Table or view which has complte Pro.Details

Hi All,
Iam new to this module and I need a information.
We are trying to make a report which contains
Project / Proj Description / WBS / WBS description / Network / Activity
Is there is any tables/views available to get these information from 2-3 tables with link fields.
Regards
Sureshbabu Arunachalam

Please refer this link for PS tables.
SAP Project System - A ready Reference ( Part 2 )
It seems that your were asking for the report which contans all the PS object as suggest by Virendra CN41 oneshot solution.
Regards
Nitin
Edited by: Nitin Patoliya on Dec 29, 2008 3:40 PM

Similar Messages

Read only view which has an ORDER BY clause

Aim to create a read only view which has an ORDER BY clause
Sample script
CREATE TABLE tab1 (
col1 VARCHAR2(3),
col2 NUMBER
INSERT INTO tab1(col1, col2) VALUES ('ccc', 30);
INSERT INTO tab1(col1, col2) VALUES ('bbb', 20);
INSERT INTO tab1(col1, col2) VALUES ('ddd', 40);
INSERT INTO tab1(col1, col2) VALUES ('aaa', 10);
COMMIT;
-- To creat View
CREATE OR REPLACE VIEW v_tab1
AS
SELECT
col1,
col2
FROM
tab1
ORDER BY
col1
WITH READ ONLY;
I get the following error
WITH READ ONLY
ERROR at line 10:
ORA-00933: SQL command not properly ended
When I comment out the ORDER BY clause, the view is created
Pls let me know how I can create a read only view with ORDER BY clause

Hi,
take a look at the documentation for CREATE VIEW, there is a restriction:
"You cannot specify the ORDER BY clause in the subquery if you also specify the subquery_restriction_clause."
Wolfgang

How to set the view, which has to be shown at runtime?

Hi,
in my application i have more than one view, but at runtime only one of these views has to be shown. I want to decide this via a parameter that I get from the url.
How can i set the right view to be showing at runtime?
I tried it with a StartView which fires the right Outbound Plug in his wdDoInit-Method. This is working fine, but the problem is, that the method OnPlugDefault() of ComponentInterfaceViewController isn't called already at this time. So in the Init-Method of the StartView I don't have the given URL Parameter, so I can't decide which Plug I want to fire. The method OnPlugDefault() is called only after the init-method of the StartView.
Is there any other possibilty to set the view, which has to be shown, at runtime?
Thanks and Best Regards
Katharina

Hi,
One way is you can pass the parameter in the URL , read the parameter and then fire the outbound plug depending upon that.
You can read the parameters as follows
HttpServletRequest request =Task.getCurrentTask()
.getWebContextAdapter()
.getHttpServletRequest();
String[] param1 = request.getParameterValues("<<PARAMETRNAME");
if(param1.equals("VALUE"))
fire outbound plug1;
Regards, Anilkumar

Table and views which are afftected during the SAP license post processing

Hi,
can anyone tell me those table and views which are afftected during the SAP license post processing process in SAP 4.7 installation on oracle.
Regards,
Abhishek

hi
there is no table active with the name MLICHECK
the table is not active in the dictionary
what to do now?
i want to see the license data of the sap system now in the table view..............

How to CREATE VIEW to merge two tables each of which has CLOB-typed column

I failed in creating a view to merge two tables that have CLOB-type column each.
The details are:
Database: Oracle 9i (9.2.0)
Two tables "test" and "test_bak", each of which has the following structure:
ID Number(10, 0)
DUMMY VARCHAR2(20)
DUMMYCLOB CLOB
The following operation fails:
create view dummyview (id, dummy, dummyclob) as
select id, dummy, dummyclob from test
union
select id, dummy, dummyclob from test_bak;
I was announced:
select test.id, test.dummy, test.dummyclob
ERROR in line 2:
ORA-00932: inconsistent data type: required - , but CLOB presented.
But if creating views from only ONE table with CLOB-type columns, or from two tables WITHOUT CLOB-typed columns, the creation will succeed. The following 1) and 2) will succeed, both:
1) one table, with CLOB-typed column
create view dummyview (id, dummy, dummyclob) as
select id, dummy, dummyclob from test;
2) two tables, without CLOB-typed columns
create view dummyview (id, dummy) as
select id, dummy from test
union
select id, dummy from test_bak;
I want to merge the two tables all, with complete columns, how to write the CREATE VIEW SQL statement?
many thanks in advance

Dong Wenyu,
No.
But you could do this:
SELECT source.*, nvl (tab1.clob_column, tab2.clob_column)
FROM your_table1 tab1, your_table2 tab2, (
SELECT primary_key, ...
FROM your_table1
UNION
SELECT primary_key, ...
FROM your_table2
) source
WHERE source.primary_key = tab1.id (+)
AND source.primary_key = tab2.id (+)
In other words, do the set operation (UNION (ALL)/INTERSECT/MINUS) on just the PK columns before pulling in the LOB columns.
d.

Need to display the messages in a view which has the pop up on it

Hello all,
I have a view(View 1) in which if i click a button a pop up is being displayed.
Now on the pop up(which has view 2 of window 2) i have a button(Ok) and if i click it then based on a condition i need to close the pop up and then display the message in the message area of View 1.
Now if i click the button on the Pop up then it is being closed and the message is not being displayed on view 2.
I think the message is being displayed on the pop up and is being closed after that.
How can i display my message on View 1.
Any ideas...Please help
Thanks in advance,
Shravan

Hi Shravan,
Create Message area in view1.
and also give VIEW name wile displaying error message and try.
*   report message
CALL METHOD lo_message_manager->REPORT_ERROR_MESSAGE
    EXPORTING
      MESSAGE_TEXT              =
*      PARAMS                    =
*      MSG_USER_DATA             =
*      IS_PERMANENT              = ABAP_FALSE
*      SCOPE_PERMANENT_MSG       = CO_MSG_SCOPE_CONTROLLER
      VIEW                      =   VIEW1 .
Cheers,
Kris.

To Get List of Tables from Database which has the data 'AAAA' - T-SQL Query

Hi,
I have a database "Adventureworks", I need to get list of tables, which has the data 'AAAA' in their rows.
Is there any optimised or simple way to do this task?
Any T-SQL Query Available
--- Thanks in advance..

You can refer the same below URL provided by Praveen:
https://gallery.technet.microsoft.com/scriptcenter/c0c57332-8624-48c0-b4c3-5b31fe641c58
It has the SQL SP - "SP_SearchTables". You can pass parameters the way you want and get the expected output.
-- Search for 'bike' instead of 'AAAA'
Use AdventureWorks2012
EXEC SP_SearchTables @Tablenames = '%', @SearchStr = '%bike%'
-Vaibhav Chaudhari

Problem in creating Entity for view which has "INSTEAD OF " trigger

Hi ,
I have an entity based on a Non updatable Database view (DB_VIEW).this database view has an INSTEAD OF trigger which validates
and save data into a table.
And I have a BC4J view based on this entity.
Problem :
When I try to insert a record using bc4j view object,I get following error
ORA-22816: unsupported feature with RETURNING clause
Query sent by view Object is :
BEGIN INSERT INTO DB_VIEW(COLUMN1,COLUMN2,COLUMN3) VALUES (:1,:2,:3) RETURNING ROWID INTO
:4; END;
I am not able to insert any record in that view.
I tried removing rowID from my BC4J entity and View but problem is that in Databae view there is no
column which can be set as a primary key other then ROWID.

I had the same problem.
Oracle 9.2 sadly does not support the RETURNING clause for database views with INSTEAD OF triggers.
Here is Steves Solution:
1. Create a custom entity def impl class for your entity on the Java panel
2. override the isUseReturningClause() and return false
That should work in 9.0.3.4, 9.0.4 build 1419, and 9.0.5.1 production.
from How to disable generation of RETURNING clause?
Hth, Markus

How to insert a record in to oracle table from Java which has a oracle LONG Field?

The problem is only 80 char's inserted in to the LONG FIELD which happend to me when i run the same insert statement from SQL plus.
Here is the code....
java.io.File inputFile = new java.io.File("input.txt");
int inputFileLen = (int) inputFile.length();
java.io.InputStream ipStream = new java.io.FileInputStream(inputFile);
System.out.println(inputFileLen);
PreparedStatement myStmt = conn.prepareStatement("insert into LONG_EXAMPLE (notes,name)values(?,?)");
myStmt.setAsciiStream(1, ipStream, inputFileLen);
myStmt.setString(2,"Steve");
int res = myStmt.executeUpdate();
myStmt.close();
Note : Here the size of the input.txt 250 bytes , 1KB.
Thanks in advance......:-)
Cheers,
Vetri !

Hien
I had a similar requirement to you and put the code on a push button. In my case the reports are being run interactively to the screen and then printed, and I have no way to know whether the report had actually been printed, so we rely on the user pressing the button. Of course there is a danger that the user forgets to press the button, but in our situation that would not be disasterous. Whatever method is used, I don't think there is any way to be sure that it has actually come out of the printer.

Update enrolled table which has 6 composite primary key

Hi Everyone,
I am trying to update a grade column in table called enrolled which has 6 composite primary key column including SID, TERMYEAR, FACCODE, DEPCODE, COURSENO, SECNO and 2 extra column including GRADE, IDD all of them are of type VARCHAR2 as describe below:
To update this table I used the command below:
UPDATE enrolled
SET grade = :COURSE_BLOCK.GRADE_TEXT
WHERE IID = :GLOBAL.logUserid
AND SID = :COURSE_BLOCK.SID_TEXT
AND FACCODE = :COURSE_BLOCK.FACULTY_TEXT
AND DEPCODE = :COURSE_BLOCK.DEPARTMENT_TEXT
AND COURSENO = :COURSE_BLOCK.COURSE_TEXT
AND SECNO = :COURSE_BLOCK.SECTION_TEXT;
Note: the :GLOBAL.logUserid is a global variable that I assigned the user id when the user log on to the application.
When I run the application and fill out the form in order to update the table this doesn't update the table and if I use SQL*PLUS as well with the values that I use for the form to update the table I get message: o rows updated
Can Someone help please?

Here is the solution.
The problem:
The problem was that the enrolled table was designed in a way that a student can enrolled in the lecture(LEC type column) and Laboratory(LAB type column). When a student is given a grade, it is given a grade for the course 100 (eg: 03-60-100) this course has a lecture and lab. this course belong to the faculty code 03(science) department 60 (computer Science) so when a student register to a course, will register to a lecture and a lab but he will receive a grade for the course 100 lec in this case Oracle couldn't update the table because there was two column with course 100 for that particular student Id
The solution:
There are many solution I believe but my quickest solution is when a student register to the course by default is given a grade 'I' means Incomplete then when the instructor add the grade, he can just update a grade from incomplete to the final grade (eg A) now the code will be to get only the course 100 that has grade and discard that doesn't have grade this means that I need only to make sure that the WHERE Clause grade is not null shown below.
UPDATE enrolled
SET grade = BLOCK_NAME.FIELD_NAME
WHERE grade IS NOY NULL
AND IID = BLOCK_NAME.FIELD
AND faccode = BLOCK_NAME.FIELD
AND depcode = BLOCK_NAME.FIELD
AND courseno= BLOCK_NAME.FIELD_NAME
NAD secno = BLOCK_NAME.FIELD_NAME
AND SID = BLOCK_NAME.FIELD_NAME

Table or view with the request status of all requests in a cube

Dear all,
I search the table or view which is used by Cube / Manage -> InfoProvider Administration (Requests).
Target is to get all status information of all requests started by one InfoPackage.
I found several tables alone but no view. I have currently
RSREQICODS, RSMDATASTATE, RSSELDONE.
Best regards.

I've found a solution for the problem:
*    Select all requests for one Infopackage
      SELECT distinct RNR from rsseldone into table ta_done where LOGDPID = IPak.
      LOOP AT ta_done
        INTO wa_done.
        WRITE: / 'Request: ', wa_done-RNR.
*       Select the maximum Request Number in the Cube
        SELECT SINGLE ICUBE RNSIDLAST from RSICCONT Into wa_cont where RNR = wa_done-RNR.
        WRITE: / 'Icube: ', wa_cont-ICUBE.
        WRITE: / 'Max: ', wa_cont-RNSIDLAST.
*       Check the Maximum Request with status technical and quality ok
        SELECT TECHOK QUALOK from RSMDATASTATE into table ta_state where INFOCUBE = wa_cont-ICUBE.
        LOOP AT ta_state INTO wa_state.
            WRITE: / 'ID TECHOK: ', wa_state-TECHOK.
            WRITE: / 'ID QUALOK: ', wa_state-QUALOK.
            IF wa_state-TECHOK > l_maxid AND wa_state-QUALOK > l_maxokid AND wa_state-QUALOK = wa_state-TECHOK.
               l_maxokid = wa_state-TECHOK.
            ENDIF.
        ENDLOOP.
        IF wa_cont-RNSIDLAST > l_maxokid OR wa_cont-RNSIDLAST = 0.
          WRITE: / 'Request is running with Request: ', wa_cont-RNSIDLAST.
        ELSE.
          WRITE: / 'all Green'.
          l_cont = 0.
        ENDIF.
     ENDLOOP.

DataDictionnary Table or View for InfoSources/Communication Structure

Hi,
I am looking for the assignment between (Source) Fields and InfoObjects.
this is equivalent to:
I am looking for a Data Dictionnary-Table or -View which describes the InfoSource fields / or Communication Structure fields.
Anybody got a hint ?
ThanXs
Martin

RSKS
RSKSFIELD
RSISFIELD

I have an early 2011 MacBook Pro which has been running slow for a while. After looking at responses to similar problems I have downloaded and run EtreCheck and will post the output. Please can someone help me with what it all means.Thanks in advance

I have an early 2011 MacBook Pro which has been running slow for a while. After looking at responses to similar problems I have downloaded and run EtreCheck. Please can someone help me with what it all means.
Thanks in advance.
EtreCheck version: 1.9.15 (52)
Report generated 19 September 2014 08:07:14 GMT+8
Hardware Information: ?
MacBook Pro (13-inch, Early 2011) (Verified)
MacBook Pro - model: MacBookPro8,1
1 2.3 GHz Intel Core i5 CPU: 2 cores
4 GB RAM
Video Information: ?
Intel HD Graphics 3000 - VRAM: 384 MB
Color LCD 1280 x 800
System Software: ?
OS X 10.9.4 (13E28) - Uptime: 0 days 0:4:29
Disk Information: ?
Hitachi HTS545032B9A302 disk0 : (320.07 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) / [Startup]: 319.21 GB (147 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
MATSHITADVD-R   UJ-898
USB Information: ?
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ?
Apple Inc. thunderbolt_bus
Gatekeeper: ?
Mac App Store and identified developers
Kernel Extensions: ?
[not loaded] com.seagate.driver.PowSecDriverCore (5.2.4 - SDK 10.4) Support
[not loaded] com.seagate.driver.PowSecLeafDriver_10_4 (5.2.4 - SDK 10.4) Support
[not loaded] com.seagate.driver.PowSecLeafDriver_10_5 (5.2.4 - SDK 10.5) Support
[not loaded] com.seagate.driver.SeagateDriveIcons (5.2.4 - SDK 10.4) Support
[loaded] com.sophos.kext.sav (9.1.55 - SDK 10.7) Support
[loaded] com.sophos.nke.swi (9.1.50 - SDK 10.8) Support
Launch Daemons: ?
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[running] com.sophos.autoupdate.plist Support
[running] com.sophos.configuration.plist Support
[running] com.sophos.intercheck.plist Support
[running] com.sophos.notification.plist Support
[running] com.sophos.scan.plist Support
[running] com.sophos.sxld.plist Support
[running] com.sophos.webd.plist Support
[running] com.trusteer.rooks.rooksd.plist Support
Launch Agents: ?
[loaded] com.divx.dms.agent.plist Support
[loaded] com.divx.update.agent.plist Support
[running] com.sophos.uiserver.plist Support
[running] com.trusteer.rapport.rapportd.plist Support
User Launch Agents: ?
[loaded] com.adobe.ARM.[...].plist Support
[running] com.amazon.music.plist Support
[loaded] com.google.keystone.agent.plist Support
[not loaded] jp.co.canon.Inkjet_Extended_Survey_Agent.plist Support
User Login Items: ?
iTunesHelper
TomTomHOMERunner
AdobeResourceSynchronizer
Dropbox
Internet Plug-ins: ?
FlashPlayer-10.6: Version: 15.0.0.152 - SDK 10.6 Support
DivX Web Player: Version: 3.2.1.977 - SDK 10.6 Support
AdobePDFViewerNPAPI: Version: 11.0.09 - SDK 10.6 Support
AdobePDFViewer: Version: 11.0.09 - SDK 10.6 Support
Flash Player: Version: 15.0.0.152 - SDK 10.6 Support
EPPEX Plugin: Version: 10.0 Support
Default Browser: Version: 537 - SDK 10.9
OVSHelper: Version: 1.1 Support
QuickTime Plugin: Version: 7.7.3
SharePointBrowserPlugin: Version: 14.4.4 - SDK 10.6 Support
iPhotoPhotocast: Version: 7.0 - SDK 10.7
Safari Extensions: ?
Ultimate
Audio Plug-ins: ?
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins: ?
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes: ?
Flash Player Support
Perian Support
Trusteer Endpoint Protection Support
Time Machine: ?
Skip System Files: NO
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 297.29 GB Disk used: 160.38 GB
Destinations:
Data [Network] (Last used)
Total size: 2 TB
Total number of backups: 99
Oldest backup: 2012-04-20 17:05:32 +0000
Last backup: 2014-09-18 23:49:25 +0000
Size of backup disk: Excellent
Backup size 2 TB > (Disk size 297.29 GB X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU: ?
      6% InterCheck
      5% iCalExternalSync
      3% WindowServer
      2% CalendarAgent
      2% SystemUIServer
Top Processes by Memory: ?
152 MB SophosScanD
147 MB InterCheck
106 MB SophosAntiVirus
66 MB Dropbox
57 MB com.apple.iTunesLibraryService
Virtual Memory Information: ?
161 MB Free RAM
1.55 GB Active RAM
1.41 GB Inactive RAM
902 MB Wired RAM
611 MB Page-ins
0 B Page-outs

Uninstall Trusteer software
http://www.trusteer.com/support/uninstalling-rapport-mac-os-x
Remove Sophos
https://discussions.apple.com/message/21069437#21069437

I am trying to hook my macbook pro to a projector, which has a VGA cable. I bought a VGA to HDMI adapter, but whenever I hook it up, the screen on my macbook just goes black and I can't make it do anything else or even show up on the projector.

I am trying to hook my macbook pro to a projector, which has a VGA cable. I bought a VGA to HDMI adapter, but whenever I hook it up, the screen on my macbook just goes black and I can't make it do anything else or even show up on the projector.
My laptop is still on; it just has a black screen that I can't get rid of without shutting down the computer by holding the power button.

Hey there lynmrigg,
It sounds like have an HDMI to VGA adapter connecting your MacBook Pro and your projector but the screen on your computer goes black and no image appears on the projector. I would use the troubleshooting in the following article to help resolve or isolate the issue here, named:
Apple computers: Troubleshooting issues with video on internal or external displays
Try unplugging the video adapter or cable and then plug it back in.
If more than one video adapter is in use (or "daisy-chained"), troubleshoot by using only one adapter.
Example: A mini DisplayPort to DVI adapter connected to a DVI to HDMI adapter is an unsupported configuration because there is a series of adapters in use.
If available, try using a different display and or adapter (or use a different connector by using DVI instead of VGA, for instance).
Reset the system
You can reset the Mac's parameter RAM and SMC.
Reset the resolution
Start by resetting the Mac's parameter RAM. If the display does not come up, was previously set to an unsupported resolution, and still results in no video:
Start up in Safe Mode.
From the Apple () menu, choose System Preferences.
Choose Displays from the View menu to open the preferences pane.
Select any resolution and refresh rate that your display supports.
Restart your computer.
Thank you for using Apple Support Communities.
Take care,
Sterling

I have an early 2008 Mac Pro, which has re-booting problems. Also what does the spinning beach-ball indicate?

Hi, I have an early 2008 Mac Pro which has re-booting problems.
Processor speed is: 2.8
Memory: 2GB 800 MHz DDR2 FB-DIMM
2 x 28GHz Quad Core Intel Xeon
I am running OSX Yosemite Version 10.10
My Mac Pro keeps re-booting. Last year I had to replace my graphics card. My original card was the ATI Radeon HD 2600 XT 255MB, and that is what I have now. At this precise moment my Mac Pro is running perfectly, except that it is slow and the spinning beach-ball keeps appearing. I have managed to do some work with the disk utilities, verifying, cleaning and partitioning. Some errors were found and when it was cleaned this seemed to help my Mac Pro to function properly. Although I am able to use my Mac Pro now, from day to day I still experience re-boot problems. Also quite unexpectedly my mac dictionary has an error, it closed itself down and will not open at all, I had the message to say that a report will be sent to Apple.
I have tried starting my computer with an external hard drive fitted via a USB cable, I use for back-ups. This worked and I was able to wipe my hard drive clear and replace all info from the back up I had done only a few days ago.
This worked for a few days and then the same problem started again.
I am beginning to wonder if I need to buy a new hard drive.
If there is anyone who has some answers to help me solve my problem, I would be most grateful.
Robert

When you have the beachball activity, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

Table or view which has complte Pro.Details

Similar Messages

Maybe you are looking for