Table of messages in programs

Hi, Experts.
I'm looking for the table that contains messages used in programs.
For example, table having following information would be great!
PROGRAM NAME    MESSAGE ID    MESSAGE NO
ZXXXX                    PO                    000
ZXXXX                    PO                    001
I know D010INC has Include Programs used in programs.
I'm looking for exactly like D010INC, but for messages.
If you know that kind of table, please let me know.
Thanks in advance.
Sally

Santosh
Thank you for your reply.
I meant I need ProgramID that the messages using.
Do you know that kind of table?
Thanks.
Sally.

Similar Messages

Field WTGBTR not contained in nametab for table CE1E_B1 / Message no. KE543

Hello,
In a new sandbox, when I'm trying to maintain values for user defined characteristics using KES1, it says it cannot find the maintenance dialog for the table T20XXX.
Accordingly I executed the program - RKEAGENV to regenerate views for all user defined characteristics, but while doing same, I'm getting the below error, and it comes out.
Field WTGBTR not contained in nametab for table CE1E_B1
Message no. KE543
I have no reference to that field either in COPA data structure.
I have re-generated/re-activated COPA and executed RKEAGENF and also tried executing RKEREOFC. But still with permuations all these, the error persists.
May you please help
Thanks
Balla

Hi,
If you get error msg KE543 i.e 'Field ... not contained in nametab for table CE1E_B1' then (even if you don't use E_B1)
Run report RKEAGENF for banking template operating concern E_B1.
The selection fill up as follows:
Operating concern: "E_B1"
Structure: leave blank
Type of CO-PA: "1"
Refill? : "X".
Then a run of report RKEAGENV should proceed successfully.
regards
Waman

Field WTGBTR not contained in nametab for table CE1E_B1 / Message no. KE54

Hello,
In a new sandbox, when I'm trying to maintain values for user defined characteristics using KES1, it says it cannot find the maintenance dialog for the table T20XXX.
Accordingly I executed the program - RKEAGENV to regenerate views for all user defined characteristics, but while doing same, I'm getting the below error, and it comes out.
Field WTGBTR not contained in nametab for table CE1E_B1
Message no. KE543
I have no reference to that field either in COPA data structure.
I have re-generated/re-activated COPA and executed RKEAGENF and also tried executing RKEREOFC. But still with permuations all these, the error persists.
May you please help
Thanks
Balla

Hello,
You try follow the instructions in SAP note 872175 and apply solution of the SAP note
942785 in order to successfully run program RKEAGENV i.e run the program
RKEAGENV in the debug mode and set the parameter no_jb to 'X'.
It is not enough to just apply the coding corrections in the notes.
You also need to follow the instructions mentioned in both the notes.
1. Activate and Execute report ZJBREOFC
2. Run report RKEAGENF for banking template operating concern E_B1.
   The selection fill up as follows:
     Operating concern: "E_B1"
     Structure: leave blank
     Type of CO-PA: "1"
     Refill : "X".
Then a run of report RKEAGENV should proceed successfully.
Regards,

Running 10.6.8. Trying to open and view contents of a CD (of an MRI) and getting message 'This program cannot be run in DOS mode' Is there a way? Thanks for the help.

Running 10.6.8. Trying to open and view contents of a CD (of an MRI) and getting message 'This program cannot be run in DOS mode' Is there a way? Thanks for the help.

Go to the support site for the provider of the MRI software.
Sounds like it windows/PC. I have ran across that for the CDs that veterinarians provide for digital x-rays.
I would try on a PC or on yuur Mac with Windows via BootCamp or a virtual machine like VirtualBox

Error message "This program cannot display the webpage when uploading images to Cafe Press

I have had a Café Press shop for five years and except for sometimes being slow, no problems uploading images. Now, suddenly for 3 days I get the message "This program cannot display the webpage
Most likely causes:
• You are not connected to the Internet.
• The website is encountering problems.
• There might be a typing error in the address.
What you can try:
Check your Internet connection. Try visiting another website to make sure you are connected.
Retype the address."
I got the messsage about half way through the uploading of an image. People suggested using "firefox" instead of IE so I now get a similar error message from Firefox. I signed in, clicked on the image I wanted to upload and hit "upload" and get message as follows:
Server not found
Firefox can't find the server at members.cafepress.com.
* Check the address for typing errors such as
ww.example.com instead of
[url=http://www.example.com]www.example.com[/url]
* If you are unable to load any pages, check your computer's network connection.
* If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web.
None of this makes sense because I WAS connected to the internet (obviously) or I wouldn't have been able to sign in, go to my media basket, browse for the image and click "upload" and watch as the progress bar showed percentage of upload such as 20%, etc. and even went to 100% at times before giving me the error message. Plus I couldn't make a typing error since I wasn't typing anything but uploading an image. Any suggestions?
Whatever your suggestion, I need step by step instructions as I am totally computer illiterate. I don't even know what a "proxy" is and don't know if I have a "firewall" as the message suggests. I have "Comodo" security and am using Windows XP.
I contacted CP which was no help at all. All they did was tell me to clear my cache which I do after every session. Thanks
Nancy
http://www.cafepress.com/calendarflr

Sounds like your desktop application is in fact running from
a server. CHMs were identified as a security risk by Microsoft and
are best suited to the user's PC.
Click
here for more information.

I was told to update iTunes. The update failed. Now I can't open iTunes but get the following messages: The program can't start because MSVCR80.dll is missing from your computer. Try reinstating the program to fix this problem. Then I get iTunes was not

I was told to update iTunes. I did and it failed. Then every time I tried to open iTunes I get the following message: "The program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem." Then I get the following: "iTunes was not installed correctly. Please reinstall iTunes. Error 7 (windows error 126)." I have uninstalled and installed iTunes a couple of times with no luck. I cannot even access iTunes support

Troubleshooting issues with iTunes for Windows updates - MSVCR80

When opening iTunes I continue to get the same messages, 'The program can't start because AVFoundationCF.dll is missing' and 'iTunes was not installed correctly. Error 7 (Windows error 126)' I've uninstalled, reinstalled many times - nothing! help please.

When opening iTunes on my new Windows 7 PC I continue to get the same messages, 'The program can't start because AVFoundationCF.dll is missing' and 'iTunes was not installed correctly. Error 7 (Windows error 126)' I've uninstalled and reinstalled many times to no avail, even tried it on a different user account and still nothing. I recently installed Panda Internet Security 2012 (about 12 days ago), initially iTunes worked fine as usual but within the last few days I've been unable to open it with the same messages appearing. I've read through some of these pages and tried everything that's been advised, uninstalling and reinstalling while internet and laptop security is swithched off, downloading tools to completely remove anything related to iTunes, tried it in Safe Mode, nothing has worked. I've also noticed that in the start menu when I click on iTunes, it says '(empty)' where it should have the logo and ability to start the program, does this mean it doesn't download + install properly each time I've tried? Any help would be enormously appreciated.

Doublechecking. Have you also tried the following user tip?
Troubleshooting issues with iTunes for Windows updates

Error message c:\program files (x86)\itunes\ituneshelper.exe r6034

can not log into itunes, get the following error message: c:\program files (x86)\itunes\itunes help.exe
R6034
I have uninstalled and reinstalled and still unable to login

Apple's advice on this issue can now be found here: TS5376: iTunes 11.1.4 for Windows: Unable to install or open.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See the user tip Backup your iTunes for Windows library with SyncToy for a suggested strategy.
If you have difficulty downloading the iTunes setup file try clearing your browser's cache or using an alternate browser.
If content is missing from the library following the repair see Empty/corrupt iTunes library after upgrade/crash.
For device connectivity issues following the repair see TS1538: iOS: Device not recognized in iTunes for Windows, in particular section 5.
MobileMe is a discontinued service and should be removed if present. See HT2992: MobileMe: Uninstalling the MobileMe Control Panel for Windows for details.
tt2

Getting Err : An error occurred in the message processing program.

Hi, Im wrking with Smartforms.
I have assigned output type LD00 ,with driver prgrm name and Smf name.
after that executing with VL03N , its giving error .
Output could not be issued
Message no. VL086
Diagnosis
An error occurred in the message processing program.
Procedure
Contact your system administrator.
...Actually i have orginal prgrm (zsmf_Orginal) there i had to do some modifications , so after copying that same form into another form(zsmf_Duplicate), i made some changes there, both form are executing in T code SMARTFORMS, but while testing with VL03N , its showing above mentioned err.
Plz have eye on it.
<removed by moderator>
Regards
vivek.
Edited by: vivekd358 on Jul 10, 2010 7:35 AM
Edited by: Thomas Zloch on Jul 12, 2010 11:35 AM

closed

How to get data from an internal table in some other program

I would like to get data from the internal table in the other program. When I using FM "LIST_FROM_MEMORY" to get the data, it doesn't work and the exception is not fount.
If any special code need in the other program, like write data to memory .
Many thx .
From Ross Wang

Hi
<li>You need to have interaction if you want to use EXPORT/IMPORT statments.
<li>The internal tables in both programs must be same
<li>Program one ..Calling program
REPORT ZTEST_NOTEPAD.
DATA: BEGIN OF it_t001 OCCURS 0,
        bukrs TYPE t001-bukrs,
        butxt TYPE t001-butxt,
      END OF it_t001.
START-OF-SELECTION.
SUBMIT ztest_notepad1 AND RETURN.
IMPORT it_t001 FROM MEMORY ID 'ZTEST_T100'.
LOOP AT it_t001.
    WRITE:/ it_t001.
ENDLOOP.
<li>Program two ...Called program
REPORT ztest_notepad1.
DATA: BEGIN OF it_t001 OCCURS 0,
        bukrs TYPE t001-bukrs,
        butxt TYPE t001-butxt,
      END OF it_t001.
START-OF-SELECTION.
SELECT * FROM t001 INTO CORRESPONDING FIELDS OF TABLE it_t001 UP TO 10 ROWS.
IF sy-dbcnt > 1.
    EXPORT it_t001 TO MEMORY ID 'ZTEST_T100'.
ENDIF.
I hope that it gets you some idea.
Thanks
Venkat.O

I am trying to reinstall Windows on my macbook pro. I downloaded the support files and Windows 7 iso file to a USB drive. However, when I try to run the setup.exe program I get the message "this program cannot be run in DOS mode."

I am trying to reinstall Windows (would not launch). I removed the partition and started over. I downloaded the support files and Windows 7 iso file to a USB drive. However, when I try to run the setup.exe program I get the message "this program cannot be run in DOS mode." I was successful before, what am I doing wrong this time?

Try a restart.
If that doesn't fix the problem, shut down the computer and then power it back up. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application unistaller. For each disable/delete, you will need to restart if you don't do them all at once.
Safe Mode
Safe Mode - About
General information.
Isolating issues in Mac OS X
Troubleshooting Permission Issues
Step by Step to Fix Your Mac

When i click on the Firefox icon I get an error message, C:\Program Files\Java\jre6\lib\deploy\jqs\ff\..\..\..\..\bin\jqsnotify\.exe cannot be found. What is it? and how do i fix it? in English

When i click on the icon to open Firefox an error message box appears with the following message, C:\Program Files\Java\jre6\lib\deploy\jqs\ff\..\..\..\..\bin\jqsnotify\.exe cannot be found. It then advises me to use the Search function, but the search function says it is unavailable.
What is it? and how do I fix it? in English

See:
http://www.java.com/en/download/help/quickstarter.xml - What is Java Quick Starter (JQS)? What is the benefit of running JQS? - 6.0

When opening PS CC 2014 I get message "The program can't strt because ONCoreFoundation8.dll is missing from your computer. Try reinstalling the program to fix this problem". I did and still get same message.

when opening PS CC 2014 I get message "The program can't start because ONCoreFoundation8.dll is missing from your computer. Try reinstalling the program to fix this problem". I did and still get same message.

Win 7 64bit, have PS cs6, pscc. pscc2014. also Lightroom 5.5 (just upgraded to 5.6). Also the latest updates for all Adobe programs. But still get
But the program does start and seems to work well. But annoying as hell!!!
Also don't understand why there is pscc2014 rather than just updating pscc??
Thanks,
Bob Lurie

Despite unistalling and reinstalling iTunes, I can't load the program. The error message "the program can't start because MSVCR80.dll is missing from your computer."

Despite trying to unistall and reinstall iTunes, I continue to get the message "the program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem."

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99385)

HT1349 I am unable to install iTunes. I'm receiving an error message: "The program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem." I've unistalled and attempted to reinstall several times.

I am unable to install iTunes. I'm receiving an error message: "The program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem." I've unistalled and attempted to reinstall several times. I keep getting the error message to reinstall to fix the problem.

See if this post from turingtest2 fixes it : https://discussions.apple.com/message/24620553#24620553

Table of messages in programs

Similar Messages

Maybe you are looking for