Table maintenance generator with radiobuttons

Hello,
how can I automatically (via se11: table maintenance generator) generate from a DDIC-structure the radiobtton-fields on a dynpro?
If I use the domaine 'X' or 'XFELD', I only get checkboxes....
kind regards

Hi,
Table Maintenance Generator will create the Z Screens.
In order modify those Z screens go to SE80 and give the
Function group for that table maintenance generator.
Then to find the function group go to sm30, give the table name and click on display. It show a screen with table control. Click on System -> Status .
It gives you the Z screen information.
Give that Z screen in SE80 and do the changes accordingly.
I hope it helps you.
Regards,
Gopi

Similar Messages

Include a field in the table maintenance generator

Hi All,
There is a Z table with MATNR and another numeric field and the table maintenance generator exists for the table. The requirement is to include another field for MAKTX ( Material description) in the table maintenance generator with input disabled. Is it possible to do the same in the table maintenance generator else please suggest me the best solution.
Thanks in Advance.

Hi Srinivasa,
This is quite simple, first add the field MAKTX into the Table and activate it .
Now again generate the Table maintainence for the table.
from Table maintainence generator go to the main program
there click the screen maintained for Table maintainence generator .
in the Pbo of the screen write the following code.
assume table name is table1.
Loop at screen.
if screen-name = table1-maktx.
screen-input = '0'.
modify screen.
endif.
endloop.
this will automatically disable the material description field in the Table Maintainence Generator.
This is will solve your problem
Regards,
Madhavi

Delete data with table maintenance generator

Hi All,
I have created custom table ZXXX and table maintenance generator.
I need to maintain data but delete them too. I can update and modify data but how can I delete them ?
Thanks for your answers !
Best regards,
Sandrine

ok, I found ..
I created an internal table to delete the content of my table ZXXX :
DATA : ws_zxxx TYPE zxxx OCCURS 0 WITH HEADER LINE.
select * from zxxx into CORRESPONDING FIELDS OF TABLE ws_zxxx
DELETE zxxx from table ws_zxxx.
commit work.
it works !
thanks all !

Can you please help me with validation logic for Events in Table maintenance generator

Can you please help me with validation logic for Events in Table maintenance generator,i.e if i enter record in 1st internal table then automatically 2nd internal table should be updated.

Hi Glen Anthony,
Thanks for replay,
I used foreign key relationship between those 2 internal tables....
I used event 05: When creating a new entry. I want to know the custom logic by which my 2nd Internal table gets automatically updated when i update my 1st Internal table
Thanks Glen.

Problem with table maintenance generator overview screen

I added a field in a custom table and then used table maintenance generator to regenerate the table maintenance screen.
I used 2 step to generate. The problem that I have is the field not displayed in the overview screen though it is visible in the single screen ( ie the second screen).
I am not sure where the problem is as the field is not visible at all in the table control of overview screen.
Please help me on this as to what could be the problem.

Usually it is enough to regenerate both screens and the modules, but sometimes it doesn't pick up all the changes. In that case just delete the maintenance dialog and recreate it. That should do it.
Regards,
Michael

Purpose of table maintenance generator

wht is the purpose of table maintenance generator

Hi Pavan,
The purpose of table maintainence generator is to enable the table maintenance through SM30, and to implement and validation etc on table field inputs.
SE11->Utillities->table maintainence generator
You need to enter the values of following fields:
1. Table name
2. Authorization group , and authorization object (select the suitable one )
3. Function group and package
4. Maintainence type : single or double screen maintainence view depending on the option selected.
5. Maintain screen number : you may specify a value or let the system generate one for you.
The validation code for the table entry is written in the flow logic of this screen. Even some of the fields may be made display only , by adding suitable code in the logic or directly disabling the input in table control in the layout.
Table maintanance is for creating,adding datas to an existing table.
it is for adding muiltiple records at a time in the table
A table can be manipulated by a program or manually.
When creating table, you will find a check box 'Table maintenance allowed'. If we
check that option, we can manually enter entries using SE16 or table
maintenance generator screen.
SE16 is for data browser.
Go to SE11, give the table name and click on change. Then Go to utilities--> Table
maintenance generator.
In the table maintenance generator screen, we should give Authorization Group,
Function Group name (Function Group name can be same as table name),
Maintenance type can be one step or two step, usually we will create with one
step. we should give maintenance screen number. After clicking on create button,
a table maintenance generator will be created.
To check it go to SM30 . In SM30, we find display, Maintain options.
We can view the table contents by choosing Display and we can create table
entries by choosing Maintain.
In the production system, end-users will not be having access to transaction
codes like SE11 and SE16. Developers will not be having access to many
transaction codes including the above two.
To view the contents of the database table, we will use SE16n in Production
system. Please find out the difference between SE16 and SE16n.
All these authorizations will be maintained by BASIS team, by creating access
profiles.
So in order to edit or create the contents of a database table, we should go for
table maintenance generator. In real time, authorizations will be maintained in
production system. (even in development and Test systems to some extent).
There is an audit like Sarbanes-Oxley Act for American clients, where every thing
will be audited by government agency. To know more about SOX, use the links on
the right hand side of this page.
The second reason is, we can edit or create multiple entries at a time, using table
maintenance generator.
Apart from that we have options like 'Enter conditions' in table maintenance
screen SM30. Please try to find out the use of those, by creating an example.
Table Maintenance generator: Difference between one step and two steps.
While creating table maintenance generator, we find below options:
When we choose one step, we have to give the screen number in Overview Screen field.
When we choose two step, we have to give both overview screen number and single screen number.
You can give any number for screen. Dont give 1000 screen number. As this
number is reserved for selection screen.
When we choose two step, two screens will be created for table maintenance. For
single step only one screen will be created.
When we choose two step, table maintenance will work as follows
Go to SM30, give the table name for which you have created table maintenance-
Overview screen will be displayed. To create entries, when you click on new
entries. Another screen will be displayed, where you give input and save. You can
enter one record at a time.
Go to SM30; give table name for which you have created table maintenance-
Overview screen will be displayed; To create entries click on new entries, you can
enter the records on the same screen. You can enter multiple records at a time.
We use single step generally, as it is user friendly.
To completely understand the difference and above points please do exercise by
creating table maintenance generator in both ways (using single step and two
step).
Link: [http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ed2d446011d189700000e8322d00/content.htm]
Link: [http://help.sap.com/saphelp_46c/helpdata/en/a7/5133ac407a11d1893b0000e8323c4f/frameset.htm]
Link: [/message/2831202#2831202 [original link is broken];
One step, two step in Table Maintenance Generator
Single step: Only overview screen is created i.e. the Table Maintenance Program will have only one screen where you can add, delete or edit records.
Two step: Two screens namely the overview screen and Single screen are created. The user can see the key fields in the first screen and can further go on to edit further details.

Error while creating table maintenance generator

Hi,
I am getting below error while creating table maintenance generator.
Screen SAPLZtest 0002 could not be generated. In DYNPFIELD_ATTR field LENGTH has the invalid value 241.
Reason for that error might be:
In the table I have a field with a dataelement(customized) of type Char and length 241.
But in the other table Iam using the standard data element(standard) of same type(241 char).In this table Iam able to create table maintenance generator without any errors.
And the domain Iam using is same for both the tables.
Please help me to solve this.
Thanks in advance,
Sravanthi

Hi,
you can go to transaction se51 and go your screen. active it.. you can find thesolution.
refer these links..
Error in table control
Error while creating table maintainence generator !
Thanks and Regards,
Ahamed.

Table Maintenance Generator : Editable Entry after validation fails

Hi,
I have created a Z table and a table maintenance generator to maintain the data.
I have to carry out certain validations when user enters data on Key and Non- key fields.
This is working fine, but the issue is with the key fields.
If validation fails, the table maintenance screen is displayed the date-field is grayed out (non-editable) as it is the key field of the table.
Now the user cannot change the data unlike the non-key fields were the user can modify the non-valid data and save again.
How can make the date field (Key Field) editable after entry in case the validation fail, so that the user can make the changes.
Please suggest the approach to handle the above scenario in events.
Thanks,
Keyur

Thanks Kiran for your inputs.
I have done the same thing what you have explained.
I have used a Form Routine as CIP_SAVE with Event Number as 01, since on event SAVE i need to validate whether dates are
overlapping the inputs dates or not.
Fields are :
Group ID (Key)
Start Date (Key)
End Date (Key)
Value (Non -Key)
Initial value in Table:
Group ID = 12345
Start Date = 01/01/2011
End Date = 01/31/2011
Value = 11.11
Now if i try to enter value:
Group ID = 12345
Start Date = 01/02/2011
End Date = 01/25/2011
Value = 99.99
& SAVE it... validation will fails because Start & End dates overlaps.
Hence, on Table Maintainance Screen all key fields will be in non-editable display mode, whereas non-key field will be in editable mode.
My requirement is that Start Date & End Date key fields must be Editable field.
Thanks.

Event 03 in table maintenance generator

Hello All,
I have created a event 03 in table maintenance generator. Because I need to check if the deleted key is still referenced in an other table.
I tried the following code, but only if I use the message the entry will not be deleted.
MOVE uebergehen TO <mark>.
MODIFY total INDEX sy-tabix.
<xmark> = <mark>.
MODIFY extract INDEX nextline.
IGNORED_ENTRIES_EXIST = abap_true.
* MESSAGE e000 WITH 'Entry not allowed to delete'.
Thanks in advance.
Marcus

had to put it in a generic form, hope it still works:
FORM event_03.
TYPES: BEGIN OF typ_extract,
           zview TYPE zview,   "or ztable, the one with the maintenance dialog!
           flags TYPE vimtbflags,
         END OF typ_extract.
DATA: ls_extract TYPE typ_extract.
* loop at marked lines
LOOP AT extract INTO ls_extract.
    CHECK ls_extract-flags-vim_mark EQ 'M'.
*   place existence check here!
*   using the values in ls_extract-zview-...
*   if value still being used, send message
    IF sy-dbcnt > 0.
      MESSAGE i...
      ls_extract-flags-vim_mark = '*'.
      MODIFY extract FROM ls_extract.
    ENDIF.
ENDLOOP.
ENDFORM.

Table maintenance generator is not saving entries.

Hi All,
I am facing problem in table maintenance generator.
I created a table maintenance for Z-Table.
In my table last 2 fields are a checkbox.
When we go to Sm30 and check/uncheck the boxes then save , message comes tht data saved , but when we come out and go back to maintenance generator , it's not saved.
while table maintenance in 2 step , then on detail screen it is working perfectly but on primary screen it's not.
when TM is single step , it's show entries saved but not saving in data.
I tried to delete and regenerate table maintenance but still not working .
Please guide me to ractify this.
Thanks in advance,
Ashish Gautam

Hello Friend,
Check with th etechnical settings of the ztable:
see if your buffereing is allowed, and log data chnages is checked.
If so :
Then select buffereing is not allowed and uncheck the Log Data Changes:
Also go to TMG:
Check if standard recording routine is selected, then select the no, or user recording routine.
After making these changes, delete the TMG and create a new one once again. You can check it will work fine now.
Thanks and regards,
Uttam Agrawal
[http://uttambpt.blogspot.com|http://uttambpt.blogspot.com]
Edited by: uttamagrawal on Jan 31, 2011 12:42 PM

Add field in table maintenance generator screen of maintenance view

Hi,
I am having a table with field user-id. I want to generate a maintenance view which will have corresponding user name as input disabled field. Since there are two tables USR21 and ADRP I need to access(not a direct check table) I will have to modify the code generated by the table maintenance generator.
Problem is that it is having one internal table EXTRACT at table control loop. That internal table cannot be accessed if you write a module inside the table control loop and try to catch. The error coming as EXTRACT is not object of structure and therefore no component. I tried to capture the value of the Loop but could not be successful. Any suggestion please.
Thanks,
Atanu

Hi,
sample:
      MODULE LISTE_UPDATE_LISTE.
    ENDCHAIN.
*--->begin of your change
    CHAIN.
      FIELD YTAB1-BILKS .
      FIELD YTAB1-BILKH .
       module check_bewar ON CHAIN-input. "your checks
    ENDCHAIN.
*-----> end of your change
ENDLOOP.
MODULE LISTE_AFTER_LOOP.
-> module check_bewar is in an includ z123_INCL
Regards Andreas

Field validation in table maintenance generator and input value grey out.

i have created ztable with 3 fields as em_no,em_no and addrnumber.
first two fields are custom fields but the third custom field need to validate the standard table adrc contains the value of the field addrnumber.
i need the query of field validation query which we write in create entry events in table maintenance generator and also if we give wrong value for addrnumber in sm30 maintain table, the input field need not to be grey out for next entry...
please help.

Hi,
create method -
>before saving data.....write the logic between the method
go to utilities->table maintanance ,,,after creating generator ---go to envirnment->modification->events.
create event -.>.as zsave select event type 1(before saving data to table) write code in include....
consider data for field3 is 10 .
lv_new = ztbr(table name)-field3.
select field3 from ADRC(ZTABLE) into wa_new (TYPE ZTABLE) where field3 = lv_new.
if sy-subrc = 0.
     working fine
     else.
    message i888(sabapdocu) with 'data invalid'.
endform.
This will help u...
Thank u.........

EVENT problem in Table maintenance generator

Hello all
             I m working on 4.6C sytem. I m facing 2 problems in events in table maintenance generator
(1) I am using 04 event (After deleting records from table)   I have written BREAK-POINT in the Form .....ENDFORM... But the control doesnt stop there , when i select an existing record and press delete record button? not able to understand this
(2) When i implement even t 03( Before deleting records from table) , and select an existing record and press delete record button . Control successfully Go to corresponding FORM ...   BREAK-POINT ENDFORM .
But now the problem is.. in debuggin i can see the contents in TOTAL table but when i try to code LOOP at TOTAL ..ENDLOOP...it gives me syntax error saying " table TOTAL doesnot exists or not defined..but similar field TOTAL_S , TOTAL_M , TOTAL_L exists.. ???
how come i can see the same during debugging but cannot code it ?
Plese help
Nilesh

Hi Nilesh,
(1) I think the control will stop there after you delete AND save. Not sure about that but give it a try.
(2) I believe you are trying to access fields inside table TOTAL, is that right?
Actually you have to declare a work area with your Z table type.
DATA: w_workarea type ztable.
LOOP at total.
w_workarea = total.
endoop.
Then you can work with w_workarea.
Best regards.

Disabling fields in table Maintenance generator

Hi Experts,
I would like to restrict some fields in table maintenance generator dynamically/ statically.
Here is the situation.
I have generated table maintenance for the table ZMARA and I have created three transactions for the above single table maintenance generator.
i.e .. Transaction      ---        Table
          ZT1                  ---         ZMARA
          ZT2                  ---          ZMARA
          ZT3                  ---          ZMARA
I am using above three transactions in my module pool program. Based on the certain conditions I am calling different transactions i.e ZT1, ZT2, etc
Here is my requirement:
Suppose if I call ZT1 transaction, I need to display only few fields. i.e ZMATNR, ZMTART, ZPRODH.
or remaining fields should disable. User should not allow to change the content, even if it is new entries/existing entries. only ZMATNR, ZMTART, ZPRODH.
Suppose if I call ZT2 transaction, I need to display only few fields. i.e ZMATNR, ZMTART, ZHTSCODE
How can we restrict dynamically when you call table maintenance generator table through transaction
or
How can we generate table maintenance for few fields?
Edited by: r badveli on Mar 16, 2009 4:27 PM
Edited by: r badveli on Mar 16, 2009 4:27 PM
Edited by: r badveli on Mar 16, 2009 4:28 PM

Hi ,
go to Se11->Table maintenace generation. Double click on screen to edit and assign the field you want to display/hide to groups. In PBO , after the following lines..
LOOP AT EXTRACT WITH CONTROL
TCTRL_ZMARA                         CURSOR NEXTLINE.
   MODULE LISTE_SHOW_LISTE.
ENDLOOP.
Write a new module in PBO and edit the SCREEN as per the Tcode, you are calling,,'
Hope this helps you
Rj

Event code in table maintenance generator

Hi All, Need to call event in Table maintenance generator of the z table. I have to use 1st event (Select ’01’ – Before saving data in the database). Need to do fallowing job: Table cleaning : Delete all records with value year =< 2011 -New rule : No save can be done with value (Pst Var, PA,PSA, Cost = ‘ *,*,*,*’). I am attaching table entry with this mail, I have written the code for this but not sure please suggest me modification if required for this.Because i have never done this before. Thanks and Regards Sankil

hi Sankil
Some variable is not available in your code and you did not modify EXTRACT table.
Try to modify your code as blow:
This event has no standard routine. The following global data is available for the realization of the user routine:
•internal table TOTAL
•field symbols
•field symbols <ACTION> and <ACTION_TEXT>
•<STATUS>-UPD_FLAG
If internal table data are to be changed before saving, t he changes should be made in both the internal table
TOTAL and in the internal table EXTRACT.
FORM abc.
DATA: F_INDEX LIKE SY-TABIX. "Index to note the lines found
LOOP AT TOTAL.
IF <ACTION> = desired constant.
READ TABLE EXTRACT WITH KEY <vim_xtotal_key>.
IF SY-SUBRC EQ 0.
F_INDEX = SY-TABIX.
ELSE.
CLEAR F_INDX.
ENDIF.
(make desired changes to the line TOTAL)
MODIFY TOTAL.
CHECK F_INDX GT 0.
EXTRACT = TOTAL.
MODIFY EXTRACT INDEX F_INDX.
ENDIF.
ENDLOOP.
SY-SUBRC = 0.
ENDFORM
refer event 01: http://help.sap.com/saphelp_nw04/helpdata/en/91/ca9f0ea9d111d1a5690000e82deaaa/frameset.htm
regards,
Archer

Table maintenance generator with radiobuttons

Similar Messages

Maybe you are looking for