Table RSDRHLRUBUFFER entry's
Hi,
In our BI7.9 Production system, there are more than 350 entry's in the table RSDRHLRUBUFFER There is only one record with LOCK_CNT = 0 and rest all having value >=1 and there are few records with below values.
288.999
333.528
374.355
777.631
777.632
777.634
777.637
1.110.944
11.153.205
Is it bad to have this kind of records in table, and if so how to delete these records?
Our BEx reports are giving time_out errors/short dumps, I suspect because of the above entry's in the table.
Hi,
any suggestions pl.
Similar Messages
-
Opening a new view in a new window on click of a table row entry.
Hi Guys,
How to open a new View of a same application in a new window (just like a pop up) on a click of a Table Row entry?
I am using NWDS 7.0 version. So please suggest acccorrdingly.Hi Nikesh,
first of all you will have to declare use of onLeadSelect event handler for your table (note that it will only be triggered when a lead selection occurs not a multiselection).
Also, you can build at design time a View and a Window (for example, PopupWin) in your WebDynpro Component, and embed the view into the window.
In your code for onLeadSelect function, you can use something like this to pop up the window.
public void onActionRowSelection(com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent wdEvent )
//@@begin onActionSeleccionTabla(ServerEvent)
IWDWindowManager windowManager = wdComponentAPI.getWindowManager();
IWDWindowInfo windowInfo = wdComponentAPI.getComponentInfo().findInWindows("PopupWin");
IWDWindow window = windowManager.createModalWindow(windowInfo);
window.setWindowPosition(WDWindowPos.CENTER);
window.setWindowSize(new WDCssSize(450, WDWindowUnitOfLength.PX) , WDCssSize.UNDEFINED);
// Store handle ti window in context attribute to able to close it later
wdContext.currentContextElement().setPopup(window);
window.show();
//@@end
Hope it helps,
David -
Error while creating table "EDISEGMENT' entry 'BIC/CIBA0PLANT_ATTR
While loading master data for 0PLANT, its giving me following error.
"error while creating table "EDISEGMENT' entry 'BIC/CIBA0PLANT_ATTR"
Please help me out.
Thankssteve,
Can you give the solution you used to correct this problem?
This error occurred in BW during import.
Raj. -
Check table TFBEFU_CR: entry 10 does not exist
Dear all
When i am doing GR for Order (T.Code : MB31),the system displays the following message.
Check table TFBEFU_CR: entry 10 does not exist
plz give me the solution as early as possible,bcaz it is very urgent to me.
Thanks in advance.
Regards
Basava sreenuDear Mr.Basava,
I'm not sure,but try with this.
For the particular material which you are using in MB31 for Good's receipt for
Order,check whether the storage location is present in T code MMSC-Extend
material storage location.If not add and save,then try in MB31.
If useful reward points.
Regards
Mangal -
Error while creating table 'EDISEGMENT' entry for Transfer Structures
Hi Guyz...
I've been facing a few issues regarding activation of transfer structures.
I'll explain the whole process...so it makes sense to you guys.
I've initially activated the Transfer Structures in BI Content for Master Data. Later on we faced some issues in the DEV server. So we had to transport all the objects and store them locally on a temporary location. When the BI DEV sever, was up and running, we transported all the objects back to the server.
Now while moving the objects back to the sever. We had an errors in the Master Data Request (Log- Method Execution). After going into the log...this is what I found.
Error while creating table 'EDISEGMENT' entry '/BIC/CIIA0DIVISION_TEXT'
Error while creating table 'EDISEGMENT' entry '/BIC/CIIA0DISTR_CHAN_TEXT'
Error while creating table 'EDISEGMENT' entry '/BIC/CIIA0MATL_TYPE_TEXT'
Error while creating table 'EDISEGMENT' entry '/BIC/CIIA0SALESORG_TEXT'
Error while creating table 'EDISEGMENT' entry '/BIC/CIIA0SALES_GRP_TEXT'
I hope, I am clear here.
Any suggestions, guys...
Thanks,
Regards,
GHi,
Please check this link:
Error while creating table EDISEGMENT entry
Hope it helps.
Thanks and Regards,
MuraliManohar. -
Error while creating table 'EDISEGMENT' entry '/BIC/CIBD0BILBLK_DL_TEXT'
Hi All,
I am getting a error"Error while creating table 'EDISEGMENT' entry", when running the program RS_Transtru ActivateAll to activate the transfer rules as we had reconnected our source system,
we are on 2004s server and on SP level 17, I understand that this issue is created as the transfer rules are using IDOC as transfer method, and I Cannot manually change the transfer method to PSA and activate as the number of transfer rules with this issue are huge in number.
Please suggest the suitable solution
Thank you in advance
krishna
Edited by: krishna dvs on Feb 17, 2009 1:24 PMHi,
Please check the note 493422. The reports listed in the note
should correct the inconsistencies and afterwards you can re-import the
request and it should then work.
Regards,
Srikanth -
Error while creating table 'EDISEGMENT' entry '/BIC/CIWA0TRZONE_TEXT'
Hi experts,
when I import my transport request to QA, I am getting this error
"Error while creating table 'EDISEGMENT' entry '/BIC/CIWA0TRZONE_TEXT'"
the performance assistance reads as below..
Message no. EA201
Diagnosis
An attempt was made to create the entry '/BIC/CIWA0TRZONE_TEXT' in table 'EDISEGMENT'. The attempt failed.
System response
The operation was canceled.
Procedure
Please check whether the relevant entry already exists
I have an entry for '/BIC/CIWA0TRZONE_TEXT' in the table 'EDISEGMENT' do need to delete it before importing the transport. How to delete this entry, I donot see the options in SE11 /SE16..
thanks in advance
D BretHi,
can you please be more precise with your enquiry?
As far as I read the note, it is quite explanatory....
What is your source system release?
You'll need to implement this prog in your source system and execute it there.
If everything works and is fine, import to program in your QA/PROD source systems and rexecute it as specified in the note...
does it answer your question
Olivier. -
Error while creating table 'EDISEGMENT' entry '/BIC/CIBB0DISTR_CHAN_TEXT'
When I am activating the transfer rules of 0divison_text giving me the error
Error while creating table 'EDISEGMENT' entry '/BIC/CIBB0DISTR_CHAN_TEXT'
Message no. EA201
Diagnosis
An attempt was made to create the entry '/BIC/CIBB0DISTR_CHAN_TEXT' in table 'EDISEGMENT'. The attempt failed.
System Response
The operation was canceled.
Procedure
Please check whether the relevant entry already exists.
I have checked the note 493422 but I did not understand it can any one help me in this
I am working on 7.o with SP SAPKW70010Hi Priya,
Delete entries for the data source in ROOSGEN, EDISEGMENT and EDSAPPL tables, both on ECC and BI sides.
Try activating the infosource again. This should solve your problem.
Sasi -
Error while creating table 'EDISEGMENT' entry '/BIC/CIAC0CLASS_NUM_TEXT'
Hello,
I get the error message:
"Error while creating table 'EDISEGMENT' entry '/BIC/CIAC0CLASS_NUM_TEXT'"
when trying to activate my inactive transfer structure for 0CLASS_NUM_TEXT..
Many other transfer structures work fine, but this one is really problematic.
Has anyone seen it before? What do i do to solve it?
Regards,
F CHi,
Please check the note 493422. The reports listed in the note
should correct the inconsistencies and afterwards you can re-import the
request and it should then work.
Regards,
Srikanth -
Error "Check Table TFBEFU_CR : entry 10 does not exist" getting
Hi All ,
While doing Goods Receipt for Prodn Order , error "Check Table TFBEFU_CR : entry 10 does not exist" getting Prompted.
Could u pls help me to solve it
Regards
Sandeepyou need to apply the OSS note 107588. it is excatly for the same problem yoy mentioned here.
check the note -
Table T169P: entry 1000 does not exist
Hi,
While doing the Goods Receipt, against Purchase Order, the following error is coming:
Table T169P: entry 1000 does not exist
Please guide.
Regards,Hi All,
Issued resolved.
Table 169P refers to Parameters, Invoice Verification. This is available under
IMG>Materials Management>Logistics Invoice Verification>Incoming Invoice>Set Check for Duplicate invoices.
Regards, -
Error during Goods Receipt:Check table XMCHB: Entry 'Material no.', 'Plant
Dear All,
I am trying to post Goods Receipt for a Stock Transport Order.
The error message appears as " Check table XMCHB: entry 'material no.' 'plant', '____' , 'batch no.' does not exist. (message no. M7001)
The Supplying plant stock from which Goods Issue is done, is a Normal storage location Unrestricted stock.
The receipt has to be taken into Vendor stock (Goods Receipt movement type 101 O )
Inputs will be appreciated.technically spoken.
table MCHB is the storage location segment of a batch record.
System tries to create an entry in MCHB without a storage location, which does not make sense.
Vendor stock does not go to MCHB, instead it is recorded in table MKOL.
If you do STOs then you may transfer vendor consignment stock, but you cannote issue own stock and receive into vendor consignment stock. -
QM UD Error Message: Check table XEKBN: entry 45039875220001003 does not exist.
Hello QM expert,
I encounter a error when I make a UD. (Please refer to below screenshot. )
Case 1: I did quantity post to unrestricted use, to scrap, to blocked stock, to new material, to reserves, return delivery. When I save this UD, there is a error message 'Check table XEKBN: entry 4503987522000100310100 does not exist.' (PS. 4503987522 is PO number, but I don't know what it is about 10031010.)
Case 2: I fill the same field like Case 1, but exclude to new material. It can be passed, no error message.
Case 3: I only fill one field [to new material. It can be passed, no error message.
Could you please give me some guidance? Thank you so much.
Best Regards,
Fanchao BuHi Fanchao,
Form the inspection lot number range, I believe you are using GR form Purchase Order, right? Please confirm the below points -
1. Is this a normal PO or Sub-contractor's PO? Please confirm if this issue is happening for every stock posting like Unrestricted, Scrap, Blocked...? or just for one? Can you try one by one for example, move stock form QI => Unrestricted stock only (and do not combine all types together like the attached screenshot) and suggest if that is working.
2. If this is a non-valuated material you have used (NLAG) for testing? Are you trying to post materials for previous period? Storage Location SM10 is valid?
If still this issue exist, then potentially, there is some issue with valuation variant linked to valuation area, which is normally maintained in Configuration OPK9. Paralelly, you can request your ABAP team to check FM MB_UPDATE_VALUE_ENQUEUE_TABLE, Include LMBGBU04, as suggested by the below link -
SAP ABAP Function Module MB_UPDATE_VALUE_ENQUEUE_TABLE - SAP Datasheet - The Best Run SAP Run SAPDatasheet
You can also check SAP notes below, based on the business needs:
1. 403671 - Error M7001: 'Please check table &...'
401462 - Error M7001: 'Please check table &...'
201833 - M7001: 'Please check table XEKPO: Entry & &...'
2072019 - Error M7001 raised during posting goods receipt
407265 - Transfer parameter with BAPI BAPI_GOODSMVT_CANCEL (this may be linked to your return Delivery of 1 PC...)
439945 - GR w/ freight costs for stock transport ordr w/ML currencies
521090 - FAQ: Stock transfer to stock transport order
867878 - Inconsistencies in the EKBE table because of conversions
214814 - M7001/M7361: Table T156M, entry MAA7 2
1584493 - Overdelivery check for GR blocked stock with GR-based IV
102863 - GI f.delivery f.a stock transfer w.delivery costs
2. 409529 - Price differences during goods receipt for purchase order
3. 1528009 - MAA: incorrect distribution of goods receipt quantities
4. 1569831 - MAA2: Composite SAP Note after Support Package SAPKH60504
5. 406973 - M7001: Please check table XEBEFU: Entry does not exist
6. 70577 - QA11: Error M7001 when posting qty in usage decision (OLD NOTE, May not be applicable)
7. 824322 - QAC1: Incorrect batch in material document (Old Note, may no be applicable)
Else, you can speak to MM team and/or FI team to help you better in this case, as I feel there is no much QM issues involved.
Thanks,
Arijit -
In MB1C im getting error-"Check table T004F: entry G006 does not exist"
DEAR SIR,
WHILE DOING MB1C IN MOVEMENT TYPE 561 I M GETTING THI ERROR -Check table T004F: entry G006 does not exist.
PLZ HELP ME HOW TO SOLVE THIS PROBLEM.
THXS AND REGARDS,
DEBESH TRIPATHYCheck these threads
[Check table T004f: Entry G006 Does not exist |Check table T004f: Entry G006 Does not exist]
[Posting Material |Re: Posting Material]
[Error in MBIC|Error in MBIC]
thanks
G. Lakshmipathi -
IDOC for SAP BP Message "Table BAPIADTEL entry to be changed not found in "
Hi Experts,
I have a requirement to update BP Address details using LSMW.
I am usign IDOC Message Type "BUPA_C_CHANGEADDRESS" and Basic Type "BUPA_C_CHANGEADDRESS01" for this requirement.
Using this i am able to update City, PO BOX, Postal Code, Street, region.
However, i am unable to update Tel Number, Extn, Fax Number and Extension.
I have added Structures E1BPADTELX & E1BPADFAXX and "X" to Update them.
When i run LSMW, it updates all except Tel, Fax and their extension.
I get Status 53 message "Table BAPIADTEL entry to be changed not found in target system". I have requirement to change those numbers.
Can someone please tel me how to update those 4 fields ?
ALso how and where this Data are stored in tables?
Under BP Tcode, Under General Tab, it says "Address Independent Communication.
Please help.
TnRHello experts, hello to all,
I'm facing with the same task. I have a requirement to update BP postal code using the LSMW.
Identical to Pintoo D I am usign the IDOC Message Type "BUPA_C_CHANGEADDRESS" and the Basic Type "BUPA_C_CHANGEADDRESS01". In the section Field Mapping... I have mapped the Business Partner ID (BUSINESSPARTNER) and the City postal code (POSTL_COD1). In order to update the postal code I set in the Tree-Structure E1BPBUS1006_ADDRESS_X the Field POSTL_COD1 with a constant (= X).
When I try to process the IDoc I get the Error 51:
Data set BUT020 for BP 0000403643 maintained time-dependently,despite inact.time dep.
Additonal I checked the recommenden OSS Note 810634 and the Customizing but everything is OK. Did I mistake during the confuguration of the LSMw project? I cannot find a documentation regarding the IDoc Msg.Type BUPA_C_CHANGEADDRESS.
Kind regards
Ioannis Moutogiorgos
Maybe you are looking for
-
How can I select all stamps in a PDF file without having to click on each individual one?
I use the stamps and text box feature to mark up engineering drawings in abobe acrobat 10. Sometimes revisions come for already worked on drawings so I need to transfer my work over. Usually I just hold control and click each stamp and text box then
-
EMERGENCY! All site content disappearing when publishing to HTML
When publishing to HTML, ALL content on the site (inclusive of header nav and footer content) is disappearing. Only the browswer image is visable. http://www.brainstormsuccess.com I quite Muse. Dumped cache. Rebooted. Have tried creating new layers a
-
How to serve a user text in a diffrent encoding
Hi , i have a problem i can't figure out how to solve , i have a site that is UTF-8 based but deals with clients that have different encoding on their site . part of the functionality of my site is in some cases to generate a string that will eventua
-
Alternative to ADSL nation modem
Until recently I was happily using an ADSL Nation modem with my Airpot Extreme, but I have changed ISP (TalkTalk to O2, UK) and the modem is not compatible with O2. Does anyone have any reccomendations for an alternative? I'm looking for something fa
-
The Text tool just draws a flat line. Is there a setting that I may have accidentally changed? I have worked on this for many hours and have given up so thought maybe someone on the forum could help me. Thank-you.