Table of Machine hours in PP

Hi all ,
I want to know in which table we can find the information related to machines used to produce an FG or SFG ( Like how many mins the machine was run and what is the cost for that ) .
I can find this in the Tcode KOB1 . But its giving me a structure when i press F1.
I have use sql trace to find the table , but its not useful. Can any body pls advice me how can i get the table .
Thanks in advance.
Sandeep.

Well, thanks for the thanks.
I think this might be a font issue. Any new fonts used? Perhaps a corrupt style, maybe.
If chapters 1-20 work, it sounds like the problem is in Chapter 21, but you say you can generate a TOC in chapter 21 as a standalone.
Windows can be hard to troubleshoot because it doesn't give helpful crash reports. Perhaps back up everything, then try synching the styles again. Not sure it you should try using a source from the front, or chapter 21, though.
I'd also try exporting all stories from chapter 21 to InDesign Tagged text, then create a new file and place the tagged text on th pastebaord. Copy and paste that into new text frames on the pages (this is probably not required, but is one more cleaning step and I have seen cases where it mattered). Replace chjapter 21 with the new file in the Book.
Also check out Troubleshoot font problems | Windows

Similar Messages

Actual Cost Machine hours is zero (After confirmation)

Dear Guru,
We are implementing PP module and product costing. We enter the budget with activity type in KP06 & KP26. After confirmation, the actual cost in machine hours is zero but not in electricity or steam. Why the actual cost is zero in activity type machine (we enter the actual qty machine hours) ...
May you assist me to solve this issue
Thanks
Maju S

Dear Umapathi G & Shaubhik
Thanks for your replay.I have checked the Control key is marked for costing and the cost center is assigned correctly and we have executed the KPSI before and I found the fixed price for Machine hours in tcode KSBT and cost center is not locked for posting secondary CE
For additional information, we have 3 activity type, Machine hour, Electricity and steam. The actual cost for electricity and steam are not problem, only for actual cost activity machine is zero. The issue only for activity type for machine.
May you have me to give the other solution to be checked
Thanks for your replay and I am really appreciate it
Maju S

Where do I change rates for labor and machine hours?

Hi,
I have fixed rates for labor and machine hours. Where can i change them? I can't find it anywhere.....

Hi
Please check if you can maintain with transaction KP26 per Costcenter / Activity type
Cheers
Tim

Analyze table hangs for hours

Hi,
Analyze table hangs for hours (more than 6 hrs) using DBMS_STATS.GATHER_TABLE_STATS.At last we killed the session and then rerun it.it runs succesfully completed.
Why DBMS_STATS.GATHER_TABLE_STATS hangs for hours for some time?
is this issue arise due to the GATHER_STATS_JOB schedule or any other issue?
please help me.
Thanks,
Michael Holding

holding wrote:
Analyze table hangs for hours (more than 6 hrs) using DBMS_STATS.GATHER_TABLE_STATS.At last we killed the session and then rerun it.it runs succesfully completed.It could have been waiting on a locked table when killed. And then when restarted, it could have found the table unlocked.
Why DBMS_STATS.GATHER_TABLE_STATS hangs for hours for some time?As Boneist said.. the wait states and events of the session would have shed light on that.
is this issue arise due to the GATHER_STATS_JOB schedule or any other issue?Dunno... insufficient data to accurately compute. (except for making guesses like above with table being locked and then unlocked)
please help me.Don't kill a "+stuck/hung+" session before looking at what it is busy with (events) and what it is waiting on (wait state)?

Machine Hours

Hi Guruu2019s,
Currently in one of our plants in Czech Rep we are costing material in local currency (CZK) but the activity types/ machine costs are set up in USD.
So when GR for finished goods are produced, the absorption is using the machine hour costs in USD and the conversion / exchange rate used is kinda weird.
We are now trying to set up the MACHC in SAP in CZK (because all the budget calculation leading to MACHC for the year are also done in CZK). This will be more transparent for any analysis and for absorption too and would avoid any eventual discrepancies coming from any exchange rates.
We use the transaction KP26 to input the total capacities for the production lines in hours and to put MACHRC per hour for every production line.
In KP26 if you go to settings - set planner profile. We are currently using planner profile SAPALL. I noticed a couple of profiles were set for local currency. So I tried to use both of the layouts.
I first changed in KP26 the machine hour costs for Cost Center XXXX from 1315,35 USD to 100000 CZK.
As example I can used a product YYYYYYY, which is a pebble product produced on Cost Center XXXX. The Machrc calculated in the Std price for this product before I made the change were 458,64 CZK / 100 Eas.
After this change took place the cost for Activity type in KP26 this increased the Machc calculated in the Std price for this product to 573,34 CZK / 100 EAs.
I thought that the calculation should be: (Machrcosts for 1 hour for the CC) * (routing for 100 EAs) = (Machcosts for 100 EAs)
Before I changed the layout example :
1315,35 USD * 1,058 MIN = 458,64 CZK/100 EAs
(don`t know which exchange rate is taken from here u2013 because when I take 23530,48 CZK displayed in KP27 as converted value for 1315,35USD the result should be 414,92 CZK/100 EAs)
After the change I am getting:
100000 CZK * 1,058 MIN = 1763,33 CZK/100 EAs
But if i gt to that material YYYYYY and look at the cost tab the calculation is 573,34 CZK/100 EAs.
Do you have any idea, what could be the issue? Maybe some additional changes must be done in KP26 and KP27 after changing the layout not just the overwriting of the value Machrcosts?
Thank you in advance for your time and help.
Best regards
Yasmeen
Edited by: YasmeenBhatt on Dec 30, 2009 3:42 PM

Hi Thess,
Just to make a point, I suggest you to do planning KP26 and KP06 and run KSPI to get the activity prices. If you do this, it not only serves your purpose of maintaing activity prices, but also, helps you in getting the variance reports and cost center level.
Now, if the activity prices of depreciation and other overheads need to get multiplied by the no. of machine hours, (obviously there must have been one activity "machine hours" to capture the production cost), you can create seperate operations (dummy operations with dummy work centers and dummy activities assigned to them) for these overheads. (even you can use all the activity types in the same work center in the same operation).
Once the user confirms the activity "machine hrs" (with 5 hrs for example) for operation in CO11N, the same number of hours can be defaulted for other operations also...(like depreciation etc in your case).
Pls talk to your PP Consultant to do this.
Srikanth Munnaluri
Edited by: Srikanth Munnaluri on Mar 8, 2009 11:57 PM

Audit Events (Audit Events) are being written to ADS_EVENTS table are 12 hours off

All of my events being logged are 12 hours into the future. Is there a local setting that BO 4 uses to determine the local time zone? Or some other setting, which it uses to determine local time?

Kenneth,
By default, the events are generated in GMT-0 timezone to allow distributed environment with machines in different timezones to record a coherent time.
You can add a formula in your reports to adjust to your timezone.
Regards,
Julian

Labor Hours and Machine Hours

Hi everyone,
Our manufacturing operation involves injection molded parts that have labor time and machine time structured. As operations department, we receive a daily schedule per molding machine we have but such schedule shows only the amount of parts to be produced and not its equivalent in machine and labor hours based on its routings. Basically we receive a list of Planned Orders to be produce in a daily basis with parts only.
In a previous experience in Oracle there was a report showing the order, parts, labor time and machine time requiered.
Is there a report in SAP that can reflect the same data?
Currently we are looking up into a routings spreadsheet but the problem is that is not accurate because routings may change for multiple reasons.
Thanks.
JB

Jorge,
This is possible in SAP also. But this needs enabling PP and timebooking functionality in HR.
In PP along with CO, the machines or the PRT are created as cost centers and teh costs will accrue to these cost centers. Similarly teh cost of the materials can also be accrued on a cost center. The labour hours can be captured by means of timebooking and linking every employee to a work center whichis again linked to a cost center. If these functionalities are enabled, then it is possible to see all the costs, activities and schedules used for an order, may it be production order, assembly order, or a service order.

CAT2: In which table are targed hours stored?

Hi to anybody!
I am wondering, since last week (in the transaction CAT2), Which table can I retrieve the target hours values to every day In?
This values are the same to every Personnel Number and Cost Center BUT no idea about it.
The additional info I'm sure will be a plus form me.
Thanks a lot!
Moderator message: duplicate post locked.
Edited by: Thomas Zloch on Feb 6, 2012 8:16 PM

- Do you refer to the planned working time from the personal work schedule or the dayu2019s attendance times if you work with time evaluation (Both managed in HR Time Management) - Ask HR functional.
- From a more programming point of view, you could look at function modules like BAPI_TIMEAVAILSCHEDULE_BUILD.
Regards,
Raymond

HR tables that store hours worked on holidays

Hi All,
I am trying to calculate the number of hours an employee worked on holidays in a payroll period.
Can anyone give me the name of tables in HR that store the number of hours worked on hoildays?
Thanks in Advance..
Sonali.

Check with below Tables :
View : V_T559P
Tables : T511K
T510s
Thanks
Seshu

Inserting into table takes several hours

Hi All,
A table has a composite index with unique as Y, logging as YES, degree as 1. There are three columns for this index. Inserting into these columns in the table takes hours. Even for 3 or 4 hours, only 10 records or so get inserted.
The number of extents for this index is 84. Would that be a problem for this performance issue? Please advise bcos it is quite urgent. Many thanks.

Welcome to the forum!
First read this:
Smart Questions: Urgent
Then check out these:
{message:id=1812597}
{thread:id=863295}
Post back with the information identified above and we can try and help you further.

Time Machine hourly backup seems a tad large

Hi all
Occasionally, my hourly Time Machine incremental backups to my Time Capsule seem a tad large. One hour the backup is a sensible size, then an hour later, when I've been doing very little on my machine, the backup is massive (as in, several gigabytes).
Not only that, but the backup seems to grow in size as its happening. the pictures below should help illustrate.
The backup is listed as being 719MB, only an hour after a more modest backup. Time Machine seems to be claiming that is has transferred all of the required backup:
!http://img6.imageshack.us/img6/4988/picture2gih.png!
But then, only two minutes later, see how the situation has changed:
!http://img5.imageshack.us/img5/3739/picture3m.png!
And the situation continues:
!http://img87.imageshack.us/img87/9339/picture5.png!
Any ideas? This issue happens intermittently (although it is happening now... that last image was taken a few minutes ago and the backup was still going - up to 3.1GB - before I told it to stop).
I'm not certain if Time Machine is actually transferring this amount of data to the Time Capsule or not.
Cheers.

Hi,
I had the same problem today as well. The last backup was done this morning at 2 a.m. When I turned my PowerBook G4 on again this afternoon, the backup size continually grew, just like on your machine, Rob. I aborted the backup a couple of times, deleted the inProgress file, but it always got bigger and bigger. After downloading Time Machine Buddy and Time Tracker, I just let Time Machnine "do it's thing". Luckily, I had enough free space on my WD MyBook 500 GB I use for the backups, because it stopped only at 24.8 GBs, after initially displaying 61,3 MB in the menu bar, and requesting 1.05 GB according to Time Machine Buddy.
Time Machine Buddy protocol:
Starting standard backup
Backing up to: /Volumes/My Book/Backups.backupdb
No pre-backup thinning needed: 1.05 GB requested (including padding), 32.74 GB available
Copied 139261 files (24.8 GB) from volume Macintosh HD.
No pre-backup thinning needed: 1.16 GB requested (including padding), 7.36 GB available
Copied 7042 files (2.0 MB) from volume Macintosh HD.
Starting post-backup thinning
Deleted backup /Volumes/My Book/Backups.backupdb/Claas Olthoffs PowerBook/2009-03-05-202501: 7.36 GB now available
Deleted backup /Volumes/My Book/Backups.backupdb/Claas Olthoffs PowerBook/2009-03-05-192342: 7.37 GB now available
Deleted backup /Volumes/My Book/Backups.backupdb/Claas Olthoffs PowerBook/2009-03-05-123736: 7.37 GB now available
Deleted backup /Volumes/My Book/Backups.backupdb/Claas Olthoffs PowerBook/2009-03-05-113526: 7.38 GB now available
Post-back up thinning complete: 4 expired backups removed
Backup completed successfully.
So I took a look at Time Tracker to see what was backed up. I was suprised to see, that the biggest chunk was my Macintosh HD/Library/Application Support folder. This folder is 23,9 GB in size, mainly because it contains Final Cut Studio media and templates. Time Machine backed it up completey. This seems weired, because none of the files I looked at in this folder were changed during the last couple of months, if not the last year, since I installed them. I don't know why Time Machine would backup all of those unchanged files.
For the sake of completeness, the external drives contains other, non-backup, files as well.
I hope this gives you some more information to work with Pondini.
Greetings,
Claas

Pivot table (Year, Day, Hour)

Hi there,
I was wondering how do i simulate the pivot table concept if the variables are Days in the year or Hours in the year.
My table have columns
create table mytable(
keycol_onenumber(2),
keycol_two number(2),
keycol_three number(2),
keycol_four number(2),
keycol_five number(2),
year number(4),
day number
hour number(12,5),
values number(10,5));
Now for change in each keycolumn, and then for the day in the year or hour in the year i have to print values in the next line.
I looked at some of "asktom" articles which talks about using decode , but i don't think i can do that.
Can anyone suggest me ideas as to how to proceed.
THanks a bunch and have a great day.

I admit 7th column is null XOR 8th column is null
if you need 8700 columns, you can use 8700 decode.
SQL> with tbl as
2    (select 11111 c1, 11 c2, 222 c3, 4444 c4, 1 c5, 2006 c6, 200     c7,null c8, 1.2 c9 from dual union all
3     select 00001 c1, 10 c2, 555 c3, 7777 c4, 2 c5, 2006 c6, 121 c7,null c8, 2.3 c9 from dual union all
4     select 12121 c1, 9 c2, 111 c3, 1111 c4, 1 c5, 2006 c6, null c7,2333 c8, 1.1 c9 from dual union all
5     select 11111 c1, 11 c2, 222 c3, 4444 c4, 1 c5, 2006 c6, 100 c7,null c8, 1.2 c9 from dual )
6 select
7      c1,c2,c3,c4,c5,c6,
8      decode(
9          case when c7 is null and c8 is not null then 1 when c7 is not null and c8 is null then 2 else 3 end,
10          1, 'HOURS',
11          2, 'DAYS',
12          'N/A') type,
13 max(decode( case when c7 is null and c8 is not null then 1 when c7 is not null and c8 is null then 2 else 3 end, 1, decode(c8,0,c9), 2, decode(c7,0,c9))) m0,
14 max(decode( case when c7 is null and c8 is not null then 1 when c7 is not null and c8 is null then 2 else 3 end, 1, decode(c8,100,c9), 2, decode(c7,100,c9))) m100,
15 max(decode( case when c7 is null and c8 is not null then 1 when c7 is not null and c8 is null then 2 else 3 end, 1, decode(c8,121,c9), 2, decode(c7,121,c9))) m121,
16 max(decode( case when c7 is null and c8 is not null then 1 when c7 is not null and c8 is null then 2 else 3 end, 1, decode(c8,200,c9), 2, decode(c7,200,c9))) m200,
17 max(decode( case when c7 is null and c8 is not null then 1 when c7 is not null and c8 is null then 2 else 3 end, 1, decode(c8,2333,c9), 2, decode(c7,2333,c9))) m2333,
18 max(decode( case when c7 is null and c8 is not null then 1 when c7 is not null and c8 is null then 2 else 3 end, 1, decode(c8,8783,c9), 2, decode(c7,8783,c9))) m8783
19 from tbl
20 group by c1,c2,c3,c4,c5,c6,
21          case when c7 is null and c8 is not null then 1 when c7 is not null and c8 is null then 2 else 3 end
22 /
        C1         C2         C3         C4         C5         C6 TYPE          M0       M100       M121       M200      M2333      M8783
     11111         11        222       4444          1       2006 DAYS                    1.2                   1.2
         1         10        555       7777          2       2006 DAYS                               2.3
     12121          9        111       1111          1       2006 HOURS                                                    1.1but it is going to be very slow.
you could also use a plsql function which returns a clob, or you could use xquery (XML) if you have a recent version of Oracle

Update table after every hour

Hi friends,
I want to write a database trigger, function or a procedure that fires after every hour. check a certain condition and if satisfied update records of the table.
How can i do this????
Pliz help
mirza Imran Baig

If you have access to this site you have access to the documentation: there's a link from the OTN home page. For your convenience, here is the link to the DBMS_JOB docs: http://download-west.oracle.com/docs/cd/B10501_01/appdev.920/a96612/d_job.htm#999107
You don't say which version of the database you have - this the 9i docs, but the 817 docs are also on OTN. Besides, I don't think DBMS_JOB has changed much.
Cheers, APC

Time Machine Hourly Back Up - How can I Disable

Even though I have Time Machine swicted off at the toggle it continues to back up every hour
I have a MAc Mini and a 1TB external hard drive atatched. Despite wswitching off the toggle the hard drive is three quarters full of back ups.
I agree a back up is good but there is now too much - I dont make that many cahnges.
How can I stop this hourly back up and - as I thought I could by switching the toggle off - simply back up mnually?
Also wjhat about when I upgrade to Moutain Lion?
Thanks

- If you used PhotoStream then try getting them from your PhotoStream. See that topic of:
iOS: Importing personal photos and videos from iOS devices to your computer
- Maybe from the restored iPod via How to perform iPad recovery for photos, videos
Wondershare Dr.Fone for iOS: iPhone Data Recovery - Wondershare Official
http://www.amacsoft.com/ipod-data-recovery.html

Time Machine- hourly (then why does my external gear up more often?)

Time Machine is a beautiful thing. It kicks off every hour.
Then why does my external HD come alive more frequently? It seems to come on every 10 mins or so for a few minutes - and I don't know what it's doing. (It's not performing a TM backup.)
Thanks!

The operating system or other apps, when there's a need, checks mounted drives/partitions. For example, I have a file utility that, when invoked, polls the drives. This wakes my drives, even those on a server in which one of its drives is mounted on my Mac.

Table of Machine hours in PP

Similar Messages

Maybe you are looking for