Table of balance stock split by status stock on posting date
Could you please suggest me for the table of balance stock split by status stock on posting date?
MCHB can not support my requirement because it has current stocks.
I give you for exsample data.
Stock on 01.03.2011 (This is a selection date)
Material code || Batch || Base unit || Unrestricted use stock || Stock in quality inspection || Blocked stock
A0001 || 09K1 || EA || 10 || 2 ||
A0002 || 10K1 || EA || || 9 || 3
Stock on 31.03.2011 (This is a selection date)
Material code || Batch || Base unit || Unrestricted use stock || Stock in quality inspection || Blocked stock
A0001 || 09K1 || EA || 5 || 2 || 1
A0002 || 10K1 || EA || 6 || ||
Similar Messages
-
Hi
Dear Guru
we have done sum stocks close in year ending 2008, in that time we have tranasferd Stock from material to material, we have tranferd all the stocks from material A to Material B.
But theire is no stcoks in the MMBE for material A , for todays date , when we are going to check MB5B, on 31/03/2008, it is showing valuated stock, of sum quantity,
we have checked all the Material Stock Transaction, no where it is showing stock eccept in MB5B That to posting date on 31/03/2008.
so how to remove that stock on posting date(Valuated stock). only in MB5B.
Kindly suggest
Madhuhi
For doing stock transfer , stock must be avalaible on current date and on the last day of the previous month, if u want to to do transfer postion on previous month's date.
reward if useful
Amit -
Unable to view stock on a posting date
I'm implementing inventory scenario in BI.
Initialized the stock in R/3 and uploaded into cube 0IC_C03 through 2LIS_03_BX.
Also initialized 2LIS_03_BF and uploaded into the same cube.
When i run a query, I see opening stock.
But if i change posting date to view stock for that date, I dont see any change in quantities.
Seems like the material movements are not being captured into BI.
Please help...
Thanks in advanceElangovan,
yes, with 2LIS_03_BF, 888 records were added.
I compressed both requests, 2LIS_03_BX WITH marker update and 2LIS_03_BF with NO marker update.
You asked about maintaining markers, not sure if there was anything else to be done?
Also, please help me with the transaction keys...not sure what that is. I'm new to inventory management in BI.
Thanks -
Need to know in ISU - Devices in AVLB status / Stock
Hi All,
I need to find the Devices which are all in Available status / Stock ....Can anyone please help to Identify the Table name where to see the Devices / MSN in ISU .
Thanks ,
Hari.Hi,
Use the below FM to get the user and system status of device.
CALL FUNCTION 'BAPI_EQUI_GETSTATUS'
EXPORTING
equipment = gs_equi-equnr
language = sy-langu
TABLES
system_status = gt_sys_status
user_status = gt_user_status.
Regards,
Balu -
Tables/FM for opening/closing stock for material on given posting date
Hi All,
I had requirement of find the opening/closing stock for material on given posting date. The values we can find out using TCode - MB5B.
But I cannt use MB5B to extract data because I need to find detials for thousands of material.
Can you please adivce if their is any FM or tables through which i can find this detial on any given date apart from current date.
Thanks & Regards,Hi,
[https://forums.sdn.sap.com/click.jspa?searchID=19631709&messageID=6593903]
[https://forums.sdn.sap.com/click.jspa?searchID=19631709&messageID=6630975] -
Tables relevant to MRP, MD04 tcode and stock related tcodes
Hello gurus,
table related to STOCK, MRP, AVAILAIBILYT CHECK AND TOR, MD04 Tcode
Thanks in advance
Sameerhi
for stcok
MARC, MARD,
MSKA Sales Order Stock
MSKAH Sales Order Stock: History
for MRP
MDIP Material: MRP Profiles (Field Contents)
MDKP Header Data for MRP Document
MDKPDB Header Data for MRP Document
MDLG Customizing: MRP Area Storage Location
MDLL Customizing: MRP Area Subcontractor
MDLV Customizing MRP Area
MDLW Customizing: MRP Area Plants
MDMA MRP Area for Material
availabilyt check
TMVF Availability Check Control
TMVFP Availability Check: Blocks
TMVFT Availability check control: Texts
TMVFU Scope of Availability Check (Default Values)
TMW00 MRP Default Values per Material Type
for MD04
VBBE Sales Requirements: Individual Records
VBBS Sales Requirement Totals Record
UMD04 Default Values for Planning Table in Repetitive Mfg -
Consignment pick-up should go to 'Q' status stock.
Hi All,
Standard: When we do PGR for a consignment pick-up, the stock goes to unrestricted.
I need: The stock should be registered as 'Q' stock. Now i am not talking about a QM function here since we are not using QM. Like for a normal return, we have 655 MVT that takes the stock to 'Q' status, similarly i want this to happen for Consigment Fill-up's.
Thanks
Edited by: Lou Penn on Aug 29, 2008 8:06 PM
Edited by: Lou Penn on Aug 29, 2008 8:07 PMHi,
I am not quite sure, but in transaction code OMJJ, for the movement type 632, can you fill the value S in GR blocked stock field and try?
Regards, -
One of my stocks will have a reverse stock split tomorrow. how do it do that
One of my stocks will have a reverse stock split tomorrow. How do I make this change on my portfolio in Firefox. The name of the stock is Citigroup Inc.
Thank you
BobThis probably is a feature of your stock tracking site (for example, Yahoo finance) or portfolio management tool. Or maybe you have an add-on I don't have?? Since your financial data is sensitive, you may want to contact your site directly rather than posting about it here.
-
Status Stock M and Stock Category S
I have problems for GR using MB1C and mov 501 because I need to use that with Status Stock M and Stock Category S, Do you know if is possible this kind of combination M and S for GR?
Hi Rose, thanks for your information, let me explain you all the context,
First I need GR for damage materials to the WH but with Special Stock field = M for non valued (without accountant document) and second this material needs the stock category "S" (blocked stock) because this material doesn't need to create a necessity when the MRP runs (due is scrap material).
I hope this information could clarify my question and is enough for you to give me an answer
Thanks in advanced
Diana -
Stock on posting date with storagelocation,batch and stock types informatio
Hi,
I'm needing a report (similar funtion of MB5B) which must reveal the stock postion (closing balance) of the materials on a particular date alongwith storage loactions, batches and stocktypes (Unres/Q/Blkd).As such MB5B either gives the output either by storage location or by batch, not the combination of both.
Else provide any possibilty means( Database tables) from where i could arrive these mention outputs.
I could be able to get the information by collecting the values from MKPF & MSEG tables. But this information only suffice the material movements carried on that particular date.. And i will be not having the closing balance as a whole.
I even wonder to get any such a kind of information in which i could able to get the stock with stock types(Unres/Q/Blkd).
Any light on this matter is highly appreciable.
Regards
PrasannaHi Amit Bakshi,
Thanks for the reply..
I executed the suggested program but i found the same kind of information aslike in MB5B..
The information all i'm looking is to get the closing balance of the given material with storagelocations, batches and stock types on a given posting date.
For eg.
On 15 / 03 / 2011
Material A
Batch Slocation Stock type Closing balance Qty.
A1 S001 Unres. 50
A1 S002 Unres 120
B1 S001 Quality 15
C1 S003 Blocked 30
In MB5B i could able to get the values of closing balance either Storage location level or by batch level but is it possible to get the combination of both along with stock types?
Reg
Prasanna -
Stock report for a period (based on posting date)
Hi Experts,
We have a requirement as under:
1) We want a report for a period say from 01.04.2011 to 30.09.2011 (closed period for both MM and FI postings). Report is being taken on a later date say 01.12.2011.
2) The report should say the status of stock as of 30.09.2011 only even of being taken in the month of December
3) I tried to take the desired report through MB5B for the period 30.09.2011 to 30.09.2011 (selection date fields) on 20th december, 2011 and noticed that if same report with the same selection criteria is taken at two different times, output data is not the same whereas MM and FI posting periods are already closed.
Can anybody suggest alternative SAP standard report where output will remain the same if report with same selection criteria is taken at different intervals ELSE in case of change we should be able to see the documents posted in between if back dated entries have been posted after opening MM /FI period.
thankssure it speaks the same, but it mentions as well the reasons (1) and has much more information (2) and a solution.(3)
1)
user starts transaction MB5B for a very large number of materials or for all materials in a plant
During the runtime of transaction MB5B, goods movements are posted in parallel:
- The results of transaction MB5B are incorrect.
- Each run of transaction MB5B returns different results for the same combination of "material + plant".
Example: Transaction MB5B should process 100 materials with 10,000 MM documents each. The system takes approximately 1 second to read the material master data and it takes approximately 1 hour to read the MM and FI documents. A goods movement for a material to be processed is posted approximately 10 minutes after you start transaction MB5B. The stock for this material before this posting has already been determined. The new MM document is also read, however. The stock read before the posting is used as the basis for calculating the stocks for the start and end date.
Even for an old and closed period, MB5B starts today and calculates backwards any movement to finally get the stock for the time your specified in your selection.
2)
The SAP standard release does not include a solution
so you have to understand that there is no real alternative transaction in SAP
3) and then they provide a large section with a workaround that can be developed by an experienced programmer within 3 to 5 days.
So how shall anyone here be able to tell you an alternative report?
if someone does, then it is an owndeveloped z-report which is not available in your sap system.
if you know that people want lookup period closing stocks at any time in future, then either schedule MB52 at month end and store the list somewhere (and do not allow backposting)
or have an Abaper create a stock report based on the history tables MARDH, MCHBH, MBEWH etc.
And even here you may encounter an issue at some day, if you start archving special stocks or material masters, because then the stock figures from the historic tables are gone and you cannot rebuilt a reliable stock report . -
Logic for carry forward of previous stock to current period stock.
Hi Experts,
Client is using already MC.9 for see the stock analysis report, however as per there requirement we are exploring BOM as well as fetching quantity from table level as well. in my report I am experiencing difficulty to carry forward previous period closing stock quantity to current period stock quantiy, if there is no received for current period, however the same is happens in MC.9
Could any one tell me what is the logic behind MC.9 which is do carry forward previous period closing stock to current period stock quantity in report.
As per the requirement I am using S031, S032,S033, however unable to get logic for carry forward the previous month stock quantity to current month.
have a requirement of creating a report of showing material stock period wise for each plant in below mention format.
Header 1
Header 2
Header 3
Header 4
LFGJA/LFMON
ROH (MT)
HALB (MT)
FERT (MT)
11.2013
100.000
121.000
121.00
12.2013
50.000
12.000
123.00
01.2014
23.231
.23.234
45.342
02.2014
23.231
34.094
45.098
03.2014
34.098
98.983
00.000
04.2014
00.000
69.093
98.098
05.2014
00.000
89.098
00.000
For Example Break up of ROH material plant wise in below mention format.
LFGJA/LFMON
WERKS
MENGE (MT)
11.2013
P001
30.000
11.2013
P002
50.000
11.2013
P003
20.00
Thanks in advance,
SKNHi,
The last period closing stock = current period opening stock. You may get the details from MBEWH and S032 tables. Refer the doc: Material Stock and Valuation History tables - how to read them
Regards,
AKPT -
Restrict goods issue if stock on posting date is zero
Requirement:
Current Inventory period : July 2011
Stock of a material from 01.07.2011 to 30.07.2011 is zero(in MB5B report)
I upload stock of material or GRN occur on 31.07.2011. Say Quantity u2013 100
Now stock as on 31.07.2011 is 100 in MB5B
Still, Stock of a material from 01.07.2011 to 30.07.2011 is zero(in MB5B)
Now, If I do goods issue of a material quantity 100 on 15.07.2011. System allows goods issue. though opening and closing stock as on 15.07.2011 is zero.
After goods issue transaction if I check stock of material on any date between 16.07.2011 to 30.07.2011 , The opening stock and closing stock shows negative.
I want to restrict goods issue if stock on posting date is zero or less then stock available on posting date.
Please suggestHi,
This is not the way SAP is designed. As the previous speakers wrote (and as you noticed yourself), SAP maintains stock figures in the database per month rather than per day. MB5B makes complex calculations in order to find out how much stock you had on a specific date - as you probably noticed on the response time. Performing such calculations every time you do a GI would be unfeasibly heavy task for the system - remember there are organisations that perform hundreds of inventory movements a minute!
An alternative solution I suppose would be to maintain the daily stock figures in the database. This would make the finding of the stock figure very quick, but on the other hand, the maintenance of such table would be unfeasible - if you post today a GI on say July 1st, you would need to calculate 36 stock figures and update 36 database records!
Hope this explains the technical issue.
BR
Raf -
Any Standard FM for material stocks on posting date using Tcode MB5B
Hi,
I need Standard FM to get material stocks on posting date using Tcode : MB5B
Stock type i am using is : Storage Location/Batch Stock
the Input i am providing is Material, Plant , Storage Location, selection date From , selecDate To.
Then i need to get data that it provides header and document item level.
Can u please tel me how do i get that material stock data on posting date and in which tables
it will be populated in the database.
ITs required can u take view and post info
Thanks & Regards
sivakumar kasa
Edited by: siva kumar kasa on Dec 21, 2010 2:30 PM
Edited by: siva kumar kasa on Dec 22, 2010 7:15 AMhi Rehan,
I have checked all settings also enhancement but there is no as such control to restrict backposting within current period
I think its self disipline action not to post backdated GI when GR is done on later date
Vishal... -
Hi All,
Like MB5B is there any t.code or table to see stock on posting date in Warehouse? (like in so and so bin and in that S.type)Hi
You can use transaction LT22 to see all transfer orders to or from a storage type and storage bin.
In the section Reference you enter if it should be source or destination data that should be taken into account.
Don't forget to enter the date at the bottom of the screen.
Br,
Erik
Maybe you are looking for
-
Adding a second hard drive to late 2008 Macbook Pro
I have a 15"unibody Macbook Pro from Late 2008. It works great, but I only have 320 GB of storage. I would like to add an additional hard drive to store all my files on. Is this possible or do I just need to replace the current drive with a larger on
-
Why Isn't xmlindex being used in slow query on binary xml table eval?
I am running a slow simple query on Oracle database server 11.2.0.1 that is not using an xmlindex. Instead, a full table scan against the eval binary xml table occurs. Here is the query: select -- /*+ NO_XMLINDEX_REWRITE no_parallel(eval)*/ def
-
Calling stacked canvases from tab pages
Hi, I am creating custom forms from TEMPLATE.fmb in Forms Developer 6i. The main form has various tab pages on a tab canvas for different functionalities. Now, I have some very large stacked canvases which I want to be called by clicking on a tab. Mo
-
Reg: GOING TO SELECTION SCREEN FROM ALV GRID.
Hi all, Iam using an ALV grid display. I have called the grid display every times when i select a check box in the grid display. Then when i click on the back button the screen navigates to the previous ALV grid. My requirement is to go to the first
-
Hello, I need to create alerts for lead creations. When I create a Lead I distribute it for a employee responsible, and these employee responsible should receive an alert in his Alerts Home Page. I've created an alert category in T-Code: ALRTCATDEF,