Table LTDX entries

The table reference above is used for "Generic Storage of Layouts", I
> presume this is all releated to ALV reports. The last two fields in
> the table are CLUSTR and CLUSTD. Can somebody tell me where to find
> the information that these two fields point to? I have a report
> that has a layout referenced in this table and I need to change it,
> but so far I haven't found where it is. I'm betting that it might be
> buried in this cluster.
>
> Any info would be appreciated.

Hi
Here i am giving some details about those two fields
1- Go to that table
2- Click on that particular field
and you find out below details
Field - clustd
Domain - indx_clust
Data type - LRAW
Field - clustr
Domain - sybin2
Data type - int2
CLUSTR - Data Length
CLUSTD - Data
Thanks
Mrutyunjaya Tripathy

Similar Messages

Opening a new view in a new window on click of a table row entry.

Hi Guys,
How to open a new View of a same application in a new window (just like a pop up) on a click of a Table Row entry?
I am using NWDS 7.0 version. So please suggest acccorrdingly.

Hi Nikesh,
first of all you will have to declare use of onLeadSelect event handler for your table (note that it will only be triggered when a lead selection occurs not a multiselection).
Also, you can build at design time a View and a Window (for example, PopupWin) in your WebDynpro Component, and embed the view into the window.
In your code for onLeadSelect function, you can use something like this to pop up the window.
public void onActionRowSelection(com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent wdEvent )
    //@@begin onActionSeleccionTabla(ServerEvent)
    IWDWindowManager windowManager = wdComponentAPI.getWindowManager();
    IWDWindowInfo windowInfo = wdComponentAPI.getComponentInfo().findInWindows("PopupWin");
    IWDWindow window = windowManager.createModalWindow(windowInfo);
    window.setWindowPosition(WDWindowPos.CENTER);
    window.setWindowSize(new WDCssSize(450, WDWindowUnitOfLength.PX) , WDCssSize.UNDEFINED);
    // Store handle ti window in context attribute to able to close it later
    wdContext.currentContextElement().setPopup(window);
    window.show();
    //@@end
Hope it helps,
David

Error while creating table "EDISEGMENT' entry 'BIC/CIBA0PLANT_ATTR

While loading master data for 0PLANT, its giving me following error.
"error while creating table "EDISEGMENT' entry 'BIC/CIBA0PLANT_ATTR"
Please help me out.
Thanks

steve,
Can you give the solution you used to correct this problem?
This error occurred in BW during import.
Raj.

Check table TFBEFU_CR: entry 10 does not exist

Dear all
When i am doing GR for Order (T.Code : MB31),the system displays the following message.
Check table TFBEFU_CR: entry 10 does not exist
plz give me the solution as early as possible,bcaz it is very urgent to me.
Thanks in advance.
Regards
Basava sreenu

Dear Mr.Basava,
I'm not sure,but try with this.
For the particular material which you are using in MB31 for Good's receipt for
Order,check whether the storage location is present in T code MMSC-Extend
material storage location.If not add and save,then try in MB31.
If useful reward points.
Regards
Mangal

Error while creating table 'EDISEGMENT' entry for Transfer Structures

Hi Guyz...
I've been facing a few issues regarding activation of transfer structures.
I'll explain the whole process...so it makes sense to you guys.
I've initially activated the Transfer Structures in BI Content for Master Data. Later on we faced some issues in the DEV server. So we had to transport all the objects and store them locally on a temporary location. When the BI DEV sever, was up and running, we transported all the objects back to the server.
Now while moving the objects back to the sever. We had an errors in the Master Data Request (Log- Method Execution). After going into the log...this is what I found.
Error while creating table 'EDISEGMENT' entry '/BIC/CIIA0DIVISION_TEXT'
Error while creating table 'EDISEGMENT' entry '/BIC/CIIA0DISTR_CHAN_TEXT'
Error while creating table 'EDISEGMENT' entry '/BIC/CIIA0MATL_TYPE_TEXT'
Error while creating table 'EDISEGMENT' entry '/BIC/CIIA0SALESORG_TEXT'
Error while creating table 'EDISEGMENT' entry '/BIC/CIIA0SALES_GRP_TEXT'
I hope, I am clear here.
Any suggestions, guys...
Thanks,
Regards,
G

Hi,
Please check this link:
Error while creating table EDISEGMENT entry
Hope it helps.
Thanks and Regards,
MuraliManohar.

Error while creating table 'EDISEGMENT' entry '/BIC/CIBD0BILBLK_DL_TEXT'

Hi All,
I am getting a error"Error while creating table 'EDISEGMENT' entry", when running the program RS_Transtru ActivateAll to activate the transfer rules as we had reconnected our source system,
we are on 2004s server and on SP level 17, I understand that this issue is created as the transfer rules are using IDOC as transfer method, and I Cannot manually change the transfer method to PSA and activate as the number of transfer rules with this issue are huge in number.
Please suggest the suitable solution
Thank you in advance
krishna
Edited by: krishna dvs on Feb 17, 2009 1:24 PM

Hi,
Please check the note 493422. The reports listed in the note
should correct the inconsistencies and afterwards you can re-import the
request and it should then work.
Regards,
Srikanth

Error while creating table 'EDISEGMENT' entry '/BIC/CIWA0TRZONE_TEXT'

Hi experts,
when I import my transport request to QA, I am getting this error
"Error while creating table 'EDISEGMENT' entry '/BIC/CIWA0TRZONE_TEXT'"
the performance assistance reads as below..
Message no. EA201
Diagnosis
An attempt was made to create the entry '/BIC/CIWA0TRZONE_TEXT' in table 'EDISEGMENT'. The attempt failed.
System response
The operation was canceled.
Procedure
Please check whether the relevant entry already exists
I have an entry for '/BIC/CIWA0TRZONE_TEXT' in the table 'EDISEGMENT' do need to delete it before importing the transport. How to delete this entry, I donot see the options in SE11 /SE16..
thanks in advance
D Bret

Hi,
can you please be more precise with your enquiry?
As far as I read the note, it is quite explanatory....
What is your source system release?
You'll need to implement this prog in your source system and execute it there.
If everything works and is fine, import to program in your QA/PROD source systems and rexecute it as specified in the note...
does it answer your question
Olivier.

Error while creating table 'EDISEGMENT' entry '/BIC/CIBB0DISTR_CHAN_TEXT'

When I am activating the transfer rules of 0divison_text giving me the error
Error while creating table 'EDISEGMENT' entry '/BIC/CIBB0DISTR_CHAN_TEXT'
Message no. EA201
Diagnosis
An attempt was made to create the entry '/BIC/CIBB0DISTR_CHAN_TEXT' in table 'EDISEGMENT'. The attempt failed.
System Response
The operation was canceled.
Procedure
Please check whether the relevant entry already exists.
I have checked the note 493422 but I did not understand it can any one help me in this
I am working on 7.o with SP SAPKW70010

Hi Priya,
Delete entries for the data source in ROOSGEN, EDISEGMENT and EDSAPPL tables, both on ECC and BI sides.
Try activating the infosource again. This should solve your problem.
Sasi

Error while creating table 'EDISEGMENT' entry '/BIC/CIAC0CLASS_NUM_TEXT'

Hello,
I get the error message:
"Error while creating table 'EDISEGMENT' entry '/BIC/CIAC0CLASS_NUM_TEXT'"
when trying to activate my inactive transfer structure for 0CLASS_NUM_TEXT..
Many other transfer structures work fine, but this one is really problematic.
Has anyone seen it before? What do i do to solve it?
Regards,
F C

Hi,
Please check the note 493422. The reports listed in the note
should correct the inconsistencies and afterwards you can re-import the
request and it should then work.
Regards,
Srikanth

Error "Check Table TFBEFU_CR : entry 10 does not exist" getting

Hi All ,
While doing Goods Receipt for Prodn Order , error "Check Table TFBEFU_CR : entry 10 does not exist" getting Prompted.
Could u pls help me to solve it
Regards
Sandeep

you need to apply the OSS note 107588. it is excatly for the same problem yoy mentioned here.
check the note

Table T169P: entry 1000 does not exist

Hi,
While doing the Goods Receipt, against Purchase Order, the following error is coming:
Table T169P: entry 1000 does not exist
Please guide.
Regards,

Hi All,
Issued resolved.
Table 169P refers to Parameters, Invoice Verification. This is available under
IMG>Materials Management>Logistics Invoice Verification>Incoming Invoice>Set Check for Duplicate invoices.
Regards,

Error during Goods Receipt:Check table XMCHB: Entry 'Material no.', 'Plant

Dear All,
I am trying to post Goods Receipt for a Stock Transport Order.
The error message appears as " Check table XMCHB: entry 'material no.' 'plant', '____' , 'batch no.' does not exist. (message no. M7001)
The Supplying plant stock from which Goods Issue is done, is a Normal storage location Unrestricted stock.
The receipt has to be taken into Vendor stock (Goods Receipt movement type 101 O )
Inputs will be appreciated.

technically spoken.
table MCHB is the storage location segment of a batch record.
System tries to create an entry in MCHB without a storage location, which does not make sense.
Vendor stock does not go to MCHB, instead it is recorded in table MKOL.
If you do STOs then you may transfer vendor consignment stock, but you cannote issue own stock and receive into vendor consignment stock.

QM UD Error Message: Check table XEKBN: entry 45039875220001003 does not exist.

Hello QM expert,
I encounter a error when I make a UD. (Please refer to below screenshot. )
Case 1: I did quantity post to unrestricted use, to scrap, to blocked stock, to new material, to reserves, return delivery. When I save this UD, there is a error message 'Check table XEKBN: entry 4503987522000100310100 does not exist.' (PS. 4503987522 is PO number, but I don't know what it is about 10031010.)
Case 2: I fill the same field like Case 1, but exclude to new material. It can be passed, no error message.
Case 3: I only fill one field [to new material. It can be passed, no error message.
Could you please give me some guidance? Thank you so much.
Best Regards,
Fanchao Bu

Hi Fanchao,
Form the inspection lot number range, I believe you are using GR form Purchase Order, right? Please confirm the below points -
1. Is this a normal PO or Sub-contractor's PO? Please confirm if this issue is happening for every stock posting like Unrestricted, Scrap, Blocked...? or just for one? Can you try one by one for example, move stock form QI => Unrestricted stock only (and do not combine all types together like the attached screenshot) and suggest if that is working.
2. If this is a non-valuated material you have used (NLAG) for testing? Are you trying to post materials for previous period? Storage Location SM10 is valid?
If still this issue exist, then potentially, there is some issue with valuation variant linked to valuation area, which is normally maintained in Configuration OPK9. Paralelly, you can request your ABAP team to check FM MB_UPDATE_VALUE_ENQUEUE_TABLE, Include LMBGBU04, as suggested by the below link -
SAP ABAP Function Module MB_UPDATE_VALUE_ENQUEUE_TABLE - SAP Datasheet - The Best Run SAP Run SAPDatasheet
You can also check SAP notes below, based on the business needs:
1. 403671 - Error M7001: 'Please check table &...'
    401462 - Error M7001: 'Please check table &...'
    201833 - M7001: 'Please check table XEKPO: Entry & &...'
    2072019 - Error M7001 raised during posting goods receipt
    407265 - Transfer parameter with BAPI BAPI_GOODSMVT_CANCEL (this may be linked to your return Delivery of 1 PC...)
    439945 - GR w/ freight costs for stock transport ordr w/ML currencies
    521090 - FAQ: Stock transfer to stock transport order
    867878 - Inconsistencies in the EKBE table because of conversions
    214814 - M7001/M7361: Table T156M, entry MAA7 2
    1584493 - Overdelivery check for GR blocked stock with GR-based IV
    102863 - GI f.delivery f.a stock transfer w.delivery costs
2. 409529 - Price differences during goods receipt for purchase order
3. 1528009 - MAA: incorrect distribution of goods receipt quantities
4. 1569831 - MAA2: Composite SAP Note after Support Package SAPKH60504
5. 406973 - M7001: Please check table XEBEFU: Entry does not exist
6. 70577 - QA11: Error M7001 when posting qty in usage decision (OLD NOTE, May not be applicable)
7. 824322 - QAC1: Incorrect batch in material document (Old Note, may no be applicable)
Else, you can speak to MM team and/or FI team to help you better in this case, as I feel there is no much QM issues involved.
Thanks,
Arijit

Copy user-specific report layouts (table LTDX)

Hi,
We are implementing a "Single Sign On" solution and thus we need to
copy all the SAP users to adapt their names to "windows user names".
We copy all the user data and authorizations from SU01 but then we must
copy too all the other user-dependent things. One of them are user-
specific report layouts. We can copy the report variants because they
are not user-dependent but is there any way to copy the user-specific
layouts (table LTDX) from one user to another? Is there any transaction
or report for it?
Thanks in advance and best regards,
Jon Larrucea

Hi,
Try This Program
report copy_layout.
data : lt_ltdx like ltdx occurs 0 with header line.
data : lt_ltdxt like ltdxt occurs 0 with header line.
parameters report like ltdx-report obligatory.
parameters report2 like ltdx-report obligatory.
"copy layout of report to report2.
start-of-selection.
select * into table lt_ltdx from ltdx
                where report = report.
select * into table lt_ltdxt from ltdxt
                where report = report.
loop at lt_ltdx.
    lt_ltdx-report = report2.
    modify ltdx from lt_ltdx..
endloop.
loop at lt_ltdxt.
    lt_ltdxt-report = report2.
    modify ltdxt from lt_ltdxt..
endloop.
message 'Copy Complete.' type 'I'.

In MB1C im getting error-"Check table T004F: entry G006 does not exist"

DEAR SIR,
WHILE DOING MB1C IN MOVEMENT TYPE 561 I M GETTING THI ERROR -Check table T004F: entry G006 does not exist.
PLZ HELP ME HOW TO SOLVE THIS PROBLEM.
THXS AND REGARDS,
DEBESH TRIPATHY

Check these threads
[Check table T004f: Entry G006 Does not exist |Check table T004f: Entry G006 Does not exist]
[Posting Material |Re: Posting Material]
[Error in MBIC|Error in MBIC]
thanks
G. Lakshmipathi

Table LTDX entries

Similar Messages

Maybe you are looking for