Table of Contents Showing on Desktop, but not in iPad preview

The table of contents was working just fine, meaning that it showed in both the work on the desktop and then when I sent a preview to the iPad.
I'm not sure what I have done, but now, while the TOC shows on the desktop version, it doesn't show up in the iPad preview.
Not sure where to start to solve this. Any help or tips would be great.

Update: I don't know why, but it has started working again on its own. I suspect that shutting down everything and restarting helped, but I don't know for sure. I'm just glad it is working again! Peace.

Similar Messages

  • IPod Classic 80GB shows on desktop but not in iTunes, so will not sync

    My work Mac has just been upgraded to 10.5.8, and with it iTunes to 10.1. Now, when I connect my iPod, it appears on the desktop but not in the iTunes panel. As such, it won't sync any new content.
    There is no problem with the cable, as the iPod charges while connected. I've tried resetting the iPod about a dozen times, which has no effect (once in a while the iPod says it is synchronizing, but this only lasts a few seconds and then disappears). Is there anything else I should try before I take the big step of formatting the iPod? I'm reluctant to do this because at the moment I at least have an iPod full of music - if I format and it still won't sync, I'll have a useless empty black box! Is it possible to go back to the previous version of iTunes which was syncing fine?

    Have you seen this?
    iPod appears on the Mac OS X desktop but not in iTunes.

  • IPod Nano shows on desktop, but not in iTunes

    I haven't used this iPod Nano with my G5 since it was new. Today I connected it, and it shows up on the desktop, but it doesn't appear in iTunes. I unmounted it and connected it again. each time I do that, it tells me it's detected a software update, but when I check, the dialog box tells me it's current.
    any help, please?

    Have you seen this?
    iPod appears on the Mac OS X desktop but not in iTunes.

  • Video ipod shows on desktop, but not in itunes

    hi.
    Recently installed some new updates, now itunes doesn't recognise my ipod. It appears on the desktop, but not in itunes.
    I have followed the 5 R's, tried a new user, different leads and USBs - nothing works. All software is the latest, and my ipod connects ok to my powerbook G4
    any ideas please, i am tearing my hair out!!
    thanks
    g4 imac 17"   Mac OS X (10.4.6)  

    Have you seen this?
    iPod appears on the Mac OS X desktop but not in iTunes.

  • V18 works on content viewer desktop, but not on iPad

    I am doing a farily complex show/hide MSO using v18 of the tools, it works great on the desktop viewer, but not on the iPad. The initial go to state xxx doesn't even work. Is this a known bug? What could be causing this?

    I think I tracked down what is happening:
    If I download the article/use the article in the middle of when the whole folio is downloading, the mso does not work. But if I wait for the entire folio to download it works fine. This is very strange. Even if I hit the home button after downloading an individual article then go back (while the folio is still downloading it works)

  • Ipod Nano3g shows on desktop but not in itunes?

    So ive tried the five r's excerpt for restore because it has to show in itunes to do so....ironic?
    So basically it plugs in and charges, but i cant add songs to do it or sync it to itunes;

    Ummm, ok.... hmmmm, this is on your Mac Mini, right? Older G5 Mini or a newer Intel Mini?
    This article...
    http://docs.info.apple.com/article.html?artnum=61937
    states...
    Certain models of single processor Power Macintosh G5 computers may show iPod nano mounted in the Finder but not recognized in iTunes. If this happens to you, try restarting your computer and Setting Energy Saver to highest performance and turn off hard disk sleep. If you have an iPod nano, but don't have a G5, then follow the other steps below.
    The other steps all seem to deal with earlier versions of OS X. You are using 10.5? (your system info changed from your first post to your last post, dropping the 10.5 info).
    Patrick

  • My Kingston usb is showing on desktop but not running in macbook pro with retina display...

    showing message : kingston is not spourting os x

    Its possible to replace it yes.   Its not easy, as you have to dissasemble the MacBook to get to it.
    The drive you want is not compatible.  The drive in current 2014 MacBoock Pro´s is not even a Sata type drive.  Its a PCie Blade type drive.
    https://www.ifixit.com/Guide/MacBook+Pro+13-Inch+Retina+Display+Mid+2014+SSD+Rep lacement/27849

  • External HD Time Machine partition shows in Desktop but not in Finder

    I have a External HardDisk with two partitions, one for Time Machine and other for Data.
    Until now when I power on the disk two icons appear on my MacBook, one Orange with a USB logo for the Data partition and other Green with Time MAchine logo for the Time MAchine partition.
    Suddenly when I power on in FInder I can see only the Data Partition. while in Desktop I can see both, but now the Time Machine Partition is orange with the USB logo (just like the Data partition).
    On the other hand everytinhg seems to be workning, I can acces both partitions and Time Machine apparently works Ok, but don't know if something is happening in the background, and I have all my data in that Disk!!!!!

    David Casillas wrote:
    I can see and use both partitions, but in Finder under DEVICES only DATA partiton shows.
    If a navigate in Finder to MacBook for example I can now see both partitions.
    Excuse me if my explanation of the subject is not clear. Here is a screenshoot of what happens. In the left you can see the Finder window with just Data Partition, on the right Desktop with both.
    If you haven't yet, from a Finder window's menubar, select +Finder > Preferences > Sidebar.+ Un-check the +External Disks+ checkbox, wait a moment, then check it again.
    Try going to TM Preferences, de-selecting the drive (select "none"), waiting a moment, then re-selecting it.
    Try deleting the file <your home folder>/Library/com.apple.Finder.plist and either relaunch the Finder (from the +Force Quit+ menu) or Restart.

  • Same link works on desktop BUT NOT on ipad -Help pls!

    Hello,
    I have created ONLY a desktop version of this site, www.frabricci.ca. When I check the link to the clients instgram account (seen on the home page instgram icon & last paragraph of that page, as well as last paragraph on contact page), its works on desktops and on mobile (iphone), yet when viewing the site on an ipad the link does not work. Confused to why this would happen as I've only created one site with the same link - HELP PLEASE!

    Hi
    I tried to check instgram account link from home and page and it works on iPad.
    Can you please let me know the browser details and OS details on iPad that you are using , also please check with different browser.
    Thanks,
    Sanjit

  • Apps show in itunes, but not on iPad (iOS5 Update)

    I updated to io5 last night on my iPad 1.  I have iTunes installed on a Win7 laptop.  I ran backup from iTunes which is good, because the update did not include my apps.  I ran "Restore from backup" from iTunes and it ran for a long time, and resulted in the last setup screens (location, iCloud, daily diagnostics), but still no apps on the iPad.  I can see them in the iTunes, though.  How do I get the apps from iTunes into the iPad?
    Thanks,
    Scott

    Forgot to mention - when looking at the "get info" section, none of the video codec information seems to be ported over. It appears as though the iPad cannot read the codec information.
    I have validated all codecs are fine - even iTunes has told me that the videos are already in the proper format. It's just the iPad which seems that it cannot read the codec/info.

  • All of a sudden I have a website that won't allow me to get into my account. I can on my desk top, but not my ipad.  Any ideas?

    All of a sudden I can't get into My Account on a website.  I can get in on my desktop, but not my ipad?  Any suggestions?

    How far do you get trying to log in?
    1. Will it not let you enter your username and password?
    2. Does it reject your known-valid username and password?
    2.1 Did you notice that it tends to uppercase the first letter of the username (possibly causing a mismatch)?
    2.2 Do you get the generic red "Please enter a correct username and/or password." message or something more specific?
    3. Does it accept them and take you somewhere useless or broken?

  • My ipod shows up on my desktop, but not in itunes 7.

    Let me start out by saying I've never had any itunes + ipod probems before. Everything has run smoothly up until now.
    Last week I upgraded my OS to 10.4.7 because I had been running on 10.2.8 since 2001 and itunes wouldn't let me download albums containing music videos. So I decided it was time for the upgrade. I also upgraded to itunes 7 and had been previously using itunes 6. This is when the problems started. Now whenever I plug my ipod into my computer with my firewire cord, my ipod shows up on my desktop, but not in itunes and I am completely clueless on what to do. No error messages pop up or anything. My ipod charges and that's about it. I tried doing the 5 R's, but none of that helps. I have a feeling it's itunes's problem and not my ipod's. I was thinking that maybe if I uninstall itunes 7 and re-install 6, everyting would work again; but I don't know how to uninstall itunes and I don't want to risk losing my library. I'd just like for itunes 7 to recognise my ipod and update it. Can anyone help me?

    My iPod is a click wheel...I think that's fifth generation?
    I've always used my firewire cable to update my iPod. I've tried using USB in the past but for some reason it always says that my iPod has low battery and won't let me update it, so I just use firewire. Can I not use firewire with itunes 7?
    I'll try using the USB again. It's laying around here somewhere. Just gotta find it.

  • "save optimized as" window in save for web shows desktop but not correct folder

    In "where", it shows desktop, with the icon of a folder, and not the name of the folder the picture is in, as is usual, if I cick on the pop down menu,{of the where field) at the bottom i am showing recent places in gray, and then the name of a folder which is on the desktop, but not the one the picture is in. I want to keep the picture in the same folder.
    I have been saving for web  no problem recently. i quit PS and shut the computer, nothing
    PS cs3 10 0 1
    in the save as window I have no problem

    There's another "drop down" in the save window. To the right of the file name (Save As: field), if you click that arrow, it will allow you to browse to ANY folder or location on the HD to save.

  • 3G iPod Shows up on Desktop but not in iTunes

    I am having the same problem with my 3G iPod. It has been working flawlessly for many years but I tried to mount it and update my songs and it will show up on the desktop but not in iTunes. It does show up in the system profiler. I reset the iPod via the updater and keypresses. I trashed the plist files for the iPod and iTunes. Still nothing. I switched my firewire cables to different ports. Nothing.
    What was strange was that Yami-pod does not see it as an iPod either so it is not just iTunes.
    My iPod shuffle works just fine and mounts right away in iTunes.
    This is on my eMac where I store my music. I have not tested it yet with the Macbook.

    I tried hooking the iPod to the MacBook and it worked like a charm. I then moved the iPod back to the eMac and I still had the same problem. At my whits end I decided to zap the PRAM with the Command-Option-P-R trick and to my surprise the iPod launched iTunes and started syncing when I restarted the eMac.
    I had no reason to think that there could be a problem with the PRAM as I did not have any other problems but it does seem to have been the problem.

  • IPod Mini is on the desktop, but not in iTunes

    I know a variation of this question has been asked a zillion times, but for some reason I can't seem to find the answer. Anyway, I'm a recent switcher to Mac and used my mini for years on the PC, but when I hooked up the mini to my new iMac it only shows up on the desktop, not in iTunes. However, when I plug it into the USB port it actually opens iTunes, but just doesn't show up. Anyway, I saw some other posts about running a restore via iPod Updater in the Utilities folder, however, there's no iPod updater in my utilities folder. Any help would be appreciated. Thanks!

    Any help here?
    iPod appears on the Mac OS X desktop but not in iTunes.

Maybe you are looking for

  • Compressor 4 will not open and I cannot purchase an update

    Compressor will not open on my computer because " you cannot use Compressor with this version of OS X."  I am using OS 10.9.4. I cannot find a software update for Compressor but the App store offers a recent version to buy. When I attempt to buy it,

  • Changing language for Voice Control

    I don't know what you guys think about it, but i like the new voice control feature very much. One tiny thing though: i use it in French, so it is perfect when i want to call one of my friend or dial a number, because i'd rather say my french friends

  • Visual Age 3.5 + windows 2000 + integration KIT 5.1 beta

    I can manage running Weblogic server in VA 35 integration kit with windows 2000. (it's work with NT4). I get the error immediately error : java.lang.unsatisfiedLinkError no server validator in java.library.path

  • OC4J Configuration - javax.naming.NameNotFoundException

    Here is a description of the problem we are having: The Problem      We have a remote client that wishes to invoke services that we are going to provide. These services will be accessible via a JNDI lookup from the client's JVM. The client, is operat

  • Full stock removal functionality for 201 movement type

    Dear Friends I am facing one problem with full stock removal. As per my requirement, system should remove full container to staging area there the requried qtty will remove and the remainging qtty goes to another storage type. When I post 201 movemen