Table of Contents webpart issue

Hi Everyone,
I have added a Table of contents webpart to the page(to display all lists, libraries & sub sites) and I have given the desired site url & set "No.of levels to 3". But I am unable to see any list, library or subsites in my webpart.(Also
I am unable to see the checkboxes "Show pages", "Show hidden sites etc.,) Please refer below screenshot
Can any one help me what might be the issue?
Regards,
Kumar.

Hi Kumar,
Table of Contents WebPart display site contents navigation according to navigation. From the screenshot you provided, are you using Managed navigation currently? In my environment, if I use Managed navigation and insert Table of Contents WebPart, the setting
of WebPart displays as yours.
Please go to site settings > Look and Feel > Navigation, switch to Structural Navigation and test the issue again.
Regards,
Rebecca Tu
TechNet Community Support

Similar Messages

Table of Contents Style Issue

I am a new user of InDesign 5 and am working with a Table of Contents that was prepared for me in my office. I have updated my text and inserted a few pages into my document and now have some odd formatting showing up in the TOC. I have deleted my text, added it back in, applied different styles and checked to be sure that I don't have any overrides applied. The issue is that the leader (....) seems not to be showing up for about 1/4 of my TOC entries. Any help would be appreciated.
Grainy (sorry) Image below (note items: Filter 4, Import 11, Export 21 as examples)
Thanks!

jclarke2,
You got verify all the styles envolved.
Try first verify this:
For each style included has to be similar like this example. The "entry style" can't be "[Same style]" like on the pic. You have to create one style and verify if don't have any tag besides the leader.
Good luck!

Table of Contents formatting issue

Table of Contents will not format properly when I change document margins. The TOC looked great until I had to adjust my left margin to 2inches for printing purposes. Now the page numbers are only a couple of spaces from each header, and it looks really bad. Is there an easy fix, so that I can adjust margins without screwing up the TOC formatting?
Thanks!

Thanks Jerrold,
I have certianly considered this an option if I can't get this resolved before I have to turn in my paper.
I bought Pages to write my thesis, espcially since I have to include a lot of capitoned images. I expected an Apple program to run smoothly and be intuitive, but it has been buggy at times, freezing up, and issues like the wacky TOC formatting from changing the margin size don't make sense.
Thanks again for your time.
RR

Table of Contents font issue

I have been having issue with font display in Table of Contents. Please take a look:
In iBooks Author:
In iBook when previewed, it is partially chopped off!
I can only got the font to display right when scale to a size like 36. There is no option to increase the text box height, moving the text up or down, or move to front does not solve the issue.
What do you think? Thanks!

Thanks for the help. But it does not work. There is no text box (only 2 points on side of text). The text height cannot be changed.
The text alignment is default to be top, but tried centre and bottom does not change anything (seems like there is no text box).

Table of Contents Slider Issues

I have been told by iBooks that on my iBook that I have published that when you look at The TOC (Table of Contents) in landscape mode the slider either doesn't move or it goes back to the first page (copyright page). Any ideas how I solve this?

Hi there
Good on ya for reporting. It's fine to sound disgusted. If
you don't tell Adobe they will never know and will blissfully
assume that everyone is pleased as punch with the changes.
Personally, because the TOC functionality was so limiting in
version 3 I just avoided it. As a result, I tended to largely
ignore it in the beta. What I did see seemed like a vast
improvement.
Keep in mind that a future release may also be an interim
update before a new major release.
Cheers... Rick

Modifying Table of Contents webpart

I am working on a site that is using managed navigation. the list looks something like this
Programs
Program 1
sub program 1
sub program 2
Progam2
sub program 1
sub program 2
Program 3
sub program 1
sub program 2
Currently using table of contents I can have it display in the following ways
Program 1
Program 2
Program 3
or
Program 1
sub program 1
sub program 2
Program 2
sub program 1
sub program 2
Program 3
sub program 1
sub program 2
I want it to display the following way
Program 1
sub program 1
sub program 2
Program 2
Program 3
does anyone know how you can modify the table of contents web part in order to display this way?
Thanks

Hi,
How do you implement your requirement so far? JavaScript in a Content Editor Web Part?
I suggest you provide your code about how to display as below for further research.
Program 1
sub program 1
sub program 2
Program 2
sub program 1
sub program 2
Program 3
sub program 1
sub program 2
Here is a blog for your reference:
http://www.n8d.at/blog/retrieve-managed-metadata-using-javascript-and-spservices/
Best Regards
Dennis Guo
TechNet Community Support

Table of contents issue

Hi ,
I am an XML publisher newbie. I looked around in the forums and couldn't find an answer to this. I am using XML Publisher 5.6.2. I created an RTF template and created the Table of contents section using Microsoft word. When I use this template to generate a rtf document, I am able to see the table of contents. But, the page number always shows up as 0. when I click on the link, it takes me to the correct location in the generated doc. But, there is no way to update the page numbers. Can somebody help?
Thanks!

Hi Vetsrini,
I tried exactly what you said. I put <?company?> as heading2 in a for loop. Once I added it , I updated the TOC (entire table). When the output is generated, I can see "Company1", "Company2" etc in my TOC. They are getting dynamically generated. But, the Page number still shows up as zero. When I click on them, it would take me to the correct location. But, the page number would show up as zero. I tried this from XML Desktop publisher (using preview). I also tried to generate it through a Java program by calling the APIs. The output is still the same. I have one more issue and I am not sure whether it is related to this or not. I am not able to display the page number in the generated output. I have defined it in the footer in my template. But, the output doesn't show the page number.
Thanks.

Table of Contents Issue/Question

Hi everyone, I hope I can put my question accurately into words.
I'm working on a 450 page product catalog in Indesign CS5 for the mac. The catalog has 7 main sections, in which there are numerous smaller sections. I need to create a table of contents for these smaller sections, however, my issue is this; my table of contents is based on the product names which I've applied a paragraph style to, but, also included on the same line that the product name is, are several small icons. I used the library function to put these icons into place. I put my curser where I wanted the icons to be, went to the library, right clicked on the icon I wanted, and selected place item. I found this to be the easiest way since there were approximately 1500 products in the catalog. So, my issue is, now that I'm creating a mini-table of contents for these numerous sections, the icons are included in my table of contents, which I don't want. I can manually go in and delete each icon, but I'm thinking there has to be a faster way. I thought of possibly a grep style but can't figure out how to make that work.
Any help would be appreciated! It's going to take a while to delete each one of those. I hope I've described this accurately; please feel free to ask any questions if it's not clear.
Thanks so much!
Annette

Oh my gosh, that did it! Thank you sooooo much!
I couldn't figure out how to choose just those characters because I hadn't designated them as anchored objects; that was throwing me, but I guess Indesign saw them as such.
Thanks again, you've saved me hours of work!
Sincerely,
Annette

Table of Contents Section Formatting Issues

Anyone have any ideas as to why this is happening in the Table of Contents? It seems that if I have more than 10 sections in a chapter that it pushes the info to the right side of the text box.
In section 10.10 all my text (for the title) is formatted to the left, and I can't figure out why the TOC is displaying it like this... pretty annoying...
Any help would be much appreciated.
Andrew

First off, thanks for the book K T, it's a great edition to my learning how to use iBooks Author, but it was no help. After playing around and becoming quite frustrated I started digging around in the the TOC I've figured out how to format the TOC a cross the entire book - getting rid of the formatting issue awonacott is experiencing. I too am (was) experiencing that TOC formatting issue. Here's what I did to rectify it:
1: Go into your TOC.
2. Go into any Section heading list and double click, then change the TOC to TOC Heading 1, 2, or 3.
For some reason the default TOC gets all wonky when you try to insert a section into an already created chapter. I was having this funny formatting happen to all sections of the iBook I'm creating, not just beyond the 10th section.
I refused to just deal with this crazy formatting, as I believe you should be able to add as many sections as you please without having to trim it down to fit within a 10 sections.
Anyways I hope this helps.
Semper Fidelis,
Tomas

Table of Contents issue in 11.1.2.1

Has anyone seen an issue with a book table of contents when generated in PDF Format. 11.1.2.1
On the side panel where each page is displayed there is a Table of Contents page listed but when you click on the report it does not show up at all. It is the 1st report. No Table of Contents.
Thanks.
Judy

Hi Judy,
I've seen the following bug, which sounds similar, at a client and the issue was fixed with patch set 107:
12800944 – The table of contents does not display and the page numbering is incorrect in a Complete Book in PDF.
Other book bugs fixed in patch 107:
12916617 – The page numbering in a Complete Book in PDF is incorrect.
13071627 - If a Book has page size set to Legal/Ledger/A3/A4, the complete book PDF's page numbering and Book TOC's (Table of Contents) Mapping are wrong.
12802465 - Complete Book in PDF returns a blank page with dots in 11.1.2.1.
12916552 – The table of content links navigates to the wrong report in the Complete Book in PDF.
I don't think it requires other patches to be installed (essbase, APS, Foundation, etc) however it will require re-installation of FR Studio and reconfiguration of the FR Print Server.
Hope this helps.
Cheers, Iain

I created a table of contents in Indesign CS4 exported it to a pdf format. Now having an issue in viewing it in full screen mode.

When I open the pdf document it is in full screen mode and when I click onto a table of content link it is full screen vertical but not full screen horizontal. How do I make it full screen both ways.

You are not making sense. Are you referring to the way the PDF is opened into your PDF reading application? If so, what has that to do with a 'table of contents'?
In any case, it seems not related to a problem with InDesign. Try the Acrobat forum instead.

Table of Contnts WP Issue

Hi All,
I have added a "Table of Contnts" webpart in a page with 2 levels.
Issue: Is there any way to modify the url's in this webpart for any particular link?
Please let me know if you have any queries.
Regards,
Kumar.

Hi Kumar,
According to your description, my understanding is that you want to modify the links in the Table Of Contents web part.
If I misunderstood please correct me.
How do you want to modify the links in the Table Of Contents web part?
Per my knowledge, the Table Of Contents Web Part automatically generates a site map that points to various parts of the site collection based on the settings and the links in the web part cannot be customized.
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Acrobat Pro 9.0 freezes when viewing/scrolling through the table of contents of a document

I am hoping someone can help me or has experienced the same problem I'm about to describe. I belong to the technical publications group of a fairly large company and I review a lot of PDF documents. I just installed Acrobat 9.0.0 (via CS4 Design Standard) and I've noticed on larger documents where there's a full page or several pages worth of Table of Contents, Acrobat 9.0.0 seems to freeze up when I begin scrolling through the TOC. For example, if I want to use the Text Edit tools or use a sticky note, when I press on an icon, Acrobat will freeze for a good 10 seconds, then will allow you to press the icon. It tends to freeze each time I want to make my next edit or even pressing the up/down arrow buttons to go to the next page. Once I get through the TOC pages, Acrobat seems to function normally--no freezes.
Has anyone experienced this? Would appreciate any kind of advice on how to fix--perhaps there's a patch or update?
I didn't experience any of this using Acrobat 8.0--I never had any real problems with Acrobat until 9.0.0.

Your issue may not be related to a difference between v8 and 9.
I have not had this problem on my computers, but a coworker had this issue. For many documents that others were able to open and scroll through without issue, his computer was freezing and unfreezing. IT determined his graphics capabilities were not able to keep up with the requirements of working with larger documents and gave his computer a RAM upgrade and a new graphics card. Particularly during scrolling, higher demands are made on the computer to graphically render and re-render page content. Documents giving him problems before became a non-issue.
A new graphics card is obviously a $$$ solution, but you might want to check to see if your RAM meets the minimum requirements and check to see if there are any program updates (Help > Check for Updates).
I have had an issue of pdfs freezing, but not specifically in the table of contents areas. If your document has pages with images that have an unusually high number of layers, it may affect the ability to work effectively in the document.

Table of Contents is not working in Pages 5.0?

I am attempting to find a solution to this TOC issue, in Pages 5.0:
The INSERT>TABLE OF CONTENTS sub-menu is grayed out.
I have formatted with custom styles and am using landscape format.
In the Pages '09 it looks so simple to insert a Table of Content.
Is this an incompatibility issue?

Hello pmpope,
The process for adding a Table of Contents in the new version of Pages has changed somewhat. The following article provides step-by-step directions for setting one up.
Pages Help for Mac - Add a table of contents
http://help.apple.com/pages/mac/5.0/#/
Cheers,
Allen

Span columns problem with Table of Contents order

Hello,
I'm having a strange issue with headings that span columns and Table of contents order. My document has a heading paragraph in a coloured box, which is then inserted in-line into a 2-column text box. The paragraph style for the box (set to in-line) is set to span all columns, so that the 2-columned text doesn't get messed up.
When I create a table of contents, the Heading style that is inside the coloured box is being picked up fine, but even though it is inserted before the headings below it, it is showing up after the level 2 headings, instead of before.
I have confirmed that the insertion of the blue bar is before the text below it, as when I remove the span columns option, the TOC works as it is supposed to. Is this a bug?

Hi there, thanks for the reply.
The only way I could move the inline box to the left was to make a custom anchor and change the X value, this did not affect the TOC unfortunately. I also checked the location of the invisible marker indicating the location of the inline text box, and it is definitely before the heading that follows. I confirmed this by removing the span columns option for that paragraph, and the TOC displayed properly after doing that, meaning there is likely some problem with the span columns option not properly recognizing the order of content.
Regards,

Table of Contents webpart issue

Similar Messages

Maybe you are looking for