Table or report to know when system got offline

Hi,
Is there any report or table available, where I can check when system was offline?
Thanks in Advance.
Regards,
Trine

Hi,
I want know if there is any update/information when system got offline.
When user take system offline, it must updated some where in BPC.
Our Auditor need a report or information on when and who change the system status to offline during a particular period?
Is it possible to get this information in any way for QA and Production system?
Regards,
Trine

Similar Messages

Iam from Yemen we have CDMA carrier called Yemen mobile I bought an iPad from the US CDMA works with Verizon when I got to Yemen doesn't work with the carrier Yemen mobile and both carriers verizon and Yemen mobile work by the CDMA system don't know whey

Iam from Yemen we have CDMA carrier called Yemen mobile I bought an iPad from the US CDMA works with Verizon when I got to Yemen doesn't work with the carrier Yemen mobile and both carriers verizon and Yemen mobile work by the CDMA system don't know whey can anyone help me please..

A Verizon-model iPad can only work on CDMA with Verizon. You cannot use it with any other carrier. Apple, to my knowledge, has not released the iPad in Yemen, so there is no iPad you can use with any carrier there that works only on CDMA. You would need to find a GSM carrier and then get an unlocked GSM iPad.
Regards.

Not Updating Customized Table when System having Performance Issue

Hi,
This is actually the same topic as "Not Updating Customized Table when System having Performance Issue" which is posted last December by Leonard Tan regarding the user exit EXIT_SAPLMBMB_001.
Recently we changed the program function module z_mm_save_hide_qty to update task. However this causes more data not updated. Hence we put back the old version (without the update task). But now it is not working as it used to be (e.g. version 1 - 10 records not updated, version 2 with update task - 20 records not updated, back to version 1 - 20 records not updated).
I tried debugging the program, however whenever I debugged, there is nothing wrong and the data is updated correctly.
Please advise if anyone has any idea why is this happening. Many thanks.
Regards,
Janet

Hi Janet,
you are right. This is a basic rule not to do any COMMIT or RFC calls in a user exit.
Have a look at SAP note 92550. Here they say that exit EXIT_SAPLMBMB_001 is called in the update routine MB_POST_DOCUMENT. And this routine is already called in UPDATE TASK from FUNCTION 'MB_UPDATE_TASKS' IN UPDATE TASK.
SAP also tells us not to do any updates on SAP system tables like MBEW, MARD, MSEG.
Before the exit is called, now they call 'MB_DOCUMENT_BADI' with methods MB_DOCUMENT_BEFORE_UPDATE and MB_DOCUMENT_UPDATE. Possibly you have more success implementing the BADI.
I don't know your situation and goal so this is all I can tell you now.
Good luck!
Regards,
Clemens

HT202663 each time I go to mail it asks me to join a wireless network. I choose the one I have and dont know why I dont stay connected. I took my mac book pro to vermont and joined the network at my house there, when I got back to ny I joined here but it

my mac book pro would connect automatically to my wireless network in ny. then I went to vermont with my computer and connected to my wireless network there. when I got back to ny I changed it back to my wireless connection here but it wont stay connected. each time i go on mail it asks me to join a network. it hink i did all the right steps but it wont stay joined.

Back up all data before making any changes.
Step 1
Take all the applicable steps in this support article.
Step 2
If you're running OS X 10.8.4 or later, run Wireless Diagnostics and take the remedial steps suggested in the summary that appears, if any. The program also generates a large file of information about your system, which would be used by Apple Engineering in case of a support incident. Don't post the contents here.
Step 3
If you're not using a wireless keyboard or trackpad, disable Bluetooth by selecting Turn Bluetooth Off from the menu with the Bluetooth icon. If you don't have that menu, open the Bluetooth preference pane in System Preferences and check the box marked Show Bluetooth in menu bar. Test. Continue if you find that Wi-Fi is faster with Bluetooth disabled.
From that same menu, select Open Bluetooth Preferences. If the box labeled Discoverable is checked, uncheck it. Click the Advanced button, and in the sheet that opens, uncheck the top three boxes, if any are checked. Click OK. Enable Bluetooth and test again.
If the application called "Bluetooth Setup Assistant" is running, quit it.
Step 4
This step will erase all your settings in the Network preference pane. Make a note of them before you begin, and recreate them afterwards. It may be helpful to take screenshots of the preference pane.
Triple-click the line below on this page to select it:
/Library/Preferences/SystemConfiguration
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu.* A folder should open with an item named "SystemConfiguration" selected. Move the selected item to the Trash. You may be prompted for your administrator password.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.
Step 5
Reset the System Management Controller.
Step 6
Make a "Genius" appointment at an Apple Store, or go to another authorized service center.
Back up all data on the internal drive(s) before you hand over your computer to anyone. There are ways to back up a computer that isn't fully functional — ask if you need guidance.
If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
Keeping your confidential data secure during hardware repair
*An SSD doesn't need to be zeroed.

When we got our computer it all ready had 2 user names on it Administrator and Teacher and we dont know the passwords for them.

When we got our computer it all ready had 2 user names on it Administrator and Teacher and we dont know the passwords for them.

Assuming you have been able to set yourself up as an Administrator so far, you can just go into Applications>System Preferences>Users & Groups and delete the other three accounts by highlighting them one at a time in the left hand column and clicking the "Minus" symbol at the bottom of the column.
If you have NOT been able to set yourself up as an Administrator also so far, then the following article should help:
http://www.macworld.com/article/1164599/reset_password_lion.html
Hope this helps

HT5621 When I got my new iPhone and was trying to switch everything over I accidentally set up a new icloud account with one email and had one on my old iphone with another account. Does anyone know how I can merge the two accounts?

When I got my new iPhone and was trying to switch everything over I accidentally set up a new icloud account with one email and had one on my old iphone with another account. Does anyone know how I can merge the two accounts?

You cannot merge Apple IDs but you can go to Settings > iCloud and 'Delete Account'. When prompted to turn off documents and data, choose the only option which is Delete from my iPhone, but on the other prompt for Contacts, Calendars, etc you can choose 'Keep on my iPhone' Then once the Account is Deleted form the iPhone, log back in with the correct Apple ID and choose Merge when prompted. This will merge your data from this iPhone with that iCloud account effectively putting your devices on the same account.

Hello people, I lost all my contacts on my iPhone. Facebook contacts integration is turned off. When I got to know that I have no contacts on my iPhone. I checked my settings and iCloud backup and contacts on iCloud (in settings) were off. Is there a solu

hi me kashif Hello people,
I lost all my contacts on my iPhone. Facebook contacts integration is turned off. When I got to know that I have no contacts on my iPhone. I checked my settings and iCloud backup and contacts on iCloud (in settings) were off.
Is there a solution to get all my contacts back? Please help me. I want my contacts back, as soon as possible.
Thank you in advance.
iPhone 4S, iOS 7.0.4

Unless as part of a backup, or stored somewhere else, they are gone.
Your son needs his own Apple ID for iCloud, FaceTime & iMessage. He can continue to use yours for iTunes content, but for everything else, he needs his own.
When you did what you did, as far as iCloud knows, this is the same person with multiple devices, and that's they way things are supposed to work: keep everything in sync.

Table Header in freezed pane when exporting SSRS report to Excel

Hi,
I want table Header in freezed pane when exporting SSRS report to Excel.
Can I have the table header of tablix be present in freezed pane of excel.
Thanks,
Vivek Singh

Hi Vivek,
Please refer the following thread.
may be u get the answer.
How to freeze header pane in SSRS
Regards
msbilearning

How forms know when Report Server is down

Environment: Oracle Developer Suite 10g 10.1.2.0.2 R2
os :windows xp
I have button to call a report object :when-button-pressed
declare
v_report_name VARCHAR2(30):='REQ010';----report name without .rdf
          v_repid REPORT_OBJECT;
          vc_rep VARCHAR2(20);
          vc_rep_status VARCHAR2(20);
          vc_URL VARCHAR2(100);
          vc_rep_job VARCHAR2(10);
          Plist ParamList;
          dummy NUMBER;
          Report_Plist_name VARCHAR2(30) := 'REPORT_PARAM_LIST';
          REPORT_NOT_GENERATED EXCEPTION;
          PARAMETER_LIST_SECTION_PROBLEM EXCEPTION;
BEGIN
--=========================================================================
BEGIN
                    --prepare the list of parameters to be sent to the report
                    Plist := Get_Parameter_List(Report_Plist_name);
                    IF NOT Id_Null(Plist) THEN
                         Destroy_Parameter_List(Report_Plist_name);
                    END IF;
                    Plist := Create_Parameter_List(Report_Plist_name);
                    IF Id_Null(Plist) THEN
                         dummy := Show_Alert('PARAM_LIST_CREATION_PROBLEM');
                         RAISE Form_Trigger_Failure;
                    END IF;
                    --Add parameter(s) to list just created
                    Add_Parameter(Plist, 'P_REQUEST_ID', TEXT_PARAMETER, :CUSTOMER_REQUESTS.CR_REQUEST_ID);
     EXCEPTION
WHEN OTHERS THEN
raise PARAMETER_LIST_SECTION_PROBLEM;
END;
--=============================================================================
          --START THE REPORT
          v_repid := FIND_REPORT_OBJECT(v_report_name);
          vc_rep := RUN_REPORT_OBJECT(v_repid,Plist);
          vc_rep_status := REPORT_OBJECT_STATUS(vc_rep);
--=============================================================================
BEGIN
                    IF vc_rep is NOT NULL THEN
                              -- Wait until report finishes or produces an error
                              WHILE vc_rep_status in
                              ('RUNNING', 'OPENING_REPORT', 'ENQUEUED')
                              LOOP
                                   vc_rep_status := REPORT_OBJECT_STATUS(vc_rep);
                              END LOOP;
                              -- Display the report if it is finished
                              if vc_rep_status = 'FINISHED' then
                                                  vc_rep_job := substr(vc_rep,instr(vc_rep,'_')+1);
                                                  message('Report Completed');
                                                  vc_URL := '/reports/rwservlet/getjobid' ||vc_rep_job||
                                                  '?server='||get_report_object_property
                                                  (v_repid,report_server);
                                                  Web.show_document(vc_URL,'_blank');
                                                  -- Display an error if the report errored
                         END IF;
                    END IF;
EXCEPTION
WHEN OTHERS THEN
raise REPORT_NOT_GENERATED;
END;
--=============================================================================
Destroy_Parameter_List('REPORT_PARAM_LIST');
EXCEPTION
WHEN REPORT_NOT_GENERATED THEN
msgbox('Error Calling Report');
--Causes: 1-Report file name is incorrect,check report name and existance.
-- 2-Or, Report Server is Down.
WHEN PARAMETER_LIST_SECTION_PROBLEM THEN
msgbox('CHECK PARAMETER SECTION ');
WHEN OTHERS THEN
msgbox(SQLERRM);
END;
Problem:
======
How can I distingwish among these conditions:
IF Report cannot run :
when the problem is from the report file object itself.
and IF the problem is the Report Server is Down.
and the report file is not exist.
Tries:
I try to but many exception to differenciate between these conditions but I fail
how can I display a message to the user,Inform him the problem ,
So the support personnel know if the problem from the Report object or the application Server
.

Hi Krishan,
If you want to check if local cache service is running, you can do something like this:
NamedCache cache = CacheFactory.getCache(sCacheName);
boolean isRunning = cache.getCacheService().isRunning();If you want to check if any storage enabled nodes (cache servers) are available in the cluster:
NamedCache cache = CacheFactory.getCache(sCacheName);
DistributedCacheService service = (DistributedCacheService) cache.getCacheService();
Set storageEnabledMembers = service.getStorageEnabledMembers();
if(storageEnabledMembers.isEmpty())
    // no cache servers available ...
    }Regards,
Dimitri

Ora-20001 when creating a form on table with report (bug?)

Having some trouble creating a "Form on table with report".
1) I pick my table
2) take most of the defaults on the page where you pick the report type (interactive) and the page number (I changed it to 950). next->
3) Do not use tabs. Next->
4) Select all columns for the report. THEN (here's the problem) set an optional where clause of system_role_name like 'ODPSPOPUP%'. Next->
5) choose standard edit link. next->
6) Specify a page of 951 for the form (leave others defaults). next->
7) Set the form primary key (defined in table). next->
8) use existing trigger. next->
9) choose all columns for the form. next->
10) Leave actions to insert, update, delete. next->
11) Get to the summary page and click Finish
Then I get an error page saying:
ORA-20001: Unable to create query and update page. ORA-20001: Unable to create query and update page. ORA-00933: SQL command not properly ended
If I go back to step 4 and erase my where clause the wizard completes successfully.
Also if I change the report type in step 2 from the default of "Interactive" to "Classic" the wizard completes successfully. However upon running the report I get a query parse error. Looks like the where clause in the report sql is: system_role_name like ''ODPSPOPUP%'' (two single quotes on each side).
It looks as if you cannot specify a where clause with a quoted string. The wizard is expecting a bind variable.
Workaround(s):
1) Don't specify a where clause when report type = Interactive in "create form on table with report" wizard.
or
2) Specify a bogus where clause using bind variable syntax such as "system_role_name like :BOGUSVARIABLE". Then edit the report query once the wizard finishes and change the where clause to the constant string you wanted to use in the wizard (e.g. "system_role_name like 'MYSYSTEM%'")
Apex: 3.2.0.00.27
Database: Oracle Database 11g Enterprise Edition 11.1.0.7.0 64bit Production (Oracle EL5)

Andy,
It's a bug, all right. Thanks for the detailed problem description. We'll fix it when we can.
Scott

When I got a new iPhone5, I experienced short battery life, and system sofware issues were not the cause. The camera also takes a blury picture regardless of lighting and I have the black one. Has anyone else experienced similar problems?

When I got a new iPhone5, I experienced short battery life, and system sofware issues were not the cause. The camera also takes a blury picture regardless of lighting and I have the black one. Has anyone else experienced similar problems?

What makes you so sure it isn't software?
The camera can be focused by take the point of focus on the touch screen.
If it is new as you said, it should be under warranty. Make a Genius Bar appointment or contact Apple with a repair request.

My problem started when system preferences was unresponsive and would not force quit. I tryed to restart and got the grey screen, but it never restarted. I closed the lid and now the screen is blank. Has anyone had a similar problem after Lion?

My problem started when system preferences was unresponsive and would not force quit. I tryed to restart and got the grey screen, but it never restarted. I closed the lid and now the screen is blank. Has anyone had a similar problem after Lion installation?

No, as I have yet to be convinced on Lion.
Did a permissions repair help from the install DVD?

Macbook hard drive crashed, i lost windows for mac, bought a disc when i got the mac, no longer have the disc, need my apps, don't wanna pay for it again. know how to get it quick without having to give my mac to the genius bar at apple store overnight

macbook hard drive crashed, i lost windows for mac, bought a disc when i got the mac, no longer have the disc, need my apps, don't wanna pay for it again. know how to get it quick without having to give my mac to the genius bar at apple store overnight?

What is it you need - Windows installer disc or something else? Your question is unclear. Could you be more specific?

I want to know when we issue truncate table statement in oracle .

i want to know when we issue truncate table statement in oracle .No log will be write in redo log .But we can recover data using flashback or scn.I want to know where is the actually truncate table statement log is stored in oracle database.Please explain me in detail step by step .

Hi,
I have truncated table after that i have restored that data.See below the example.I want to know from where it's restored.
From which log file it's restored.
create table mytab (n number, x varchar2(90), d date);
alter table mytab enable row movement;
Table altered.
SQL> insert into mytab values (1,'Monsters of Folk',sysdate);
1 row created.
SQL> insert into mytab values (2,'The Frames',sysdate-1/24);
1 row created.
SQL> commit;
Commit complete.
SQL> select CURRENT_SCN from v$database;
CURRENT_SCN
972383
SQL> select * from mytab;
N
X
D
1
Monsters of Folk
30-DEC-12
2
The Frames
30-DEC-12
N
X
D
SQL> set lines 10000
SQL> /
N X D
1 Monsters of Folk 30-DEC-12
2 The Frames 30-DEC-12
SQL> select to_char(sysdate,'yyyymmdd hh24:mi:ss') from dual;
TO_CHAR(SYSDATE,'
20121230 09:29:24
SQL> set timing on
SQL> truncate table mytab;
Table truncated.
Elapsed: 00:00:15.75
SQL> select * from mytab as of timestamp TO_TIMESTAMP('20121230 09:29:24','yyyymmdd hh24:mi:ss');
N X D
1 Monsters of Folk 30-DEC-12
2 The Frames 30-DEC-12
Elapsed: 00:00:00.28
SQL> insert into mytab select * from mytab as of timestamp TO_TIMESTAMP('20121230 09:29:24','yyyymmdd hh24:mi:ss');
2 rows created.
Elapsed: 00:00:00.01
SQL>

I had my computer repaired, and when I got it back I had to reinstall iTunes. Now iTunes won't authorize this computer because it says we already have 5 devices authorized, but this is the same computer. Does anyone know how I can fix this?

I had my computer repaired, and when I got it back I had to reinstall iTunes. Now iTunes won't authorize this computer because it says we already have 5 devices authorized, but this is the same computer. Does anyone know how I can fix this?

Deauthorizing won't delete anything, and all your purchased content is safe. You will just have to reauthorize any of the other computers that get deauthorized along with your computers old machine id.
To get your purchased content back on that computer, just use iTunes to redownload it (http://support.apple.com/kb/HT2519?viewlocale=en_US&locale=en_US). Of course, music you ripped from CD or got from another source you'll need to copy those files back over.

Table or report to know when system got offline

Similar Messages

Maybe you are looking for