Table P0185 field in Payslip
Hi Experts,
I have created an Identification Type 04 for Passport. I am able to give passport of employee in Infotype 0185 by selecting subtype 04.
My requirement is to get this passport number maintained in 0185 infotype to payslip of an employee. I have tried the options mentioned below.
1st
In Tcode PE51_Checktab i have maintained table P0185 and feild ICNUM and ICTYP
In Tcode PE51 in the single feild i am calling the table P0185 and feild ICNUM
I am also assigning a rule to the feild. the rule is mentioned below
Rule No C Table Field Off C T C Value1 Value2 Table Newvalue
01 1 * P0185 ICTYP C EQ 04 P0185 ICNUM
Value 04 i have given i.e Identification Type of passport
Inspite maintaining the able config i am not geting Passport Number in Payslip.
Please provide your inputs.
Regards,
Koutilya A.K
Hi Dilek,
I maintained as u said, even then i am not getting the value in payslip.
Please provide your inputs.
Regards,
Koutilya A.K
Similar Messages
-
Dear friends,
We created a field in Infotype 0001 to capture the detail of which section of the department the employee belong to... And our abapers were successful in creating it when we give data it gets updated..
Now we have to bring that in the payslip..Previously we had both department and section in our payslip but we displayed the dept as Branch office name and in the section field we displayed the dept he belong to...
Now we corrected and displayed the department in the dept field and we want to display the section data which we capture using the new field created in IT0001 in the Section field in payslip...
Pls guide me with what are the steps to be followed to display the section data in the section field in payslip...
Now the status is when i go to SE11 and give P0001 and the new section field is there under .Include..
From here how should i move ahead...Pls guide me
Ready to give full marks to all those help me solve this issue.
Thanks
NelsonHi Akshay...thanks a lot...i was able to include in the P0001 table and i selected that field...but when i run the simulation i didnt get that section data in that field in the payslip...
But i checked the IT0001 the section field contains the data as "Accounts"...but i am not sure why its not getting reflected in the payslip...
Do u see any other reasons... should i need to make anyother changes also?
Pls guide me..
Thanks
Nelson -
How to pass the values from internal table to field groups
hi all,
how can i pass the internal table values to field groups?
already field groups are holding some values.. INSERT STATEMENT IS NOT WORKING as it is ovewriting the existing values..
Use full answers will be rewared.
Thanks.
Moderator message - duplicate post locked
Edited by: Rob Burbank on Jun 23, 2009 9:51 AMHi,
You can use INSERT statement to put a work area of an Internal table in Field-group
and use Extract to get info out of it.
Hope it helps,
Raj -
About Asset report - table and fields
Hi ,
I am developing an Asset Report, I need table and field names for following -
a) GL A/C P&L
b) ASSET DEPRECIATION SCHEDULED
c) FORCASTED DEPRECIATION
d) PLANNED EXPENSES VERSES ACTUAL EXPENSES
e) GAP DEPRECIATION CATEGORY
e) When user enters the asset into SAP, the depreciation expense will automatically book to the sub-ledger. However in order to get the amount on the general ledger, which would be closed for prior periods, user must book a manual entry. So , I need this manual entry field.
Please guide me.
Regards,
Narayanproblem solved
-
Sale Order Item Level Text Field which table and field
Hi,
Thanks for your prompt reply and best solution.
Can you please tell me one more thing, in sale order at item level the TEXT Field maintaining by user at transaction level now they want that field in one of the report, so can you please tell what is the table and field where i will get this sale order item level text details.Hello,
is this going to work for item level text as well.
can you tell how to proceed with this functional module
or is there any other thing required.Please elaborate to
understand better way.
You can check out two table in respect to Sales TEXT i.e. STXH (STXD SAPscript text file header) and STXL(SAPscript text file lines).
The best approach of tracing out the Text in respect to Sales Order would be to use the Function module READ_TEXT and put this FM in SE37 and execute with the following parameter.
Client
Text ID of text to be read
Language of text to be read
Name of text to be read
Object of text to be read
Archive handle
Text catalog local
When you are essentially looking to read item level Text with respect to Sales Order then your Text OBject would be VBBP.
Regards,
Sarthak -
Sales order item level partial delivery field table and field?
Will anyone share your expertise, In SD sales order level, at item what is the table and field name in which the partial delivery status is stored. I want the table and field name?. will anyone share pl.
Hi,
Try with table VBUP - and field LFSTA.
Regards -
How do I find what table a field is in?
Hi,
If I know a field name, how would I search the Data Dictionary to find the table (or tables) that the field is found in?
For example, I have a program spec that that says field AZSUB is in table MARM, but it is not. How can I find what table this field is actualkly in?
Thanks for your help!
AndyHi Andrew,
Just goto se11, enter the data element of that field and clisk on the where used list on the application tool bar. You will get all the tables in which the field appears.
You got find out which would be your appropriate table may be using by the description of the table or the contents or by the links..
Regards,
Vinod Kumar -
Disable / enable table control field at runtime
hi ,
i am working on a custom transaction in which i have a table control...depending on a table value i have to disable an input field inside the table control...
i know in a normal field we use
loop at screen.
if screen- name = 'XXX' or screen-group = 'XXX'
screen-output = 0.
endif.
but inside a table control field how to modify it.
Regards
Harish RamakrishnanAll you need to do is put some code in a module of your PBO. This will change the cell attribute of a single row.
PROCESS BEFORE OUTPUT.
* PBO FLOW LOGIC FOR TABLECONTROL 'I_INTRCON'
* MODULE I_INTRCON_CHANGE_TC_ATTR.
* MODULE I_INTRCON_CHANGE_COL_ATTR.
LOOP AT I_INTR
WITH CONTROL I_INTRCON
CURSOR I_INTRCON-CURRENT_LINE.
<b> MODULE I_INTRCON_CHANGE_FIELD_ATTR.</b>
ENDLOOP.
MODULE SET_CURSOR_FIELD.
MODULE STATUS_0200.
module i_intrcon_change_field_attr output.
modify i_intr index i_intrcon-current_line.
if i_intr-check = 'X'.
loop at screen.
if screen-name = 'I_INTR-RCVQTY'.
screen-input = '1'.
endif.
modify screen.
endloop.
endif.
endmodule.
Regards,
RIch Heilman -
Table with fields containig more thn 300 characters
Hello Friends,
i want to create one ZTABLE and intht i want a field tht can store more thn 300 characters.
i have used string data type for the same but while activating the table its giving me error saying :
" Table contains more than 3 long string fields"
Pls suggest...
Sunnyhi
sunny ,
You can create table with field more than 300 characters but there should be one more field
which has to be primary key .
such as
create table ztest
in that create field MANDT type clnt size 3 primary key
name type String .
then change technical settings according to requirement .
Delivery maintenance
delivery class and Data Browser/Table View M
according to requirement .
Before activating table save technical setting and then activate .
Regards
deepak -
What are the tables and fields in fico & sd module
what are the tables and fields in fico & sd module
Hi,
<b> Sales and Distribution:</b>
Customers KNA1 General Data
KNB1 Customer Master Co. Code Data (payment method, reconciliation acct)
KNB4 Customer Payment History
KNB5 Customer Master Dunning info
KNBK Customer Master Bank Data
KNKA Customer Master Credit Mgmt.
KNKK Customer Master Credit Control Area Data (credit limits)
KNVV Sales Area Data (terms, order probability)
KNVI Customer Master Tax Indicator
KNVP Partner Function key
KNVD Output type
KNVS Customer Master Ship Data
KLPA Customer/Vendor Link
Sales Documents VBAKUK VBAK + VBUK
VBUK Header Status and Administrative Data
VBAK Sales Document Header Data
VBKD Sales Document Business Data
VBUP Item Status VBAP Sales Document Item Data
VBPA Partners
VBFA Document Flow
VBEP Sales Document Schedule Line
VBBE Sales Requirements: Individual Records
SD Delivery DocumeLIPS Delivery Document item data, includes referencing PO
LIKP Delivery Document Header data
Billing Document VBRK Billing Document Header
VBRP Billing Document Item
SD Shipping Unit VEKP Shipping Unit Item (Content)
VEPO Shipping Unit Header
<b>Financial Accounting</b>
FBAS Financial Accounting Basis
BKPF Accounting Document Header BUKRS / BELNR / GJAHR
BSEG Accounting Document Segment BUKRS / BELNR / GJAHR / BUZEI
BSIP Index for Vendor Validation of Double BUKRS / LIFNR / WAERS / BLDAT /
Documents XBLNR / WRBTR / BELNR / GJAHR / BUZEI
BVOR Inter Company Posting Procedure BVORG / BUKRS / GJAHR / BELNR
EBKPF Accounting Document Header (docs from GLSBK / BELNR / GJHAR / GLEBK
External Systems)
FRUN Run Date of a Program PRGID
KLPA Customer / Vendor Linking NKULI / NBUKR / NKOAR / PNTYP
/ VKULI / VBUKR / VKOAR
KNB4 Customer Payment History KUNNR / BUKRS
KNB5 Customer Master Dunning Data KUNNR / BUKRS / MABER
KNBK Customer Master Bank Details KUNNR / BANKS / BANKL / BANKN
KNC1 Customer Master Transaction Figures KUNNR / BUKRS / GJHAR
KNC3 Customer Master Special GL Transactions KUNNR / BUKRS / GJAHR / SHBKZ
Figures
LFB5 Vendor Master Dunning Data LIFNR / BUKRS / MABER
LFBK Vendor Master Bank Details LIFNR / BANKS / BANKL / BANKN
LFC1 Vendor Master Transaction Figures LIFNR / BUKRS / GJHAR
LFC3 Vendor Master Special GL Transactions LIFNR / BUKRS / GJHAR / SHBKZ
Figures
VBKPF Document Header for Document Parking AUSBK / BUKRS / BELNR / GJHAR
FBASCORE Financial Accounting General Services Basis
KNB1 Customer Master (Company Code) KUNNR / BUKRS
LFA1 Vendor Master (General Section) LIFNR
LFB1 Vendor Master (company Code Section) LIFNR / BUKRS
SKA1 G/L Account Master (Chart of Accounts) KTOPL / SAKNR
SKAT G/L Account Master (Chart of Accounts SPRAS / KTOPL / SAKNR
Description)
MAHNS Accounts Blocked by Dunning Selection KOART / BUKRS / KONKO / MABER
MHNK Dunning Data (Account Entries) LAUFD / LAUFI / KOART / BUKRS /
KUNNR / LIFNR / CPDKY / SKNRZE /
SMABER / SMAHSK / BUSAB
FI-GL-GL (FBS) General Ledger Accounting: Basic Functions- G/L Accounts
SKAS G/L Account Master (Chart of Accounts SPRAS / KTOPL / SAKNR / SCHLW
Key Word list)
SKB1 G/L Account Master (Company Code) BUKRS / SAKNR
FI-GL-GL (FBSC) General Ledger Accounting: Basic
Functions - R/3 Customizing for G/L Accounts
FIGLREP Settings for G/L Posting Reports MANDT
TSAKR Create G/L account with reference BUKRS / SAKNR
FI-GL-GL (FFE) General Ledger Accounting: Basic
Functions - Fast Data Entry
KOMU Account Assignment Templates for G/L KMNAM / KMZEI
Account items
FI-AR-AR (FBD) Accounts Receivable: Basic Functions - Customers
KNKA Customer Master Credit Management : KUNNR
Central Data
KNKK Customer Master Credit Management : KUNNR / KKBER
Control Area Data
KNKKF1 Credit Management : FI Status data LOGSYS / KUNNR / KKBER / REGUL
RFRR Accounting Data A/R and A/P RELID / SRTFD / SRTF2
Information System
FI-BL-PT Bank Accounting: Payment (BFIBL_CHECK_D) Transactions General Sections
PAYR Payment Medium File ZBUKR / HBKID / HKTID / RZAWE /
CHECT
PCEC Pre-numbered Check ZBUKR / HBKID / HKTID / STAPL
FI-BL-PT-AP(FMZA)Bank Accounting: Payment Transactions Automatic Payments
F111G Global Settings for Payment Program for MANDT
Payment Requests
FDZA Cash Management Line Items in Payment KEYNO
Requests
PAYRQ Payment Requests KEYNO
Hope this solves your concern...
Regards,
Habeeb
Assign points if helpful -
Help needed in Table and field
Hi all,
can any one tell me the table and field to get basic unit of measure and unit of issue.
I guess both are different.
ThanksFor base unit of measure, uom, T006 is the main table.But whereever you have a quantity yu will find UOM in that table. The field is MEINS.
when you say unit of issue, you mean actual unit of measure right?
In that case it again depends on what you are looking at. Example
in table LIPS there is base UOM and Actual UOM.
base is always "MEINS" and actual is "LFIMG" in this case.
So get the table in your functional area and check for the actual uom field in SE11.
Regards
Message was edited by:
Sandeep Bhavsar -
Table and field for Department ID, Department ID desc, and DIV
Hi,
We're planning to develop a "Z" report, by extending CJI3 transaction. I want to add the following fields to this new report. I just wanted to know from what tables these fields are coming from standard SAP (I believe these fields might be related to controlling, so I'm posting in this forum):
1. Department ID
2. Department ID Description
3. Division (DIV)
AmanHi Asim ,
The currency in Material Master is updated from the Company Code.
At first system checks the company code for which the Plant is assigned and picks the currecy from the company code.
You can find the same in Table T001 ; Field - WAERS
What do u mean by Product ID ? Let me know where does it exist in Material Master.
If you know the view, press F1 and then Technical Inf to get the table and Field Name.
Regards
Ramesh Ch -
Table and field for the given object
Hi all,
We are developing a report , i need following table and fields. Could you please help me on this?
Supplier
No of approval required
Approval status
Approval pending with
In approval since
Thanks in advance , will appriciate any input
HareeshaHi ,
Still am not able to find out the FM/ table whom its pending for approval (shopping cart). Could you please help me on this?
(E.g: Shopping cart got created and having 7 levels of approval (Manager1, 2, 3,4,5,6 and 7),let us say First 2 manageru2019s approved, 3rd manager has to approve the Shopping cart, we need to pull these information of pending with 3rd manager in our Z-report )
Thanks in advance
Harish -
Sub Contracting PO- Table and Fields for Materials sent
Dear Friends,
I am preparing a functional spec for the sub contracting PO.
Can you pls provide information about the tables and fields from where the data about the materials to be sent to subcontractor are picked?
Its picking from the structure MDPM. But pls throw some light on the same how the data is picked and printed in PO from certain tables.
Thanks in advance
ShashidharDear Shash,
Here some details of table infirmation not only your related feild available in all feilds
http://www.erpgenie.com/sap/abap/tables_fi.htm
Hope this helps you
Prem. -
Key Figure Reference table and fields
I am getting the following error:
/BIC/CSSMMIMI1-/BIC/KFMI_LCHF (specify reference table AND reference field)
I am aware that it is asking me to put a reference table and field for the field in the structure.
However, what I am not sure about is should I do this action from SE11 or is there a program or other method which would be more suitable (this is not business content)?
ThanksHi Edwin,
Thanks for that, the currency type and quantity type are hard coded in the key figure for most of the key figures apart from one, i.e for the quanity I hard code PCS
From RSD2 I just check the repair option is that correct
Maybe you are looking for
-
Canon digital camera utilities
I've just got a new laptop with OS X 10.6 on which replaces my old one with OS X 10.4. I need to install the software for the Canon digital cameras but can only find 'updater' downloads for 10.6 which rely on you having the original installed on your
-
I've just converted a couple of 6i client server forms to 10g. I'm using the Developer suite 10gR2, with its own built-in oc4j server. It all works fine, after some fiddling to get icons loaded etc. But the form is 10 times slower than in client-serv
-
Hi All - I've been using Dreamweaver off and on for my website. Recently I've discovered I'm having a problem with my images. I had to create a new page for my upcoming HS Reunion and since I've uploaded the page and images, you can see the images. T
-
I/O problems after installing latest 10.5.2 update
Since the last 10.5.2 update, when I close the lid on my 15 inch MacBook Pro, it goes into sleep mode, even though I have an external keyboard, mouse and LCD monitored plugged in. Before the latest update, I used to be able to close the lid and work
-
Trouble Exporting MXF from PP Cs6
Hello, I am having a lot of trouble exporting a sequence of mxf footage out of premiere pro cs6. Whenever I try to export directly from Premiere the program stalls out. I tried sending it to adobe media encoder, which worked temporarily. Now, the seq