Table row does not flow to next page

Hi,
I am using deep structure table in adobe form but the content is not flowing to next page.
I have wraped the table in subform, Body Page, subform and table all are flowed and allow page breaks with content is also ticked, still the table row does not flow to next page.
Regards,
Kimaya

Hi Kimaya,
Just drag the table directly on the body page and execute the form. This should take care of the properties required for data to flow on the form.
Thanks

Similar Messages

Flowable Form does not flow onto next page

I have created a form with a table wrapped in a subform and made it flowable and each field expandable. That part works great. However, I cannot get the content to flow to a subsequent page. When the content is too large for the page, it just keeps pushing down beyond the bottom of the form where I cannot even access it.
The form contains a table of three rows and within each of those rows, all but one column contain a table of three rows. The highest level table is wrapped in a subform and it is marked as flowed with each text field set to expand to fit. I've selected every row and subform I can and checked the box "Allow page breaks within content". The forms still does not break at the end of the page but just keeps pushing the data down off the page.
Any help you could give me would be greatly appreciated. Thanks.

Thank you for your assistance. However, that subform is flowed and Allow page breaks within content is checked.
Is there something under pagination for that subform that I might need to do. I tried creating a page 2 and intended to set the Overflow on the pagination tab to page 2 but that is not an option. I can only set this to PageArea1 or ContentArea1 which I see are objects in the master pages and I do not have a page 2 in master pages. Is that the key?

Internal Table data is not overflowing into Next Page - Adobeforms

Hi,
     I have an issue if the internal table consits of more than 20 records that data is not overflowing into next page.
     Here am using Header only on first page & Table will follows...
Regards,
PraVeen..
Edited by: praveenreddys on Feb 15, 2012 10:51 PM

Hi praveenreddys ,
I had the same requirement, I did as follows:
LEFT HAND SIDE SELECT "TABLE": check below right hand side properties for this object
1. table tab: select the check box allow page breaks within content.
2. pagination tab: place: Following previous
                            after:continue filling parent
                           overflow: none.
LEFT HAND SIDE SELECT "HEADER": check below right hand side properties for this object
3. row tab: select the check box allow page breaks within content.
4. pagination tab: place: Following previous
                            after:continue filling parent
                           overflow: none.
select the check boxes: Include header row in initial page
                                        include header row in subsequent pages
Binding tab property:
5.select check box: Repeat row for each data item
LEFT HAND SIDE SELECT "ROW": check below right hand side properties for this object
6. Row tab: DON'T select the chek box allow page breaks with in content
4. pagination tab: place: Following previous
                            after:continue filling parent
                           overflow: none.
Binding tab property:
5.select check box: Repeat row for each data item
Then test..it would work for you...ALL THE BEST!!!
If this helps please reward points.
Reards,
Naresh.

The table content is not printed on next page.

I made a form with a internal table which have so many rows.
The Internal table's content is printed on only one page.
Absolutely, the internal table has rows enough to be printed more than two pages.
What I have problem? I looked around SDN related document.
Some SDN peer say "How about usinge subform?".....
If the subform is way to sovle this problem, Let me know on that in detail.
Regards Etnaya

> Hi Junha,
>
> Use a 2-Level Subform hierarchy.
>
> The Top Subform (Parent) should have the following
> settings:-
>
> 1. The Type (In Palettes->Object->subform)
> should be Flow Content
> 2. The Flow Direction should be of Type
> Table.
> 3. Check the box for Allow Page breake
> within Contents
>
> The Child Subformshould have the following
> settings:-
>
> 1. The Type (In Palettes->Object->subform)
> should be Flow Content
> 2. The Flow Direction should be of Type
> Table Row.
> 3. Check the box for Allow Page breake
> within Contents.
> 4. Also Check the box in the binding
> tab for Repeat Subform for each Data Item and
> set the Minimum count to 1
I'm affraid Poojith M V is using an older version of Adobe Designer (not 7.1).
Above comments on Table design are not applicable to the Designer 7.1, where absolutely new mechanism of table design was implemented.
With latest version of Designer using 2-level Subform becomes unneede - Body page with table included directly in it should be enough.
Regards,
Petr Perstnev

Pressing mouse wheel (or Ctrl + Left Mouse Click) on navigation arrows does not open previous/next page in new tab anymore

I am using the new Firefox Developer Edition as a stand-alone on Ubuntu, so I can still use the "old" version, too.
Everything seems to be working fine, as in I am logged in and setup sync. But a few features I got very much used to are no longer working.
When I click on "About Firefox Developer Edition", it shows these details:
Firefox Developer Edition 36.0a2 (2014-12-09)
Firefox Developer Edition is up to date
You are currently on the aurora update channel.
In my "old" Firefox, I can:
1. Click with the mouse wheel on the navigation arrows to open the previous or next page in a new tab.
2. "right mouse click" on the navigation arrows to see the list of previously visited pages of the current tab, and the ones I visited after the page I am on, if I clicked "back" once or more times. I can then click the mouse wheel or "Ctrl + Left Mouse Button" to open any of the pages in the list in a new tab.
None of this works in the Developer Edition.

To clarify, the list of previously or later visited pages does still show up when I right click on the navigation arrows in the Developer Version, but I cannot open any of the links in the list in a new tab with the mouse wheel or "Ctrl + Left Mouse Click".

Help Req'd! - Table will not flow onto next page!

Hello!
I am currently doing some form design for a large SAP project in the UK and am having problems with getting a table on a remiitance advice form ive created to flow onto a new page.
currently my form is configured as follows:
- saved as a dynamic pdf.
- 2 master pages: the first containing text fields for form title, company logo, addresses, and a disclaimer at the bottom, page numbering, as well as a border created with rectangles. The second contains all of the above except the addresses.
- 1 body page: contains a subform set to flowed (top to bottom) which contains a table with header/data/footer rows. The data row is set to repeat data so as to expand when there is more than 1 dataset.
i have tried playing with content areas but they will not stay at the size to which i draw them and then cannot be manipulated afterwards, also i only have pagination settings available to me on the body page itself in the hierachy. the subform inside it, and the table inside that, have greyed out pagination settings.
finally the body page is set to positioned at present as setting it to flowed causes the subform containing the table to shoot to the top of the page!
The problem I am getting is that the table when containing lots of data just runs off the end of the page!!
Any ideas much appreciated!
Thanks!!
Edited by: Ryan Harris on Jul 3, 2008 1:05 PM

Basically you can tell the bodypage to overflow to the second masterpage when it runs out of space.
On the bodypage properties that's done within the pagination tab.
Make sure that you enable the "Allow page breaks in contents" tickbox.
By the way, just wondering, how did you save the form as dynamic, since dynamic is only enabled in the SAP world by setting a dynamic/enabled flag.
If you are testing outside of sap in the LiveCycle designer you might want to close the file and then reopen it, after you saved it as dynamic. There's a nifty setting in the LiveCycle designer properties which enables you to create dynamic pages by default. It's in the LiveCycle Designer Options.

How to make text elements flow to next page depending on the table above it in main window (smart forms)

Hi all,
In my main window i have a table that contains line item data.
Just below that i need to display text elemet (some text and terms & conditions).
as below
Based on the items in table, it should flow to next page. But it is not happening. rather the data which do not fit into first page gets deleted.
Please help to solve this. Its urgent.
Thanks in advance

Hi Rashmi,
please drop these texts from your table footer (i hope you have put into footer of your table), just create a template after your table and put your all these data within this template and make sure that your this
template should be called after your tables data get displayed.
Or you can create a text , after your table where you put your data, and it should get displayed when the line items ends for your table.

Header Area of Table is not printing on Next Page in SMARTFORM

Hi All,
I am facing one problem while Developing a smartform for Delivery.
I want the same data to be copied to the Next page which is coming on first page. I copied the Main window to Next page with all the details but the Header of the Table is not printing on the Next(Second) page.
Please help me out regarding this...
Thanks in advance for your help....
Thanks & Regards,
Digamber

Hi,
If you are talking about the table (which you created in the main window) and you want the header of the table to be printed on the next page. Is it because of overflowing that's why its printed to the next page?
If yes, the header cannot be printout out.
Just for your information. If you want a window in the first page to be copied to all subsequence pages, set the window type to be copies window.
Hope it helps.

Trying to access row values in a table which does not have any rows yet

try{
                         MappedRecord importParams = recordFactory.createMappedRecord("CONTAINER_OF_IMPORT_PARAMS");
                         IFunction function1 = client.getFunctionsMetaData().getFunction(funModGetDet);
                         IStructureFactory strucFact = interaction.retrieveStructureFactory();
                         response.write("try2 :"+pnumber);
                        IRecord structure = (IRecord) strucFact.getStructure(function1.getParameter("PERNR_TAB").getStructure());
                         response.write("try111 :"+pnumber);
                         structure.setString("PERNR",pnumber);
I am getting the following error "Trying to access row values in a table which does not have any rows yet " where PERNR_TAB is a table containing field "PERNR".
Can anybody help me out?

Please re-post this question in the appropriate forum. It seems to have nothing to do with Web Dynpro.

New field in ODS - data value does not flow after activation

Hi,
We have an ODS with some data in it. Now i added a new key figure to the ODS and changed the transfer and update rules accordingly.
The value for this key figure appears in the PSA and the ODS table *40 (before activation table), but after activation the value does not flow to the activated ODS table *00.
Any idea why this is happening?
Pl let me know.
Regards,
Pradhiba

Hi Pratibha
I did not found anything wrong with key figure 0OI_WRBTR in BW system.
Please check the contents of active table in *00 table using SE16 and also using tcode LISTCUBE.
I hope you are not selecting wrong key figure while looking at active data of ODS.
Regards
Pradip

Lightroom 5 file edited in photoshop cc 2014 does not appear back next to original after save. Is anyone else having this issue? If so what is the fix. The edited image appears back in lightroom in a new folder.

Lightroom 5 file edited in photoshop cc 2014 does not appear back next to original after save. Is anyone else having this issue? If so what is the fix. The edited image appears back in lightroom in a new folder.

I'm performing a normal "Save", not "Save As". Work flow I'm using is as follows: Select photo in Lightroom 5.7 >" Edit In" Photoshop CC 2014 > (after working on photo is PS) > Save > close PS. Photo returns to Lightroom 5.7 in a new folder rather than next to the original. Prior to purchasing the monthly plan and upgrading to PS CC 2014, I performed this same work flow using Lightroom 5.6 and Photoshop CS6 without any issues.
Just for fun... I attempted to move the edited file back into the original folder. I received a prompt that said the file already existed in the original folder, however I can't see it except the new folder that LR created. I tried several different sort orders, etc without any success.
*** Follow up: Was unable to resolve the issue using Photoshop CC 2014. Uninstalled PS CC 2014 and went back to using Photoshop CS6. Return trips from LR 5.7 to Photoshop is now performing as it should: returning edited photo back to the original folder in LR 5 and placing next to the original image.
Should anyone have a suggestion on getting Photoshop CC 2014 to do the same, I would love to be educated.
Thanks for the help, dj_paige.

Link Reports -item does not exists on this page

I have two tables Person table with Primary Key of PersonID, and Person_Qualification Table with a FK of Person_ID.
I have a report for each table. I have created a report on the Person Table(Page 3000) with a link column to the Person Qualification Report (Page 3119).
In the link column I created in the person report I have my parameters set as P3000_PersonID and #Person_ID# as field to populate the URL with, and the target page as 3119.
However anytime I click this link that takes me to the PersonQualification report I get an error stating the Item P3000_Person ID does not exists on this page (3119).
I have linked a form and report together before, but not two reports.
I want the person qualification report to be only for the personID that was clicked on.
I tried adding P3000_PersonID to the query in the person_qualification page I.E. where PersonID=:P3000_PersonID but I still get the item P3000_Person ID does not exists on this page or something to this effect.
Thanks

Hello gtjr,
You need to define an item (usually hidden) on page 3119 to hold the person ID and use that in your second report's query.
Then in the column link for the first report, specify this new item to be set to the person ID linked.
The reason for the error is you're telling ApEx to set an item p3000_person_id on page 3119, but that item doesn't exist on page 3119.
Hope this helps,
John
Please remember to reward helpful or correct responses. :-)

To display vline if main window flows to next page in SAPScript.

Hello,
We are facing issue that we have to put vertical line at the end of page , if main window flows to next page.
In our case, we have payment done for different currencies as well, so that means if for first currency USD we have 20 records then after 16 records page gets break then we want sy-vline to print there and next 4 records in next page, similarily for next currency EUR, then if we have 4 records it gets displayed on one page only, so no vline is required then.
So like this if we have 3 pages to be displayed then on first page it should displayed vline as records gets overflowed.
May be in Script we can have more than 3 pages as well, so at different currency when we have more records then only it should show vline, otherwise not.
Also we have signature window inside main window, so on next page it should not display line after signature.
So please help us for finding the solution to this issue as its really urgent.
Thanks.

Hi friend,
So as of now you know that the line count for a page is 16.
So after displaying records in main window just check the sy-index or keep a variable incremental for the loop.
Check whether the variable count is 16 and put a sy-vline. So if we have less number of records or if we have a signature window the vline wont be executed.
This will only be executed when there are 16 records for a page. So for better handling you can use the number of lines per page dynamically. Ie to know the size of lines in the page dynamically.
Else use of end of page command to draw lines at the end of page. But the end of page command should be used inside an if else command.
See the link below for more options in Scripts Link : [Editing Format Actions|http://help.sap.com/saphelp_nw70/helpdata/en/ce/6f0f82ea6311d18e2f0000e83dd9fc/content.htm]
I think this solves your issue. Please revert back to me if you face any issues. I will help you.
Thanks,
Sri Hari
Edited by: srihari.kumar on Jan 31, 2012 4:27 PM

When I click the Editor, it loads but does not open the Editor page. Options?

When I click the Editor, it loads but does not open the Editor page. Options?

Try making separate desktop icons for the Editor and Organizer. You can then launch directly. The standard desktop icon is for the welcome screen which often runs in the background or doesn’t shut down properly.
Start by right-clicking on the desktop and select:
New >> Shortcut
Then browse to:
C:\Program Files\Adobe\Photoshop Elements 13
Inside the Photoshop Elements 13 folder make sure you select the application (not a shortcut) by scrolling down to the files beginning with the letter P and highlighting ‘PhotoshopElementsEditor’
Then click next followed by finish.
You can repeat for the Organizer using the different file path.
New >> Shortcut
Then browse to:
C:\Program Files\Adobe\Elements 13 Organizer
Highlight ‘PhotoshopElementsOrganizer’
Then click next, followed by finish.
Now that you have your separate desktop icons you can delete the one for the welcome screen, if preferred. On Mac try launching directly from Applications. [if not using PSE13 substitute your own version and go to Program Files (x86)]

List does not exist . The page you selected contains a list that does not exists. It may have been deleted by another user

Hi everybody!
I have a sharepoint 2013 farm with 5 sever. I upgraded a site from sharepoint
2007 to sharepoint 2013. I had some problems to install and configure workflow manager and register it. but by now I found problems and I can create a workflow and run it successfully. My big problem is when I try to get a lookup field in my flow. the
flow suspended and I got the following error:
“List does not exist . The page you selected contains a list that does not exists. It may have been deleted by another user.”
Any solution???
Thanks in advance!

Hi,
Please make sure the source list of the lookup column and the list which consumes the content from the lookup column exists on the site collection.
In addition, to correct this problem the following steps should be applied:
Delete the affected Workflow association
Go to "Central Administration" - "Application Management"
Select the affected web application and choose "General Settings" - "Resource Throttling"
Increase the value configured as "List View Lookup Threshold"
Perform an iisreset to ensure that all in memory instances of the web application settings are gone
Add the Workflow association back to the list
More information is here:
http://social.technet.microsoft.com/Forums/en-US/3aeeba20-07dd-4e46-941b-a3db1bb3577e/sharepoint-2013-designer-workflow-the-page-you-selected-contains-a-list-that-does-not-exist?forum=sharepointcustomization
Best Regards
Dennis Guo
TechNet Community Support

Table row does not flow to next page

Similar Messages

Maybe you are looking for