Table maintance genrator in sm30
hi ,
i had created table called zppecn .... there are 10 field are there and i had genrated table maintance ..
it was working fine in sm30....feild descrption is come correct...
then user wants onther five field i added in it.. and again genrated table maintance... the field descrption is not coming....
NOTE: OTHER 5 FIELDS NOT HAVING DATA ELEMENTS .. ONLY THAT FIELDS DESCRPTION IS NOT COMING ....ITS SHOWING '+' ....
PLEASE GUIDE ME PROPERLY..
hello,
One good thing u can do is GOTO SE80 the function group in whihc u have stored your table maintenance ...... DISPLAY the FG and the open the screen of the table maintenance GOTO to its LAYOUT and then GOTO EDIT mode click on the filed Title and Edit its label to wat ever you want and then save n activate the FG and screen also......
but a disadvantage of this is that this will go once u regenerate ...... so if u regenerate then u need to again do these steps again t get the label
i hope this was very helpful to get a different view of customizing the table main......
please close the post once u get the solution
Similar Messages
-
Function module which sort the entries in Table maintance generator
hi
I want to know the function module which is used to sort the entirs in table maintance genrator.
ThanksHi,
Go to the TMG program .You can change the code there.
Rgds,
Anversha -
Unable to create table maintance generator
Hi all,
I created z table and trying to generate table maintance but it is giving below error.
The maintenance object description has no transportable package
Message no. SV415
Diagnosis
You want to generate the maintenance modules for object ZFI10. The correction system is not active for the package $TMP, to which the corresponding maintenance object description is assigned. The function group assigned for the generation has a package which can be corrected.
System response
The generation is not performed.
Procedure
Either assign the maintenance object description for object ZFI10 to a correctable package, or assign the table for the generation of the maintenance module to a function group with non-correctable packages.
please suggest me how to assign correctable package.
Regards,
Ramprasadgo to se11 utilities
->table Maintaince Genrater
give your function Group name or make new Function group
give maintaince screen one or two
after that click on create
the check it on table contents and create Entries .
or u can check in se80
gice your function group name and check the screen or u can change heding of the field title from here -
Uploading data through Table Maintance Generator
hi Folks,
I have created three Custom tables in Solution Manager. i need to create multiple entries for the tables. but i am very new to table maintanance generator. could any one tel me the step by step procedure (Like what to give for authorization grp and Function grp) to accomplish the task. thnx in advance.
santosh....Hi,
Table maintanance Generator is used to manually
input values using transaction sm30.The Table Maintenance Generator is used to create table maintenance program to add, modify or delete records in the database table. This can be accessed using transaction SE54 or in SE11 using the menu Utilities->Table Maintenance Generator
follow below steps
go to se11 check table maintanance check box under
attributes tab
utilities-table maintanance Generator->
create function group and assign it under
function group input box.
also assign authorization group default &NC& .
select standard recording routine radio in table
table mainitainence generator to move table
contents to quality and production by assigning
it to request.
select maintaience type as single step.
maintainence screen as system generated numbers
this dialog box appears when you click on create
button
save and activate table
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ed2d446011d189700000e8322d00/content.htm
One step, two step in Table Maintenance Generator
Single step: Only overview screen is created i.e. the Table Maintenance Program will have only one screen where you can add, delete or edit records.
Two step: Two screens namely the overview screen and Single screen are created. The user can see the key fields in the first screen and can further go on to edit further details.
please check the link for getting information about table maintenance generator !
https://www.sdn.sap.com/irj/sdn/advancedsearch?query=use%20of%20table%20maintenance%20generator&cat=sdn_all
http://www.sapdevelopment.co.uk/tips/tips_tabmaint_tcode.htm
http://www.sap-img.com/abap/create-a-table-maintance-program-for-a-z-table.htm
Regards,
Priyanka. -
About Table Maintance for An Table
Hi All
i would like create Table maintance for an table.kindly explain me how to create table maintance for an table...and what is the actual purpose of table maintance..
Thanks in advance.Hi Joe,
Table maintanance Generator is used to manually
input values using transaction sm30
follow below steps
1) go to se11 check table maintanance check box under
attributes tab
2) utilities-table maintanance Generator->
create function group and assign it under
function group input box.
also assign authorization group default &NC& .
3)
select standard recording routine radio in table
table mainitainence generator to move table
contents to quality and production by assigning
it to request.
4) select maintaience type as single step.
5) maintainence screen as system generated numbers
this dialog box appears when you click on create
button
6) save and activate table
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ed2d446011d189700000e8322d00/content.htm
http://help.sap.com/saphelp_46c/helpdata/en/a7/5133ac407a11d1893b0000e8323c4f/frameset.htm
/message/2831202#2831202 [original link is broken]
One step, two step in Table Maintenance Generator
Single step: Only overview screen is created i.e. the Table Maintenance Program will have only one screen where you can add, delete or edit records.
Two step: Two screens namely the overview screen and Single screen are created. The user can see the key fields in the first screen and can further go on to edit further details.
Plzz reward if it is useful,
Mahi. -
Regarding table maintance generator
hi experts,
when ever i use sm30 for the particular table for feeding the data it si showing this error:::: The maintenance dialog for YHREMPSUBGRP is incomplete or not defined..what is the reason behind this as i already activated the function group zsap_hr_incv which i m using in the table maintance generator for the table yhrempsubgrp.,,plz help me.Hi Ravi,
Did you finished, the following steps? Please check again.
go to se11 check table maintanance check box under
attributes tab
utilities-table maintanance Generator->
create function group and assign it under
function group input box.
also assign authorization group default &NC& .
select standard recording routine radio in table
table mainitainence generator to move table
contents to quality and production by assigning
it to request.
select maintaience type as single step.
maintainence screen as system generated numbers
this dialog box appears when you click on create
button
save and activate table
Thanks, -
Reg:table maintance generator
hi,
i have one z table with 5 fields now i added another one field .
in sm30 previouly showing in header 5 fields description , but now why the new field description is not visible why???
i think it should automatically added ...
please help me regarding this issue.
thankshi,
for ur answer.
but i change again but no..the description (valution class) is not coming .
i just entered the bslnr field as standard into my z table.
but why its not displaying in my table maintance generator screen as a header..
any process is there??
please let me know. -
Unable to edit validated field in table maintance
Hi all,
my requirement is to show an warning message on non key field if validation is not correct and edit on the same screen.
solution: I have created an event new-entry in table maintance and tried to validate that field field (email)
form new_entry.
if table-email na '@'.
message w001(incorrect email id)
endif.
enfdform.
- In this way it show the warning correctly but i am not able to edit that email field on the same screen.
do i need to validate in chain endchain. If yes how ??
Can anyone suggest the solution with demo code .
Thanks,
AishaSimple set sy-subrc some value after message statement and change message type as 'S' like below.
FORM new_entry.
IF table-email NA '@'.
MESSAGE s001(incorrect email id). " Message type 'S' to stay in same screen
sy-subrc = 1. " Set some value other than zero to abort saving
ENDIF.
ENDFORM. "new_entry -
How to change width of table maintenance screen in sm30
Hi,
I want to change the width of table maintenance screen in sm30 of a view. I am trying to change it through screen painter.
But its giving me error - screen or window limit reached. I want to increase the widht to show all the fields at once.
Is there any way for this?
Also, earlier in table maintenance generator of view, there was one step selected. I changed it to two steps and re-generated the TMG. But again Its showing only one screen in sm30.
Kindly tell me which step I have missed out.
Regards,
Seema NahariaI guess the links below should help in your problem ..
http://www.saptechies.com/how-to-create-table-maintenance-generator/
Window size on SM30
If these do not please tell ..
Regards,
Manthan -
Add a new record in database table without using table maintance generator
Hi Expart ,
Plz. tell me how to add new record in database table without using table maintance ganerator ....give me one ex.
Regards
BhabaniHi,
The other way to safely handle the modification of tables is through is by programs that can be done with SE38 or SE80.
To insert into database table we use INSERT statement :
1. To insert a single line into a database table, use the following:
INSERT INTO <target> VALUES <wa>.
INSERT <target> FROM <wa>.
2. To insert a several lines into a database table, use the following:
INSERT <target> FROM TABLE <itaba>.
Or even we can use MODIFY statementas this single statement is used to insert as well as update the records of database table.
MODIFY <target> FROM <wa>.
or MODIFY <target> FROM TABLE <itab>.
thanx.
Edited by: Dhanashri Pawar on Sep 10, 2008 12:25 PM
Edited by: Dhanashri Pawar on Sep 10, 2008 12:30 PM -
How to use table maintance generator
Hi Friends,
I wanted to add more data in predefined table. For that table maintance is allowed with restriction. So anybody will tell me how to proceed for adding more data in table.
Regards,
SalilHi Ajay,
Thanks for ur valuable reply. But i m unable to make entry by both ways. Suppose i m going through se11. How i can judge authorization group & function group.
I m using crm table. I dont know the authorization group for that table as well as function group. May i choose any thing by F4 & then create entries???
Regards,
Salil -
Table maintance generator data transport
Hi expart
I am createing table maintance genarator . i am create entry in table maintance . all data save in table maintance . so i m transport Tablemaintance with data form DEV server to QAS server . Is it possible or n't so it is possible then tell me what is process to transport table maintance with data .Hi,
Go SE56-> give table name
Go to Env->Maint.object-> Here you`ll see the Object attributes
it should be Category = CUST
Trasport = "Automatic trasport "
Adjustmnet = automatic adjustmnet
Client-specfic = 'X'
Regards
Kiran Sure -
Table Maintance for fields having length 3000
Hi,
How to create Table Maintance generator for Table fields having length 3000, expecting quick reply
Thanks in advance,
Srinivas MHi
In that Tcode
Slection date: It is only on e field.(BUDAT).
This field declared using select options satement internally.
U should give range of dates.
If it is helpful rewards points.
Regards
Pratap.M -
Reg : Tcode for table maintance generator
Hello,
I have created the Tcode for Table maintance generator of a table using SE93 which directly goes to the table maintaince generator. My requirement is if i open the tcode i need to display the custom selection screen before going to the table maintaince generator. How do i do it. please can give me the steps to fulfil the above req.
regards
harithaCheck below thread will be useful to you.
Re: Sending Payment Advice as Email to Vendors
For more information:
Search sdn with key words tcode + table maintainence generator
Regards -
Hello friends,
What is the use of Table Maintence Genarator,
where will it will useful in which process.
Thank You,
santhosh
Search for the answer in the Forums and Read the SAP help documentation.hi,
SEARCH in SCN with Table Maintence Genrator you will get lot of posts.
Maybe you are looking for
-
Help: grey screen with progress bar at startup, no success repairing in disk utility
I got my MacBook pro in December 2011 and never had an issue with it until this same thing happened in February 2013. Basically, what happens is the computer starts to run really slowly, so I forced shut down. When I tried to power it back on, I can'
-
Is there a low quality photo warning in books in iPhoto'11?
One of the pics in my book is filling a page, and looks pretty blurry and I'm almost positive that it is too low resolution for this size, but there is no warning icon telling me there is a problem. It seemed like my warnings were not working, so I p
-
Critical Keynote widget bug on iBooks Author 2.2
Hello, I think I found a bug on ibooks Author 2.2. If a Keynote widget is added to a .iba document created on IBA 2.2, it cannot be previewed in iBooks 3.2 for iOS 7 or iBooks 1.0.1 for OSX Mavericks. The widget only works when viewed on iOS 8 or OS
-
What the hell good is Flash?!
I mean really? After taking time on a few different occassions to try and google and find what I can do w/ flash on Android 2.2 and finding nothing I have to ask myself this. I know it's not their fault that Hulu and Netflix want to be #$#$@s and blo
-
Add url parameter in navigation-case
Hi All, We need to add a param to the URL when doing navigation, the param value is come from a session bean. I tried following, but not working, the param showed in URL is just what I typed in the <to-view-id>, i.e. not runtime replaced by the sessi