Table Maintaince ..issue to see all fields at once ??

Dear All,
I am working on a table maintaince. The problem I am facing is that, I have about 10 fields, I am unable to see all of them. I have to scroll left and right to see all fields.
Is there any setting to see all at once.
Thank you.
Regards
Madhu.
Edited by: Alvaro Tejada Galindo on Mar 27, 2008 1:04 PM

When you save a table a report is created behind it.
Plz goto SE80 give your table name and find that system created report name.
Now goto SE51 ->give the program name and go the layout.
Here you can change the table size , save activate.
Now is the time to check in SM30 for table maintanace. You might see a different size.
I hope it helps.
thanks,

Similar Messages

Issue in See All options in Outlook Web Access (Exchange 2010)

Dear Exchange Admins,
In our Exchange email environment, the users are able to login OWA. but the users as well as all admins (Exchange and AD admin) are not able see all options through OWA. All are getting the message "
Sorry! Access denied
You don't have permission to open this page. If you're a new user or were recently assigned credentials, please wait 15 minutes and try again.
© 2010 Microsoft Corporation. All rights reserved.
Kindly help.Please
Ashraf

Hi Ashraf,
According to your description, I suggest you check the
RoleAssignmentPolicy property of user. If the RoleAssignmentPolicy property is empty, this error can be caused.
Run the following command to view the RoleAssignmentPolicy property:
Get-Mailbox <identity> | fl Name,RoleAssignmentPolicy
If you have any update, please post back.
Best regards,
Eric

SQVI - Not able to see all fields in a table.

Hello all,
I was not able to add few fields in a table into my report as I am not able to see those table fields in SQVI. For example T508A-RTEXT. Please let me know.

Hi,
As Tamas suggested, field RTEXT is actually a filed in text table T508S. You would have to join table T508S in your query.
For more info on text-tables, please look the below link:
[Text Tables|http://help.sap.com/saphelp_smehp1/helpdata/en/cf/21ea9e446011d189700000e8322d00/content.htm]
Thanks.
Ravi

JSF Table StyleClass issue for a specific Field inside the Table

Hi There,
Am having an issue of dynamically setting the styleClass for a specific field inside a DataTable. Here is how the JSF code is ..
<h:column>
<h:panelGrid id="column4" columns="1" cellpadding="0" cellspacing="0">
<h:inputText id="numberOfApps" value="#{row.submitNumber}" styleClass="#{row.customStyleClass}" maxlength="6" converter="MyNumberConverter" />
</h:panelGrid>
</h:column>
This Table has a specific column which has a input Text Box where user enter's data. This data will be validated in the bean where in after the validation if its exceeding a limit we should throw an error message and also highlight the field with a specific styleClass.
I am setting the StyleClass dynamically based on the User Input, so that I can display a highlited Error Field on the screen. Strangely enough, styleclass is getting set as expected for the first submit but doesnt show any styles for further submits. Even the existing style is getting removed from the second submit onwards. I am setting this "customStleClass" dynamic parameter as a Bean Property. Am sure these values are properly set coz to make sure I have put an h:output tag inside that table to display the customStyleClass values and they are getting set as expected but I see blank value for the class="" in the source of the Page.
Any help would be appreciated.
Thanks
Edited by: Lalith on Jan 14, 2008 10:23 AM

One option is you find the data element of that field GUID.
Now go to SE11 transaction and in data type put that data element and press where used list. In that select tables.
This will give you a list of tables where that field is used.
But again if there are lots of them it will be difficult to find.
The only option in that case is debug the extractor and find out.

Data should get inserted in all tables if i enter the form field only once

Hi, I have a new question again.
There are 5 tables in a database, that is t1, t2, t3, t4 & t5. the first 4 table has one common column, known as lc_no. I have build the form using the form builder. In that form, there is a 1 text field for lc_no. I have not started to code anything as yet in the form because everything with respect to it is working fine and even the data is getting inserted. But the problem is that, when i enter the data in the form, the lc_no gets loaded in only one table. I want the data to get inserted in all the tables. What should i code? How should i start off? I'm very new to this & don't exactly know how do i start with it ?
Thank You. Can you help as i have not yet started to code in this form.
Oracle9i Enterprise Edition Release 9.2.0.1.0.
oracle forms 6i.

Let us say table one have lc_no, other columen
Table 2 have LC-no , other columsn
Table 3 have lc-no , other column,
Now in form(which has table1 as base table)
In PRe-Insert write like below
Insert into table2 (lc_no) values (:table1.lc_no) here tabel1 should be block name in form.
Insert into table3 (lc_no) values (:table1.lc_no)
................and so on .. to other table.
So, now when user commits the form, the lc_no will be available in all the other tables..

Lync 2013 mobile client can't see all fields in contact card

We have deployed Lync 2013 infra in our organization, now we observed, mobile Lync client users are not able to see other users mobile number on contact card rest all information is visible.
Is there any workaround or fix to resolve this issue. Appreciate quick help.

That's effectively by design (but a popular complaint). The workaround is to put the users who's mobile numbers you need in your Outlook contact list. There's another workaround related to setting the privacy relationship, but you have to coordinate
it with many people which is not too feasible.
Here are others upset about it:
http://ammarhasayen.com/2013/09/25/lync-2013-mobile-contact-card-not-showing-mobile-number/
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications

How to see SD Tables, I want to see all Tables?

Hi,
How to see te SD,MM tables in datadictionory.
I wnat the steps.
Thanks,
Ravi.K

Check out these links
http://www.allsaplinks.com/tables.html
http://www.erpgenie.com/abap/tables.html
Regards,
Santosh

2 drives...how do I see all photos at once from both on one library page?

I have 2 internal drives. I ran out of room on my primary internal drive, and put new photographs (and moved a few more) for the same project on the secondary drive.
I could not choose to browse the second drive for lightroom unless I made the second drive a distinct catalogue (I am sure this is a mistake on my part).
My questions are:
1) how do I see the second drive on the left side panel without having to log out of lightroom and log back in
2) Can I have photos from one project spread over two drives, yet see them all at the same time in the library mode?
3) when I moved photos to the secondary drive, i lost all the metadata. I did not see a choice to export the key words attached to each photo. What did I do wrong?
Thank you,
Allan

1) and 3) It all depends how the pictures are and were organized. The optimum would be if the pictures you moved were in just one folder with subfolders. Then all you have to do is point LR to the new topfolder and it should find the rest.
If this is not the case you will have to point LR to all the folders you moved. If you split your folders then it's a matter of pointing LR to each picture. At this point maybe you could consider moving the pictures back and make a new try.
/John

How can I see all scheduled jobs which have steps of a given user?

Hello,
I like to see all scheduled jobs which have steps of a given user. It is not importent which user has planned the job, I just want to check the usernames wich are used for accomplishing the respective step (-> field "AUTHCKNAM").
In table " tbtcp" I can see the AUTHCKNAM for the jobsteps, but these table just contains the jobs which are in the state "finished/completed".
In table "tbtcs" I can see the scheduled jobs, but there I can't see the AUTHCKNAM
Do you know a table where I can see ALL Jobs or the scheduled ones and the AUTHCKNAM?
Thanks for your help!
Kind Regards
Lisa

Hi,
thanks for your answers.
I also tried the table "tbtco". There I can see all jobs, but there arent entrys in the column "AUTHCKNAM". Its empty....
Maybe there is an other table?
Kind Regards,
Lisa

Getting all fields that have been changed.

hello there,
how can i get the name of the fields that have been changed, their value pre-change and their values post-change on specific a block?
The reason for this is, i have a new requirement for an existing form. The supervisor wants to see all fields and their respective values that
a regular user changes so he can approve the change.
thanks so much in advance.
gleisson silva

Write Databse trigger on base table
CREATE OR REPLACE TRIGGER
FOR EACH ROW
:NEW AS NEW
:OLD AS OLD
ON UPDATE OF column1...
BEGIN
INSERT INTO DUMMY VALUES(:column_name,:new_value,:old_value);
END;
row-level trigger with update option.
store Old values and new values in dummy table which is replicated to original table.

How to see what Tables are being used in all reports

Post Author: tmashley
CA Forum: Crystal Reports
Hello,
How can I see what database tables are used in all my online reports? I have around 1000 reports posted to Enterprise over 6 different datasources. If possible I would like to see the fields within those tables that are being used to.
I am using Crystal Reports XI Release 2
Any help is appreciated
Thanks,
Tom

I don't think you can see the databases of the reports unless you download the report onto your pc as a Crystal Report format and then open it under Crystal Reports.
This way it will open the report within Crystal Reports and will show you the datasource it is coming from.
I doubt if you can see them online.
Kind Regards
Jehanzeb

Can we see all the Technical names and field/common names in one screen

Hi SAP Gurus,
Can any one plz. clearify the querry of 'all the technical names, field names, common names, table names in one screen? if so, how?
Thanks inadvance
Regards
Namrata

Hi,
For a particular screen,if u want to see all the technical data,
Go to system->status->screen->double click on the screen->flow logic.
Regards,
Manoj.

Applying support packs, is there way to see all tables/view/clustered table

We are applying support packs, and they are taking awhile. Upon review it looks like it's adding some fields to some tables/clustered tables. Is there a way to see all the tables/views/cluster tables that were updated. I know I can look at version management, but if somebody can point me to the base tables to look at and I can do an sql to sort them for what I am looking for. I want to make the changes to the update tables ahead of time by adding the column at the end, so there's no need for a conversion.

you can find all the changes in Transport requests logs as below ;
PATH -> SAP******* -> you get package,general text,documentation,table,tabclecontents,porgram,view etc..
Plesae let me know if you have any questions?
regards
nag

Not seeing all DB tables in Crystal using ODBC connection

I have an ODBC connection to an oracle database. I can connect to the database and see all the tables through tools such as TOAD, SQL developer, SQLPlus, etc. However, in Crystal, i only see schema tables and not the tables I want. I am using the same connection, username, and password. If I run a report that was created in a different environment to the correct tables, I receive the error: ORA00942: table or view does not exist.
Oracle 10g
Crystal 12.0.0.683
Any suggestions?
Thanks,
Diana Woronuk

Hi Diana,
Go to File | Options and open the Database tab.
Make sure Tables and Views are checked. You may want to include Stored Procedures too.
Save the changes and restart Crystal.
You should see your tables now. If you have more than 200 objects in your database, you may need to use the Table Name Like option to filter out some of the tables.
Good luck,
Brian

Issue with DEBMAS IDoc,not all fields are reflected in the IDoc Seg E1KNB1M

For IDoc type DEBMAS, there is a segment E1KNB1M. This segment is relate to the customer correspondence details (XD02 -> company code data -> Correspondence).
For any change to the customer master a DEBMAS IDoc is triggered which has data in segments including the E1KNB1M.
In my case for few customers, the not all fields in the segment E1KNB1M contain data. Few fields contain data but the rest are filled with u2018\u2019. This is happening only in the production system, for the same customer in the quality system the data is there as required.
I checked in debugging, and found that the data is correctly passed to the segment in program SAPLVV01 Include LVV01F01. And the segment contains data till the IDoc is triggered. I.e. the fields are not getting cleared at any point.
Can anyone suggest what is happening and how to fix this? Please note that the issue is only in the production system and not in the quality system ( for the same customer).

BTT... Need some help on the above

Table Maintaince ..issue to see all fields at once ??

Similar Messages

Maybe you are looking for