Table Maintainace generator not showing all the fields in table
Hello,
I generate table maintainace genrator for Z-Table and also create Tranaction code for that.
I have 27 fields in my Z-table but when I run tranaction code for table maintanance generator it shows only 8 fields.
I want to show all 27 fields in my tranaction code of table maintainace generator.
How I can Achieve this?
Please Suggest.
Thanks,
Amit
Hello Ram,
Thanks for your answer.
I increases lenght of screen and table control and activate function group.
But still in program PBO of screen it showing 8 fields as follows:
CHAIN.
FIELD ZPROJ_FIN_STATS-PSPID .
FIELD ZPROJ_FIN_STATS-GJAHR .
FIELD ZPROJ_FIN_STATS-MONAT .
FIELD ZPROJ_FIN_STATS-POSID .
FIELD ZPROJ_FIN_STATS-IS_REL .
FIELD ZPROJ_FIN_STATS-IS_TECO .
FIELD ZPROJ_FIN_STATS-IS_CLSD .
FIELD ZPROJ_FIN_STATS-LEG_STATUS .
MODULE SET_UPDATE_FLAG ON CHAIN-REQUEST.
ENDCHAIN.
but Iwant total 27 field to show.
How I can achieve this?
Thanks,
Amit
Similar Messages
-
ALV not showing all the rows! Please help!
Hi Experts,
I have webdynpro ALV report and I am using SALV_WD_TABLE as the reusable component. In component controller's WDDOINIT I have written the code for pulling teh data from R/3 table and binding it to ALV table.
In the view's WDDOMODIFYVIEW event I have written the following code to get subtotal and grand total of Qty column based on product column.
I have coded like this:
lr_field_settings ?= l_value.
lr_field = lr_field_settings->get_field( 'PRODUCT' ).
lr_field->if_salv_wd_sort~set_group_aggregation_allowed( ABAP_TRUE ).
lr_field->if_salv_wd_sort~create_sort_rule( ).
l_sortrule = lr_field->if_salv_wd_sort~GET_SORT_RULE( ).
l_sortrule->set_sort_order( if_salv_wd_c_sort=>sort_order_ascending ).
l_sortrule->set_group_aggregation( ABAP_TRUE ).
*...Aggregate Field PRODUCT
lr_field = lr_field_settings->get_field( 'QTY' ).
lr_field->if_salv_wd_aggr~create_aggr_rule( ).
lr_aggr_rule = lr_field->if_salv_wd_aggr~get_aggr_rule( ).
lr_aggr_rule->set_aggregation_type( if_salv_wd_c_aggregation=>aggrtype_total ).
It is working now but my ALV table is not showing all the rows. I have 6 products and it is showing from product 2. But it is calculating grand total and subtotal correctly. I am not able to see the first product row and subtotal for that. Even if I click on the ^ icon in the ALV table below it is not showing all the rows.
What could be the problem?
Please help
Thanks
Gopaldid you somehow manage to set the "first visible row" property on table object
to 2. Only thing I can think of that could cause this effect.
Cheers
Phil -
Vertical scrollbar not showing all the records when I scroll down.
Vertical scrollbar not showing all the records when I scroll down.
Using Oracle forms 10g , operating system windows
I have two fields with number of items dispayed = 15.
I have a vertical scroll bar with them. There are 34 records in the table but the scrollbar only shows 15 records.
Here are the properties for block / scrollbar.
WORK_CATEGORY
- Subclass Information
- Comments
* Navigation Style Same Record
- Previous Navigation Data Block
- Next Navigation Data Block
- Current Record Visual Attribute Group
- Query Array Size 0
- Number of Records Buffered 0
* Number of Records Displayed 60
* Query All Records No
- Record Orientation Vertical
* Single Record No
- Database Data Block Yes
- Enforce Primary Key No
- Query Allowed Yes
- Query Data Source Type Table
* Query Data Source Name WORK_CATEGORY
* Query Data Source Columns
* Column Name JOB_TYPE
* Column Type VARCHAR2
- Column Type Name
- Parent Column
* Length 30
* Precision 0
* Scale 0
* Mandatory Yes
* Column Name WORK_CATEGORY
* Column Type VARCHAR2
- Column Type Name
- Parent Column
* Length 30
* Precision 0
* Scale 0
* Mandatory Yes
- Query Data Source Arguments
- Alias
- Include REF Item No
* WHERE Clause
* ORDER BY Clause job_type
- Optimizer Hint
- Insert Allowed Yes
- Update Allowed Yes
- Locking Mode Automatic
- Delete Allowed Yes
- Key Mode Automatic
- Update Changed Columns Only No
- Enforce Column Security No
- Maximum Query Time 0
* Maximum Records Fetched 0
- DML Data Target Type Table
- DML Data Target Name
- Insert Procedure Name
- Insert Procedure Result Set Columns
- Insert Procedure Arguments
- Update Procedure Name
- Update Procedure Result Set Columns
- Update Procedure Arguments
Don't know where am I going wrong. I'll really appreciate if you can help me in this.
Thanks.
Edited by: 831050 on Sep 14, 2011 8:05 AMOne of the items is a list item.. here are it's properties:
* Name JOB_TYPE
* Item Type List Item
- Subclass Information
- Comments
- Help Book Topic
- Enabled Yes
* Elements in List
* Label
* List Item Value LIST20
* List Style Combo Box
- Mapping of Other Values
- Implementation Class
- Case Restriction Mixed
- Popup Menu
- Keyboard Navigable Yes
- Mouse Navigate Yes
- Previous Navigation Item
- Next Navigation Item
- Data Type Char
- Data Length Semantics Null
- Maximum Length 30
- Initial Value
* Required Yes
* Copy Value from Item
- Synchronize with Item
- Calculation Mode None
- Formula
- Summary Function None
- Summarized Block
- Summarized Item
- Current Record Visual Attribute Group
- Distance Between Records 0
* Number of Items Displayed 15
- Database Item Yes
* Column Name JOB_TYPE
- Primary Key No
- Query Only No
- Query Allowed Yes
- Insert Allowed Yes
- Update Allowed Yes
- Update Only if NULL No
- Visible Yes
* Canvas CANVAS2
- Tab Page
* X Position 47
* Y Position 137
* Width 187
* Height 18
- Visual Attribute Group DEFAULT
- Prompt Visual Attribute Group DEFAULT
- Foreground Color
* Background Color white
- Fill Pattern
- Font
* Font Name Tahoma
* Font Size 10
* Font Weight Demilight
* Font Style Plain
* Font Spacing Normal
* Prompt Job Type
- Prompt Display Style First Record
* Prompt Justification Start
* Prompt Attachment Edge Top
- Prompt Alignment Start
* Prompt Attachment Offset 10
* Prompt Alignment Offset 0
- Prompt Reading Order Default
- Prompt Foreground Color
- Prompt Font
* Prompt Font Name Tahoma
* Prompt Font Size 10
* Prompt Font Weight Bold
* Prompt Font Style Plain
* Prompt Font Spacing Normal
- Hint
- Display Hint Automatically No
- Tooltip
- Tooltip Visual Attribute Group
- Direction Default
- Initial Keyboard State Default
- Keyboard State Any
-
ABAP query output not showing all output fields
I added a new field group in an existing query and marked them to display in the output list. When I test the output from SQ01 -> InfoSer Query, the output is what I expect. However, if I execute the query itself, it does not show the additional fields I just created.
I notice that in the Basic List layout design, the new fields are on a new line and not appended to the same line as the output fields before I did the modifications. I already tried to manipulate the output length and positions, but it didn't help. I turned on the ruler to drag the fields in the desired positions, sometimes it works but not for all the fields. Can someone help me please?I figured it out already. The maximum width for the report output is 255 only. Switching from graphical query painter, I got the error that some fields were overlapping. Then I recalculated the starting positions of the fields and adjusted their lengths.
-
I recently updated my e-mail address with apple, but now it does not show all the "purchased" music that I purchased under my old e-mail address. How can I re-gain access to those hundreds of purchased songs?
You are trying to find a loophole to circumvent a basic rule that prohibits the transfer of purchased content from one Apple ID to another.
Content tied to an Apple ID are bound to that Apple ID forever. You can not merge or trade accounts. Well, not (officially) anyway... -
BI publisher report is not showing all the data
Hi All,
I have created a report using BI Publisher in R12. The report is not showing all the records.
I have checked the result XML it is also not having all the data. My query returns 846 rows but my report only has 662 rows.
what might be the issue.please give me some idea to resolve this issue.
Thanks in advance.
Regards,
P.KalidossHi Arun,
In the following code: public SelectItem[] getAllPrinters() {
if (allPrinters == null) { // allPrinters is not defined. what type of object it is
PrintService[] printers = PrintServiceLookup.lookupPrintServices(null, null);
allPrinters = new SelectItem[printers.length];
for (int i = 0; i < printers.length; i++) {
SelectItem printer =
new SelectItem(printers.getName(), printers[i].getName());
allPrinters[i] = printer;
return allPrinters;;;
Variable allPrinters is not defined. what type of object it is?
And also the same variable is referenced here <af:selectOneChoice label="Available Printers" partialTriggers="cb1"
value="#{pageFlowScope.applicationPrinterBean.selectedPrinter}"
id="soc1"
autoSubmit="true">
<f:selectItems value="#{pageFlowScope.applicationPrinterBean.allPrinters}" id="si1"/>
</af:selectOneChoice>.
Thanks. -
In solution manager system not showing all the system in SLD
Dear Gurus,
During the installation of solution manger sysyem i selected as a Central SLD as solution manager
Later installed ECC 6.0 and EP systems selected SLD as solution manager system during the instllation.
If i login in to http://hostname:50000/sld (solution manger system) and the screen also not showing all the options also. some options missing in the tab. Wat I need to do to see all the options clearly.
It is not showing all the systems if i check in EP and ECC for SLDCHECK it is not givng any errror.
But if i login into solution manger not able to see all the system in SLD.
RegardsThanks for reply
it is not showing all the systems -
Hi All,
I am using SCOM 2007 R2 CU4 in my environment. I want to do a service monitoring on specific agents. When i try creating this service monitor which comes under the Management pack template when i select the service which i want to monitor it does not
show all the services in the drop down.
For example - I have Windows audio service which is present on the machine, But it is not showing in the service list.
So from the services stating from "W" i see only 5 in SCOM and in services.msc in the Agent i see more than 5.
Below is the screen shot.
Can any one please help.
Gautam.75801Hi Yan Li,
So based on your above suggestion, If the services are already managed / monitored by a specific
management pack those services will not appear here in the Wizard while creating this type of a Management pack object alert right ?
If that is the case why does not the same reflect here in the operations console in the Services monitor
TAB ?
Gautam.75801 -
Apple mail not showing all the messages?
In Apple mail, for my icloud account, I have some mailboxes which show the wrong number of messages, it shows too few.
As an example, a mailbox contains 150 messages, but apple mail reports there are only 146.
I rebuilt the mailbox and let apple mail do its thing. In the activity window I can see there are 150 messages. Yet, once apple mail has finished rebuilding the mailbox, it still tells me there are 146 messages. What's going wrong? Why would apple mail not show all the messages while in the activity window it clearly shows it knows there are 150?Solved!
This was too weird to be real. Apple mail does not show messages it believes to be duplicates, and buy, does it make big mistakes in deciding what are duplicate messages and what not! Some of my mailboxes had over 100 "duplicates" not showing according to apple mail.
I found a solution thanks to this topic:
https://discussions.apple.com/message/18265121#18265121
defaults delete com.apple.mail AlwaysShowDuplicates
does yield an error in 10.8.2 ( Domain (com.apple.mail) not found. Defaults have not been changed. )
defaults write com.apple.mail AlwaysShowDuplicates -bool true
Does work brilliantly though! -
Process Chain got struck and not showing all the variants in the log view
Hi,
We have some process chains which are running daily.The problem here is that one of the process chains got struck at some point
and it is not showing all the variants in the log view but able to see in planning view.
Could any one please let me know why this is occuring.Hi Ramanjaneyulu,
Thanks for the reply.
As you said,i clicked on the 'display message' but it is not showing any errors.It is showing
that the process completed successfully.
Thanks. -
The library module in 4.3 version does not show all the images
The library module in the version 4.3 of Lightroom does not show all the images. They are marked with gray boxes instead of images. This is especially true of the images which I tried to import to Lightroom since I downloaded 4.3 a few weeks ago. If I want to seen an image, I have to go to the develop module to see it. What should I do? Get this fixed now!!!!!!!!
My bet would be on a corrupt preview folder.
Your preview folder is located in the same folder as your catalog. It has the same name as your catalog with the word Previews.LRDATA at the end of the name. Rename this folder and let Lightroom rebuild the previews. Go to Library>Previews>Render Standard-sized Previews. See if that fixes it.
If it doesn't, you may want to have a look here: http://helpx.adobe.com/lightroom/kb/photos-appear-black-gray-rectangles.html -
Music on my phone does not show all the iTunes artwork, even after doing a backup restore, eliminating all music and restoring I have an iphone5 64 syncing about 8000 songs, so updating all is a time consuming, and now maddening process. Never had a problem before iOS 8. Someone (hello Apple) needs to develop a utility to help manage artwork recovery.
See earlier post by tt2
https://discussions.apple.com/message/7217190#7217190 -
BP interaction history does not show all the activities in portal
Hi Experts,
We have a problem in application CRMM_ACCOUNT when we go to BP interaction history does not show all the activities in portal as it is thr in activities screen.
Regards,
MarkHi Glenn Michaels,
Thanks for your response , If I look at the activities tab there were more activities than on the interaction history tab .
In allowed channels for transaction type we have 3 channels.
Can you guide me what to do next?
Regards,
Mark -
HT1351 My ipod Classic is not showing all the music from iCloud.
My ipod Classic is not showing all the music from iCloud. I have "show music" enabled.
Glad 7.7.1 worked for you, I updated itunes on my macbook, and every time i try to sync the music to my ipod classic, it goes for 23 songs and then it freezes and I get "Cannot read or write to this disk", and it ejects it. I tried uninstalling itunes, reinstalling an earlier version (7.6.2) same problem, plus a new issue with itunes. (It was a clean uninstall, btw, I got everything cleaned out, I think, lol). Video's transfer fine. And no good way to get ahold of apple. That's great. If I have no music on my ipod, it's useless. Think they'll give me my money back? (lol)
-
Not getting all the fields of MARA by using DDIF_NAMETAB_GET
Hi,
Please to solve the below issue.
I am using the DDIF_NAMETAB_GET FM and trying to all the fields of MARA tabel but i getting only 27 records ie. 27 fields. when i look at DD03L i can 220 records but i am not sure why the output only shows 27records.
Any help is really appreciated.HI,
Chek cthis ..
Function module DDIF_NAMETAB_GET
Import parameters Value
TABNAME MARA
ALL_TYPES
LFIELDNAME
GROUP_NAMES X
UCLEN 00
Export parameters Value
X030L_WA MARA
DTELINFO_WA 00000000000000000000000000000000
TTYPINFO_WA 00000000000000000000000000000000
DDOBJTYPE TRANSP
DFIES_WA 0000000000
LINES_DESCR 22 Entries
Tables Value
X031L_TAB 0 Entries
Result: 231 Entries
DFIES_TAB 0 Entries
Result: 230 Entries
Maybe you are looking for
-
ok i have a field called Country and a field called city. I have a function that calculates the total Population of the country based on the number of people in each city. But for the sake of testing the function i made country = America. But there a
-
Filed disabled in receiver agreement
Hi all, When I configure In ID part, swcv of Receiver Interface filed in receiver agreement is disabled. But earlier its working. PFA the screenshot. Please suggest !! Thanks, Arthita
-
Hi, I have a client table with following description CLIENT_ID NUMBER(10) FIRST_NAME VARCHAR2(10) LAST_NAME VARCHAR2(20) I have client.dat file as 2001, Joe, Soap 2002, Jim, Bloggs 2003, Jimmy, Bean I have SQL Loader control file client.ctl as LOAD D
-
Active SQL Window Truncates SQL
My active SQL window is truncating the statement being returned from the sql area. Its also not formatted, is there any way to control this? Thanks in advance...
-
Regarding Newly created Business Service ?
Hi @, In my scenarion I have created one New Business Service which is web service and it will be used in sync manner.while creating the Business Service there are two tabs Sender and Receiver which conatins the interface names .My doubt is as the we