Table s804 not active in dictionay

Hello,
Please help me: what can I do if I get the message "table s804 not active in dictionary"? Thank you!
Regards,
Ileana

Hello Ileana,
I've never seen "???" in an information structure (IS), or in the corresponding database table. Where do you get it? In SE11 for the database table, or in MC23 for the IS?
The IS are based on so called communication structures (e.g. MCIPM and MCIQF for the Plant maintenance information structures). Have you enhanced the communication structures for your application? If so, perhaps you have transported the IS and the field catalogues, but not the enhancement of this communication structures?
The (IS) is a self defined inforstructure. Correct?
For which type of application have you defined it (you can find it in transaction MC23, when you display the IS).
Where do you get the error message?
Only some questions to locate the error.
Best regards
Stephan

Similar Messages

Table BSEG not active and am failing to activate it

Hi experts
I am failing to activate standard table BSEG and its giving me a short dump referring to temp tample QCMBSEG.

hi
if you are in SPDD phase of Upgrade and you are not able to activate the table then just check in table any customize field are added or any kind of customization has done or not, if yes then make sure those field should exist in Higher version also.
and after that just dicuss with your Bassis team there is one phase called ACT_700 where they can do the mass activation of all Dictionary objects.
Hope this will help.

TABL ZCOEP_TEST2 was not activated

Hi Experts,
I am getting an error as "TABL ZCOEP_TEST2 was not activated ".
the log is
Activation of worklist (GIRAN1 / 06/28/2011 / 05:40:03 /)
============================================================
   See log GIRAN120110628054002:ACT
TABL ZCOEP_TEST2 was not activated
============================================================
End of activation of worklist
============================================================
its not displaying any error message.
I don't understand why this error is coming for activation.
Please help.
Thanks in advance for your support..

Hi,
the table is not activated check the domain and data element also. check out if it is a structure. or check the technical settings is maintained for that table?
otherwise
goto t.code se14
give the table name and activate it.
Regards,
Dhina..

Data exists in DSO New table but not in Active table

Guys,
I am loading data from one DSO to another DSO, in my target DSO I have 6 fields which 2 of them are mapped in Transformation and remaining 4 will be populated by Start routine and End routines. Before Activating I am seeing all 6 fields got populated in New data table but after activating I am only seeing the 2 fields in Active data table but not those that are populated through Start and End rouitnes.
I have only one Key in my DSO, am I missing something here?please let me know.
Thanks,
KK

Hi,
beside end routine, there will be one icon.
click on that.
you will see two options.
select the option "populate values into fields with out active transformation rules"
don't remember the words correctly but gives the same meaning...
Activate the transformation.
this will solve your problem
Regards,
Raghu
Edited by: Raghu tej harish reddy on May 2, 2009 11:10 PM

"The Dictionary structure or table "*C865" is either not active or does"

Hello experts,
I have a transaction - VKOA. I get the following error on executing this t-code. The program used by this t code is SAPL089C.
The error is
Runtime errors         SYNTAX_ERROR
Occurred on     11/23/2009 at   05:12:58
Syntax error in program "SAPL089C ".
What happened?
The following syntax error occurred in the program SAPL089C :
"The Dictionary structure or table "*C865" is either not active or does not exist."
Error in ABAP application program.
The current ABAP program "SAPLSVIM" had to be terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
Error analysis
The following syntax error was found in the program SAPL089C :
The Dictionary structure or table *C865 is either not active or does not exist.
Please suggest a suitable solution to this problem...
Many Thanks in adv.
Kunal
Edited by: kunal kotak on Nov 23, 2009 6:53 PM

Hi ,
I will try the solution propesed by Max.
In the meantime, I would like to confirm if there is something related to SAP Note # SAP Note 72121. Refer the following details from the note.
Symptom
When you maintain account determination (FI or SD), you get the error
message:
The DDIC structure or table "*C400" is not active or does not exist.
OR
The system writes a dump with DBIF_NTAB_TABLE_NOT_FOUND, C400 was not
found.
C401 can also appear instead of C400.
Additional key words
Tables C400, C401.
Program: SAPL089C, L089CT00
Transaction: VKOA
Solution as per the note
1. Execute the program RV12A002. On the selection screen, enter Usage C,
Tables 400 to 401.
WARNING: Make sure that you only delete C400 and C401!
Execute the program.
2. Execute program RV12A001. On the selection screen, enter Usage C and
mark 'Reports & Screens'.
Can there be sometihing similar to this for C865 table as well. Just a thought.

Urgent.. generic data source... table not activated.....

Dear all experts,
i am extracting generic data source
while doing it, it is saying as the table which i have selected in the screen SE11 has not activated
can anybody please tell solution...
its very urgent.
points will be assigned to your help.....
regards
vinay

Dear Kalpana M ,
can you please tell, how to activate tables..
i m using makt and mara.... and i have created view on them.
how to activate these tables.
plz reply, its very urgent.
regards
Vinay

Table not active in Dictionary

Hi All,
I have a simple question here ... when I run t.code SE16 -
> type in table RSSELDTP -
> receive a message "Table RSSELDTP is not active in Dictionary" . What is the cause of it ... how do I go about it.
Thanks
Nathan

Have you clearly read the notes, see the below line;
From notes 1149558
Solution
Caution:
Before you implement the advance corrections, you must call transaction SE11 and create the table RSSELDTP in the package RSSM with the storage parameters data type = APPL0 and size category = 8 with the following fields:
FieldKeyInitial valuesData element
RNR X X RSREQUID
SELOPT X CHAR128
The table should be created in the delivery class "L".
"The table for storing temporary data is delivered empty"
So you must create that table as shown in the notes before making the corrections given in the notes.
Regards
Karthik D

Sintax error in COPA- Table T2580 does not exist or is not active

hi to all
i am doing configuration for T.C KES1 in CO-PA
while doing this i am getting SINTAX ERROR saying that T2580 DOES NOT EXIST OR IS NOT ACTIVE.
I checked with standard program this table is used by standard SAP PROGRAM
programe name SAPL0KEA
but this table contain no data
could please some help on this
v v urgent

Hi Hari,
This is a know issue in CO-PA. You need to apply three notes and the issue will be resolved.
Please run report RKEAGENV as described in the attached 64490.
If running report RKEAGENV will cause another error concerning operating concern E_B1 please copy the report ZJBREOFC from the correction in-
structions in the attached note 872175, activate and execute it.
If after applying note 872175 you receive a new short dump, please
execute report RKEAGENF to eliminate the error so that the program
RKEAGENV could then be executed without error and thus the characteris-
tic maintenance should work again.
Please also implement note 942785 into your system.
Regards,
Abhisek.

The table RSPFL_FDIR is not active in the dictionary

Hi Everyone,
When I am trying to edit the table RSPFL_FDIR, It is giving the Error message as The table RSPFL_FDIR is not active in the dictionary". Can somebody tell me how to activate this table.
Thanks.

Hello,
Contact your basis team. Or do it yourself, just go to trx. se11 or se14 and activate the table.
Regards,
Jorge Diogo

Table VBRP and VBAP could not actived

My system is SAP ERP IDES ECC 6.0 SR2. After importing the support package SAP_APPL from 006 to the newest 016, when I try to user VA03 , the system raise a dump, after check the error information, I found it caused by Table VBAP and VBRP not actived correctly.
Check log:
Check table VBRP (WOODY/09.09.06/22:56)
Enhancement category 3 possible, but include or subty. not yet classified
Field name J_1BTAXLW4 can be provided in this system. Please do not use.
Field name J_1BTAXLW5 can be provided in this system. Please do not use.
VBRP: Structure change at field level (DB is adjusted)
Check on table VBRP resulted in errors
Check table VBAP (WOODY/09.09.06/22:57)
Append structure ZZDEAVBAP appended to table VBAP
Enhancement category 3 possible, but include or subty. not yet classified
Field name J_1BTAXLW4 can be provided in this system. Please do not use.
Field name J_1BTAXLW5 can be provided in this system. Please do not use.
VBAP: Structure change at field level (DB is adjusted)
Check on table VBAP resulted in errors
Activation log:
VBAP:
=========================================================================
Activation of worklist (WOODY / 2009.09.06 / 23:05:56 /)
=========================================================================
Technical log for mass activation
See log WOODY20090906230546:ACT
TABL VBAP was not activated
Check table VBAP (WOODY/09.09.06/23:05)
Append structure ZZDEAVBAP appended to table VBAP
Enhancement category 3 possible, but include or subty. not yet classified
Field name J_1BTAXLW4 can be provided in this system. Please do not use.
Field name J_1BTAXLW5 can be provided in this system. Please do not use.
VBAP: Structure change at field level (DB is adjusted)
Check on table VBAP resulted in errors
=========================================================================
End of activation of worklist
=========================================================================
Can somebody help me to resolve this problem? Many thanks!

VBRP Activation log:
=========================================================================
Activation of worklist (WOODY / 2009.09.06 / 23:07:40 /)
=========================================================================
Technical log for mass activation
See log WOODY20090906230740:ACT
TABL VBRP was not activated
Check table VBRP (WOODY/09.09.06/23:07)
Enhancement category 3 possible, but include or subty. not yet classified
Field name J_1BTAXLW4 can be provided in this system. Please do not use.
Field name J_1BTAXLW5 can be provided in this system. Please do not use.
VBRP: Structure change at field level (DB is adjusted)
Check on table VBRP resulted in errors
=========================================================================
End of activation of worklist
=========================================================================

SAPK-81705INDMISBSC-Table 'SMW3_BDOC2' iseither not active.

Hi Gurus,
While applying (component :DMIS_BSC_2008_1_700) patch SAPK-81705INDMISBSC Its giving below error.
>>>>>
Program CNV_TDMS_CRM_DETERMINE_BO, Include CNV_TDMS_CRM_DETERMINE_BO_F01: Syntax error in line 000090
The Dictionary structure or table 'SMW3_BDOC2' iseither not active or does not exist.
>>>>>
Checked the table using Se11,SM30 it does not exist in the system.I can create the table but since its standard table have to rethink before creating .
We had applied the same patch in quality system it was completed sucessfully,Though the table does not exist in quality as well.
anybody has any idea please let me know.
Thanks&Regards
Praveen

In Rtf Template ,table is not fit with window after hide columns

Hi,
In my RTF template i have table with 5 columns in that 3 colums will display based on condition. During runtime it showing correctly with 5 columns i.e fit to window.
suppose if any of column is not displayed(hide) and table is shrinking and not fit with window.
Tried with following option in word doc:
Right click on table and select Auto Fit--> Auto fit to window. but didn't work. Please let me know is any options to make table to fit with window.
Thanks..
Edited by: user9530489 on May 3, 2011 1:09 PM

Hi,
I've changed the output device in order to test with the LP01 printer.
This device is not active in SPAD but if i setup my action with this device I can preview the smartform. It is not possible to preview the smartform with the printer that I'd like to use.
Any ideas?
Thanks in advance,
Stephanie

Table does not exist odbc -2004

Hi,
I'm updating a UDO in SBO 9. PL11 by GeneralService via DI API
The code worked without problems, but I activated the option LOG from customizing options and get the following error:
"Table does not exist odbc -2004 "
sCmp = AccCommon.Main.Company.GetCompanyService
            oGeneralService = sCmp.GetGeneralService(LocalConstants.UDO_Colegiados)
            oGeneralParams = oGeneralService.GetDataInterface(SAPbobsCOM.GeneralServiceDataInterfaces.gsGeneralDataParams)
            oGeneralData = oGeneralService.GetDataInterface(SAPbobsCOM.GeneralServiceDataInterfaces.gsGeneralData)
            oGeneralParams.SetProperty(LocalConstants.CAB_Colegiados.cCode, sNumCol)
            oGeneralData = oGeneralService.GetByParams(oGeneralParams)
            oGeneralData.SetProperty(LocalConstants.CAB_Colegiados.cEstado, LocalConstants.Colegiados.Keys_Estado.cInactivo)
            oGeneralService.Update(oGeneralData)
Any Idea?
Thanks!

Thanks,
We delete the UDO and returned to generate. We assume that there were changes in the structure that was not reflected.
Without changing the code works
Regards

How to create a table with strings active by boolean button

Good morning.
I have a problem to create a table and did not find any topic in the forum who could help me solve this problem.
I need to create an alarm table.
That is, every time an alarm was activated (boolean button), the table will show the time,date and where that alarm occurred.
For example, when the garage alarm is activated, it will to table:
Date // Time // Garage // Presence ON
And so on, when the alarm is activated the room:
Date // Time // Room // Presence ON
If anyone can help, I'd appreciate it enough.
Thank you.
Solved!
Go to Solution.

Giuliano06 wrote:
So I can show the alarm, but when the button is not selected, it is sending null value (blank string) for the table through the shift register.
Also, when I select for example the 2 bedroom, he is moved to another column in the table and not just below the last alarm obtained.
My VI is attached case someone might have an idea.
your constantly polling the value to your table, ofcoarse this vi is designed according to the mechanical action of the boolean switch...
Attachments:
Sensors table.vi ‏10 KB

While creating SAP ISU Device category i got one error message like The material 5 does not exist or is not activated Message no. M3305

while creating SAP ISU Device category EG01 .i got one error message like The material 5 does not exist or is not activated Message no. M3305

I don't know EG01 transaction, but if SAP says "material 5 does not exist " then SAP is usually right.
Can you give an evidence that material 5 exists? e.g. screenshot from SE16 at table MARA, MARC and MAST

Table s804 not active in dictionay

Similar Messages

Maybe you are looking for