Table of contents missbehaving

Hello,
I always seem to encounter the same problem when setting-up the TOC of multi chapter books.
When I generate my TOC, the Heading 2 (flow A) title which is at the top of the page, always ends up placed after my Sideheads (flow B) which are lower on the page. As you can imagine, this is a bit of a problem.
I have played with the reference page, re-named my paragraph tags, and even changes “sidehead” to “Heading” just hoping that it was an alphabetical issue.
I know this must be a very basic problem but is making my Tuesday very unpleasant.
Your expert knowledge would be greatly appreciated!
Thank you!
Sylvie

One alternative that may work is to use a List of Markers (LOM) instead of a "real" TOC.
The markers need to be carefully positioned in your content with regard to the flows, but at least you have much more control over their positioning and the marker content that gets used as the ersatz "TOC" entry.
fwiw, I often use LOMs instead of TOCs. Another great advantage is that often TOC entries need to be shorter than the actual paragraph on the entry page, so that while the TOC entry might be:
Using Markers
The linked-to Heading1 might be:
Using Markers for Fun and Adventure
I make a habit of positioning the marker at the beginning of the paragraph, so that there's less chance of forgetting that they're in the text when one deletes a paragraph. Editing with text symbols on is, of course, also essential for sanity.

Similar Messages

Acrobat Pro 9.0 freezes when viewing/scrolling through the table of contents of a document

I am hoping someone can help me or has experienced the same problem I'm about to describe. I belong to the technical publications group of a fairly large company and I review a lot of PDF documents. I just installed Acrobat 9.0.0 (via CS4 Design Standard) and I've noticed on larger documents where there's a full page or several pages worth of Table of Contents, Acrobat 9.0.0 seems to freeze up when I begin scrolling through the TOC. For example, if I want to use the Text Edit tools or use a sticky note, when I press on an icon, Acrobat will freeze for a good 10 seconds, then will allow you to press the icon. It tends to freeze each time I want to make my next edit or even pressing the up/down arrow buttons to go to the next page. Once I get through the TOC pages, Acrobat seems to function normally--no freezes.
Has anyone experienced this? Would appreciate any kind of advice on how to fix--perhaps there's a patch or update?
I didn't experience any of this using Acrobat 8.0--I never had any real problems with Acrobat until 9.0.0.

Your issue may not be related to a difference between v8 and 9.
I have not had this problem on my computers, but a coworker had this issue. For many documents that others were able to open and scroll through without issue, his computer was freezing and unfreezing. IT determined his graphics capabilities were not able to keep up with the requirements of working with larger documents and gave his computer a RAM upgrade and a new graphics card. Particularly during scrolling, higher demands are made on the computer to graphically render and re-render page content. Documents giving him problems before became a non-issue.
A new graphics card is obviously a $$$ solution, but you might want to check to see if your RAM meets the minimum requirements and check to see if there are any program updates (Help > Check for Updates).
I have had an issue of pdfs freezing, but not specifically in the table of contents areas. If your document has pages with images that have an unusually high number of layers, it may affect the ability to work effectively in the document.

Acrobat XI PRO: Create a Table of Contents (TOC) automatically in top, after I have combined several pdf.files into a single pdf.file

Hey
I have now tried for hours, but now I give up!
MY WISH -
Create a Table of Contents (TOC) automatically after I have combined several pdf.files into a single pdf.file.
I have already bookmarks, shown on the screen (see screenshot below) but I want those bookmark to be visualised in a separate TOC in the top of the combined files.
This new TOC (which I have inserted) shall be printable and serve as a cover page in a binder.
I have seen other cheap pdf.programs in the market (e.g. PDF Converter Professional 7.3) which are able to make the above things, easy, fast and nice.
Regards
Ole Bünger, Kristianstad Sweden

Somewhat roundabout way but this should work:
Is there easy way to print bookmarks Acrobat Pro 9.5

Table of Contents vanishes when trying to update or regenerate in CS6

I'm working with InDesign CS6 on Windows 7 Pro 64-bit
This is an old, legacy document. Today, I needed to remove two pages, so of course, I need to update my table of contents and index. I had no problems with the index - it regenerated just fine. The TOC is another matter. I clicked Layout > Update Table of Contents. I got the message stating that the contents was updated. However, what actually happened was the TOC text vanished! And, it actually is gone because I can see two empty paragraph markers where the TOC used to be. I've tried regenerating it instead of doing the update. Same result - it's gone.
I'm still fairly new to InDesign, so I'm not sure what I can do to troubleshoot this. Any suggestions would be appreciated.

Sounds like ID doesn't think there are any paragraphs with the style names you've selected for inclusion.
But I'm not a fan of direct conversion of legacy files because these sorts of things, or worse, happen a lot. Try this: Remove minor corruption by exporting

Problem with Sections and Table of Contents

I have just purchased pages. Both my iMac and MacBook have Lion. I do not have the "sections" button on the toolbar. When I open the "inspector" and try to insert a Table of Contents, the "paragraph styles" pane is empty. How can I correct these problems as I would like to use pages for a family story

You have started your document with a Page Layout template. TOC doesn't work with text boxes. You need to use a Word Processing document and have the text in the main text layer.
In the New from Template Chooser you can see the types in the left side bar.

How to create the Table of Content (TOC) in WEB

Dear Sir
Please help me
How to create the Table of content (TOC) in Web Intelligence Report,
Thanks
Gnanasekarn.K
Edited by: Gnanasekaran Kandasamy on Nov 20, 2008 11:12 AM

Hi Gnanasekarn,
You can create TOC in webi using Open Document, You can create link on the TOC and you can connect that link to open new report .
With the help of open document you can open the specific portion of report.
So you can achive your requirement using URL reporting or Open Document.
Regards,
Chaitanya Deshpande

Creating a Table of Content (toc)

Hi
I am very new with Output designer, so please dont mind if it is a silly question.
I have to create a PDF report which has around 15-20 sections. I need a toc (table of content) at first page and at the specified position with page number for each section.
All the sections has some header and detail subforms, so pagenumber is not known at the begining for each sections. I am using xml file as the data file.
So can i use JFPREAMBLE to get the page number for different subforms, and write that on to the toc subform,
i did lot of mind storming but not able to resolve my problem, please help.
thanks and regards
nitin

Hello,
I was able to create a TOC for a recent customer in the UK.
Took a lot of work, but it worked.
You will have to create a TDF to get the data that you require to be on the TOC, but this is quite easy. The best way is to get the TDF to output the result as a seperate file, and then get the orginal data to call the file as the first thing that you do by using the ^file command
If you would like an example please drop me a line at [email protected]
Regards

Is Acrobat Pro right for us. We have an Employee Handbook that needs editing. Some is current pdf, some from an older version. Want to get all into one handbook, have the table of contents automatically adjust and link to specific pages from the ToC.

Is Acrobat Pro right for us. We have an Employee Handbook that needs editing. Some is current pdf, some from an older version. Want to get all into one handbook, have the table of contents automatically adjust and link to specific pages from the ToC.

You can download the trial version (http://helpx.adobe.com/acrobat/kb/acrobat-downloads.html) to convert the PDF back to WORD if you do not have the original. The conversion may not be perfect, but it is typically better than starting from scratch. You may be lucky and get a good result. You might check the settings (in the save screen) to try retain format versus retain text flow. The format version can be a pain to edit since it creates a bunch of text boxes. The flow version may require you to reformat in WORD, but you likely would want to do that anyway.

Report Generation Toolkit: Table of Contents in MS Word

Hello forum users,
I would like to add a table of contents to a MS Word document, using the Report Generation Toolkit.
I couldn't find a VI in the toolkit that does that, so I tried to modify the VI "Word Insert Field.vi". Doing so, I could access a property node of the class "Word._Document" and an invoke node of the class "Word.TablesOfContents" with the method "Add".
As this modified VI does not belong to the private LabVIEW class "NI_Word.lvclass", it is not possible to unbundle the (type cast) "report in" wire to get the "Word._Document" class reference. I can't add the modified VI to the NI_Word class either, because it is password protected.
There are so many methods and properties that are not used in the official Report Generation Toolkit, like this one. How can I access them?
Or maybe there is another way to add a table of contents to a MS Word document (programmatically). Maybe I have to use a template. I rather wouldn't, though.
Operating System: Windows 7 64bit
LabVIEW: 2009 [9.0 (32bit)]
Report Generation Toolkit: 2009
MS Office: 2003 SP1
Thank you for reading an answering.
Solved!
Go to Solution.
Attachments:
Word_Insert_TOC.png ‏68 KB

Hello again,
in the "Word Specific" > "Word Advanced" Palette of the Report Generation Toolkit, there is a VI called "Word Get ActiveX References" which essentially unbundles the private "report" data stream / wire. Thus, I can use the property and invoke nodes that make use of the "Add TablesOfContents" method.
I hope, that helps other users as I didn't find too many topics on Report Generation. Maybe it's just too easy...
Attachments:
Word_Insert_TOC_fix.png ‏60 KB

Any way to stop Pages (current) from creating Table of Contents when converting to ePub. My PDF conversion is perfect Thanks

Any way to stop Pages (current) from creating Table of Contents (in this case Chapter 1) when
coverting from Pages to ePub. This messes up my book. The PDF file created is perfect!
Thanks for any help. Jim

You might want to search/ask in the forum for Pages too
https://discussions.apple.com/community/iwork/pages

Can I create a custom table of contents and link to other .pdf files based on responses to a form?

Hey Everyone! First post ever, so bear with me:
I'm trying to create a streamlined method to use a form to let myself and others add information and select certain options to put together a custom table of contents. Basically, I would like to have a form with a series of text fill and single/multiple choice options that will automatically populate a table of contents based on the selections and will link to other .pdf files that are associated with the selections. I was hoping this would be possible with a form, but I'm relatively new to the function of the software as a whole and my research came up short. Any suggestions on how to start are more than welcome, and if I wasn't quite clear enough I would be happy to elaborate.
Thanks for your time!

You would need to search for other PDF creation software that can accomplish what you desire.
There are many cheaper PDF creation alternatives other than Adobe's Acrobat Pro software.
Also, try doing a web search under these terms to see if you can find an app/software/solution that may work for you.
How to create table of contents in PDF files

How do I create multiple TOC's (Tables of Contents) in one Pages document?

I'd like to have multiple TOC's (Tables of Contents) in one document. This is useful for me because I'd like to have a TOC for the regular chapters, then a TOC for the procedures, then a TOC for the tables in the document (it's a tech manual that I am writing). How can I do this? Thanks for any help you can render, and have a nice day!

fruhulda wrote:
If you haven't used a paragraph style it can't create a TOC but you get the blue box with the message.
Paragraph used.
It has nothing to do if there is one main TOC or several smaller TOC to do.
It isn't true that you can only have one TOC in a document. Use styles for your titles and headings. I do and it works fine without section breaks.
You also need to tick which tile and heading you want in the TOCs in the Document Inspector > TOC
Did that.
Thanks to Yvan's quoting from the User Guide, I see where it says each TOC only indexes the material up until the next TOC. Since I had them follow each other, that is why they had no content.
Still it defeats the objective of indexing different material throughout the document if all you get is what is between the TOCs.
Peter

How do I get the table of contents to toggle? I opened it while reading one book I had checked out from my library, but it is still open when I start another book. I am using Adobe 4 and Windows 8.1 on my PC.

How do I get the table of contents to toggle? It has remained open since I opened it while reading two books ago. Thanks for the help.

Thank you for your advice. I followed your directions, but came up with the same results. However, I did discover that whenever I open up the iPhoto Library that is already existing on my MacBook a certain set of pictures shows up. But then when I open up the iPhoto Library from the Hard drive another set of pictures shows up. BUT not ALL of my pictures are showing up on the iPhoto Library from the hard drive. At least the last two years of pictures are not showing up?! Actually, it appears that all the pictures are there from when I started using iPhoto about 5 years ago up until around the time that I got my iMac desktop computer and started using that (2 years ago). I have noticed that more recent videos I have made are showing up in a folder on the hard drive, but will not appear when I open up iMovie?! Any ideas on how to access my pictures from the last 2 years off of the hard drive???

ID CS5: How to include additional text into a table of contents and how to hide text from it?

I have the following problem:
1. I'd like to include additional Information in my table of contents which I don't want to appear in the text I refer to.
Example: I do have a picture with a caption saying:
picture 1: Blablabla.
And I want to have the source of the picture as additional information in the table of contents:
picture 1........Blablabla (source: thisandthat)........23
Still I don't want this additional content to disappear, as soon as I update the table of contents!
How can I achieve that?
2. And how can I have this the other way round?
Let's say I want the source in the caption, but not in the table of contents.
So the caption says:
picture1: Blablabla (source: thisandthat)
but the table of content says:
picture 1........Blablabla.....................23
I was trying to achieve this by two different praograph styles in the caption. One which would be listed, and one which wouldn't be listed, but this of course resulted in always having two paragraphs in the caption, which I'd like to avoid:
picture1: Blablabla
(source: thisandthat)
Any solution to this?
Best Regards,
Rainer Schwachsinn

Sorry, missed the second part of the question. I think the only way to do that is to use invisible "dummy" text of some sort, and if you're going to do it for some entries, you might as will do it for all.
One of the easiest ways is to put the text you want inthe TOC into an anchored frame attached to the actual heading in the text (so it moves along with it). Use a unique paragraph style for this text, and include this style, not the one applied to the headings inthe text, to make the TOC. I usually use a character color of red to make it satnd oout so I don't forget it's there, and the position on the page isn't really critical. Select the anchored frame, open the Attributes panel and make it non-printing. You'll see it in editing mode, the TOC will pick it up (as will variables, if required) but it will disappear on output.

How to use different images in the Table of Contents?

Hello everyone, I am creating an iBook about Architecture and I would like to have different images for each Chapter in the Table of Contents... But when I add an image it automatically appears on all the other chapters, too. What am i doing wrong?

You drag the image to the screen and it replaces the placeholder image.
When you hover over the current image, don't you get the message "this is a placeholder . . ." under your mouse pointer?
I think the documentation states that the new image must be jpg or png, but a Photoshop image seems to work too.
In portrait mode, only one image shows at the top of the list of chapters, and that can be changed too.
But in landscape mode, all of the separate chapter images can be accessed by clicking the littel dots at the bottom of the screen when at the TOC page.

Table of contents missbehaving

Similar Messages

Maybe you are looking for