Table - or Chart - with Links

If my table were merely text, I read where we can simply make a .jpeg of it, and post that graphic on an iWeb page.
But I would like to create a table - or chart - of some links, followed by short descriptions.
Any ideas?
Clint Bradford
Mira Loma CA

Clint:
If you create the table/chart in Pages I believe you can put in the links and then copy/paste the objects onto an iWeb page. I did a test of a Pages newsletter type of layout with links and it worked. I just did a Copy All (Command+A) of the Pages layout and pasted it into a blank iWeb page.
You can see it here: Pages2iWeb . I don't think you can do it with Numbers.
OT

Similar Messages

Limiting Tables and charts with Measures having RelativeValue

Hallo,
I just try to do some difficult stuff with the WebI Rich Client 4.1.
There are two measures for each month on a time line showing year and month. Thus, I have a dimension for year and month and two different measures for each year/month combination.
Now, e.g. I want to compare these two measures having same month and different years, say the current year and the year before. Please see the table below for a visible figure.
I used RelativeValue([measure prior year_1];([year/month]);-12) for [measure prior year] in order to compare one 1 year older measure with the other measure.
year/month
measure prior year
measure current year
2010/10
2010/11
2010/12
2011/01
2011/02
2011/03
2011/04
2011/05
2011/06
2011/07
2011/08
2011/09
2011/10
439
97
2011/11
7.294
2.712
2012/02
20.496
13.397
2012/05
21.859
12.636
2013/01
36.325
27.286
2014/08
26.894
17.425
There are no values for [measure current year] before 2011/10. But, there are values for [measure prior year_1] before 2011/10. [measure prior year] is actually from 2010/10, 2010/11 and so on, as defined with RelativeValue.
No problem here. Everything works fine. But, now, I want to start the table with the first row where [measure prior year] is not null while leaving measure current year unchanged. Just cut the table and start with 2011/10...
And here we get the problem. Hence, RelativeValue references to values before 2011/10 all these reference will disappear for [measure prior year].
The same is with charts. I couldn't find a way to reference to values that exist by the query but which are not displayed in a table or a chart!
What I need is a way to reference to values which are not present in a single table or chart but in the report. I already fiddled with the display options (null values, without dimension etc.) of tables. But, no way.
How could a accomplish this task?
Any idea of something like "hiding" unwanted rows/bars results in "loss of data".
Thanks for any help
Matthias

Well... if you think and try long enough, you may find the solution .
The core problem is to reference to queried values not shown in the table/chart. And there IS a solution.
Just use...
NoFilter(RelativeValue([measure prior year_1];([year/month]);-12))
... instead of
RelativeValue([measure prior year_1];([year/month]);-12)
NoFilter enables RelativeValue to reference to values not present in a table or chart, but available in the report .
From there on, you can define e.g. the starting point of the category axis of a chart by defining a local filter without losing values to be referenced .

Bc4juix:table and Columns with links (Jsp tags)

I'm tring to create a table with an image link that will pass the values of other columns on the url. The problem is I can't get the attribute values from the table. Here is a sample of my code:
<bc4juix:Table datasource="ds1" width="100%" >
<uix:column>
<uix:columnHeader>
<uix:sortableHeader text="Orc" value="Orc"
sortable="no" />
</uix:columnHeader>
<uix:contents>
<uix:image destination="<%=url%>" source="new.gif" />
</uix:contents>
</uix:column>
</bc4juix:Table>
Please help me!!!
Jeff

Urgent problem please help.

SVG Chart with CheckSum (CS) in link

Hi,
I've got a SVG chart with links in it. If I do links without checksums it works fine. The second I add a checksum it gives me the following error:
 
XML Parsing Error: not well-formed
Location: http://myurl.com:8080/apex/f?p=107:6:2218842577149441:FLOW_SVG_CHART_R7148121064428318_en-us
Line Number 22, Column 1690:
 
I'm using Oracle XE w. APEX. Heres' what I did.
Initially in my query I had the following for the link column:
f?p=&APP_ID.:3:&SESSION.::NO::P2_ID:4
This worked and had no problems whatsoever.
 
Now I tried to add the checksum (as required by Page 3)
HTMLDB_UTIL.PREPARE_URL('f?p=&APP_ID.:3:&SESSION.::NO::P2_ID:4')
This gave me the error that I mentioned above.
 
To confirm that it was the checksum I did one last test where I manually entered in a checksum (I know the checksum is wrong but I just wanted to see if it would show the table or not)
f?p=&APP_ID.:3:&SESSION.::NO::P2_ID:4&cs=123
Again this gave me the error.
 
Any ideas on this?

Is there no possibility?

Combo Chart with Static Table

Hi Experts! I have one assignment to do...I have a bar line chart with departments on axis X and a static table with departments on rows....and one measure. Chart and static table has the same info. My static table has "Enable column sorting in Dashboards" YES, and a Rows per Page 10.
In dashboard I can click on column department to order A-Z or Z-A and my chart also changes, but in my chart I can see ALL departments (not 10) :S. Is possible to see in chart the same departments that I see in static table???
Thank you very much!
Regards

this can be done with some work in pivot table. in pivot table use chart + table for your report. then implement pivot table pagination. that allows you to select page and based on selection chart and table changes. but enable sorting on dashboard wont work in pivot tables.
and here is the link for pagination on pivot table.
http://oraclebizint.wordpress.com/2008/01/17/oracle-bi-101332-pagination-in-pivot-tables/

Linking table of contents with pages 5.0

I write some help-books for friends and the family.
I wrote down everything I need and I've created a table of contents with page numbers.
Now you can push the numbers behind the headings and you are automatically on the right page for reading the text. (In Pages document)
In pages 5.0 these things are still working fine, but....
When I export the document into a pdf, you can't push/touch the headings and the numbers behind there headings.
With the old pages, after exporting the document into a pdf, you could import it into iBooks on the iPad. In iBooks now you can touch a heading and you'll get on the right page.
That was realy helpfull, 1 click and you could read the text on which you're interested.
But with the new pages 5.0 this feature is deleted... or I do something wrong.
Could anyone of you help me for getting this feature back, if I do something wrong?

Well there is a standard body for EPUB - http://idpf.org/epub
And, Apple furnishes the TEMPLATE - the Pages 09 TEMPLATE - automatically (supposedily) makes the TOC links which - then - you can export to EPUB.
Again, the problem I'm daling with is that the Kindle for the iPad, does not see the TOC. It des see it in the Kindle Softward for the Mac - which is different - for some reason. I have authored two books on Pages but Amazon converts my EPUB file to fit the Kindle device itself.

Creating PDF with links in Table of Contents

How do I convert a Word file (in which the page numbers in the Table of Contents are links to their corresponding headings) to a PDF file so that the page numbers in the Table of Contents are still liinks to their corresponding headings? I am working with Adobe Acrobat 9 Pro. Thanks!

Hmmm. I hadn't heard of this limitation. Indeed, http://www.pdfa.org/2011/08/pdfa-–-a-look-at-the-technical-side/ says "With regard to hyperlinks, the special ‘Link’ annotation type is permitted with or without activated ‘Appearance’. " Maybe this document is being generated with a different kind of annotation.

Export Table along with Link Files

Moved from 1.6 to 2.0.
Exported my application from 1.6 and imported it into 2.0 - used "Application Export" feature - works fine.
Exported most of my tables from 1.6 to 2.0 - used "Table Export" feature - works fine.
Problem, I have certain Tables that reference/link to "uploaded files". These are PDFs, SLS and other files - now referenced/linked by these Tables. How do I move over these tables and their linked/uploaded files?

Maybe this should have been posted with a title of Backup Process.
We had a server running 10.1 and HTMLDB 1.6. We installed another server and put 10.2 on it with HTMLD 1.6. We couldn't move over everything because we were going from 10.1 to 10.2 -- so we moved over the tables -- this was recommended by Oracle.
Our tables came over ok but those tables that had attachments/links/uploads in them came over without the attachments/links/uploads. In their place came cryptic references(pointers?) but not the attachemnts.
Our end game here is to have 2 servers so that if one fails then we can use the other server. We are now upgrading both servers to 10.2. When both servers have 10.2 we will stop upgrading (for a long time) the database. The database had to be upgraded because of a bug in the Enterprise Manager Backup Process.
We will want new versions Applcation Express/HTMLDB. We would upgrade both machines to keep them compatable.
Maybe there is utility (that we can comprehend) that allows us to Export tables with attachments from one server and Import them with their attachments into the other server. Or, maybe going forward we should not try to move tables with attachments using Application Express export utilities but move over workspaces or schemas or something.

How to test issue with accessing tables over a DB link?

Hey all,
Using 3.1.2 on XE, I have a little app. The database schema for this app only contains views to the actual tables, which happen to reside over a database link in a 10.1.0.5.0 DB.
I ran across an issue where a filter I made on a form refused to work (see [this ApEx thread| http://forums.oracle.com/forums/message.jspa?messageID=3178959] ). I verified that the issue only happens when the view points to a table across a DB link by recreating the table in the local DB and pointing the view to it. When I do this, the filter works fine. When I change the view back to use the remote table, it fails. And it only fails in the filter -- every other report and every other tool accessing the remote table via the view works fine.
Anyone know how I can troubleshoot this? For kicks, I also tried using a 10.2.0.3.0 DB for the remote link, but with the same results.
TIA,
Rich
Edited by: socpres on Mar 2, 2009 3:44 PM
Accidental save...

ittichai wrote:
Rich,
I searched metalink for your issue. This may be a bug in 3.1 which will be fixed in 4.0. Please see Doc ID 740581.1 Database Link Tables Do NoT Show Up In Table Drop Down List In Apex. There is a workaround mentioned in the document.
I'm not sure why I never thought of searching MetaLink, but thanks for the pointer! It doesn't match my circumstances, however. The Bug smells like a view not being queried in the APEX development tool itself -- i.e. the IDE's coding needs changing, not necessarily those apps created with the IDE.
I'm working on getting you access to my hosted app...
Thanks,
Rich

Table with Linktoaction cell editor VS ALV with Link to action cell editor

Hi,
i am replacing table UI with ALV, i am encountering series of problems one of them is below.
when i click on linktoaction cell in table i can see wdevent has context_element which is element reference, which is being used in action handler to perform some logic...
however when i replace with alv where i displayed one column with link to action cells using CL_SALV_WD_UIE_LINK_TO_ACTION class, however when i click on any particular cell i only get information related to that cell like column name, attribute name, value and position.
however as i said i need context element reference to work with which is not coming with alv.
please suggest.

yes, that is right, you have to get the context element from the node based on the Index you get.

Table with Links

Hi everyone!
Can anyone tell me how to create table in portal through netweaver developer studio with links to the documents stored in KM repository.
Thanks in advance..
sonal

Hi Sonal,
You can get acces to KM documents thro:
IUser user = (IUser) request.getUser();
IResourceContext resourceContext = new ResourceContext(user);
RID rid = RID.getRID("/document");
IResource resource = (IResource) ResourceFactory.getInstance() .getResource(rid, resourceContext);
Get the access URL path to the documents. Have a look at these KM APIs.
<a href="http://">https://media.sdn.sap.com/html/submitted_docs/nw_kmc/howto/rf/client_api/rf_client_api.html</a>
Hope it helps.
Regards,
Saravanan

Linking tables in Crystal with no relationship

I have three tables i need to link together. The first two have something in common where I it's no problem...but the problem is I require a third table where there is no common factor. I was told connecting a distribution table to this would work but not quite sure what that means...i'm new at this.

Hi,
Please advice all three table name to advice.
Thanks & Regards,
Nagarajan

Creating SVG Chart with multiple lines

Hi All,
I want to create a chart with multiple lines.
Ex: I have one emp table with empno, sal and deptno columns.
I want to print deptno in x axis and no of employees on y axis.
I want to print one line for employees with sal > 15000 and one more line for employee with sal =< 15000
So one line will show no of employees with sal more than 15000 for each dept. Similar case for the other line and these 2 lines should be in different colors.
For one line the query will go as
select link, deptno, count(empno)
from emp where sal > 15000 group by null, deptno
Is this possible to draw this chart?
Thanks,
Manoj

I wasn't able to do something like what you describe, but I was able to do this:
I defined column A of the table as a Header Row, selected the cells in the table, and chose this chart type (2D 2 Axis):
Then I clicked the chart and in the pane at the right checked 'Axis Name' in the Axis tab and added the axis names.
Maybe this can give you an idea of how you can illustrate the relationships that you want to show.
SG

Bubble chart with connecting line

Hi All,
Is there a way we can create bubble chart with connecting line.The bubble chart has only two measure, horizontal and size of bubble connected by lines. I am not able to find this kind of chart.Is there a way for similar chart?
I am showing the chart in this link.
http://imageshack.us/photo/my-images/689/bubblewv.png/
Thanks,
Vishal
Edited by: 872073 on Sep 27, 2012 7:20 AM

I need to make an assumption to answer your question: I need to assume that you are getting your data with a query similar to:
select DoW, Part, sum(qty) as Count
from sales
group by DoW, Part
Change that to...
select DoW, Part, sum(qty) as Count
from sales
group by DoW, Part
UNION ALL
select distinct "Target" as DoW, Part, 50 as Count
from sales
That will feed the target into the cross tab, which will create an additional column, Target, with the value 50 for all parts. If the target is for the day, not part, then you would UNION
select distinct DoW, "Target" as Part, 50 as Count
from sales
which would give you an additional row with the constant target value of 50.
HTH,
Carl
P.S., There might be (probably is) better tables to use as the FROM table for the target SELECT. I wanted to keep things simple...

Exporting analytic chart with dates

Hi,
I have an analytic chart with a list including some columns: id's names, dates, and amounts. This looks good in Sharepoint, but when I export the list to Excel, the dates are formatted as "General". They cannot be sorted or filtered as dates.
I have tried having the date both as measure and attribute, but it makes no difference, it still behaves like text when it gets over to Excel. The closest I have is having the date as an integer and format as date is Excel, but of course, this looks rubish
in Sharepoint.
Any idea how I can get dates that looks and behaves like dates both in Sharepoint and the export to Excel

Hi Jerry,
I'm ALMOST there! If you could help me with one last thing it would be amazing. I've uploaded my number project and you can downloaded it on the link bellow, if you prefer.
I managed to do the same idea chart as you have. However I would like to have two bars for every JOB (y-axis). On my table i've inputed for every job 4 values = START DATE that was scheduled / Duration period scheduled (this happens prior to the job itself // START DATE Delivered / Duration Period Delivered (this is the actual time the JOB took place). This way I can see at the end of a JOB if I worked during the period I planned.
using your example on the chart above (your reply) Could Proposal have a bar 1.0 / 4.0 - and bellow this bar have another one (with different colours) that went from 2.0 / 5.0 - for example? - the first one representing the "scheduled dates"and the second one representing what actually happened.
I managed to do the four bars but couldnt manage to have them bellow each other.
Tks again for your help
files.me.com/jujudavies/wgugl1.numbers.zip
x'jul.

Table - or Chart - with Links

Similar Messages

Maybe you are looking for