Table T522T, for Language AR-Arabic No Entries

Dear Team:
Employees belonging to country grouping 10 and having Language as AR Arabic in Infotype 0002 is facing this problem.
For Language AR - Arabic, the form-of-text has not been defined in table T522T. When we change any field in infotype 0002 and save the record, getting a dump error stating as
What happened?
The exception 'CX_HRPA_INVALID_CUSTOMIZATION' was raised, but it was not caught
anywhere along
the call hierarchy.
Since exceptions represent error situations and this error was not
adequately responded to, the running ABAP program
'CL_HRPA_INFOTYPE_0002=========CP' has to be
terminated.
==========================================================================
AND as Language is AR - Arabic, when we try to change to EN - English, giving a Data Inconsistency error "Data record xxxxxx has grouping value "instead of "10".
When we have checked with program RPUFIXDS, it shows that No text defined in T522T for form of address key for language AR.
Now I request to clarify how to make entries in the table T522T with Language specific or let me know who can we avoid the same.
Regards
Team Member.

Hi Experts,
Could you please let me know how to maintain entry in table T522T? It can not be accessed via SM30.
I went to the following path in SPRO.
Pers. Mgmt. -> Pers. Adm. -> Personal data -> Create forms of address.
Create forms of address is concerned with table T522G.
But I need to maintain entry in T522T.
Please help me out with this.
Many Thanks.
Best Regards,
Jyoti

Similar Messages

Table name for language

Hi
I would like to know the table name for language

Hi Vasantha,
Languages will be stored in the transparent table T002.
Thanks and Regards,
Shilpa

Error "No entry in table T589A for P" while creating new Infotype

HI,
I've created a new infotype (9605). All the tables, structures, screens etc. have been created using transaction PM01 successfully. But upon execution of Infotype from PA30, the infotype screen is displayed with the following error:
"No entry in table T589A for P"
Any input will be highly appreciated.
Thank you,
Farooq.

Hi Farooq,
Untill and unless the the field PSYST-IOPER is cleared explicitly in the program MP960500 (in PBO modules), this error should not occur.
Also is this error is coming only for 9605 infotype ? Also is any other info availaible in the error message such as entry in table t589a is not available for which value of OPERA (INS, MOD, DEL, LIS etc) ?
Regards,
Shrinivas

Dynamic Select Query including Dynamic Tables with For all Entries

Hello everyone,
I need to create a select query which involves using of Dynamic Tables.
Suppose I have a dynamic table <d1> which consist of let say 10 records.
Now i need to make a select query putting data into another dynamic table <d2>
CONCATENATE keyfield '=' '<d1>' INTO g_condition SEPARATED BY space.
CONCATENATE g_condition '-' keyfield INTO g_condition.
SELECT * FROM (wa_all_tables-name) INTO CORRESPONDING FIELDS OF TABLE <d1>
        FOR ALL ENTRIES IN <d1>
WHERE (g_condition).
But it is giving dump.
Please help me on this....

Short text
    A condition specified at runtime has an unexpected format.
What happened?
    Error in the ABAP Application Program
    The current ABAP program "ZNG_CUSTOMWRITE" had to be terminated because it has
    come across a statement that unfortunately cannot be executed.
Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_DYNAMIC_OSQL_SEMANTICS', was
     not caught in
    procedure "WRITE_ARCHIVE_PROD" "(FORM)", nor was it propagated by a RAISING
     clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    The current ABAP program has tried to execute an Open SQL statement
    which contains a WHERE, ON or HAVING condition with a dynamic part.
    The part of the WHERE, ON or HAVING condition specified at runtime in
    a field or an internal table, contains the invalid value "ZCOURIER-ZCOURIERID".
CONCATENATE keyfield '=' g_header INTO g_condition SEPARATED BY space.
CONCATENATE g_condition '-' keyfield INTO g_condition.
SELECT * FROM (wa_all_tables-name) INTO CORRESPONDING FIELDS OF TABLE <dyn_table1>
FOR ALL ENTRIES IN <dyn_table>
WHERE (g_condition).

My table of contents does not use the entry style I select for words in the paragraph that have character styles applied to them in the chapter, so some of the letters are showing up as green, which is fine in the chapter but not in the TOC.

My table of contents does not use the entry style I select for words in the paragraph that have character styles applied to them in the chapter, so some of the letters, specifically parameters, are showing up green, which is fine in the chapter but not in the TOC. I can manually fix this in the TOC by changing the character style to none after the toc has been generated, but I don't want to do this.

What application are you running? Please ask this in the forum of the product you're using.

No entry found in table SMOFQFIND for BDoc type SI_CONTRACT

Hi Gurus,
I try to do a request dowload for SI_CONTRACT object.
When execute and monitor my request objects the status is OK.
Then, I check the BDocs Message Trace and I see the following error
"No entry found in table SMOFQFIND for BDoc type SI_CONTRACT - Queue name used: CRI_SI_CONTRACT (see note 677800 for further info"
Does anyone know how to resolve this issue?
Thanks,
M@le

Hi Brian,
There was leading 0 for the contract # in the request detail, however this message is still in the BDoc message trace. The BDoc was posted successfully. I checked the table SMOFQFIND and could not find the entry for BDoc type SI_CONTRACT.
There are records for SI_CONNOBJ and SI_POD which are all delivered by SAP. I think we just need to maintain SI_CONTRACT in this table to get rid of this message. Just I do not know what exact to maintain for SI_CONTRACT.
Could you help to check standard SAP environment to see what is the detail for SI_CONTRACT in table SMOFQFIND?
Thanks,
ZJKong

Cound not find any entry in table EDP12 for a partner provided in IDOC data

Hi All,
I have an inbound IDOC for a purchase order.
If a put a query to the table EDP12 for the partner or message type (ORDERS) provided in the IDOC data, I do not get any entry for this.
Could you please enlighten me on this...
Thanks,
Sanjeet

Hi Gautham,
Even if I go to T-Code SE11 or SE12 in production or quality system and try to see the contents of this view, one message pops up saying "You do not have authorization for T-code SM30".
And in DEV system, I get a message saying "No database view exists for view VEDI_TDP21".
Anyway my current question is : In T-code WE42, there are two process codes for message type ORDERS:
1. ORDE (ORDERS Create sales order)
2. ORDE_BY_WORKFLOW (ORDERS Sales Order withtext in workflow)
How can I confirm one process code out of the above two for the message type ORDERS?
Regards,
Sanjeet

IndVal of wage type 1BA0: No entry in table T7INA9 for key 40TL101BA0A on 2

Hi,
I have configure allowance grouping,wage type model,Pay scale type,Pay scale Level, employee group,Employee subgroup,Level.After that I hire one employee useing "T-CODE PA40".But same time system has giving following error message :- "IndVal of wage type 1BA0: No entry in table T7INA9 for key 40TL101BA0A on 20070824" so I am unable to update infotype 8.Please give me reply as early as possiable.
Regards
Subhedar B.

table t510
MANDT MOLGA TRFAR TRFGB TRFKZ TRFGR    TRFST LGART ENDDA      BEGDA      BETRG
100   IQ    01    01    1     GRADE 13 1            31.12.9999 01.01.2012              0.00
100   IQ    01    01    3     GRADE 13 1            31.12.9999 01.01.2012              0.00
t511
MANDT    100
MOLGA    IQ
LGART    1019
ENDDA    31.12.9999
BEGDA    01.01.1992
ABTYZ       1
WKTYZ     11
OPKEN
ZEINH    030
KOMBI    2
BTMIN    0
BTMAX    0
ADSUM    X
MODNA    TARIF
MODSP
RUTYP
RUDIV    0
ADDJN
MOD01    1
MOD02
MOD03    A
ANMIN    0.00
ANMAX    0.00
V_511_B
Wage Type       1019 Bonus Percentage                  01.01.1992 31.12.9999
EE Subgroup grouping   Personal subarea
0 1 2 3 4 5 6 7 8 9     0 1 2 3 4 5 6 7 8 9
          1                          1 1

Problem with No entry in table T591B for 0015 08 E101

Hi all,
This is our first year using SAP and we're approaching our first Year End and so want to make the E Wage Types available for us in IT0015, E121 is already OK and I can enter data in IT0015 for that WT no problem. I've added WT E101 to the 0015 Additional Payments in the IMG and it shows as being allowed for IT0015, this has created entries in the Permissability, etc. in the IMG and I've updated permisability for the ESG to allow for all ESG / PS, etc. - so all looks fine when I work through the steps for Additional Payments in the IMG, but when I try to save E101 in IT0015 I get a message about 'No entry in table T591B for 0015 08 E101' .
When I look at this table it's called 'WT dependent retroactive accounting trigger' and I've not seen it before despite setting up many Wage Types and I can see E121 is in this table but E101 isn't - but I can't see how I can add or copy anything in this table - there are no options. So I'm assuming this is usually auto updated by creating an entry in another table but I have no idea how to find where and can't find any documentation or other forum messages for this table.
Has anyone else come accross this before or know anything about this table - has anyone else had trouble when wanting to allow E Wage Types to be used for Year End adjustments?
Thanks in advance for any advice anyone can give me
Nyree

Olnly wt configured to be permissibled on a few infotypes (e.g. 0014, 0015, 0267) would need to be configured in V_T591B. The purpose of this is to control whether these wt are allowed to be changed after payroll is already run for the ee.
All you need to do is maintain this entry through view V_T591B - add entry for wt 'E101' for infotype 0015 / country '08'. The indicator (V5591B-ABWRU) can be '' (allow change to wt after proll is run), 'X' (warning if change after proll is run), 'E' (hard-error if change after payroll is run) .
Rgds.

No entry in table T503 for "D"

Hello Experts,
while trying to hire an employee on the IDES server, the message "No entry in table T503 for (EEgroup) " ... i checked the T503 table (T503K, and V_T503Z via TCode SM30) ... and found my EE groups and subgroups !! (as assigned through IMG) ... but still I get the same error message and i don't know why.
FYI : I was told that the IDES server is not configurable !! that is , I may not find the expected results that i make on IMG (I may create EEgroups and subgroups, assign them, but still I may not find them as expected!!)
Note:
when I choose an employee group (while hiring) and then i try to select EE subgroups, the status bar says that "No Values Found" though i had assigned EEsubgroups to the EEgroups!!
please tell me what is going on, i am really confused !!
Thanks in advance.

Hi,
1. Create the Emp Group if required through SM30 table T501. If not atleast check your EG.
2. Create the ESG if required thorugh SM30 table T503K. If already created check your ESG here.
3. For the combination of your EG and ESG make sure that country 99 (other countries) is ticked in V_T503Z via SM30.
4. Maintain the Employee attributes in V_503_C via SM30
In case if your EG or ESG is 01 then make sure that it is ZERO ONE and not O(letter) ONE.
hope this helps.
Ajay

No entry in table T001P for key - PT60

Hi Folks,
I´ve got the same error people have reported since some time in this forum, but I didn't find a clear reason or way to fix the issue.
The error "No entry in table T001P for key" is displayed for only 1 employee during time evaluation.I've checked table T001P, IT 0001, IT 0007, and everything seems tom be OK. I have other employee in same Work Schedule and other guy with same information in IT0001, but only this guy has the issue.
In other thread someone put "Make a blank entry in table and this fixes the issue", but it's not clear in how to do it or why this fixes the issue.
Thanks for any help.
(rewarded with points)

HI,
Check IT 2006 and IT0001. A valid record must exist in IT 0001 for the last 2006 record. Check BEGDA of IT2006 and review that is greater than BEGDA and lesser than ENDDA of any valid record in IT0001
If this is not happening, then RPTIME program returns empty values in table T001P and this causes the "no entry in table" message.
Regards,

No entry in table T71ADM10 for key 'X'

Hello,
While uploading data from R/3, I get this error message:
'No entry in table T71ADM10 for key "X"'
But when I look in the R/3 table T71ADM10, then I am able to find entries for the key 'X'.
Additionaly in the BI DataSource Monitor, if I click the 'Maintain PSA' button, all records are shown as updated successfully. No erronous records are returned.
Under the 'Details' tab, 'Extraction' shows error; but 'Transfer' and 'Processing' Steps are shown successful.
Please advice.
Thanks & Regards,
Labanya.

Hello Labanya,
As you telling data is available in PSA . So there is need to do update from fro PSA. So Just select that request number goto RSA1--> PSA. Then find your Request number. Check whether it has with red mark. Then right click on mouse and select "start the update immediately". And check whether you are getting same error or not.
Thanks,
Abha

No entry in table T527X for E

Hi,
The HR IDOCs are ending in error in our production system with the error:
No entry in table T527X for E
Message no. RP301
Diagnosis
The entry values must be stored in table T527X. The " E" value(s) are not in this table.
When the IDOC is reprocessed manually or by the standard program, the IDOC has OK status.
The error just started from today and we do not know as to what is causing this error.
I have checked in the FM that is processing the IDOC and I could not find nay reference to the table T527X or that message number.
Can anyone please help?
Regards,
Archana

The IDOC is being processed by a custom Function module but this program was modified
and the changes were moved to the system last week.
If IDOC was getting processes Successfully till last week, Customization done recently is the Culprit
I am thinking about the complexity of the Standard Function (which almost processes all
types of HR master data and how developer must have managed to write Custom code for all of this.
Quite Complex I think.
The main change was that in some updation BDC is now used to update the screens
directly and then PA41 tcode is being called. Do you think this might cause the issue?
But then it works in reprocessing - strange.
In some places, the standard function module is used (code not changed for this) -HR_MASTER_MAINTAIN -
(i think).
Well what all I can say is track the error message while running the IDOC for first time and
that will only give you the solution.
Regards
Shital

Entries in table BWOM_SETTINGS for PARAM_NAME = 'OBJSELSIZE '

Hello All,
The entries in table BWOM_SETTINGS for PARAM_NAME = 'OBJSELSIZE ' in our ECC system were as follows originally:
OLTPSOURCE = ''
PARAM_NAME = 'OBJSELSIZE '
PARAM_VALUE = 'X'
At that point we started using delta extarctor 0PM_OM_OPA_2 and it had a very poor performance.
SAP asked us to implement note 1040072.
As a result of applying that note, the BWOM_SETTINGS table has 2 entries for PARAM_NAME = OBJSELSIZE.
1. OLTPSOURCE = ''
PARAM_NAME = 'OBJSELSIZE '
PARAM_VALUE = 'X'
2. OLTPSOURCE = '0PM_OM_OPA_2'
PARAM_NAME = 'OBJSELSIZE '
PARAM_VALUE = 'X'
Things were fine until we added more init selections to another CO extractor, 0CO_OM_OPA_6.
0CO_OM_OPA_6 deltas were taking around 2 hours for original init selections:
Fiscal year / period 2007001 2007012
Fiscal year / period 2008001 2020012
Controlling Area 3000
Recently we added more init selections and now selections are :
Fiscal year / period 2007001 2007012
Fiscal year / period 2007001 2020012
Fiscal year / period 2008001 2020012
Controlling Area 3000
Controlling Area 4000
Controlling Area 5000
The extraction is now taking unacceptably long time, about 15 hours.
I am not sure if it is because adding more inits.
I have a feeling the entries in BWOM_SETTINGS for OBJSELSIZE are incorrect.
According to note 836740 should they be as below?
OLTPSOURCE = '0CO_OM_OPA_6'
PARAM_NAME = 'OBJSELSIZE '
PARAM_VALUE = 'X'
OLTPSOURCE = '0PM_OM_OPA_2'
PARAM_NAME = 'OBJSELSIZE'
PARAM_VALUE= 'X'"
One more question. If we change the BWOM_SETTINGS entries to as above, will that affect other CO extractors?
For instance, we use 0CO_OM_CCA_9 very widely and it runs very fast currently. I just want to make sure we dont mess up its performance by modifying the entries in BWOM_SETTINGS. May be add one more entry in BWOM_SETTINGS for 0CO_OM_CCA_9 too?
Sorry about the lengthy post.
Any help is greatly appreciated.
Thank you.

As stated in [OSS Note 836740 - Delta extractors CO: OBJSELSIZE DataSource specific|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=836740], there should be parameter OBJSELSIZE entries, with a value of X for the following CO DataSources:
0CO_OM_CCA_9
0CO_OM_OPA_6
0CO_OM_ABC_7
0CO_OM_WBS_6
0CO_OM_NAE_2
0CO_OM_NTW_2
0OC_OM_NWA_2
The independent entry, where the DataSource is blank, should also be prsent for the OBJSELSIZE parameter with a value of X. [OSS Note 1040072 - 0PM_OM_OPA_2: Poor performance|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1040072] shows that it's also needed for the 0PM_OM_OPA_2 DataSource.
Your entries for 0CO_OM_OPA6 and 0PM_OM_OPA_2 are correct. You should add 0CO_OM_CCA_9 and any other DataSource in the list above. If they're not listed, they are supposed to be taken care of by the independent entry (DataSource is blank).

How to maintain PO Header Text entry in table T166K for different PO Type

Hi,
Can anyone tell me if there is a config transaction ( or path ) to maintain PO Header Text entry in table T166K for different PO Types
Thanks
Shrikant

Spro->Material Management->Purchasing->Purchase Order->Texts for Purchase Orders.
There are 4 config setting to do for this.
Read information text.
regards,nishant
please reward if this helps

Table T522T, for Language AR-Arabic No Entries

Similar Messages

Maybe you are looking for