Table layout and image display problems

Im having a few problems at the moment, designing a layout
using tables. I need to have 3 seperate tables, 1 for the left
side, 1 for middle and 1 for the right. However I can only get the
left and middle table on the same row, after that the right table
jumps down to the next row.
My second problem is with some images displaying in the
preview. 3 images wont display, they are the same extension (.jpg),
in the same folder as the rest but unlike the others wont display.
I can swap them out for other images which display fine so I cant
understand why they arent showing.
Any help would be most appreciated.

> Im having a few problems at the moment, designing a
layout using tables. I
> need
> to have 3 seperate tables, 1 for the left side, 1 for
middle and 1 for the
> right. However I can only get the left and middle table
on the same row,
> after
> that the right table jumps down to the next row.
Use a three column, 1 row table, and put one of your tables
into each of the
three cells.
> so I cant understand why they arent showing.
Show us the page, please.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Isileth" <[email protected]> wrote in
message
news:ev0dpc$60t$[email protected]..
> Im having a few problems at the moment, designing a
layout using tables. I
> need
> to have 3 seperate tables, 1 for the left side, 1 for
middle and 1 for the
> right. However I can only get the left and middle table
on the same row,
> after
> that the right table jumps down to the next row.
>
> My second problem is with some images displaying in the
preview. 3 images
> wont
> display, they are the same extension (.jpg), in the same
folder as the
> rest but
> unlike the others wont display. I can swap them out for
other images which
> display fine so I cant understand why they arent
showing.
>
> Any help would be most appreciated.
>

Similar Messages

Problem: codebase, jar and image reloading problem please help!

Hi Java Gurus,
I have written an applet that extends JApplet for viewing webcam. In order to reduce the download time I put my classes into a doorcam.jar file. The following is my <applet> tag in my html file.
<applet code="CameraApplet.class"
archive="doorcam.jar"
codebase = "webcam/classes"
width="375" height="475">
<param name="imagePath" value="http://judge/webcam/images">
<param name="webCamImage" value="door.jpg">
<param name="COMPort" value="COM2">
<param name="frameRate" value="10"> 
<param name="host" value="judge">
</applet>
The fist problem is that my class file does not get loaded from the jar file if i provide the "codebase" attribute as above. Instead the browser load every single class file from the webserver. This has some problem too. Coz the browser sometimes just thorough NullPointerException or ClassNotFoundException. After much of debugging I found out that the problem is the IE browser which seldom fails to load classes or image file from the server. If i referesh the browser the applet and all its classes loaded successfully and runs smoothly. This behaviour never occurs when running with "appletviewer".
I wanted all my classes to be loaded from my jar file. After much of trial and error I found out that if i remove "codebase" attribute the browser loads the classes from my jar file and applet loads very fast. This is where the second problem comes in. The browser does not reload my webcam image file so that the webcam become alive with live images, like before.
If I run on "appletviewer" everything works fine my web cam is displayed properly. But in IE browser the image does not get reloaded when I refresh my image to give live to my webcam display. The refresh method is given below.
private void refresh(final URL url) {
Image webCamImage =getImage(url);
webCamImage.flush(); // flush out the previous image
webCamImage = getImage(url); // get a new image
webCamImageIcon.setImage(webCamImage); webCamImageIcon.paintIcon(webCamLabel, webCamLabel.getGraphics(), 15, 15);
When I add the "codebase" attribute back, the image gets reloaded for every refresh() and everything works fine. But the classes are also loaded from the server. And occasionally also suffers Class loading and image loading problem. As I presented earlier, when I do refreshing in the browser everything gets loaded and the applet function correctly with web cam displaying very well.
The problem is so strange that I could not find any way to solve it.
It would be a great help to me if somebody provide me some work around to the problem.
I tested on Windows 2000, Windows XP, IE 5.5, IE 6 with J2SDK 1.4.0.
Thank you all very much in advance.
best regards,
Judge

Thank you so much for the suggestions. I did tried the way u suggested. The problem still the same.
I think its the problem between IE browser and Java Plug-in.
I which SUN would find these incompatibilities and solve these problems.
I even tried using java SDK and plug-in 1.4.1 it even worst. It can't even load an applet. And it does not show any loading messages nor any error messages. It just show a cross sign on the upper left coner.
I would be so glad, if Sun would try to eliminate the inconsistancies such as caching, loading, initializing etc between browser and its Java plug-In. For example, applets behave well in appletviewer and behave unpredictably in browser environment.
I have seen so many people in the forums with all sorts of problems because of this.
Right now I m desperately looking for work around to my problem.
If somebody would provide me with the solution to my problem it would be a great help to me.
thank you all so much.
best regards,
Judge

How to solve the image display problem in the iTunes Store

Hi guys!
I just want to give a work-around for all of you having the image display problem in the iTunes Store. In my case only the square images in the slider sections won't load:
I had this in my last W7-installation and got it again in W8 after the first few weeks.
There are a lot of reports about this problem out there and adhoc solutions like 'clear the cache' or 'reinstall and drink ice tea' that do not work. It is obviously a file request error. It is all about finding out which server addresses get blocked by your computer.
Solution: Go to your firewall and your Anti-virus-program. There must be a whitelist option. In Kaspersky, check the web-options, the banner-options and the firewall-options, because the all have whitelists. The following addresses have to be whitelisted:
*.apple
*.mzstatic.apple.com.akadns.net
*.mzstatic.com.edgesuite.net
*.da1.akamai.net
*.itunes.apple.com
se.itunes.apple.com
upp.itunes.apple.com
ax.init.itunes.apple.com
xp.apple.com
*.mzstatic.com
client-api.itunes.apple.com
www.apple.com.edgekey.net
www.isg-apple.com.akadns.net
Press Ctrl + R in the iTunes Shop then and browse throught the music sections. All images should be displayed correctly now.
If not, there might be more Apple servers involved in your case. You can find them by running a DNS sniffing tool like the DNS query sniffer by Nirsoft or Wireshark.

Phone restarting randomly could be loose battery. Tighten by putting a small strip of electrical tape on the back edge.
THE BITTERNESS OF POOR QUALITY, LINGERS LONG AFTER THE CHEAPNESS OF PRICE, IS SOON FORGOTTEN.

SSRS indicator image display problem!!

Hello ALL;
I am having problem with displaying indicator image in DEV report manager. but same rdl works in QA environment. Both server has SP1 installed. Any Idea? Appreciate for your help. Thanks,

Hi Techchi,
Based on the limited information, I cannot figure it out for this issue. As per my understanding, I think this issue can be caused by the browser that run the report manager. If you use IE explorer to render the report, I suggest that you can try to run
it in compatibility mode. If you are using another browser, I recommend that you should use IE explorer to render the report to check the issue again.
If this issue still exists, in order to solve the problem more efficiently, I need to clarify some information.
Are all reports with indicator image cannot render well in DEV report manager? Or just this one report?
What is the phenomenon about the indicator image display problem? Could you please post a screenshot about this?
It is benefit for us to do further analysis. Thank you for your understanding.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Image display problem

Dear all,
I have problem in adding scroll pane to an image.
There are two JPanels and one is with Grid Layout and another with default Layout. The Panel with grid layout consists of three buttons and one JTextArea. JTextArea has been given scrollpane. this panel is working fine.
In the other Panel , there are two JTextAreas and one JLabel with Imageicon attched to it.
I want to display an image ( a small (12X12) or big (800X600) pixel resolution in this Label. When i try to display an 800X600 res. image in this label the image is overlapping all the other components in this Jpanel. The small image is working fine on display . I used viewport to set new Dimensions , but it is not working. scroll pane is also invisible.
How to display a big image in a small( with given height,width) viewport with scrollpane attched to it in this panel?
The sample code is as under. The one.jpg is an 800by600 res. image.
import javax.swing.*;
import java.awt.*;
import java.io.*;
public class testfile extends JFrame{
public testfile(){
JPanel j1=new JPanel(new GridLayout(1,5));
JPanel j2=new JPanel();
JTextArea jt1=new JTextArea(10,10);
JTextArea jt2=new JTextArea(10,10);
JTextArea jt3=new JTextArea(10,10);
JLabel jlb=new JLabel(new ImageIcon("one.jpg"));
jt1.setText("kk"); jt2.setText("jj"); JButton jb1=new JButton("JB1");
JButton jb2=new JButton("jb2");
JButton jb3=new JButton("jb3"); JButton jb4=new JButton("jb4");
j1.add (jb1); j1.add(jb2); j1.add(jb3); j1.add(jb4);
j1.add(jt1); j2.add(jt2); j2.add(jt3); j2.add(jlb);
JScrollPane sp1 = new JScrollPane(jt1); JScrollPane sp2 = new JScrollPane(jt2);
JScrollPane sp3=new JScrollPane(jt3); JScrollPane sp4=new JScrollPane(j1); j2.add(sp4,BorderLayout.CENTER); JViewport vp=sp4.getViewport();
vp.setViewSize(new Dimension(1,1)); j1.add(sp1, BorderLayout.CENTER);
j2.add(sp2, BorderLayout.CENTER); j2.add(sp3, BorderLayout.CENTER);
JPanel jp= new JPanel( ); Container cp=getContentPane();
cp.setLayout(new BorderLayout()); cp.add(j1,BorderLayout.NORTH);
cp.add(j2,BorderLayout.SOUTH);
public static void main(String args[]){
JFrame j =new testfile();j.setSize(300,300);j.setTitle(" Not working");
j.setDefaultCloseOperation(EXIT_ON_CLOSE); j.show(); }}

Please use code tags when posting code:
[code]
JPanel p = new JPanel();
etc...
[/code]
Your problems have nothing to do with Images per se. I think you just
need to understand layout managers better. For example, you are
doing things like this:
j1.add(sp1, BorderLayout.CENTER);
j2.add(sp2, BorderLayout.CENTER);
j2.add(sp3, BorderLayout.CENTER);Even though JPanels j1 and j2 aren't using a BorderLayout.
(and even if j2 were using a BorderLayout, you can't add 2 components
to the center of one!) (The default layout in a JPanel is FlowLayout, by the way.)
Take the tutorial: http://java.sun.com/docs/books/tutorial/uiswing/layout/index.html

SPRY image display problem with data sets! "

Dreamweaver CS4
I really want to use a Spry Data set created with an HTML table (versus XML)
I've done this step by step several times(after changing local sites and images) and every time I preview the results, each one of my images has a "> in front of it.
I don't know how to get rid of this "> character!
I've provided two HTML files used to create this:
TABLE.html is the source
SpryTable.html is the actual file pulling TABLE.html for data
The images are images, I'm not going to provide them since anyone can add a random image just to see if the "> appears.
I'm not going to include the java files since dreamweaver generates them on their own.
Thanks!

Jason, the best place for us to analyze your files is from a server. Have you uploaded them?
The second best place is in a set of site files...including the HTML table, the display file that uses the HTML table, the CSS and javascript file.
Without those, it is pretty nigh impossible to work this problem!
I suspect the errant character appears somewhere in your data table, but based on what you have shown us, it's hard to say.
When you defined the dataset, did you indicate that the column containing the images is type="HTML"? If you have left it as type="string", it is interpreting the > as text.
Beth

Email images display problem

I have a problem with email attached images.. When I open the email it's all appearing fine but after few seconds the page gets begger and only half of it appears and I can't see the other half no matter how much I scroll.. I'm om ios5.0.1 now but I've been having the same problem even with ios4.. Can you help me please!! Thank you..

URL? Code?
Nancy Gill
Adobe Community Expert
Author: Dreamweaver 8 e-book for the DMX Zone
Co-Author: Dreamweaver MX: Instant Troubleshooter (August,
2003)
Technical Editor: Dreamweaver CS3: The Missing Manual,
DMX 2004: The Complete Reference, DMX 2004: A Beginner's
Guide
Mastering Macromedia Contribute
Technical Reviewer: Dynamic Dreamweaver MX/DMX: Advanced PHP
Web Development
"kidcobra" <[email protected]> wrote in
message
news:g2oqb0$bgq$[email protected]..
> PHP, dynamic images from mysql dbase....diplay on local
server, but will
> only
> display on web server if in the same level or folder as
the php page.
> Locally,
> I have put the path to the images in the dbase in front
of the URL of the
> image, and all works fine.... but with that path in
there and images not
> in
> same folder as page, no web server display. I know I'm
missing the
> obvious, but
> need help if anyone has the simple answer . Thanks
>

Background image display problem in IE6

I'm having another problem with my CSS. This one involves some background images not displaying properly in IE6. My navbar is an unordered list, and I'm using an image replacement technique to swap out the text for background images that serve as the buttons. The height of each button is 12 pixels, and the rollover is created by offsetting the image -12 pixels to reveal the bottom half of the image. So far so good. The images appear in all browsers, but IE6 displays more than 12 pixels of the image, revealing part of the rollover below it.
Here's the page in question: http://www.colbydesign.com/redesign/index.html
Here's a screen shot from BrowserLab of how the page looks in IE6: http://www.colbydesign.com/redesign/images/ie6_screenshot.jpg
The <ul> height and image height are set to 12 pixels. I can't figure out why IE6 has a problem with the CSS. Maybe there's an IE6 hack I can use? Any help would be appreciated.
Thanks,
R-Co

I didn't have a chance to work through the whole problem, but I believe that the font size of your "off-screen" menu text is pushing down the size of your ul and your li, as I see "overflow" outlines on that specific div.
Try giving those items #header h1 a, specifically, a smaller defined font size.
Alternatively, try applying an "overflow: hidden;" to the hover definition.
Beth

Gif image display problem

I can't get QuickTime to display gif images from the web. It will show the same gif file on my local machine, but if I put it on the web it will no longer display. My web browser shows that the url is valid, and will display the gif image. But QuickTime returns a "Error 47: Invalid URL" I have tried multiple computers, and have the same problem.

First.
You don't need a browser plug-in to display a .gif file and you really don't want to use QuickTime plug-in to display them.
If you can view the .gif in a blank browser window (all by itself) copy that URL.
Open QuickTime Player and Control-U. Paste the URL and see what happens.
My blue Q has this URL:
http://supportdownload.apple.com/discussions.apple.com/avatar-display.jspa?avata rID=111&file=av.png
It is a .png file file but any image format could be used. Copy the URL and test to see how it works.

Rescue and Recovery display problem

I'm running Rescue and Recovery 4.21.0016.00 and when I boot the R&R rescue media boot disk I come up with the screen that shows the options however the the image is too big to fit the screen. I've tried 2 different monitors but the program makes the image size too large so that I can't see all the options and pick what I wnat to do. I'm running this on a IBM Netvista 8307-GU6. Any ideas out there????????

I found another post for the same problem and found the fix. went into the BIOS and increased the display memory and that fixed my display problem. Now if I can just find out why the R&R program won't recognize the backup file when I boot from the CD I'll be happy. The backup file is on a USB drive and when I look at it from the Windows XP side it shows it being there but booting from the CD there are no backup files to restore from. Any ideas????

Dreamweaver and CSS display problem

Hi,
I am new to CSS layouts and trying to build a site in pure
CSS but I am having a problem with how it is dispayed within
dreamweaver.
here is
the html page as it looks in a browser
But
here is how the page currently looks is dreamweaver
As you can see, my divs which run along the bottom of the
page in the browser are actually shown contained in another div in
dreamweaver which is very misleading!
Is this due to something i have done or is this how it
displays in dreamweaver?
HTML code as follows:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01
Transitional//EN"
http://www.w3.org/TR/html4/loose.dtd">
<html>
<head>
<meta http-equiv="Content-Type" content="text/html;
charset=iso-8859-1">
<title>Untitled Document</title>
<link href="lovellkits.css" rel="stylesheet"
type="text/css">
</head>
<body>
<div id="main">
<div id="logo"></div>
<div id="navbar">Nike Kits | Optimum Kits | Lovell
Rugby Kits | Training Wear | Equipment</div>
<div id="bannerlarge"></div>
<div id="smlbanner1"></div>
<div id="smlbanner2"></div>
<div id="smlbanner3"></div>
<div id="smlbanner4"></div>
</div>
</body>
</html>
and
my CSS can be found here
Thanks for reading
Steve

FWIW, there were significant rendering improvements made in
DW8, so it
may be worth the upgrade if you're creating layouts in DW.
In the meantime, try adding some content to the bannerlarge
container. I
think DW may be incorrectly collapsing that tag since it's
empty.
HTH,
Randy
> Dreamwaever MX 2004 for the mac

Mid 2010 Macbook Pro sleep and external display problem

I recently upgraded to the new 2010 15 inch core i7 Macbook Pro. The problem i have is that it will not detect an external display (23inch Cinema) after waking from sleep. This happens after using the display to extend the desktop and also when using the Macbook in closed mode.
I've managed to get it to detect the display only after either restarting the Macbook completely or by going into energy saver and switching to dedicated graphics then going back to detect display.
It seems that when on integrated graphics it doesn't register that an external display is connected. If i leave a program open and running that causes the dedicated graphics to kick in then it works ok. If i close all programs, shut the macbook pros lid, computer sleeps and external display shuts off. If i click the mouse to wake with lid closed, apple logo lights, machine starts up few seconds later macbook returns to sleep. If i open the screen the machine wakes as normal but the external monitor doesn't.
Any help is much appreciated as its starting to frustrate me now...
Many thanks
oh and im running OSX 10.6.3

I thought it was intermittent to begin with until i started looking into it. By leaving programs open, like aperture, before i put the machine to sleep it appears to wake the external monitor up without a problem. If i shut all programs or leave basic things open like safari and mail which don't require the dedicated graphics, then upon wake it wont register an external screen is connected.
Manually detecting displays in settings doesn't work.
Disconnecting and reconnecting mini display port doesn't work.
Turning off power to cinema display and powering back up doesn't work.
To get the display going again its either 1) turn off macbook pro and re-boot or 2) re-start the machine then the display is automatically recognised. Or 3) launch a programme that kicks in dedicated graphics then manually go in and detect displays again..... like magic the display then springs to life.
No ideas anyone??

How to solve the flash Builder 4.6 scroll view and textinput display problem?

I have a dynamic form application which worked well on flash builder 4.5, having display problems in flash builder 4.6 now. What I did is adding
TextInput objects to a scroll view and set the texts for them dynamically. Everything is fine after the screen loaded. But if I scroll down, sometimes the texts will be placed in wrong positions. I attached the screen copy of the wrong display. Does anybody know how to solve this problem? Thanks.

Check out the two threads below (if you have not already). I have not tried it but aeonus describes an approach that made me think of something that might work ... It is a workaround but, what if you have a text field (txtA) with the skin that does not allow soft keyboard selection, but does scroll correctly, and on the onClick event of that text field, you dynamically cover it with another text field (txtB) that does allow soft keyboard selection, (but does not scroll properly) and trigger the keyboard. After you get the entry from the user, set the value of txtA and destroy txtB ... leaving you (theoretically) with properly scrolling text fields. If you have a lot of those in your app, you might want to write a component that implements that behavior.
"Create a dynamic textfield, and on click, invoke create a StageText instance at the same location as the textfield (by setting the StageText.viewPort property)
Finally, set StageText.softKeyboardType to "numeric" and call StageText.assignFocus();"
http://forums.adobe.com/thread/915019?tstart=0
http://forums.adobe.com/thread/911214?tstart=0

Complex layout and images on webdynpro

Hello:
I've been using webDynpro for some apps, and I couldn't help noticing how "hars" the final GUI is... is there a way that I can import an HTML file and start importing eviews from there?
You know websites usually start in photoshop, I create the layout, images, branding there and then export as -> html and images so I get a really cool layout (designers point of view)
Then I'd go to dreamweaver and insert all php jsp and programmatic stuff... I'd like to import the htmls into webdynpro instead of dreamweaver, is that possible? if not, how can I embed things like flash, javascript, etc?
Thanks!
alejandro

Hi
If you are looking for change layout, style, look and feel,... without recompile and that...
why don't you use WebDynpro themes.
Go thorugh the follwing Web Dynpro Java
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/business_packages/a1-8-4/nw04stack09themes.zip
To know how to use it and for the steps to be followed please follow the tutorial here
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/documents/a1-8-4/how to edit web dynpro themes.pdf
the last url gives you a step by step procedure with wizards..
Regards,
RK

KM Document and images anonymous problem

We are using an anonymous portal and we display km documents.
The km iviews are set to anonymous (authentication scheme) and are being displayed correctly.
However, references to KM images require authentication.
Any thoughts?
Noë

Hi Joann,
I resolved this issue. Mine is NW 2004s SP 10 Server. I applied SAP Note 837898.
Actually if yours is 2004s you don't need to apply all the points in that note. Most them are already there in this version. I applied the last point which is below.
Go to
Content Administration>Portal Content>Portal Content>Portal Users>Standard Portal Users>Standard User Role > Open >Object
Navigate to Home(tooltip will be Knowledge Management Home)>Hidden>URL Access
Open all contained iViews(Basic Search,Details,Doument,Highlighted Content,Document iView with out Content,Navigation) for editing and change the property "Authentication Scheme" to "anonymous" and Save changes.
If your server is 2004 then follow complete Note.
Best of luck
Sreekanth

Table layout and image display problems

Similar Messages

Maybe you are looking for