Table of Authority Object and value Per User

Hi
I have created a Z authority object, is there a table that can show me all the users that have this authority object and its value
Thanks Ami

Hi,
thanks for your answer. I know the parameter: FOR USER user. But i don't whant to check
the authority, i want to know in my example which value has the user in fields ACTVT and STATM.
Thanks.
regards, Dieter

Similar Messages

How are objects and values passed in rmi?

how are objects and values passed in rmi?

In java there are two mwthods of passing aruguments and returning results.
1) by value
2) by reference.
While invoking local methods, java passes primitive types by value and objects by reference.
However while invoking remote methods both these data types are passed by value. Except for the objects being exported. Reason being two different JVM's are involved and thus memory addresses references of one are meaningles for the other. However "pass by value" for values of type object are implemented as deep copy.

When to set iwtUser-role and other per user schema using custom athentication?

I have written my own authentication module and would like to set per user schema on login. Can I write iwtUser-role, iwtCalendarProvider-calendarUserPassword, etc from the authentication class?

Yes you can, after the authentication is complete you get the profile object and then set whatever value you want to set for particular attributes you want to set ..

Authority objects and tcodes

Hi!
In SAP, there is a table, called AGR_1251.
In SE16, I give the OBJECT field, the S_TCODE value.
Now I can see that there are a lot of combination, to give a transaction code to an authority object within the table's low and high columns.
I mean, if I'm interested in checking the "XD01" transaction, there could be many possible cases which makes the "XD01" transaction correct, like
- XD01
- XD00 - XD02
- XD0*
- XD*
- XD00 - XD99
All of these intervals, and * values are good for the XD01 transaction.
I would like to find a function module, which can tell me those entries, where the XD01 transaction fit. Is there one?
Thank you
Tamá

Hi Tamas,
1. One way of doing this is :
a) select the required records from this table
   with your conditions
   and OBJECT = 'S_TCODE'.
b) Here u will get some records.
c) take another RANGE variable
d) loop at the above internal table found in (a),
    and populate the range variable with LOW and HIGH,
   and also sign = 'I' and option = 'BT'.
e) then using the variable on screen,
   u can check
   If variable IN Range.
*--- means right to tcode.
endif.
regards,
amit m.

Amount of Resources CPU and Memory per user

Hi,
We are looking to deploy a Line of Business Application via RemoteApp and a custom template. The application requires a significant amount of RAM and CPU, can someone tell me who much RAM and CPUs are allocated per session \ user? I would expect
that we would use the Standard tier if any difference to resources available.
Thanks
Giles

Hi James,
Currently there is no way to configure resources other than selecting either Basic or Standard. If you would like a lower per-VM user density (and thus higher resources for each user) what you can do is create more collections, and only assign
a small number of users to each.
For example, say you only wanted to have a maximum of 4 users on each VM, providing typically at least 1 vCPU per user. In this case you would create collections with the Basic plan, each linked
to the same template image, and only assign a maximum of 4 user accounts on the user access tab of each. Assuming each user uses 80+ hours a month, the total (before discounts) cost for each collection would be $228/month, making each user
cost about $57/month, slightly less than equivalent cost under Standard plan pricing if you factor in resources per user.
You probably already know this, but I will explain how scaling works normally for others that may read this. Azure RemoteApp will automatically create more VMs for each collection as needed to handle user load (Scale-Out) and shut down VMs when the
user load is reduced (Scale-In). The key thing that affects this scaling mechanism is the maximum concurrent users allowed on each VM, which for Standard is 10.
In your case you are asking if you can have more resources per user, hence my instructions above for creating multiple collections and limiting the number of assigned users to less than 10 each.
Depending on your unique needs it may make more sense to create a custom RDS deployment on Azure IaaS VMs. In this case you could control the size/type of VM used, user density, etc. Downside is you have to set up and manage more
RDS components than you do if you use Azure RemoteApp.
-TP

SAP Table for Custom variable and values?

Hi folks.
I am looking for a SAP standard table which I recall existing. This table was designed by SAP to store a variable name and value(s), so that no programmer would ever hard-code values into their reports. Instead, the programmer would create a new record in this SAP standard table with a unique variable name, and assign the constant value to this variable.
In the report this variable would be read from the table and the value used. I think this table starts with T, but not sure.
Does anyone have any idea what the name of this table is?
Regards,
Eugene

Hi Shameem,
This is a profitability analysis reporting table, which is not what I was looking for. The table I remember was a cross-application table that was specifically created for the purpose.
Regards,
Eugene

Objects and Attachments in User Decision Step not possible

Hi all,
I have designed a workflow where during the 1st step(Archivelink image display) I am able to display archived image, and in the inbox for the first workitem I can see the Objects and Attachments link related to the image.
But my second workflow step(is userdecision dialog), I would like to see the same archived image link as the in the previous workitem under Objects and Attachments.(I dont want to create a new attachement)
Can somebody tell me how can I accomplish this task.
Thnks
Yogi

Hello,
what you need todo is to use a container binding from the single step task from the 1st step where you bind the image object to the workflow container.
Then in the user decision task you create a container element which refers to the image object. Then use a binding to 'send' the object from the workflow container to the task container.
Kind regards,
Peter

Table for Business Objects and BAPIs

Hi All,
Is there any table which correlates a Business Object and all the BAPIs related to it.
Any pointers in this regard would be helpful.
Thanks,
Saher

hi,
GOTO SE11-> TOJTB-> give your business object
You get the list of programs where you are using your business object.
If a BAPI exists with this business object even that's displayed.
Regards
Sharath

Accounting entry not posted but MBEW table shows total stock and value

Hi
My R/3 version 4.7
I have a material which is stockable and valuated of material type ERSA(Spare parts)
This material was created in may 2007 and material ledger activated,i dont see master records in accounting view in material price analysis tab for the month may 07 till aug 07,and i see master recordsfor the month sep 07 till jan 08
For this particular material in the report MB51 for all the 3 material documents posted,there are no accounting entries in accounting document.
Also in the report output the field amount in local currency is zero for all the 3 material documents.
1.1st material document with mvt 202 for qty 1 posted in the month of may 07,no entries in acc.doc
In this case,MSEG-DMBTR(amount in local currency) was not updated
Also i dont see master records for this period in accounting view in material price analysis tab,in material master.
2.2nd material document with mvt 261 posted for qty 1 in the month of nov,no entries in acc.doc
In this case,MSEG-DMBTR(amount in local currency)was not updated.
I see master records for this period in accounting view in material price analysis tab with stock 1 qty and value zero
3.3rd material document with mvt 101 posted qty 1 in the month of dec,in this case once GR is done MSEG-DMBTR(amount in local currency) was not updated,but mbew has the entries for stock and value.
Can any one let me know why the system is not updating the mseg-dmbtr and as well affecting MB51 report
Regards
Ratha

The settings in Customizing which define that no negative stocks are allowed for the storage type, have only an effect on the transfer orders. In addition, you must also set message L9040 as an error message. For this, call up the Customizing and branch to: 'Logistics Execution -> Warehouse Management -> Interfaces -> Inventory Management -> Allow negative Stocks in Interim Storage Types'. There, execute point 'Control of System Messages in Warehouse Management' and enter message type 'E' for message number L9040

Audit tool which generates Users, Roles, Auth objects, and Values

Hi,
I have a list regarding authorization provided by auditors.
Here I want to know how the auditors generated the list.
Do you know the transaction code or the program ID.....?
Probably the data in the list was extracted from our system, and some data were manually processed or added.
Hard to write down but fields and examples appear in the list;
-FIELDS-
User
Group
Full Name
Rule
Side
Operator
Role
Authorization
Attribute
Attribute Value
Associated Role
Associated Authorization
Associated Attribute
Associated Attribute Value
-EXAMPLES-
testuser01
group001
user01 test
Create Maintain Sales Order vs Create Maintain Customer Master Records
LHS
Any
Z_ROLETEST_001
Authorization=T-D524126500, Object=S_TCODE
TCD
FB01
Z_ROLETEST_002
Authorization=T-D524126600, Object=F_BKPF_BUK
ACTVT
1
Thank you in advance.
/Y.Shirako

> Install ABAP on your system which provides files for them to crunch in an SQL (or similar) database.
> Tool extracts data via RFC calls into your system that is then processed externally.
Yes, the interfaces of those tools are often a hazard in themselves...
I typically recommend customers to delete them completely. Sometimes this comment also exists in the code itself, but who reads code now-a-days in GRC projects, and why should they have to? ;-(
This looks very much like one of those tools (where the SQL statements are built externally).
Cheers,
Julius

Table for Material Quantity and Value for particular month and year

Hi All
My requirement is that for a particular month and year I want to know the stock quantity and stock value for a particular material for a given plant.From which SAP table can I get this data as I want to fetch data for my Y report?
Regards
Satish Kumar

Hi,
You can use MB5B table as suggested earlier.also you can use:
MBEW-VMKUM --> stock for previous month period
MBEW-VJKUM --> stock for previous year period
PLease view these links which migh tbe helpful to you:
http://help.sap.com/saphelp_47x200/helpdata/en/39/55fee3bc6111d4b3960050dadf0791/content.htm
TableStock
Thanks
Nisha

Loading lib per object and not per class possible?

Hello, I have a problem with JNI and some libs I want to use.
On the Java side I have a class called FeedController that uses a class SenderJNI to communicate with a native lib, that implements the interface of SenderJNI. I have several native libs that all have different implementations of the interfaces.
What I want to do is to load a specific native lib for a specific SenderJNI object. I thought it could work with the following code.
public class SenderJNI {
     public native void init(String host, int port, String streamname);
     public native void send(String csvString);
     public native void close();
     public SenderJNI(String libName) {
           Runtime.getRuntime().load(libName);
}The problem I've encountered is, that loading libA.so for SenderJNI object A works fine, but if I want to load libB.so for SenderJNI object B, I still get the implementation of libA.so. So loading seems to be on a class based level.
Is there any way to load those two libs for different SenderJNI objects?

This might work.
Load all three libraries in your SenderJNI. Create three sub classes of your SenderJNI java class. They can just be stubs that dont implement anything.
Implement the native methods just once between the three libraries.
In your navtive methods, use IsAssignableFrom to determine which instance of the class was used, and call the proper library function based on the instance type that the call originated from.
jboolean IsAssignableFrom(JNIEnv *env, jclass clazz1,jclass clazz2);

How can i save job settings in Capture Perfect per computer and not only per user?

Hi
I got a production computer with capture perfect 3.0
Is there a version where the job settings are saved per computer and not per user?
This is a problem when i am creating scanner jobs everybody on the computer should be able to use.
TJ

I'm having the same problem and I use the built-in camera app. I have and iphone 4 and my friend uses and iphone 4s and his saves as JPEG. Mine saves as png. How can I get mine to save as JPEG?

Process Task Child Table Delete Event passes empty values

Hi All,
I'm trying to implement a delete event in a process task for a child table. I am assuming the value to be deleted
should be getting passing into the adapter but it's passing empty strings instead. The insert event is working fine however.
Any one else using the delete event that works?
Thanx
Fred

Hi Kevin.
Any idea how to programmatically access the "old value" variant of a form field?
It's the sort of thing one needs occasionally when a value changes and some associated capability needs to be updated. The old value specifies what needs to be removed while the new value tells the system what is to be added in its place.
(It so happens in our environment that we have dozens of these values per user profile, so it would be very painful to store "old" values in a parallel set of fields.)
Thanks,
Dan

Usage of AUTHORITY OBJECT

Hi,
Could you please help out how to create AUTHORITY OBJECT and usage in reports with sample code and transaction codes.
Thanks,
Madhu

Hi Madhu,
DATA:wa_flight TYPE t_flight,
it_flights TYPE t_flighttab.
SELECT-OPTIONS so_carr FOR wa_flight-carrid.
for authority-check:
DATA:
allowed_carriers TYPE RANGE OF t_flight-carrid,
wa_allowed_carr LIKE LINE OF allowed_carriers.
START-OF-SELECTION.
fill a range table with the allowed carriers:
SELECT carrid
FROM scarr
INTO wa_allowed_carr-low
WHERE carrid IN so_carr.
AUTHORITY-CHECK OBJECT 'S_CARRID'
ID 'CARRID' FIELD wa_allowed_carr-low
ID 'ACTVT' FIELD '03'. " display
IF sy-subrc <> 0.
CLEAR wa_allowed_carr.
ELSE.
wa_allowed_carr-sign = 'I'.
wa_allowed_carr-option = 'EQ'.
APPEND wa_allowed_carr TO allowed_carriers.
ENDIF.
ENDSELECT.
check this link
http://techrepublic.com.com/5100-6329_11-5110893.html#
http://www.sap-img.com/ab035.htm
Regards,
Sridhar

Table of Authority Object and value Per User

Similar Messages

Maybe you are looking for