a custom application that is viewing the report or is it Infoview or urlreporting?
    If it isn't a custom app, you may be better off posting this question [here|SAP BusinessObjects Web Intelligence; instead.  You may also want to open a case with support for this.

  • Getting error while downloading customer

    hi all,
    i am getting following error in smq2.
    while tranfering custmers.
    Function module "/PMPAY/P_CHK_MC" not found.
    plz check

    Hi Vishesh,
                   All i can is the FM that you have metioned, i believe it to be custom one(Specific to your project). So, there is not much inputs that anyone can provide here. Ask your technical folks to look after.
    Hope it helps!!
    Regards,
    Josh

  • Charts and pivot tables are not generated in Seed Cache using iBots

    Hi,
    I have been working on OBIEE cache. I encountered few issues.
    1. We scheduled ibots to run daily and deliver dashboards to seeding cache. But the cache is not getting created for some reports which have charts and pivot tables in the dashboards .
    We are using OBIEE 10.1.3.3.1.
    2. When an end user logs in and access dashboard, the query is hitting the database.
    3. The sql query for reports which got created in server cache are not the same as sql query generated when an end user logs in to access dashboard. The difference being query generated when an end user is accessing dashboard is using aggregates.
    4. Please let me know if anyone has faced same issue and any solutions.
    Any help is appreciated
    Thanks,
    Swetha

    Hi,
    I have been working on OBIEE cache. I encountered few issues.
    1. We scheduled ibots to run daily and deliver dashboards to seeding cache. But the cache is not getting created for some reports which have charts and pivot tables in the dashboards .
    We are using OBIEE 10.1.3.3.1.
    2. When an end user logs in and access dashboard, the query is hitting the database.
    3. The sql query for reports which got created in server cache are not the same as sql query generated when an end user logs in to access dashboard. The difference being query generated when an end user is accessing dashboard is using aggregates.
    4. Please let me know if anyone has faced same issue and any solutions.
    Any help is appreciated
    Thanks,
    Swetha

  • A7000 not charging while in ON condition

    hi, i owned a7000. My phone not getting charged while it is on, yet its charging while its completely off. tried on some chargers or outlet, no charging. Is there a problem on my battery pack or in its software? Please reply if anybody is having a solution to the above problem.

    Thanks for your quick reply. The red light glows for a few seconds in Power ON condition and then stops glowing and phone stops charging. The red light glows fine continously in Power OFF mode.Here are the details from Device information:Baseband versionA7000.ROW.V15, 2015/07/21 20:44 Build NumberA7000-a_S144_150721_ROW Is one of the two above firmware version? Warm Regards,Manoj

  • SLD - Export Business System: 404 Not found while downloading ZIP-File

    Hi, well we did a complete export of SLD to another XI-System. This worked fine so far except that one business System was not properly "installed" in SLD.
    Therefore we want to export this single business system via option "Export" but we receive an 404 Error: The requested resource does not exist. when trying to download the given zip-file!
    I read in OSS that this error occurs in XI-systems with SP <12 and SAP suggest to upgrade to 12
    Well that's not an appropriate solution!
    Does somebody can help how we can download this zip-file with the business system in it?!
    Or is there some workaround i am not familiar with?!
    Thx in advance!

    Ok Prateek,
    we had two same Technical Systems with two differnet hosts given in the SLD of DEV & PROD System.
    After decision to devide both systems, means to seperate SLDs we copied the whole SLD from DEV to PROD. So there were some conflict with this two technical systems because during import of CIM-Data the business systems got switched up.
    Therefore we thought we have to export the business system given in DEV SLD to import this business system in PROD SLD. But the workaround is that we simply assign the wrong imported business system to the right technical system (in PROD SLD)
    That's it! br

Maybe you are looking for