Table: row1 page1, row2 page 2 etc

Hi have used lvecycle before but need bit of help.
I am going to have a table of data.
With columns:
Candidate name, licence number, date of birth
At the press of a button, i want livecycle to use say row 1 candidate name and enter it in a field on page 1, same for the other columns.
If there is more than one row, i want livecycle too add the right number of pages and add the relevant data. Page 2 means use row 2 etc.
Basically, i am creating a dynamic pdf that will allow a user to enter candidates details that were on a course and then print their certificates all at once. Obviously their will be a master tempate so only the name, licence number and date of birth will change depending on the data entered into the table.
Any ideas.
Thanks
Will

I'm looking for an answer to this as well...

Similar Messages

How to create a Table of Contents using Pages 09?

Hi guys,
I have little problems creating a Table of Contents in Pages, though it seems quite simple. I'm working with the template 'Term Paper' and I use paragraph styles (Title, Heading I, II, etc.). I have some very long documents (about 80 pages long) so I wanted to create a TOC (using sections) but it says:
The table of contents is empty because none of the paragraph styles selected in the Document Inspector are used in the document.
When I compare the paragraph styles I do use and the paragraph styles in the Document Inspector, they match. So I'm a bit upset about this because I really need to use this great feature!
Thanks for you answers guys!

I would say: Try and Error. Create a copy of your document and unmark in the copied document in the document inspector all boxes for the TOC. Then mark them again. Maybe you should also delete the paragraph styles and mark them again. If that doesn't work, try to copy the complete text of your document to a new created one. Maybe that works.
Good luck!
P.S.: If that doesn't work look here. Maybe this helps.

I need the dialog box (which contains page selection etC) HOW TO MAKE IT?

hi
i have done an requirement in smartforms.
i need the dialog box (which contains output device name, page selection etc) when i take the print (smartforms).
And now i already can see a dialog box .but still it doesn't have the page selection.
I mean if the smartforms which have 5 pages,and what i need is just print the page 1 and page 3 . so I need the page selection
which can help me on this issue.
Would anyone know something about it and give me some advice . I will be appericate it.

Hi,
Just check with the control parameters of the function module, if you have changed any of it.
If you have changed it then try to give the no-dialog field of the control parameter table as space.
If the dialog box which gives you the Output device name and others appears then just below the output device name you have the column for the page selection.Just pass the values of the pages separating them with comma(like 2, 5 will print second and fifth pages) and it prints only those pages.
Regards
Sarves

Table of contents in Pages - can't get it to work

Tried creating a Table of Contents in pages
Marked my headlines, changed them into title, heading and subheading.
When everything needed was changed into proper format, I wanted to insert the table of contents from the menu. I get the error message, that no text is formatted in the correct way and therefore my table of contents can't be created.
I previously used MS Office - and creating a table of contents works in the same way. I have read the users guide for Pages, trying to figure out what I've done wrong - but it didn't work out.
If anybody could solve this peace of mystery I'll be very thankful
Maria

Hi Terry,
you helped Maria so well. Maybe you can help me aswell ... I just started using Pages (trial version) and have used MS Office before that. I want to create a TOC based on styles that are numbered as follows: 1. heading 1
1.1. heading 2
1.1.1. heading 3
1.1.1.1. heading 4 asf.
If I create a numbered style it will only have 1. and no further level (is that the right word? I'm German, sorry!). If I create a style from a numbered list (where it is possible to have different levels) I can create a TOC but have to format that completely aswell (the TOC doesn't have the format of the headings, in particular the numbers are gone and also the format). In MS Word it seems to be much easier. Here I create a style (heading 1, 2, 3, etc.) and can asign numbers and levels to the headings. The TOC shows the exact same format as the headings in the document. How can this be achieved in Pages? Apple should actually do better then MS, shouldn't it?!
Greetings, diescholzens

Can the cell lines be removed from a table inserted in a Pages document?

Can the cell lines be removed from a table inserted in a Pages document?

Inspector > Table > Table > Cell Borders
The buttons immediately below "Cell Borders" allow you to choose left, right, inside, outside etc.
Choose None from the border style Pop-up.
Download the Number'09UserGuide from the Help menu in Pages. Search for borders.
Regards,
Ian.

2 single selection tables on the same page

I used the following great article:
http://blogs.sun.com/roller/page/winston?entry=single_selectable_row_table_component
to create a singlerow select table. But I want 2 of these tables on the same page of my tabset component.
On my page i have:
private TableSelectPhaseListener tablePhaseListener = new TableSelectPhaseListener();
public void setSelected(Object object) {
RowKey rowKey = (RowKey)getValue("#{currentRow.tableRow}");
if (rowKey != null) {
tablePhaseListener.setSelected(rowKey, object);
public Object getSelected(){
RowKey rowKey = (RowKey)getValue("#{currentRow.tableRow}");
return tablePhaseListener.getSelected(rowKey);
public Object getSelectedValue() {
RowKey rowKey = (RowKey)getValue("#{currentRow.tableRow}");
return (rowKey != null) ? rowKey.getRowId() : null;
public boolean getSelectedState() {
RowKey rowKey = (RowKey)getValue("#{currentRow.tableRow}");
return tablePhaseListener.isSelected(rowKey);
but when I added the second table, I had to add the duplicate the above 4 methods, changing currentRow to currentRow2 and tablePhaseListener to tablePhaseListener2, and changing the method names. I also had to make these updates in 2 other places---on the JSP code, as well as in the JavaScript!! For just 2 tables this isn't too bad, but with more tables having to synchronize everything could get real ugly real fast. Am I doing something wrong?
Also,
It seems to work, however my IE browser is still reporting some minor Javascript errors that I don't get when I had only 1 single-row select table
Thanks,
-DM

I also went the route of duplicating all methods for the single-selectable row in a table.
I have at most on my pages two tables with selectable rows and I have not run into any javascript issues.
I have had a problem when I rename my tables from "table1" etc. The row selection does not work as well when I give my table objects meaningful names. I have not had the time to dig in and discover why.

Pages 5.2 opens all kinds of other document formats (even old .doc Versions), but cannot open Pages 08 etc. of its own kind? I have to use NeoOffice to open my documents of many years of work. Is there an option to organize a corporate com

Pages 5.2 opens all kinds of other document formats (even old .doc Versions), but cannot open Pages 08 etc. of its own kind?
I have to use NeoOffice to open my documents of many years of work.
Is there an option to organize a corporate complain to Apple to be heard?

We have been doing nothing but for 10 months.
Here is the response:

Can I view the same pdf on multiple iPads at the same time with 1 iPad operating as the master (controlling page turns etc)?

Would like to use 4nr iPads as an autocue system. Can I view the same pdf on multiple iPads at the same time with 1 iPad operating as the master (controlling page turns etc) and the others operating as slaves? Can this be done without the use of 3G or a remote Wifi hub? I would appreciate your input.................

Open the document in Acrobat Reader and use the menu Window > New Window.

Single row editing for multiple tables in a single page

Hi!
I have split a table with many many columns into more tables with a lower number of columns. There is an ID column (sequence generated) that is Primary Key common for all tables. Obviously, the relationship between these tables is 1 to 1, so its not about having to build master-detail pages.
What I need now is to edit all these tables in a single page: one single row from each table. The Automated Row Fetch & Automatic Row Processing (DML) processes used for the old table must be replaced by something else.
Is there a way to use in a single page more pairs of such processes for more tables?
I want to avoid manually writing processes with lot of PL/SQL code to handle row fetch & update.
Keep in mind that the page will have an ID item that can be used to identify unique rows in all my tables.
Thanks,
Sorin

I have split a table with many many columns into more tables with a lower number of columns
IMHO that is a very bad idea. There is nothing wrong with having many columns in a table. If you would like to split them to better "categorize" them, just create views on the table and expose different subsets of the columns.
I want to avoid manually writing processes with lot of PL/SQL code to handle row fetch & update.
That is unavoidable given how you have designed the underlying tables.
You could try creating a view that joins all the tables by the PK and creating a form based on that view. Then write a INSTEAD OF trigger on the view that "doles out" the DML on the view to each of the underlying tables.

How to get the number of rows in a HTML table in some other page

Hi,
I am incrementing HTML table rows on button click and saving number of rows in a javascript variable. But on submitting that page I need that number of row value in the following page
example:
HTML table is in the page first.jsp
and the javascript variable having the current row number is row_number
on submitting it goes to second.jsp page. There i need that row_number value.
Can anyone help me to solve this?
regards,
carry

function buttonClick()
var table = profileTable;
var lnRow = table.rows.length;
var insertedRow = table.insertRow(parseFloat(lnRow));
var cell1 = insertedRow.insertCell();
cell1.innerHTML ="<tr><td><Input type=\"hidden\" >>>name=\"rowNum\" value="+cnt"+></td></tr>";
document.profileform.submit;
on submit it goes to the second page, but the value i got using >>>System.out.println("row number from text >>>box"+request.getParameter("rowNum")); is null. What is wrong with >>>my coding. Can anyone solve this.HI carry
Check the value of bold data
function buttonClick()
var table = profileTable;
var lnRow = table.rows.length;
var insertedRow = table.insertRow(parseFloat(lnRow));var cnt=inRow
var cell1 = insertedRow.insertCell();
cell1.innerHTML ="<tr><td><Input type=\"hidden\" >>>name=\"rowNum\" value="+cnt+"></td></tr>";
document.profileform.submit;
}try with it

How to control selected row in result table on a search page?

Using JDeveloper 10.1.3.2.0
I have attempted to create an ADF page that contains a search and result table in the same page.
I have questions related to the result table. Let's say the result table shows 10 rows per page.
If I page forward there is no default selected row "clicked" on the page. Only if you return to
the very first 10 rows do you see a default selection in row number one of the results.
How would I go about making the first row of each page the default selection?

You'll need to code this into the RangeChangeEvent event of the table.
http://www.oracle.com/technology/products/jdev/htdocs/partners/addins/exchange/jsf/doc/apidocs/oracle/adf/view/faces/component/core/data/CoreTable.html
That said - I'm not sure this will be very helpful for the end user - after all in any case they'll need to first select a row before doing an operation on it.

Question about TextEdit. How do i add a custom header to a multipage document? For example, "Smith, page 2", "Smith, page 3', etc. I can do it in Microsoft Word, but cant figure out how in TextEdit.

How do i add custom headers to a multipage document in TextEdit? i need to add a custom header in upper right of page, for example: "Smith, page 2", "Smith, page 3" etc. The add header setting in Textedit file-print only adds date : time in upper right, with "Page 1 of 3" on bottom right.
Thank you.

It's just a text editor not a word processor.

How to populate a table in the html page from the java script

Hi all,
I have doubt in populating a table in the html page. my application is as follows
I have a html page in which i have a combo box and a table following the combo box.
i have to populate the table depending on the item selected in the combo box.
for this i am using javascript to get the value of combo box onClick
then i have to call some function thru jsp to get the data and then i have to populate the table with thst into from java script
how can i do this, i.e populating html table from java script
Thanks in advance
satya

Hi Mihai,
You can populate data in DO_INIT_CONTEXT method of ur impl class in your Z component.
data:
lv_struct_ref type ref to YOUR_STRUCTURE,
lv_value_node type ref to cl_bsp_wd_value_node,
lv_bo_coll type ref to if_bol_bo_col.
Data: current type ref to if_bol_bo_property_access.
data: dref type ref to data.
data: lv_guid_h type crmt_object_guid.
data: lt_attr type table of YOUR_STRUCTURE.
data: ls_attr type YOUR_STRUCTURE.
data: lr_entity type ref to cl_crm_bol_entity.
create object lv_bo_coll type cl_crm_bol_bo_col.
lt_attr is ur internal table.
Loop at lt_attr into ls_attr.
  create data lv_struct_ref.
  create object lv_value_node
       exporting
            iv_data_ref = lv_struct_ref.
call method lv_value_node->if_bol_bo_property_access~set_property
exporting
iv_attr_name = 'YOURFIELDNAME1'
iv_value = ls_attr-firstname.
call method lv_value_node->if_bol_bo_property_access~set_property
exporting
iv_attr_name = ' YOURFIELDNAME2'
iv_value = ls_attr-lastname.
lv_bo_coll->add( lv_value_node ).
typed_context->YOURCONTEXTNODE->set_collection( lv_bo_coll ).
endloop.
Regards,
Raghu

New hard drive installed on my 2009 mac book. Can I reinstall pages, numbers, etc... from the App Store? I was running Lion.

New hard drive installed on my 2009 mac book. Can I reinstall pages, numbers, etc... from the App Store? I was running Lion.

HI Corey ...
Yes. Make sure you use the same Apple ID.
How to re download apps from the Mac App Store:
Open the App Store. From the menu bar click Store > Sign In
Click Purchases from the top of the App Store window.
Select which apps you want to re download. Then right or control click where you see Installed then click Install.
Make sure and use the same Apple ID used for the original purchase.
If you can't re dowload the apps, launch iTunes. From the iTunes menu bar top of your screen click Store > Authorize This Computer. Sign out of the iTunes store and try re downloading your apps from the App Store again.

My daughter got pages, numbers etc free on her ipad 2 but I can't on my ipad 4. How can I get them free

My daughter got pages, numbers etc free on her ipad 2 but I can't on my ipad 4. How can I get them free

Is your daughter's iPad jailbroken?
How to get all the iWork apps, iPhoto, and iMovie for free on an eligible iPhone or iPad
http://www.imore.com/how-get-all-iwork-apps-iphoto-and-imovie-free-eligible-ipho ne-or-ipad
 Cheers, Tom

Table: row1 page1, row2 page 2 etc

Similar Messages

Maybe you are looking for