Table set to Autofit to Contents doesn't display correctly in RH10

Upgraded from RH9 to RH10 and all my tables are set to Autofit to Contents. After upgrading, the first column of every table is huge/wide, therefore, it's very difficult to work with the remaining columns because they're so condensed. I've been waiting for an answer to this issue for over 2 months from RH support so thought I'd see if anyone else is experiencing the same problem and if so, if they found a resolution.

I am seeing the same in a new table created from one of the default tables that ships with RoboHelp. Looks like a bug.
If you use Fit to Window, it works. The choice is to live with the bug or switch to another option.
You should report the bug.
http://www.Adobe.com/cfusion/mmform/index.cfm?name=wishform&product=38
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Similar Messages

WRT54G version 6 - router setup screen via Internet Explorer 7 doesn't display correctly

Hi,
I've just set up my WRT54G router. I'm able to connect to the internet and I'm able to connect directly to the router via IE but the setup screen doesn't display correctly. I've tried resetting the computer and updating the firmware but it still doesn't display correctly. Almost all of the text is missing except for the Linksys logo and a few drop down menus. Any help/suggestions would be great, thanks.

Hi gang,
There a number of things that you can do to solve this problem but most of them involve changing the rules that you have already configured in your ZoneAlarm profile. My preferred solution is to:
-unplug your router from the WAN (why not?)
-turn off zone alarm
-access your router's administration page at http://192.168.1.1
-find the admin page where you can switch admin access from http to https
--- **save your changes !!**
-reboot your router
-plug the WAN cable back into your router
-turn ZoneAlarm back on
-access your admin page at https://192.168.1.1 ( note the 's')
Bob is your sister's brother! Your admin page should work as it is supposed to. Your router and ZoneAlarm should be playing nicely together. You haven't borked your finely tuned zonealarm rules. You were going to bookmark your admin page anyway, and if you want to allow remote administration, you would want to use https anyway. Nothing is broken and you fixed two things. "Its a good thing."Message Edited by ubuibi on 12-27-200609:10 AM
There are really only 10 kinds of people in the world;
Those who understand binary and those who don't.
ubuibi

Vim doesn't display correctly utf8 characters

Hi,
I don't use an utf8 locale, but some files (like latex sources of my reports) are in utf8 for compatibility with other pcs. Since a while, but i cannot recall exactly when (normally, I don't use vi for latex), it doesn't display correctly such files. Emacs does, kate does, but not vim. I tried to set encoding and file-encoding in vim, but it didn't fix the issue. Any clue? Is vim broken?
Related question. It is safe to switch to utf8 locale (I mean, in rc.conf) months after the installation?
domanov

lang2 wrote::set enc=utf8
It didn't work (as i said in my previous post).
I changed from it_IT@EURO to it_IT.UTF8 in rc.conf, restarted and now vim is fine (the corresponding line in locale.gen was already uncommented and I rerun locale-gen just to be sure). Now man pages are really ugly, even worse if I erase the option -Tlatin1 from NROF line in man.conf (as suggested in the man.conf manual). Ok, let's deal with that, now.
Do I risk to broke anything more important? Shall i convert to utf-8 all the text files in /home, /etc and so on??

[SOLVED] urxvt doesn't display correctly some special characters

Hello everyone,
I have a weird issue with urxvt. For some reason it doesn't display correctly some special character.
Here is a comparison between xfce4-terminal and rxvt-unicode (I used theses characters as exemple):
xfce4-terminal :
urxvt :
And here is my .XDefaults file (without the color and the plugin part, since it's unrelevant):
!Font
URxvt.font: xft:PragmataPro:pixelsize=11:antialias=false
!General
URxvt.scrollBar: false
URxvt*imLocale: fr_CH.UTF-8
URxvt.saveLines: 5000
URxvt.geometry: 95x26+50+50
Has someone an idea what the problem could be?
Thank's in advance.
Last edited by mwm (2013-11-13 13:15:48)

This is what I think is happpening.
PragmataPro may not contain those glyphs. It appears to have a wide array of glyphs but it is not unicode complete.
Xfce-terminal is a vte terminal. When a glyph cannot be found in the desired font, it will find the glyph in the 'closest' font. Urxvt will only use the glyphs in the font or fonts specified. If PragmataPro does not contain the glyphs, urxvt will display boxes.
You can give urxvt a series of fonts to search. It will search for a glyph through the listed fonts in the order you specify. Here's an example from my urxvt configs:
urxvt*font: xft:DejaVu Sans Mono:style=Book:antialias=false:size=8, \
xft:WenQuanYi Bitmap Song:size=8, \
xft:FreeSerif:style=Regular, \
xft:unifont:style=Medium:antialias=false
I couldn't use FreeSerif or unifont as a main font, but for an occasional glyph, it works for me. This file, http://www.cl.cam.ac.uk/~mgk25/ucs/exam … 8-demo.txt, can be displayed in urxvt correctly, with only a few unknow glyphs showing as boxes in the Amharic section.

Youtube doesn't display correctly since I installed latest version of firefox

youtube doesn't display correctly anymore...adobe flash has been updated and java is enabled. This is what it looks like now...
"Loading...
Videos
Music
Shows
Trailers
Live
All Categories
Categories "

Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Flash content doesn't display in browsers

I recently updated Dreamweaver to 8.0.2. I updated an .swf
file, updated the link on my DreamWeaver page and uploaded
everything. When I saved the DreamWeaver page a window popped up
that said it was modifying the html to work with the updated
Internet Explorer. The new .swf file doesn't display on any browers
(Safari, FireFox, IE)
Does anyone know what's going on?

Did you upload the Scripts folder that DW places into your
local site when
you do this?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"dlipscombe" <[email protected]> wrote in
message
news:ecv25g$i9v$[email protected]..
>I recently updated Dreamweaver to 8.0.2. I updated an
.swf file, updated
>the
> link on my DreamWeaver page and uploaded everything.
When I saved the
> DreamWeaver page a window popped up that said it was
modifying the html to
> work
> with the updated Internet Explorer. The new .swf file
doesn't display on
> any
> browers (Safari, FireFox, IE)
> Does anyone know what's going on?
>

Yahoo home page doesn't display correctly. All my other sites are OK. Page style is set to "Basic Page Style. What else can be wrong?"

Yahoo home page does not display properly, while all my other web pages do display correctly. I checked View, Page Style, and it is set to Basic Page Style. What else can be wrong?

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
* Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
* Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

Website doesn't display correctly, some areas cut off

All pages of my website cut off some text at the top and bottom. This does not happen with any other web pages I browse! The site was created by our developer and based on a Themeforest theme (from Envato) called Franklin Crowdfunding. Interestingly, my wife's computer does not have this problem and also uses Firefox. So I compared add-ons, extensions, etc. with hers and disabled those on my machine only. Also reinstalled latest Java, Firefox, started in Safe Mode, disabled acceleration and everything else I could find in the troubleshooting section. Nothing has worked. BTW site displays correctly on ipad as well.
I did notice that the first time I navigated to the page after reinstalling Firefox it worked fine. But after closing and restarting Firefox the problem reappeared.
Website is www.accoladesintl.com ...red copy at top is partially cut off (bottom half, not top half) and bottom half of the contact info at bottom.
This problem does not happen in IE. I would rather use your product than it or google, so please help me find the problem!

You can reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
*Hold down the Shift key and left-click the Reload button
*Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
*Press "Command + Shift + R" (Mac)
Clear the cache and cookies only from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > Cookies: "Show Cookies"
You can remove all data stored in Firefox from a specific domain via "Forget About This Site" in the right-click context menu of an history entry ("History > Show All History" or "View > Sidebar > History") or via the about:permissions page.
Using "Forget About This Site" will remove all data stored in Firefox from that domain like bookmarks, cookies, passwords, cache, history, and exceptions, so be cautious and if you have a password or other data from that domain that you do not want to lose then make sure to backup this data or make a note.
You can't recover from this 'forget' unless you have a backup of the involved files.
It doesn't have any lasting effect, so if you revisit such a 'forgotten' website then data from that website will be saved once again.

Design View Doesn't Display Correctly

I am new to this forum so hope I do things correctly!
I have Vista and am using Dreamweaver 8 to produce 4 of my
websites, but I am having trouble on my www.victorian-cards.com
site. All the files where I have the problem validate without
errors and display correctly in both IE and FF. I have nine files
with this problem. One of the problem pages is
http://www.victorian-cards.com/funny-cards2.htm
When I look at these nine files in the Design View, all I can
see are the correct picture at the top, the top and bottom
navigation, Google Search, and the footer. Where the body is I see
horizontal lines and </td>. The </td> is highlighted in
yellow. I thought perhaps I had a coding error, but it validates
without any errors.
Help! I sure would appreciate some words of wisdom. I can
work in the code, but I like to check the design view before I
upload my files.
I have read that a lot of people are having this problem. I
did try changing the magnification, but this did not help.
Jeanne
Victorian Cards

> Thanks for the quick reply. I tried this, but nothing
changed. Any other
> ideas?
>
> Jeanne
the page has html syntax errors- having to do with tr and td
tags.
Look at the code view in dw- see the yellow highlights??
It's probably just one error, find that one out and most of
the others will
be gone. There's too much stuff on the page for me to
sight-read the code
and find the error.
suggestion? Make a copy of the page, then start deleting
content so the
problem syntax error is more obvious. Delete working complete
tables to
isolate the problem one
Alan
Adobe Community Expert, dreamweaver
http://www.adobe.com/communities/experts/

32bpp application doesn`t display correctly or crashes when we remote via SCCM 2007 remotetool

By default remotetool’s Color Depth is set to 16 bpp
Daniel
Synapse application is a PACS viewer used by radiology department in our hospital.
Synapse is designed to run in 32 bpp, therefore when we remote to it, the picture is not dispayed.
Instead it displays an error Your display is configured for 65536 colors. This mode is unsupported. Use 24 or 32 colour mode.
As soon as we disconnect or end the remote session. The picture on users workstation
turns black. Synapse needs to be re-launched in order to display properly again.
Is there a way to set the Color Depth default on remotetool to 24bbp ?
When we close the remote session, Synapse crashes or doesn’t display any pictures, leaving them black.
Here’s how the user would see it
On the other hand if we pre-set the colour depth to 24bbp before opening Synapse. Everything is displayed correctly on both admin and the remote workstation, while in a remote session.

Yes, I know this is an old post, but I’m trying to clean them up.
To my knowledge there is no way to do this, however I would suggest looking at remote desktop instead of CM0-7 Remote control.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

Custom ErrorDocument doesn't display correctly

I have created a custom ErrorDocument 401 to use in
.htaccess. After the user cancels out of the login screen in
Firefox or Opera, they are redirected to the authreqd.html file for
the custom error message. However, when that page is diplayed in
Firefox or Opera, none of the background images load. The Alt text,
when available, is shown instead. Why would the images not load for
this file when they work correctly for all other links.
Interestingly, when you type in the URL and go directly to that
page, it does display correctly.
P.S. Safari doesn't load the custom error page at all. An
incorrect username/password returns the login screen repeatedly,
and cancelling returns you to the page you were previously on.
Here is the custom error
file

There are tonnes of possibilities and many websites with suggestions. I tried all sorts of these option (clear cache, clear cookies, anti-virus changes, page style options etc) with no success until eventually I accidentally changed my character encoding autodetect (firefox 6) from "off" to "universal" and everything is fine.

Local Calculation (Summation) in query doesn't display correctly in web

Hi All,
I have been working on a complicated query where I have formulas that perform calculations. I then Hide these formulas and use them in another formula for further calculations. The new calculations I then use local summation to basically just add the columns values and come up with an overall result. Works perfect and is displayed perfectly.
Problem is now in the web. Either using a Pie Chart or just simply an Analysis item, the values are not displayed correctly at all. The Pie Chart only displays the first row of data (not the overall result...which is a local summation...which is what I would prefer) and suprised that the Analysis item doesn't basically display what the query does. I'm guessing it has to do with this local calculation.
Can someone explain this behavior?
Thanks.

Anyone any ideas?

Data Link Properties wizard doesn't display correctly.

Hi, This is Dai.
I'm using Oracle DB.
When I try to create configuration of Identity Center and to config DB connection, Data Link Properties wizard doesn't display required DB provider.
The document of "SAP NetWeaver Identity Management Identity Center Getting Started" discribes that I should choose "Oracle Provider for OLE DB", however, I can't see it in the providers list.
The list of DB provider is below.
Microsoft Jet 4.0 OLE DB Provider
Microsoft OLE DB Provider for Indexing Service
Microsoft OLE DB Provider for ODBC Drivers
Microsoft OLE DB Provider for Oracle
Microsoft OLE DB Provider for SQL Server
Microsoft OLE DB Simple Provider
MSDataShape
OLE DB Provider for Microsoft Directory Service
And I want to select "Oracle Provider for OLE DB". Are there any settings or configs before this configuration? If you have some information, please help me.
Best Regards,
Daisuke Ikari

Thank you, I installed 32 bit client. And it's working now
But now after IC initial configuration there is one more error which says-
"this identity center database is not migrated to 7.2" And when i refresh the node it also says -
"this version of identity center requires that database update 1035 is installed. the latest update installed is 1025"
I have also attached the screenshot for the same below, I also ran update-mxmc.cmd to update DB.But still same error.
please help,
Indira

Basic Setup Page doesn't display correctly.

I logged into my WRT54G router today to change some settings around but the page doesn't display any of the writing or links at the top of the page. I've tried reloading the page and resetting the router but neither of these worked.

Also when I click the "save changes" button nothing happens. When I opened the page in IE it gave me the Error on Page thing and I clicked it to see the errors. I had 52 errors total with the reason Object Expected for each one.

Firefox Doesn't display correctly and is very laggy on sites with CloudFlare DDoS Protection

Since 35.0 and above i have been getting weird behaviour on sites with CloudFlare DDoS protection.
When i open the site in a new window, it takes a really long time and sometimes doesn't display at all and gives me a blank page. and now it just starts to say "New Tab" and i can't hit refresh.
When the site actually loads after 20 something attempts, the site is laggy, any action takes upwards of 20 seconds.
Whenever i try to open something, i get a blank page with the URL at tabs. Whenever i try to like or post anything, it delays by 15-20 seconds.
Site i am trying to use with much failure. http://hypixel.net/
Anyone else having this issue?

''Gnospen [[#answer-693501|said]]''
<blockquote>
maybe it would help if you open "troubleshooting information" (under help)
and copy it to clipboard and paste it here
</blockquote>
"application": {
"name": "Firefox",
"version": "35.0.1",
"userAgent": "Mozilla/5.0 (Windows NT 6.1; WOW64; rv:35.0) Gecko/20100101 Firefox/35.0",
"supportURL": "https://support.mozilla.org/1/firefox/35.0.1/WINNT/en-US/",
"numTotalWindows": 1,
"numRemoteWindows": 0
"crashes": {
"submitted": [
"id": "bp-267af71f-8bf3-46cc-883e-ff65e2150222",
"date": 1424594056152,
"pending": false
"pending": 1
"modifiedPreferences": {
"accessibility.typeaheadfind.flashBar": 0,
"browser.cache.disk.smart_size.first_run": false,
"browser.cache.disk.smart_size.use_old_max": false,
"browser.cache.disk.capacity": 358400,
"browser.cache.disk.smart_size_cached_value": 358400,
"browser.cache.frecency_experiment": 4,
"browser.fixup.domainwhitelist.googler": true,
"browser.fixup.domainwhitelist.google": true,
"browser.fixup.domainwhitelist.gmail": true,
"browser.fixup.domainwhitelist.totaldramawiki": true,
"browser.fixup.domainwhitelist.omegle": true,
"browser.newtab.url": "http://mystart.incredibar.com/?a=6PRnKQcHXQ&i=26&did=10963&loc=skw",
"browser.places.smartBookmarksVersion": 7,
"browser.sessionstore.upgradeBackup.latestBuildID": "20150122214805",
"browser.sessionstore.max_resumed_crashes": 100,
"browser.sessionstore.enabled": true,
"browser.startup.homepage_override.mstone": "35.0.1",
"browser.startup.homepage": "http://mystart.incredibar.com/?a=6PRnKQcHXQ&i=26&did=10963&loc=skw|http://www.youtube.com/",
"browser.startup.homepage_override.buildID": "20150122214805",
"dom.max_chrome_script_run_time": 0,
"dom.mozApps.used": true,
"extensions.lastAppVersion": "35.0.1",
"font.internaluseonly.changed": true,
"gfx.direct3d.last_used_feature_level_idx": 0,
"keyword.URL": "http://mystart.incredibar.com/?a=6PRnKQcHXQ&i=26&did=10963&loc=skw&search=",
"media.gmp-gmpopenh264.lastUpdate": 1423171183,
"media.gmp-gmpopenh264.version": "1.3",
"media.gmp-manager.lastCheck": 1424516177,
"network.cookie.prefsMigrated": true,
"places.database.lastMaintenance": 1424565640,
"places.history.expiration.transient_current_max_pages": 104858,
"plugin.disable_full_page_plugin_for_types": "application/pdf",
"plugin.state.nppdf": 2,
"plugin.importedState": true,
"privacy.sanitize.timeSpan": 0,
"privacy.cpd.cookies": false,
"privacy.sanitize.migrateFx3Prefs": true,
"privacy.cpd.sessions": false,
"storage.vacuum.last.places.sqlite": 1424326926,
"storage.vacuum.last.index": 1
"lockedPreferences": {},
"graphics": {
"numTotalWindows": 1,
"numAcceleratedWindows": 1,
"windowLayerManagerType": "Direct3D 11",
"windowLayerManagerRemote": true,
"adapterDescription": "Intel(R) HD Graphics 4000",
"adapterVendorID": "0x8086",
"adapterDeviceID": "0x0166",
"adapterSubsysID": "00000000",
"adapterRAM": "Unknown",
"adapterDrivers": "igdumd64 igd10umd64 igd10umd64 igdumd32 igd10umd32 igd10umd32",
"driverVersion": "8.15.10.2712",
"driverDate": "3-26-2012",
"adapterDescription2": "",
"adapterVendorID2": "",
"adapterDeviceID2": "",
"adapterSubsysID2": "",
"adapterRAM2": "",
"adapterDrivers2": "",
"driverVersion2": "",
"driverDate2": "",
"isGPU2Active": false,
"direct2DEnabled": true,
"directWriteEnabled": true,
"directWriteVersion": "6.2.9200.16571",
"webglRenderer": "Google Inc. -- ANGLE (Intel(R) HD Graphics 4000 Direct3D9Ex vs_3_0 ps_3_0)",
"info": {
"AzureCanvasBackend": "direct2d",
"AzureSkiaAccelerated": 0,
"AzureFallbackCanvasBackend": "cairo",
"AzureContentBackend": "direct2d"
"javaScript": {
"incrementalGCEnabled": true
"accessibility": {
"isActive": false,
"forceDisabled": 0
"libraryVersions": {
"NSPR": {
"minVersion": "4.10.7",
"version": "4.10.7"
"NSS": {
"minVersion": "3.17.2 Basic ECC",
"version": "3.17.2 Basic ECC"
"NSSUTIL": {
"minVersion": "3.17.2",
"version": "3.17.2"
"NSSSSL": {
"minVersion": "3.17.2 Basic ECC",
"version": "3.17.2 Basic ECC"
"NSSSMIME": {
"minVersion": "3.17.2 Basic ECC",
"version": "3.17.2 Basic ECC"
"userJS": {
"exists": true
"extensions": [
"name": "Adblock Plus",
"version": "2.6.7",
"isActive": false,
"id": "{d10d0bf8-f5b5-c8b4-a8b2-2b9879e08c5d}"
"name": "FastFreeConverter",
"version": "5.6",
"isActive": false,
"id": "extension@Fast_Free_Converter.com"
"name": "Mozilla hotfix",
"version": "2.0",
"isActive": false,
"id": "[email protected]"
"name": "Updater By SweetPacks",
"version": "2.0.0.609",
"isActive": false,
"id": "{8E9E3331-D360-4f87-8803-52DE43566502}"
"experiments": []
}

Table set to Autofit to Contents doesn't display correctly in RH10

Similar Messages

Maybe you are looking for