Table Join in ABAP Query

Hi,
I'm new to ABAP Query. I want to include a table and join with an existing table in abap query. how to do this?

Hi
select lipsvbeln lipslfimg likp~wadat
        into corresponding fields of table ltab_orders
        from lips join likp on ( lipsvbeln = likpvbeln )
        join vbfa on ( lipsvbeln = vbfavbelv )       
        where lips~matnr = matnr
        and   lips~vbeln in vbeln
        and   likp~vbeln in vbeln         
        and   vbfa~vbelv in vbeln
        and   lips~werks in werks
        and   likp~wadat in datum
        and   vbfa~vbtyp_n = 'Q'            
        and   vbfa~vbtyp_v = 'J'. 
Thanks,
Neelima.

Similar Messages

  • Need to delete a table join in ABAP query

    Hi
      I have created an ABAP query with a join over AUFK, AFIH, AFKO, AFVV, AFVC and AFRU.
      I need to delete the table AFRU from the join. I tried to delete the table in the edit option in the Join table option. I deleted the links between the table AFVC and AFRU and clicked on delete table option. I get the message Table AFRU not used. Please let me know if there is any method to delete the table.
    Thanks and Regards,
    Ajith

    u have to break the link between this table and other tables...U need to delete where conditions and then delete the join...

  • Self join using ABAP Query

    Hello all,
    How to create a self join using ABAP Query?
    Say, I have this table EKBE with belnr (materials doc num) and lfbnr (reference material doc num). I have to pick the PO's from EKBE whose belnr doesnt have any lfbnr.
    Regards
    Madhumathi A

    hi madhu,
    tables : ekbe.
    data itab like standard table of ekbe with header line.
    select * from ekbe into table itab where belnr >< 0 and lfbnr = ' '.
    loop at itab.
    write :/ itab-belnr,itab-lfbnr.
    endloop.
    check this code this works to select the orders whose belnr doesnt have any lfbnr
    reward points if useful.

  • Pooled table supported by ABAP Query .................

    Hi,
    I have an requirment to create a abap query report .For that one i have to use a pooled table as join with another table?
    Is that possible or not?
    Reagrd
    Ricky

    Hi,
    You can use the tables in ABAP query but not in the direct join format.
    For e.g.
    Select "data" from BSEG into correspoding fields of table itab.
    select "data" from <tablename>
    into correspoding fields of table itab1
    for all entries of itab
    where <conditions>.
    Thanks & Regards

  • DEFAULT a value for a filed from a table used in ABAP query

    I have used a field makt-spras in my infoset query and used it in my selection screen. Whenever I go into the transaction for the query and see the selection screen it always has 'EN' in the language key. Is there a way I can clear that . I dont want the selection screen to have anything wyhen I enter the transaction so that teh user can enter his or her own language and instead remove the work of removing the EN always . I would like to default it to blank space initially . In the query where can I do that as I dont see nay option to default it to space in the query for this field that is directly used form the table .
    Thanks

    Hi There,
    In the transaction SQ02 (for Infoset), click on the button Extras on the top and then in the Tabstrip that appears, you will have Code, click on that. After that from the drop down selection box, select Initialization even and write the code CLEAR makt-spras field.
    This should work.
    S.Dakshna Nagaratnam.
    Edited by: Dakshna Nagaratnam on May 22, 2009 7:25 PM

  • Table deletion in ABAP Query Report

    Hi ,
         Is it possible to delete a Table from a infoset after generating it ?? i.e
    i have used five vendor tables and generated a infoset. now i feel that i can get the expected report with 4 tables itself , so fi i wanna delete the 5th table what should i do ??
    I tired by just deleting the Link between the 5th table with the other tables and generate it again.. but it throws an error
    Thanks in advance !!

    Hi
    select lipsvbeln lipslfimg likp~wadat
            into corresponding fields of table ltab_orders
            from lips join likp on ( lipsvbeln = likpvbeln )
            join vbfa on ( lipsvbeln = vbfavbelv )       
            where lips~matnr = matnr
            and   lips~vbeln in vbeln
            and   likp~vbeln in vbeln         
            and   vbfa~vbelv in vbeln
            and   lips~werks in werks
            and   likp~wadat in datum
            and   vbfa~vbtyp_n = 'Q'            
            and   vbfa~vbtyp_v = 'J'. 
    Thanks,
    Neelima.

  • ABAP Query  - Duplicates in joins

    Hi All,
    In using joins in ABAP query, I am getting duplicate records in the output. Is there any way to restrict that?
    Please help me with this.
    Thanks in Advance,
    Sushmitha

    Depending on the tables you are using, you may have time-slicing of data where you need to specify the time slice you want to use. 
    In SAP Utilities, when selecting data from tables with time-slicing, we check for a BIS (end) date of 12/31/9999 to denote the most current entry.  Check the tables you are joining and see if any of them indicate they have time-sliced data.  If they do, include a check for the end date in your WHERE conditions.
    K---

  • Abap query, join between same tables

    Hi,
    I have an Abap Query (SQ01), I need to create a join between the same table (ESLL-ESLL) to obtain the services from a PO. The join is with the packno from ESLL to subpackno from ESLL (the same table). But I don't know how I can do that with Abap Query. Because the Infoset doesn't allow inserting the table two times.
    Somebody can help me.
    Thanks.
    Victoria

    Hi:
    I was able to create a query to retrieve the service lines entries using tables ESSR (Header) (service entry sheet number as input parameter), linked to package number to view ML_ESLL and then from the view the sup-package number linked to ESLL. That way I was able to retrieve all the service lines information from table ESLL only using SQ02 and SQ01, no ABAP.
    I Hope this help.
    Juan
    PS: I know the post is old but may be there are people out there with no ABAP access who needs to create reports for Service Entry Sheets lines. All the join conditions are.
    Table             Table
    ESSR            EKKO
    ESSR            ML_ESLL
    ML_ESLL      ESLL
    ESLL             ESLH
    Edited by: Juan Marino on Jan 23, 2012 10:53 PM

  • Can we join two totals tables in ABAP Query

    Hey Gurus!
    Can we join two totals tables in ABAP query.
    I am tyring to join FAGFLEXT with internal orders totals table.
    Thanks
    S

    Hi,
    Report painter majorily operates around characteristics and key figures.
    ABAP query comes even more handy.  The advantage is -
    1. You can link many tables
    2. Create selection screen as you like to have
    3. User friendly report creation
    4.  Logic can also be coded.
    5. Authorization can be set
    I have written a article in SDN, which gives you an idea as to how to go about using ABAP query.  Have a look on this - [Article - Practical Usage of ABAP Query|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/20f6b256-23be-2b10-8b93-cad83a617634]
    Regards,
    Sridevi

  • How to add join conditions in ABAP Query.

    Hi,
    I need a help on "ABAP Query".
    How to add join conditions in ABAP Query.
    Thanks in advance.
    Thanks & Regards,
    Ramana

    Hi,
    See below code,
    *& Report  ZRNP_ALV_SO
    REPORT  zrnp_alv_so MESSAGE-ID z7rnp .
    INCLUDE zrnp_include .
    *SELECTION SCREEN                                                      *
    SELECTION-SCREEN BEGIN OF BLOCK blk1 WITH FRAME TITLE text-004 .
    SELECT-OPTIONS: s_vbeln FOR vbak-vbeln ,
                    s_auart FOR v_auart ,
                    s_vkorg FOR v_vkorg ,
                    s_spart FOR v_spart ,
                    s_kunnr FOR v_kunnr ,
                    s_matnr FOR v_matnr .
    SELECTION-SCREEN END OF BLOCK blk1 .
    *AT SELECTION SCREEN                                                   *
    AT SELECTION-SCREEN.
      SELECT SINGLE vbeln
                     FROM vbak INTO vbak-vbeln
                     WHERE vbeln IN s_vbeln.
      IF sy-subrc <> 0.
        MESSAGE e202.
      ENDIF.
    *START OF SELECTION                                                    *
    START-OF-SELECTION .
      PERFORM data_select.
      PERFORM t_sort USING i_sort .
      PERFORM event_cat USING i_event .
      PERFORM fld_cat USING i_fldcat[] .
      PERFORM t_layout USING i_layout .
      PERFORM fld_cat2 USING i_fldcat2[] .
      PERFORM call_alv.
    * DATA SELECT                                                          *
    *&      Form  DATA_SELECT
    *       text
    *  -->  p1        text
    *  <--  p2        text
    FORM data_select .
      REFRESH: it_vbfa, it_so1, it_del_ful ,it_del1 .
      BREAK-POINT.
      *SELECT*
            *a~vbeln*
            *a~auart*
            *a~vkorg*
            *a~spart*
            *a~kunnr*
            *b~posnr*
            *b~matnr*
            *c~maktx*
            *b~kwmeng*
            *b~vrkme*
            *INTO TABLE it_so1 FROM vbak AS a*
                  *INNER JOIN vbap AS b ON b~vbeln = a~vbeln*
                  *INNER JOIN makt AS c ON c~matnr = b~matnr*
                  *AND c~spras = sy-langu*
                  *WHERE a~vbeln IN s_vbeln .*
      IF sy-subrc = 0.
        SORT it_so1 BY vbeln.
        DELETE ADJACENT DUPLICATES FROM it_so1.
      ENDIF.
    * COLURING DISPLAY                                                     *
      DATA: ld_color(1) TYPE  c .
    *  LOOP AT it_so1 INTO wa_so.
    * Populate color variable with colour properties
    * Char 1 = C (This is a color property)
    * Char 2 = 3 (Color codes: 1 - 7)
    * Char 3 = Intensified on/off ( 1 or 0 )
    * Char 4 = Inverse display on/off ( 1 or 0 )
    *           i.e. wa_ekko-line_color = 'C410'
    *    ld_color = ld_color + 1.
    * Only 7 colours so need to reset color value
    *    IF ld_color = 8.
    *      ld_color = 1.
    *    ENDIF.
    *    CONCATENATE 'C' ld_color '10' INTO wa_so-line_color.
    **  wa_ekko-line_color = 'C410'.
    *    MODIFY it_so1 FROM wa_so.
    *  ENDLOOP .
    *  IF sy-subrc = 0.
      IF NOT it_so1[] IS INITIAL.
        SELECT vbelv
               posnv
               vbeln
               posnn
               vbtyp_n
               INTO TABLE it_vbfa
               FROM vbfa
               FOR ALL ENTRIES IN it_so1
               WHERE vbelv = it_so1-vbeln
               AND   posnn = it_so1-posnr
               AND vbtyp_n ='J' .
        IF sy-subrc = 0.
          SELECT vbeln
                 posnr
                 matnr
                 werks
                 lgort
                 charg
                 lfimg
                 vrkme
                 FROM lips INTO TABLE it_del_ful
                 FOR ALL ENTRIES IN it_vbfa
                 WHERE vbeln = it_vbfa-vbeln
                 AND   posnr = it_vbfa-posnn.
        ENDIF.
      ENDIF.
    ENDFORM.                    " DATA_SELECT
    **************** EVENT CATALOG ****************************************
    *&      Form  EVENT_CAT
    *       text
    *      -->P_I_EVENT  text
    FORM event_cat  USING    p_i_event TYPE slis_t_event .
      REFRESH p_i_event .
      CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
    * EXPORTING
    *   I_LIST_TYPE           = 0
       IMPORTING
          et_events             = p_i_event
    * EXCEPTIONS
    *   LIST_TYPE_WRONG       = 1
    *   OTHERS                = 2
    *  IF sy-subrc <> 0.
    ** MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    **         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    *  ENDIF.
      READ TABLE p_i_event WITH KEY name = slis_ev_top_of_page INTO t_event.
      IF sy-subrc = 0.
        MOVE 'TOP_OF_PAGE' TO t_event-form.
        MODIFY p_i_event FROM t_event INDEX sy-tabix TRANSPORTING form.
      ENDIF.
      CLEAR t_event .
    ENDFORM.                    " EVENT_CAT
    **********FORM FOR EVENT TOP_OF_PAGE**********************************
    FORM top_of_page .
      REFRESH i_listheader.
      DATA: t_header TYPE slis_listheader.
      DATA: v_text(50).
      WRITE sy-datum TO v_text.
      CLEAR t_header.
      t_header-typ = 'S'.
      t_header-key = "Date".
      t_header-info = v_text.
      APPEND t_header TO i_listheader.
      CLEAR t_header.
      CLEAR v_text.
      WRITE:  'SALES ORDER & DELIVERY DETAILS REPORT  ' TO v_text .
      t_header-typ = 'S'.
      t_header-key = 'TITLE'.
      t_header-info = v_text.
      APPEND t_header TO i_listheader.
      CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
        EXPORTING
          it_list_commentary = i_listheader.
    *      I_LOGO             = 'ALV_BACKGROUND'.
    *   I_END_OF_LIST_GRID       =
    ENDFORM.                    "TOP_OF_PAGE
    ********  FIRST ALV GRID DISPLAY ***************************************
    FORM call_alv .
    * FORM TO MAKE THE CELL CONTENTS INVISIBLE.
    * PERFORM INVISIBLE_CELL_CONTENTS. *
    *EXCLUDE-DECLARATION.
      CLEAR wa_exclude.
      wa_exclude-fcode = '&VEXCEL'.
      APPEND wa_exclude TO i_exclude.
    *&      Form  CALL_ALV
    *       text
    *  -->  p1        text
    *  <--  p2        text
      CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
       EXPORTING
         i_callback_program                = sy-repid
    *    I_CALLBACK_PF_STATUS_SET          = 'SET_PF_STATUS'
         i_callback_user_command           = 'USER_COMMAND1'
         i_callback_top_of_page            = 'TOP_OF_PAGE'
         i_background_id                   = 'ALV_BACKGROUND'
         is_layout                         = i_layout
         it_fieldcat                       = i_fldcat[]
         it_excluding                      = i_exclude
         it_sort                           = i_sort
         it_events                         = i_event
        TABLES
         t_outtab                          = it_so1
    *  IF sy-subrc <> 0.
    ** MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    **         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    *  ENDIF.
    ENDFORM.                    " CALL_ALV
    ************** FIRST FIELDCATALOG *************************************
    *&      Form  FLD_CAT
    *       text
    *      -->P_I_FLDCAT[]  text
    FORM fld_cat  USING    p_i_fldcat TYPE slis_t_fieldcat_alv.
      CLEAR i_fldcat.
      i_fldcat-fieldname   = 'VBELN'. "FIELD FOR WHICH CATALOG ID FILLED
      i_fldcat-tabname     = 'IT_SO1'."TABLE NAME
      i_fldcat-seltext_m   = 'SALES ORDER NO.'.
      i_fldcat-col_pos     = 1.        " POSITION OF THE COLUMN.
      i_fldcat-outputlen   = 20.       " SET THE OUTPUT LENGTH.
      i_fldcat-emphasize   = 'X'.      " COLOR OF THIS COLUMN.
      i_fldcat-key         = 'X'.      " SO THAT THIS FIELD IS NOT
      "SCROLLABLE AND HIDDABLE.
      i_fldcat-hotspot     = 'X'.
      i_fldcat-just(1)     = 'C'.
      APPEND i_fldcat.
      CLEAR i_fldcat.
      i_fldcat-fieldname   = 'AUART'. "FIELD FOR WHICH CATALOG ID FILLED
      i_fldcat-tabname     = 'IT_SO1'."TABLE NAME
      i_fldcat-seltext_m   = 'SALES DOC. TYPE'.
      i_fldcat-col_pos     = 2.        " POSITION OF THE COLUMN.
      i_fldcat-outputlen   = 15.       " SET THE OUTPUT LENGTH.
      i_fldcat-emphasize   = 'X'.      " COLOR OF THIS COLUMN.
      i_fldcat-key         = 'X'.      " SO THAT THIS FIELD IS NOT
      "SCROLLABLE AND HIDDABLE.
      i_fldcat-just(1)     = 'C'.
      APPEND i_fldcat.
      CLEAR i_fldcat.
      i_fldcat-fieldname   = 'VKORG'. "FIELD FOR WHICH CATALOG ID FILLED
      i_fldcat-tabname     = 'IT_SO1'.
      i_fldcat-seltext_m   = 'SALES ORG.'.
      i_fldcat-col_pos     = 3.        " POSITION OF THE COLUMN.
      i_fldcat-outputlen   = 12.       " SET THE OUTPUT LENGTH.
      i_fldcat-emphasize   = 'X'.      " COLOR OF THIS COLUMN.
      i_fldcat-key         = 'X'.      " SO THAT THIS FIELD IS NOT
      "SCROLLABLE AND HIDDABLE.
      i_fldcat-just(1)     = 'C'.
      APPEND i_fldcat.
      CLEAR i_fldcat.
      i_fldcat-fieldname   = 'SPART'. "FIELD FOR WHICH CATALOG ID FILLED
      i_fldcat-tabname     = 'IT_SO1'.
      i_fldcat-seltext_m   = 'DIVISION'.
      i_fldcat-col_pos     = 4.        " POSITION OF THE COLUMN.
      i_fldcat-outputlen   = 10.       " SET THE OUTPUT LENGTH.
      i_fldcat-emphasize   = 'X'.      " COLOR OF THIS COLUMN.
      i_fldcat-key         = 'X'.      " SO THAT THIS FIELD IS NOT
      "SCROLLABLE AND HIDDABLE.
      i_fldcat-just(1)     = 'C'.
      APPEND i_fldcat.
      CLEAR i_fldcat.
      i_fldcat-fieldname   = 'KUNNR'. "FIELD FOR WHICH CATALOG ID FILLED
      i_fldcat-tabname     = 'IT_SO1'.
      i_fldcat-seltext_m   = 'SOLD TO PARTY'.
      i_fldcat-col_pos     = 5.        " POSITION OF THE COLUMN.
      i_fldcat-outputlen   = 15.       " SET THE OUTPUT LENGTH.
      i_fldcat-emphasize   = 'X'.      " COLOR OF THIS COLUMN.
      i_fldcat-key         = 'X'.      " SO THAT THIS FIELD IS NOT
      "SCROLLABLE AND HIDDABLE.
      i_fldcat-just(1)     = 'C'.
      APPEND i_fldcat.
      CLEAR i_fldcat.
      i_fldcat-fieldname   = 'POSNR'. "FIELD FOR WHICH CATALOG ID FILLED
      i_fldcat-tabname     = 'IT_SO1'.
      i_fldcat-seltext_m   = 'SALES DOC. ITEM'.
      i_fldcat-col_pos     = 6.        " POSITION OF THE COLUMN.
      i_fldcat-outputlen   = 17.       " SET THE OUTPUT LENGTH.
      i_fldcat-emphasize   = 'X'.      " COLOR OF THIS COLUMN.
      i_fldcat-key         = 'X'.      " SO THAT THIS FIELD IS NOT
      "SCROLLABLE AND HIDDABLE.
      i_fldcat-just(1)     = 'C'.
      APPEND i_fldcat.
      CLEAR i_fldcat.
      i_fldcat-fieldname   = 'MATNR'. "FIELD FOR WHICH CATALOG ID FILLED
      i_fldcat-tabname     = 'IT_SO1'.
      i_fldcat-seltext_m   = 'MATERIAL NO.'.
      i_fldcat-col_pos     = 7.        " POSITION OF THE COLUMN.
      i_fldcat-outputlen   = 20.       " SET THE OUTPUT LENGTH.
      i_fldcat-emphasize   = 'X'.      " COLOR OF THIS COLUMN.
      i_fldcat-key         = 'X'.      " SO THAT THIS FIELD IS NOT
      "SCROLLABLE AND HIDDABLE.
      i_fldcat-just(1)     = 'C'.
      APPEND i_fldcat.
      CLEAR i_fldcat.
      i_fldcat-fieldname   = 'MAKTX'. "FIELD FOR WHICH CATALOG ID FILLED
      i_fldcat-tabname     = 'IT_SO1'.
      i_fldcat-seltext_m   = 'DESCRIPTION'.
      i_fldcat-col_pos     = 8.        " POSITION OF THE COLUMN.
      i_fldcat-outputlen   = 20.       " SET THE OUTPUT LENGTH.
      i_fldcat-emphasize   = 'X'.      " COLOR OF THIS COLUMN.
      i_fldcat-key         = 'X'.      " SO THAT THIS FIELD IS NOT
      "SCROLLABLE AND HIDDABLE.
      i_fldcat-just(1)     = 'C'.
      APPEND i_fldcat.
      CLEAR i_fldcat.
      i_fldcat-fieldname   = 'KWMENG'. "FIELD FOR WHICH CATALOG ID FILLED
      i_fldcat-tabname     = 'IT_SO1'.
      i_fldcat-seltext_m   = 'QUANTITY'.
      i_fldcat-col_pos     = 9.        " POSITION OF THE COLUMN.
      i_fldcat-outputlen   = 15.       " SET THE OUTPUT LENGTH.
      i_fldcat-emphasize   = 'X'.      " COLOR OF THIS COLUMN.
      i_fldcat-key         = 'X'.      " SO THAT THIS FIELD IS NOT
      "SCROLLABLE AND HIDDABLE.
      i_fldcat-do_sum    = 'X'.        " For doing "SUM"
      i_fldcat-just(1)     = 'C'.
      APPEND i_fldcat.
      CLEAR i_fldcat.
      i_fldcat-fieldname   = 'VRKME'. "FIELD FOR WHICH CATALOG ID FILLED
      i_fldcat-tabname     = 'IT_SO1'.
      i_fldcat-seltext_m   = 'SALES UNIT'.
      i_fldcat-col_pos     = 10.       " POSITION OF THE COLUMN.
      i_fldcat-outputlen   = 10.       " SET THE OUTPUT LENGTH.
      i_fldcat-emphasize   = 'X'.      " COLOR OF THIS COLUMN.
      i_fldcat-key         = 'X'.      " SO THAT THIS FIELD IS NOT
      "SCROLLABLE AND HIDDABLE.
      i_fldcat-just(1)     = 'C'.
      APPEND i_fldcat.
    ENDFORM.                    " FLD_CAT
    ****************** ALV SORTING  ***************************************
    *&      Form  SORT
    *       text
    *      -->P_I_SORT  text
    FORM t_sort  USING    p_i_sort TYPE slis_t_sortinfo_alv .
      DATA: i_sort TYPE slis_sortinfo_alv .
      REFRESH p_i_sort .
      CLEAR i_sort.
      i_sort-spos = 1.
      i_sort-tabname = 'IT_SO1'.
      i_sort-fieldname = 'VBELN'.
      i_sort-up = 'X'.
      i_sort-subtot = 'X'.
      i_sort-group = '*'.
      APPEND i_sort TO p_i_sort.
    ENDFORM.                    " SORT
    *FORM SET_PF_STATUS USING rt_extab TYPE slis_t_extab.
    *  SET PF-STATUS 'ZSTANDARD'.
    *ENDFORM. "Set_pf_status
    ***********FORM FOR EVENT USER_COMMAND1********************************
    FORM user_command1 USING r_ucomm LIKE sy-ucomm
                             rs_selfield TYPE slis_selfield.
    *CASE R_UCOMM .
    *    WHEN '&IC1' .
    *    IF rs_selfield-FIELDNAME = 'VBELN' .
    *    ENDIF .
    * WHEN OTHERS .
    * ENDCASE .
      CLEAR wa_so.
      REFRESH: it_del1 .
      IF r_ucomm = '&IC1' AND rs_selfield-fieldname = 'VBELN' AND
      rs_selfield-value IS NOT INITIAL.
        READ TABLE it_so1 INTO wa_so INDEX rs_selfield-tabindex.
        IF sy-subrc = 0.
          LOOP AT it_vbfa INTO wa_vbfa WHERE vbelv = wa_so-vbeln
                                       AND   posnv = wa_so-posnr.
            READ TABLE it_del_ful INTO wa_it_del_ful
                 WITH KEY vbeln = wa_vbfa-vbelv
                          posnr = wa_vbfa-posnn.
            IF sy-subrc = 0.
              CLEAR wa_del.
              MOVE wa_it_del_ful TO wa_del.
              APPEND wa_del TO it_del1.
            ENDIF.
          ENDLOOP.
        ENDIF.
      ENDIF.
    ********* SECOND ALV GRID DISPLAY ***********************************
      CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
       EXPORTING
        i_callback_program                = sy-repid
    *   I_CALLBACK_PF_STATUS_SET          = 'SET_PF_STATUS'
        i_callback_user_command           = 'USER_COMMAND2'
        i_callback_top_of_page            = 'TOP_OF_PAGE'
        i_background_id                   = 'ALV_BACKGROUND'
        it_fieldcat                       = i_fldcat2[]
        it_sort                           = i_sort
        TABLES
        t_outtab                          = it_del_ful
    *  IF sy-subrc <> 0.
    ** MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    **         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    *  ENDIF.
    ENDFORM .                    "USER_COMMAND1
    ********** FORM FOR EVENT USER_COMMAND 2 ******************************
    FORM user_command2 USING r_ucomm LIKE sy-ucomm
                             rs_selfield TYPE slis_selfield.
      CLEAR wa_so.
      REFRESH: it_del1 .
      IF r_ucomm = '&IC1' AND rs_selfield-fieldname = 'VBELN' AND
      rs_selfield-value IS NOT INITIAL.
        READ TABLE it_so1 INTO wa_so INDEX rs_selfield-tabindex.
    *    IF SY-SUBRC = 0.
    *       LOOP AT it_vbfa INTO wa_vbfa WHERE vbelv = WA_SO-vbeln
    *                                    AND   posnv = WA_SO-posnr.
        READ TABLE it_del_ful INTO wa_it_del_ful
             WITH KEY vbeln = rs_selfield-value
                     " vbeln = wa_vbfa-vbeln
                      posnr = wa_vbfa-posnn.
        IF rs_selfield-fieldname = 'VBELN'.
          SET PARAMETER ID 'VL' FIELD wa_vbfa-vbeln .
          CALL TRANSACTION 'VL03' AND SKIP FIRST SCREEN.
        ENDIF .
    *       ENDLOOP.
    *    ENDIF.
      ENDIF.
    ENDFORM .                    "USER_COMMAND2
    ********* SECOND FIELDCATALOG ******************************************
    *&      Form  FLD_CAT2
    *       text
    *      -->P_I_FLDCAT2[]  text
    FORM fld_cat2  USING    p_i_fldcat2 TYPE slis_t_fieldcat_alv .
      CLEAR i_fldcat2.
      i_fldcat2-fieldname   = 'VBELN'. "FIELD FOR WHICH CATALOG ID FILLED
      i_fldcat2-tabname     = 'IT_DEL_FUL'."TABLE NAME
      i_fldcat2-seltext_m   = 'DELIVERY NO.'.
      i_fldcat2-col_pos     = 1.        " POSITION OF THE COLUMN.
      i_fldcat2-outputlen   = 20.       " SET THE OUTPUT LENGTH.
      i_fldcat2-emphasize   = 'X'.      " COLOR OF THIS COLUMN.
      i_fldcat2-key         = 'X'.      " SO THAT THIS FIELD IS NOT
      "SCROLLABLE AND HIDDABLE.
      i_fldcat2-hotspot     = 'X'.
      i_fldcat2-just(1)     = 'C'.
      APPEND i_fldcat2.
      CLEAR i_fldcat2.
      i_fldcat2-fieldname   = 'POSNR'. "FIELD FOR WHICH CATALOG ID FILLED
      i_fldcat2-seltext_m   = 'DELIVERY ITEM'.
      i_fldcat2-col_pos     = 2.        " POSITION OF THE COLUMN.
      i_fldcat2-outputlen   = 20.       " SET THE OUTPUT LENGTH.
      i_fldcat2-emphasize   = 'X'.      " COLOR OF THIS COLUMN.
      i_fldcat2-key         = 'X'.      " SO THAT THIS FIELD IS NOT
      "SCROLLABLE AND HIDDABLE.
      i_fldcat2-just(1)     = 'C'.
      APPEND i_fldcat2.
      CLEAR i_fldcat2.
      i_fldcat2-fieldname   = 'MATNR'. "FIELD FOR WHICH CATALOG ID FILLED
      i_fldcat2-seltext_m   = 'MATERIAL NO.'.
      i_fldcat2-col_pos     = 3.        " POSITION OF THE COLUMN.
      i_fldcat2-outputlen   = 20.       " SET THE OUTPUT LENGTH.
      i_fldcat2-emphasize   = 'X'.      " COLOR OF THIS COLUMN.
      i_fldcat2-key         = 'X'.      " SO THAT THIS FIELD IS NOT
      "SCROLLABLE AND HIDDABLE.
      i_fldcat2-just(1)     = 'C'.
      APPEND i_fldcat2.
      CLEAR i_fldcat2.
      i_fldcat2-fieldname   = 'WERKS'. "FIELD FOR WHICH CATALOG ID FILLED
      i_fldcat2-seltext_m   = 'PLANT.'.
      i_fldcat2-col_pos     = 4.        " POSITION OF THE COLUMN.
      i_fldcat2-outputlen   = 20.       " SET THE OUTPUT LENGTH.
      i_fldcat2-emphasize   = 'X'.      " COLOR OF THIS COLUMN.
      i_fldcat2-key         = 'X'.      " SO THAT THIS FIELD IS NOT
      "SCROLLABLE AND HIDDABLE.
      i_fldcat2-just(1)     = 'C'.
      APPEND i_fldcat2.
      CLEAR i_fldcat2.
      i_fldcat2-fieldname   = 'LGORT'. "FIELD FOR WHICH CATALOG ID FILLED
      i_fldcat2-seltext_m   = 'ST. LOCATION'.
      i_fldcat2-col_pos     = 5.        " POSITION OF THE COLUMN.
      i_fldcat2-outputlen   = 20.       " SET THE OUTPUT LENGTH.
      i_fldcat2-emphasize   = 'X'.      " COLOR OF THIS COLUMN.
      i_fldcat2-key         = 'X'.      " SO THAT THIS FIELD IS NOT
      "SCROLLABLE AND HIDDABLE.
      i_fldcat2-just(1)     = 'C'.
      APPEND i_fldcat2.
      CLEAR i_fldcat2.
      i_fldcat2-fieldname   = 'CHARG'. "FIELD FOR WHICH CATALOG ID FILLED
      i_fldcat2-seltext_m   = 'BATCH NO.'.
      i_fldcat2-col_pos     = 6.        " POSITION OF THE COLUMN.
      i_fldcat2-outputlen   = 20.       " SET THE OUTPUT LENGTH.
      i_fldcat2-emphasize   = 'X'.      " COLOR OF THIS COLUMN.
      i_fldcat2-key         = 'X'.      " SO THAT THIS FIELD IS NOT
      "SCROLLABLE AND HIDDABLE.
      i_fldcat2-just(1)     = 'C'.
      APPEND i_fldcat2.
      CLEAR i_fldcat2.
      i_fldcat2-fieldname   = 'LFIMG'. "FIELD FOR WHICH CATALOG ID FILLED
      i_fldcat2-seltext_m   = 'ACT. DEL. QTY.'.
      i_fldcat2-col_pos     = 7.        " POSITION OF THE COLUMN.
      i_fldcat2-outputlen   = 20.       " SET THE OUTPUT LENGTH.
      i_fldcat2-emphasize   = 'X'.      " COLOR OF THIS COLUMN.
      i_fldcat2-key         = 'X'.      " SO THAT THIS FIELD IS NOT
      "SCROLLABLE AND HIDDABLE.
      i_fldcat2-just(1)     = 'C'.
      APPEND i_fldcat2.
      CLEAR i_fldcat2.
      i_fldcat2-fieldname   = 'VRKME'. "FIELD FOR WHICH CATALOG ID FILLED
      i_fldcat2-seltext_m   = 'SALES UNIT.'.
      i_fldcat2-col_pos     = 8.        " POSITION OF THE COLUMN.
      i_fldcat2-outputlen   = 20.       " SET THE OUTPUT LENGTH.
      i_fldcat2-emphasize   = 'X'.      " COLOR OF THIS COLUMN.
      i_fldcat2-key         = 'X'.      " SO THAT THIS FIELD IS NOT
      "SCROLLABLE AND HIDDABLE.
      i_fldcat2-just(1)     = 'C'.
      APPEND i_fldcat2.
    ENDFORM.                                                    " FLD_CAT2
    ***************** ALV LAYOUT *******************************************
    *&      Form  LAYOUT
    *       text
    *      -->P_I_LAYOUT  text
    FORM t_layout  USING    p_i_layout TYPE slis_layout_alv .
      p_i_layout-zebra  = 'X'.
      p_i_layout-totals_text = 'GRAND TOTAL ='.
    *  p_i_layout-CONFIRMATION_PROMPT = 'X'.
    *  p_i_layout-DEF_STATUS  = ' '.
      p_i_layout-info_fieldname = 'LINE_COLOR'.
    ENDFORM.                    " LAYOUT

  • Abap query table link

    Experts Im doing an abap query then I just link the tables adr2 , adr3 , adr6 and lfa1 and lfb1 in infosets "join button"..then show the fields that I need in sq01.But I was wondering why my data becomes times 4..it repeatedly display my data in FOUR times..
    What do you think is the cause of that?

    dear,
    it depends on which table you selected first (Table join using basis table) and how do you insert next tables.
    i am talking about the info-set creation step.
    let's do a simple query.
    run SQ02. type new infoset name and hit Create.
    type name and type MARA for "Table join using basis table" radio button. Hit Continue.
    now insert (add) tables: MARC, MCHA, CABN, CAWN
    think about Inner Join or Left Outer Join !!'
    say, if you need to display all materials (even if not exist on plant) set Left Outer Join. if you're after materials existing on plant keep default Inner Join.
    friend, my example above is only the example.
    make sure you undertsand how to build a sap query in general.
    never set many tables at once. insert 2-3 tables, return to your query (SQ01) or create it, adjust it and test. step by step - table by table. add the new table in infoset, add the fields, generate it and come back to your query. adjust it and test.
    good luck!

  • Joins +ABAP Query

    Dear ALL,
    When we will use joins in internal table example joining or two or more  table.
    And Explain abt ABAP Query.
    Regards
    Vikas

    Hi
    Syntax
    ... [(] {dbtab_left [AS tabalias_left]} | join
    {[INNER] JOIN}|{LEFT [OUTER] JOIN}
    {dbtab_right [AS tabalias_right] ON join_cond} [)] ... .
    Effect
    The join syntax represents a recursively nestable join expression. A join expression consists of a left-hand and a right- hand side, which are joined either by means of [INNER] JOIN or LEFT [OUTER] JOIN . Depending on the type of join, a join expression can be either an inner ( INNER) or an outer (LEFT OUTER) join. Every join expression can be enclosed in round brackets. If a join expression is used, the SELECT command circumvents SAP buffering.
    On the left-hand side, either a single database table, a view dbtab_left, or a join expression join can be specified. On the right-hand side, a single database table or a view dbtab_right as well as join conditions join_cond can be specified after ON. In this way, a maximum of 24 join expressions that join 25 database tables or views with each other can be specified after FROM.
    AS can be used to specify an alternative table name tabalias for each of the specified database table names or for every view. A database table or a view can occur multiple times within a join expression and, in this case, have various alternative names.
    The syntax of the join conditions join_cond is the same as that of the sql_cond conditions after the addition WHERE, with the following differences:
    At least one comparison must be specified after ON.
    Individual comparisons may be joined using AND only.
    All comparisons must contain a column in the database table or the view dbtab_right on the right-hand side as an operand.
    The following language elements may not be used: BETWEEN, LIKE, IN.
    No sub-queries may be used.
    For outer joins, only equality comparisons (=, EQ) are possible.
    If an outer join occurs after FROM, the join condition of every join expression must contain at least one comparison between columns on the left-hand and the right-hand side.
    In outer joins, all comparisons that contain columns as operands in the database table or the view dbtab_right on the right-hand side must be specified in the corresponding join condition. In the WHERE condition of the same SELECT command, these columns are not allowed as operands.
    Resulting set for inner join
    The inner join joins the columns of every selected line on the left- hand side with the columns of all lines on the right-hand side that jointly fulfil the join_cond condition. A line in the resulting set is created for every such line on the right-hand side. The content of the column on the left-hand side may be duplicated in this case. If none of the lines on the right-hand side fulfils the join_cond condition, no line is created in the resulting set.
    Resulting set for outer join
    The outer join basically creates the same resulting set as the inner join, with the difference that at least one line is created in the resulting set for every selected line on the left-hand side, even if no line on the right-hand side fulfils the join_cond condition. The columns on the right-hand side that do not fulfil the join_cond condition are filled with null values.
    Example
    Join the columns carrname, connid, fldate of the database tables scarr, spfli and sflight by means of two inner joins. A list is created of the flights from p_cityfr to p_cityto. Alternative names are used for every table.
    PARAMETERS: p_cityfr TYPE spfli-cityfrom,
    p_cityto TYPE spfli-cityto.
    DATA: BEGIN OF wa,
    fldate TYPE sflight-fldate,
    carrname TYPE scarr-carrname,
    connid TYPE spfli-connid,
    END OF wa.
    DATA itab LIKE SORTED TABLE OF wa
    WITH UNIQUE KEY fldate carrname connid.
    SELECT ccarrname pconnid f~fldate
    INTO CORRESPONDING FIELDS OF TABLE itab
    FROM ( ( scarr AS c
    INNER JOIN spfli AS p ON pcarrid = ccarrid
    AND p~cityfrom = p_cityfr
    AND p~cityto = p_cityto )
    INNER JOIN sflight AS f ON fcarrid = pcarrid
    AND fconnid = pconnid ).
    LOOP AT itab INTO wa.
    WRITE: / wa-fldate, wa-carrname, wa-connid.
    ENDLOOP.
    Example
    Join the columns carrid, carrname and connid of the database tables scarr and spfli using an outer join. The column connid is set to the null value for all flights that do not fly from p_cityfr. This null value is then converted to the appropriate initial value when it is transferred to the assigned data object. The LOOP returns all airlines that do not fly from p_cityfr.
    PARAMETERS p_cityfr TYPE spfli-cityfrom.
    DATA: BEGIN OF wa,
    carrid TYPE scarr-carrid,
    carrname TYPE scarr-carrname,
    connid TYPE spfli-connid,
    END OF wa,
    itab LIKE SORTED TABLE OF wa
    WITH NON-UNIQUE KEY carrid.
    SELECT scarrid scarrname p~connid
    INTO CORRESPONDING FIELDS OF TABLE itab
    FROM scarr AS s
    LEFT OUTER JOIN spfli AS p ON scarrid = pcarrid
    AND p~cityfrom = p_cityfr.
    LOOP AT itab INTO wa.
    IF wa-connid = '0000'.
    WRITE: / wa-carrid, wa-carrname.
    ENDIF.
    ENDLOOP.
    Query
    http://help.sap.com/saphelp_46c/helpdata/en/35/26b413afab52b9e10000009b38f974/content.htm
    http://www.thespot4sap.com/Articles/SAP_ABAP_Queries_Introduction.asp
    Step-by-step guide for creating ABAP query
    http://www.sappoint.com/abap/ab4query.pdf
    ABAP query is mostly used by functional consultants.
    SAP Query
    Purpose
    The SAP Query application is used to create lists not already contained in the SAP standard system. It has been designed for users with little or no knowledge of the SAP programming language ABAP. SAP Query offers users a broad range of ways to define reporting programs and create different types of reports such as basic lists, statistics, and ranked lists.
    Features
    SAP Query's range of functions corresponds to the classical reporting functions available in the system. Requirements in this area such as list, statistic, or ranked list creation can be met using queries.
    All the data required by users for their lists can be selected from any SAP table created by the customer.
    To define a report, you first have to enter individual texts, such as titles, and select the fields and options which determine the report layout. Then you can edit list display in WYSIWYG mode whenever you want using drag and drop and the other toolbox functions available.
    ABAP Query, as far as I Believe, is the use of select statements in the ABAP Programming. This needs a knowledge of Open SQL commands like Select,UPdtae, Modify etc. This has to be done only by someone who has a little bit of ABAP experience.
    To sum up, SAP queries are readymade programs given by SAP, which the user can use making slight modification like the slection texts, the tables from which the data is to be retrieved and the format in which the data is to be displayed.ABAP queries become imperative when there is no such SAP query existing and also when there is a lot of customizing involved to use a SAP Query directly
    use either SQ02 ans SQ01
    or SQVI tr code
    for more information please go thru this url:
    http://www.thespot4sap.com/Articles/SAP_ABAP_Queries_Create_The_Query.asp
    http://goldenink.com/abap/sap_query.html
    Please check this PDF document (starting page 352) perhaps it will help u.
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVQUE/BCSRVQUE.pdf
    check the below link will be helpful for u
    Tutorial on SQVI
    once you create query system generates a report starting with AQZZ/SAPQUERY/ABAGENCY2======= assing this report to tr code for the same
    <b>Reward points for useful Answers</b>
    Regards
    Anji

  • ABAP Query - Table for Batch, Char values & desc.

    Hi Gurus,
    Looking for a Table join for requirement to fetch Characteristic description, char values & Batch no  in ABAP query.
    Thanks.

    dear,
    it depends on which table you selected first (Table join using basis table) and how do you insert next tables.
    i am talking about the info-set creation step.
    let's do a simple query.
    run SQ02. type new infoset name and hit Create.
    type name and type MARA for "Table join using basis table" radio button. Hit Continue.
    now insert (add) tables: MARC, MCHA, CABN, CAWN
    think about Inner Join or Left Outer Join !!'
    say, if you need to display all materials (even if not exist on plant) set Left Outer Join. if you're after materials existing on plant keep default Inner Join.
    friend, my example above is only the example.
    make sure you undertsand how to build a sap query in general.
    never set many tables at once. insert 2-3 tables, return to your query (SQ01) or create it, adjust it and test. step by step - table by table. add the new table in infoset, add the fields, generate it and come back to your query. adjust it and test.
    good luck!

  • Order Query in SQ01 using Table Joins in CRM

    Hello Experts,
    I am trying to create a query using table joins in SQ01 in CRM because I need a report that will give me all transactions for a selected Business Partner.  I am unable to display any results when running my query.  I have found other threads which give a list of possible tables to join together, but the fields used in the joins were not described. 
    The tables I have joined in my query are as follows:
    CRMD_ORDERADM_H
    CRMD_ORDER_INDEX
    CRMD_PARTNER
    BUT_000
    I have used SE16 to try to search for additional tables to use for linking the Business Partner with a transaction, but I have been unsuccessful.
    Would anyone please give advice as how to proceed? 
    Reward points are available!
    Thank you in advance,
    David

    David
    The link with be the GUID.
    CRMD_ORDERADM_H = Document Header Table
    CRMD_ORDERADM_I = Document Line item Table
    CRMD_LINK = Lists various ‘link’ GUIDs, to
    access order Information
    The Table CRMD_ORDERADM_H will contain you transactions , once you find the GUID of your sales transaction in the table CRMD_ORDERADM_H.
    You then need to check the table CRMD_LINK.
    In this table you will then find a number in 11 = sales. This refers to the table CRMD_SALES. There are also links to many other tables ie Shipping, pricing, org etc.
    CRMM_BUT_SET0140 - for Sales Group, Sales Office, District
    CRMM_BUT_LNK0141 - for Sales Area data
    Transaction CRMD_BUS2000115 allows you to see all sales transactions for a BP. CRMD_BUS2000126 shows you activities for selected BP.
    Regards
    M

  • Internal table in ABAP Query

    Hi all,
    Can we use internal table in ABAP/SAP Query (Infoset - SQ02)? If yes, Pls guide me on the same.
    Thanks in advance
    Regards
    Madhumathi A

    to my knowledge u can't use internal tables in ABAP query...it is a mix of tables...

Maybe you are looking for