Table tcj_documents performance problem
Dear Friends,
i am using tcj_documents table for a simple query but its taking too much time.
my Code
select d_posting_numb into itab_bsad-d_posting_numb from tcj_documents
where comp_code = '1000' and
fisc_year = itab_bsad-gjahr2 and
posting_number = itab_bsad-awkey.
modify itab_bsad.
endselect.
any help highly appricated.
regards,
Malik
Hi,
Replace SELECT....ENDSELECT by
SELECT d_posting_numb
from tcj_documents
INTO TABLE ITAB
FOR ALL ENTRIES IN itab_bsad
Where comp_code = '1000' and
fisc_year = itab_bsad-gjahr2 and
posting_number = itab_bsad-awkey.
Loop at Itab_bsad.
Read Table Itab.....
Modify itab_bsad.
Endloop.
Edited by: AJAY TIWARI on Nov 8, 2008 9:16 PM
Similar Messages
-
Performance Problems with "For all Entries" and a big internal table
We have big Performance Problems with following Statement:
SELECT * FROM zeedmt_zmon INTO TABLE gt_zmon_help
FOR ALL ENTRIES IN gt_zmon_help
WHERE
status = 'IAI200' AND
logdat IN gs_dat AND
ztrack = gt_zmon_help-ztrack.
In the internal table gt_zmon_help are over 1000000 entries.
Anyone an Idea how to improve the Performance?
Thank you!>
Matthias Weisensel wrote:
> We have big Performance Problems with following Statement:
>
>
SELECT * FROM zeedmt_zmon INTO TABLE gt_zmon_help
> FOR ALL ENTRIES IN gt_zmon_help
> WHERE
> status = 'IAI200' AND
> logdat IN gs_dat AND
> ztrack = gt_zmon_help-ztrack.
>
> In the internal table gt_zmon_help are over 1000000 entries.
> Anyone an Idea how to improve the Performance?
>
> Thank you!
You can't expect miracles. With over a million entries in your itab any select is going to take a bit of time. Do you really need all these records in the itab? How many records is the select bringing back? I'm assuming that you have got and are using indexes on your ZEEDMT_ZMON table.
In this situation, I'd first of all try to think of another way of running the query and restricting the amount of data, but if this were not possible I'd just run it in the background and accept that it is going to take a long time. -
Performance problem with table COSS...
Hi
Anyone encountered performance problem with these table : COSS, COSB, COEP
Best Regards>
gsana sana wrote:
> Hi Guru's
>
> this is the select Query which is taking much time in Production. so please help me to improve the preformance with BSEG.
>
> this is my select query:
>
> select bukrs
> belnr
> gjahr
> bschl
> koart
> umskz
> shkzg
> dmbtr
> ktosl
> zuonr
> sgtxt
> kunnr
> from bseg
> into table gt_bseg1
> for all entries in gt_bkpf
> where bukrs eq p_bukrs
> and belnr eq gt_bkpf-belnr
> and gjahr eq p_gjahr
> and buzei in gr_buzei
> and bschl eq '40'
> and ktosl ne 'BSP'.
>
> UR's
> GSANA
Hi,
This is what I know and please if any expert think its incorrect, please do correct me.
BSEG is a cluster table with BUKRS, BELNR, GJAHR and BUZEI as the key whereas other key will be stored in database as raw data thus SAP apps will need to convert that raw data first if we are using other keys in where condition. Hence, I suggest to use up to buzei in the where condition and filter other condition in internal table level like using Delete statement. Hope its help.
Regards,
Abraham -
Performance problem when printing - table TSPEVJOB big size
Hi,
in a SAP ERP system there is performance problem when printing because table TSPEVJOB has many millions of entries.
This table has reached a considerable size (about 90 Gb); db size is 200 Gb.
Standard reports have been scheduled correctly and kernel of SAP ERP system is updated.
I've tried to scheduled report RSPO1041 (instead of RSPO0041) to reduce entries but it is not possible run it during normal operations because it locks the printing system.
Do you know why this table has increased ?
Are there any reports to clean this table or other methods ?
Thanks.
Maurizio ManeraDear,
Please see the Note 706478 - Preventing Basis tables from increasing considerably and
Note 195157 - Application log: Deletion of logs.
Note 1566659 - Table TSPEVJOB is filled excessively
Note 1293472 - Spool work process hangs on semaphore 43
Note 1362343 - Deadlocks in table TSP02 and TSPEVJOB
Note 996455 - Deadlocks on TSP02 or TSPEVJOB when you delete
For more information see the below link as,
http://www.sqlservercurry.com/2008/04/how-to-delete-records-from-large-table.html
http://www.sqlteam.com/forums/topic.asp?TOPIC_ID=91179
http://www.sqlteam.com/forums/topic.asp?TOPIC_ID=83525
If any doubts Let me know.
Thomas
Edited by: thomas_raja on Aug 7, 2011 12:29 PM -
Performance problem(ANEA/ANEP table) in Select statement
Hi
I am using below select statement to fetch data.
Does the below where statement have performance issue?
can you Pls suggest.
1)In select of ANEP table, i am not using all the Key field in where condition. will it have performance problem?
2)does the order of where condition should be same as in table, if any one field order change also will have effect performance
SELECT bukrs
anln1
anln2
afabe
gjahr
peraf
lnran
bzdat
bwasl
belnr
buzei
anbtr
lnsan
FROM anep
INTO TABLE o_anep
FOR ALL ENTRIES IN i_anla
WHERE bukrs = i_anla-bukrs
AND anln1 = i_anla-anln1
AND anln2 = i_anla-anln2
AND afabe IN s_afabe
AND bzdat =< p_date
AND bwasl IN s_bwasl.
SELECT bukrs
anln1
anln2
gjahr
lnran
afabe
aufwv
nafal
safal
aafal
erlbt
aufwl
nafav
aafav
invzv
invzl
FROM anea
INTO TABLE o_anea
FOR ALL ENTRIES IN o_anep
WHERE bukrs = o_anep-bukrs
AND anln1 = o_anep-anln1
AND anln2 = o_anep-anln2
AND gjahr = o_anep-gjahr
AND lnran = o_anep-lnran
AND afabe = o_anep-afabe.
Moderator message: Please Read before Posting in the Performance and Tuning Forum
Edited by: Thomas Zloch on Aug 9, 2011 9:37 AM1. Yes. If you have only a few primary keys in youe WHERE condition that does affect the performance. But some times requirement itself may be in that way. We may not be knowing all the primary keys to given them in WHER conditon. If you know the values, then provide them without fail.
2. Yes. It's better to always follow the sequence in WHERE condition and even in the fields being fetched.
One important point is, whenever you use FOR ALL ENTRIES IN, please make sure that the itab IS NOT INITIAL i.e. the itab must have been filled in. So, place the same conditin before both the SELECT queries like:
IF i_anla[] IS NOT INITIAL.
SELECT bukrs
anln1
anln2
afabe
gjahr
peraf
lnran
bzdat
bwasl
belnr
buzei
anbtr
lnsan
FROM anep
INTO TABLE o_anep
FOR ALL ENTRIES IN i_anla
WHERE bukrs = i_anla-bukrs
AND anln1 = i_anla-anln1
AND anln2 = i_anla-anln2
AND afabe IN s_afabe
AND bzdat =< p_date
AND bwasl IN s_bwasl.
ENDIF.
IF o_anep[] IS NOT INITIAL.
SELECT bukrs
anln1
anln2
gjahr
lnran
afabe
aufwv
nafal
safal
aafal
erlbt
aufwl
nafav
aafav
invzv
invzl
FROM anea
INTO TABLE o_anea
FOR ALL ENTRIES IN o_anep
WHERE bukrs = o_anep-bukrs
AND anln1 = o_anep-anln1
AND anln2 = o_anep-anln2
AND gjahr = o_anep-gjahr
AND lnran = o_anep-lnran
AND afabe = o_anep-afabe.
ENDIF. -
Performance problem with query on bkpf table
hi good morning all ,
i ahave a performance problem with a below query on bkpf table .
SELECT bukrs
belnr
gjahr
FROM bkpf
INTO TABLE ist_bkpf_temp
WHERE budat IN s_budat.
is ther any possibility to improve the performanece by using index .
plz help me ,
thanks in advance ,
regards ,
srinivashi,
if u can add bukrs as input field or if u have bukrs as part of any other internal table to filter out the data u can use:
for ex:
SELECT bukrs
belnr
gjahr
FROM bkpf
INTO TABLE ist_bkpf_temp
WHERE budat IN s_budat
and bukrs in s_bukrs.
or
SELECT bukrs
belnr
gjahr
FROM bkpf
INTO TABLE ist_bkpf_temp
for all entries in itab
WHERE budat IN s_budat
and bukrs = itab-bukrs.
Just see , if it is possible to do any one of the above?? It has to be verified with ur requirement. -
Performance problems - query on the copy of a table is faster than the orig
Hi all,
I have sql (select) performance problems with a specific table (costs 7800)(Oracle 10.2.0.4.0, Linux).
So I copied the table 1:1 (same structure, same data, same indexes etc. ) under the same area (database, user, tablespace etc.) and gathered the table_stats with the same parameters. The same query on this copied table is faster and the costs are just 3600.
Why for gods sake is the query on this new table faster??
I appreciate any idea.
Thank you!
Fibo
Edited by: user954903 on 13.01.2010 04:23Could you please share more information/link which can elaborate the significance of using SHRINK clause.
If this is so useful and can shrink the unused space , why not my database architect has suggested this :).
Any disadvantage also?It moves the highwater mark back to the lowest position, therefore full tables scans would work faster in some cases. Also it can reduce number of migrated rows and number of used blocks.
Disadvantage is that it involves row movement, so operations which based on rowid are permitted during the shrinking.
I think it is even better to stop all operations on the table when shrinking and disable all triggers. Another problem is that this process can take a long time.
Guru's, please correct me if I'm mistaken.
Edited by: Oleg Gorskin on 13.01.2010 5:50 -
Performance problem: 1.000 queries over a 1.000.000 rows table
Hi everybody!
I have a difficult performance problem: I use JDBC over an ORACLE database. I need to build a map using data from a table with around 1.000.000 rows. My query is very simple (see the code) and takes an average of 900 milliseconds, but I must perform around 1.000 queries with different parameters. The final result is that user must wait several minutes (plus the time needed to draw the map and send it to the client)
The code, very simplified, is the following:
String sSQLCreateView =
"CREATE VIEW " + sViewName + " AS " +
"SELECT RIGHT_ASCENSION, DECLINATION " +
"FROM T_EXO_TARGETS " +
"WHERE (RIGHT_ASCENSION BETWEEN " + dRaMin + " AND " + dRaMax + ") " +
"AND (DECLINATION BETWEEN " + dDecMin + " AND " + dDecMax + ")";
String sSQLSentence =
"SELECT COUNT(*) FROM " + sViewName +
" WHERE (RIGHT_ASCENSION BETWEEN ? AND ?) " +
"AND (DECLINATION BETWEEN ? AND ?)";
PreparedStatement pstmt = in_oDbConnection.prepareStatement(sSQLSentence);
for (int i = 0; i < 1000; i++)
pstmt.setDouble(1, a);
pstmt.setDouble(2, b);
pstmt.setDouble(3, c);
pstmt.setDouble(4, d);
ResultSet rset = pstmt.executeQuery();
X = rset.getInt(1);
I have yet created index with RIGHT_ASCENSION and DECLINATION fields (trying different combinations).
I have tried yet multi-threads, with very bad results
Has anybody a suggestion ?
Thank you very much!How many total rows are there likely to be in the View you create?
Perhaps just do a select instead of a view, and loop thru the resultset totalling the ranges in java instead of trying to have 1000 queries do the job. Something like:
int iMaxRanges = 1000;
int iCount[] = new int[iMaxRanges];
class Range implements Comparable
float fAMIN;
float fAMAX;
float fDMIN;
float fDMAX;
float fDelta;
public Range(float fASC_MIN, float fASC_MAX, float fDEC_MIN, float fDEC_MAX)
fAMIN = fASC_MIN;
fAMAX = fASC_MAX;
fDMIN = fDEC_MIN;
fDMAX = fDEC_MAX;
public int compareTo(Object range)
Range comp = (Range)range;
if (fAMIN < comp.fAMIN)
return -1;
if (fAMAX > comp.fAMAX)
return 1;
if (fDMIN < comp.fDMIN)
return -1;
if (fDMAX > comp.fDMAX)
return 1;
return 0;
List listRanges = new ArrayList(iMaxRanges);
listRanges.add(new Range(1.05, 1.10, 120.5, 121.5));
//...etc.
String sSQL =
"SELECT RIGHT_ASCENSION, DECLINATION FROM T_EXO_TARGETS " +
"WHERE (RIGHT_ASCENSION BETWEEN " + dRaMin + " AND " + dRaMax + ") " +
"AND (DECLINATION BETWEEN " + dDecMin + " AND " + dDecMax + ")";
Statement stmt = in_oDbConnection.createStatement();
ResultSet rset = stmt.executeQuery(sSQL);
while (rset.next())
float fASC = rset.getFloat("RIGHT_ASCENSION");
flaot fDEC = rset.getFloat("DECLINATION");
int iRange = Collections.binarySearch(listRanges, new Range(fASC, fASC, fDEC, fDEC));
if (iRange >= 0)
++iCount[iRange]; -
CCM performance problems table info needed!!
Hello,
We have iimpemented SRM50 wit hCCM 200_700 level 6. We have serious performance problems when uploading content and publishing the catalogs. Does anybody know, as we have 29 procurement catalogs, if for all catalogs the entres are entered in the table /CCM/D_ITM.
We have 29 catalogs but only 4000 items so we think the entries are double. How many items and catalogs should CCM be able to handle ?
Thanks of course i will reward points
Kind regards,
Antoinette StorkHi,
See this related thread/notes:
Re: items in catalog not flagged as "approved"
Note 919725 - BBP_CCM_TRANSFER_CATALOG - Performance Improvement
BR,
Disha.
Do reward points for useful answers. -
PL/SQL Performance problem
I am facing a performance problem with my current application (PL/SQL packaged procedure)
My application takes data from 4 temporary tables, does a lot of validation and
puts them into permanent tables.(updates if present else inserts)
One of the temporary tables is parent table and can have 0 or more rows in
the other tables.
I have analyzed all my tables and indexes and checked all my SQLs
They all seem to be using the indexes correctly.
There are 1.6 million records combined in all 4 tables.
I am using Oracle 8i.
How do I determine what is causing the problem and which part is taking time.
Please help.
The skeleton of the code which we have written looks like this
MAIN LOOP ( 255308 records)-- Parent temporary table
-----lots of validation-----
update permanent_table1
if sql%rowcount = 0 then
insert into permanent_table1
Loop2 (0-5 records)-- child temporary table1
-----lots of validation-----
update permanent_table2
if sql%rowcount = 0 then
insert into permanent_table2
end loop2
Loop3 (0-5 records)-- child temporary table2
-----lots of validation-----
update permanent_table3
if sql%rowcount = 0 then
insert into permanent_table3
end loop3
Loop4 (0-5 records)-- child temporary table3
-----lots of validation-----
update permanent_table4
if sql%rowcount = 0 then
insert into permanent_table4
end loop4
-- COMMIT after every 3000 records
END MAIN LOOP
Thanks
Ashwin N.Do this intead of ditching the PL/SQL.
DECLARE
TYPE NumTab IS TABLE OF NUMBER(4) INDEX BY BINARY_INTEGER;
TYPE NameTab IS TABLE OF CHAR(15) INDEX BY BINARY_INTEGER;
pnums NumTab;
pnames NameTab;
t1 NUMBER(5);
t2 NUMBER(5);
t3 NUMBER(5);
BEGIN
FOR j IN 1..5000 LOOP -- load index-by tables
pnums(j) := j;
pnames(j) := 'Part No. ' || TO_CHAR(j);
END LOOP;
t1 := dbms_utility.get_time;
FOR i IN 1..5000 LOOP -- use FOR loop
INSERT INTO parts VALUES (pnums(i), pnames(i));
END LOOP;
t2 := dbms_utility.get_time;
FORALL i IN 1..5000 -- use FORALL statement
INSERT INTO parts VALUES (pnums(i), pnames(i));
get_time(t3);
dbms_output.put_line('Execution Time (secs)');
dbms_output.put_line('---------------------');
dbms_output.put_line('FOR loop: ' || TO_CHAR(t2 - t1));
dbms_output.put_line('FORALL: ' || TO_CHAR(t3 - t2));
END;
Try this link, http://download-west.oracle.com/docs/cd/B10501_01/appdev.920/a96624/05_colls.htm#23723 -
JRC 2: Performance Problem
Hi.
Our reporting component used JRC 1.x before we upgraded to JRC 2.x. We got two issues after upgrading.
First issue I solved already with a workaround which I published on stackoverflow.com. (1) Does anyone knows where I will find the issue management system to report this issue?
Second issue occurs big performance problem within our project. We opened a report with 6 subreports (which includes 1 upto 3 tables) in 2-4 seconds using JRC 1. If we will open same report using JRC 2, we wait upto 60 seconds.
This methods requires more time with JRC 2 comparing to JRC 1:
ReportClientDocument#open(String, int);
SubreportController#setTableLocation(String, ITable, ITable)
DatabaseController#setTableLocation(ITable, ITable)
Each invocation of one of these methods requires 2-4 seconds.
Thank you in advance.
Best regards
Thomas
(1) http://stackoverflow.com/questions/479405/replace-a-database-connection-for-subreports-with-jrchello ....
my report is ''crystal report 11'' => "OLE DB" => "Add Command(select * from table) " .
code(JRC) : eclipse + crystal report for eclipse version 2 => "cr4e-all-in-one-win_2.0.1.zip"
<%@ page contentType="text/html; charset=UTF-8"
import="
com.crystaldecisions.report.web.viewer.CrystalReportViewer,
com.crystaldecisions.reports.sdk.ReportClientDocument,
com.crystaldecisions.sdk.occa.report.lib.ReportSDKExceptionBase,
java.sql.Connection,
java.sql.DriverManager,
java.sql.ResultSet,
java.sql.SQLException,
java.sql.Statement" %>
<%
try {
String reportName = "report.rpt";
ReportClientDocument clientDoc = new ReportClientDocument();
clientDoc.open(reportName, 0);
String tableAlias = "Command";
clientDoc.getDatabaseController().setDataSource(myResult("SELECT * FROM table"), tableAlias,tableAlias);
CrystalReportViewer crystalReportPageViewer = new CrystalReportViewer();
crystalReportPageViewer.setReportSource(clientDoc.getReportSource());
crystalReportPageViewer.processHttpRequest(request, response, application, null);
} catch (ReportSDKExceptionBase e) {
e.printStackTrace();
out.println(e);
%>
I simplified the code, *myResult("SELECT * FROM table") * is absolutely no problem ,
and this code is absolutely no problem in the "crystal report for eclipse "version 1
but in version 2 run error:
com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: u7121u6CD5u9810u671Fu7684u8CC7u6599u5EABu9023u7DDAu5668u932Fu8AA4---- Error code:-2147467259 Error code name:failed
at com.businessobjects.reports.sdk.JRCCommunicationAdapter.a(Unknown Source)
at com.businessobjects.reports.sdk.JRCCommunicationAdapter.a(Unknown Source)
at com.businessobjects.reports.sdk.JRCCommunicationAdapter.if(Unknown Source)
at com.businessobjects.reports.sdk.JRCCommunicationAdapter.a(Unknown Source)
at com.businessobjects.reports.sdk.JRCCommunicationAdapter$2.a(Unknown Source)
at com.businessobjects.reports.sdk.JRCCommunicationAdapter$2.call(Unknown Source)
at com.crystaldecisions.reports.common.ThreadGuard.syncExecute(Unknown Source)
at com.businessobjects.reports.sdk.JRCCommunicationAdapter.for(Unknown Source)
at com.businessobjects.reports.sdk.JRCCommunicationAdapter.int(Unknown Source)
at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(Unknown Source)
at com.businessobjects.sdk.erom.jrc.a.a(Unknown Source)
at com.businessobjects.sdk.erom.jrc.a.execute(Unknown Source)
at com.crystaldecisions.proxy.remoteagent.RemoteAgent$a.execute(Unknown Source)
at com.crystaldecisions.proxy.remoteagent.CommunicationChannel.a(Unknown Source)
at com.crystaldecisions.proxy.remoteagent.RemoteAgent.a(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.ReportClientDocument.if(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.ReportClientDocument.a(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.ReportClientDocument.new(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.b9.onDataSourceChanged(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.DatabaseController.a(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.DatabaseController.a(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.DatabaseController.setDataSource(Unknown Source)
at org.apache.jsp.No_005f1.Eclipse_005fJTDS_005fSQL2005_005fTable_002dviewer_jsp._jspService(Eclipse_005fJTDS_005fSQL2005_005fTable_002dviewer_jsp.java:106)
at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:70)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:374)
at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:342)
at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:267)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:233)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:128)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:286)
at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:845)
at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.java:583)
at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:447)
at java.lang.Thread.run(Unknown Source)
Caused by: com.crystaldecisions.reports.common.QueryEngineException: u7121u6CD5u9810u671Fu7684u8CC7u6599u5EABu9023u7DDAu5668u932Fu8AA4
at com.crystaldecisions.reports.queryengine.Connection.bf(Unknown Source)
at com.crystaldecisions.reports.queryengine.Rowset.z3(Unknown Source)
at com.crystaldecisions.reports.queryengine.Rowset.bL(Unknown Source)
at com.crystaldecisions.reports.queryengine.Rowset.zM(Unknown Source)
at com.crystaldecisions.reports.queryengine.Connection.a(Unknown Source)
at com.crystaldecisions.reports.queryengine.Table.a(Unknown Source)
at com.crystaldecisions.reports.queryengine.Table.if(Unknown Source)
at com.crystaldecisions.reports.queryengine.Table.try(Unknown Source)
at com.crystaldecisions.reports.queryengine.Table.a(Unknown Source)
at com.crystaldecisions.reports.queryengine.Table.u7(Unknown Source)
at com.crystaldecisions.reports.datafoundation.DataFoundation.a(Unknown Source)
at com.crystaldecisions.reports.dataengine.dfadapter.DFAdapter.a(Unknown Source)
at com.crystaldecisions.reports.dataengine.dfadapter.CheckDatabaseHelper.a(Unknown Source)
at com.crystaldecisions.reports.dataengine.datafoundation.CheckDatabaseCommand.new(Unknown Source)
at com.crystaldecisions.reports.common.CommandManager.a(Unknown Source)
at com.crystaldecisions.reports.common.Document.a(Unknown Source)
at com.crystaldecisions.reports.dataengine.VerifyDatabaseCommand.new(Unknown Source)
at com.crystaldecisions.reports.common.CommandManager.a(Unknown Source)
at com.crystaldecisions.reports.common.Document.a(Unknown Source)
at com.businessobjects.reports.sdk.requesthandler.f.a(Unknown Source)
at com.businessobjects.reports.sdk.requesthandler.DatabaseRequestHandler.a(Unknown Source)
at com.businessobjects.reports.sdk.requesthandler.DatabaseRequestHandler.if(Unknown Source)
at com.businessobjects.reports.sdk.JRCCommunicationAdapter.do(Unknown Source)
... 39 more
Please help me and tell me why.... -
Performance problem with S873,S691,S679,S716
Hi All,
I am using tables S873,S691,S679,S716 in my report. Since these have huge data its creating performance problem. Right now i am selecting data from tables as Select single.. in Loop.. endloop.
If i try to get it out and use FOR ALL ENTRIES, its taking longer time.
I dont have all keys with me and i m trying to use index whereever possible.
Any hints, comments are really appreciable.
My code goes like this.
This is not a full code... only a part where i am fetching data from 'S' tables.
loop at i_mvke.
SELECT kunnr zzobklgq zzcbklgq
FROM s679 INTO
(s679-kunnr,s679-zzobklgq,s679-zzcbklgq) WHERE
matnr EQ i_mvke-matnr AND
vrsio EQ p_versn AND
sptag IN s_billed AND
werks EQ p_werks AND
vkorg EQ i_mvke-vkorg AND
kunnr IN s_kunnr.
SELECT SUM( zznslqty ) FROM s691 INTO
w_s691_net_bill_qty WHERE
Use index Z5
matnr EQ i_mvke-matnr AND
spmon EQ w_spmon AND
vrsio EQ p_versn AND
werks EQ p_werks AND
vkorg EQ i_mvke-vkorg AND
kunnr IN s_kunnr."
SELECT SUM( zznslqty ) SUM( zzninvnum ) FROM s873 INTO
(work01-zznslqty, work01-zzninvnum) WHERE
use index Z02
vkorg EQ i_mvke-vkorg AND
werks EQ p_werks AND
matnr EQ i_mvke-matnr AND
sptag IN s_billed AND
vrsio EQ p_versn AND
kunnr IN s_kunnr.
SELECT zcrdotov FROM s716 INTO s716-zcrdotov WHERE
matnr EQ i_mvke-matnr AND
sptag IN s_billed AND
vkorg EQ i_mvke-vkorg AND
kunnr IN s_kunnr AND
werks = p_werks AND
vrsio EQ p_versn.
GET THE RECORD TOTAL
ADD 1 TO w_s716_total_count.
GET THE ONTIME TOTAL
IF s716-zcrdotov = 1.
ADD 1 TO w_s716_ontime_count.
ENDIF.
ENDSELECT.
PERFORM fill_output_table.
endloop. "i_mvke
Message was edited by: Agasti Kalehi
good
wrong->
SELECT kunnr zzobklgq zzcbklgq
FROM s679 INTO
(s679-kunnr,s679-zzobklgq,s679-zzcbklgq) WHERE
matnr EQ i_mvke-matnr AND
vrsio EQ p_versn AND
sptag IN s_billed AND
werks EQ p_werks AND
vkorg EQ i_mvke-vkorg AND
kunnr IN s_kunnr.
write->
SELECT kunnr zzobklgq zzcbklgq
FROM s679 INTO CORRESPONDING FIELDS OF TABLE I_MVKE
WHERE
matnr EQ i_mvke-matnr AND
vrsio EQ p_versn AND
sptag IN s_billed AND
werks EQ p_werks AND
vkorg EQ i_mvke-vkorg AND
kunnr IN s_kunnr.
do the changes accordingly in the below select statements. you have not post the detail report otherwise i could have help you in other select statements also.
thanks
mrutyun -
Performance problem in ABAP code
hai guys,
I created report using tables like bsis,t001 etc,( tax report).
I have performance problem in this report.
COuld you pls tell me how to analyse the report and find out the place where process is taking more memory etc.
i did abap trace and runtime analysis..but could not find out exact point.
how to do this..
i want to analysis each subroutine,internal table and query process.
could you pls give me some ideas.
ambichanThere is an excellent tool available in SAP - <b>Code Inspector.
</b>
Transaction is SCII
Try the following link and I am sure you will find a bunch of useful documents.
<a href="http://www.google.co.in/search?hl=en&safe=off&q=site%3Asdn.sap.comfiletype%3ApdfCode+Inspector&btnG=Search&meta=">ABAP Performance</a>
I use the Code Inspector to search for
a) All the select statements which are present within the loop
b) Nested Loops
c) Select query without providing criteria for primary keys, depending upon situation
d) Can the search be narrowed with extra conditions
e) Using READ .. BINARY SEARCH if internal table has lots of records.
The list is actually endless, but this is something to start with.
You can actually have a checklist, and depending upon it, go through your code. The more you adhere to checklist, you will find that, the performance would dramatically improve.
Also use <b>ST05</b> transaction, for SQL Trace and find out which select query is taking the maximum time for response.
Regards,
Subramanian V. -
Report program Performance problem
Hi All,
one object is taking 30hr for executing.some one develped this in 1998 but this time it is a big Performance problem.please some one helep what to do i am giving that code.
*--DOCUMENTATION--
Programe written by : 31.03.1998 .
Purpose : this programe updates the car status into the table zsdtab1
This programe is to be schedule in the backgroud periodically .
Querries can be fired on the table zsdtab1 to get the details of the
Car .
This programe looks at the changes made in the material master from
last updated date and the new entries in material master and updates
the tables zsdtab1 .
Changes in the Sales Order are not taken into account .
To get a fresh data set the value of zupddate in table ZSTATUS as
01.01.1998 . All the data will be refreshed from that date .
Program Changed on 23/7/2001 after version upgrade 46b by jyoti
Addition of New tables for Ibase
tables used -
tables : mara , " Material master
ausp , " Characteristics table .
zstatus , " Last updated status table .
zsdtab1 , " Central database table to be maintained .
vbap , " Sales order header table .
vbak , " Sales order item table .
kna1 , " Customer master .
vbrk ,
vbrp ,
bkpf ,
bseg ,
mseg ,
mkpf ,
vbpa ,
vbfa ,
t005t . " Country details tabe .
--NEW TABLES ADDEDFOR VERSION 4.6B--
tables : ibsymbol ,ibin , ibinvalues .
data : vatinn like ibsymbol-atinn , vatwrt like ibsymbol-atwrt ,
vatflv like ibsymbol-atflv .
*--types definition--
types : begin of mara_itab_type ,
matnr like mara-matnr ,
cuobf like mara-cuobf ,
end of mara_itab_type ,
begin of ausp_itab_type ,
atinn like ausp-atinn ,
atwrt like ausp-atwrt ,
atflv like ausp-atflv ,
end of ausp_itab_type .
data : mara_itab type mara_itab_type occurs 500 with header line ,
zsdtab1_itab like zsdtab1 occurs 500 with header line ,
ausp_itab type ausp_itab_type occurs 500 with header line ,
last_date type d ,
date type d .
data: length type i.
clear mara_itab . refresh mara_itab .
clear zsdtab1_itab . refresh zsdtab1_itab .
select single zupddate into last_date from zstatus
where programm = 'ZSDDET01' .
select matnr cuobf into (mara_itab-matnr , mara_itab-cuobf) from mara
where mtart eq 'FERT' or mtart = 'ZCBU'.
where MATNR IN MATERIA
and ERSDA IN C_Date
and MTART in M_TYP.
append mara_itab .
endselect .
loop at mara_itab.
clear zsdtab1_itab .
zsdtab1_itab-commno = mara_itab-matnr .
Get the detailed data into internal table ausp_itab .----------->>>
clear ausp_itab . refresh ausp_itab .
--change starts--
select atinn atwrt atflv into (ausp_itab-atinn , ausp_itab-atwrt ,
ausp_itab-atflv) from ausp
where objek = mara_itab-matnr .
append ausp_itab .
endselect .
clear ausp_itab .
select atinn atwrt atflv into (ausp_itab-atinn , ausp_itab-atwrt ,
ausp_itab-atflv) from ibin as a inner join ibinvalues as b
on ain_recno = bin_recno
inner join ibsymbol as c
on bsymbol_id = csymbol_id
where a~instance = mara_itab-cuobf .
append ausp_itab .
endselect .
----CHANGE ENDS HERE -
sort ausp_itab by atwrt.
loop at ausp_itab .
clear date .
case ausp_itab-atinn .
when '0000000094' .
zsdtab1_itab-model = ausp_itab-atwrt . " model .
when '0000000101' .
zsdtab1_itab-drive = ausp_itab-atwrt . " drive
when '0000000095' .
zsdtab1_itab-converter = ausp_itab-atwrt . "converter
when '0000000096' .
zsdtab1_itab-transmssn = ausp_itab-atwrt . "transmission
when '0000000097' .
zsdtab1_itab-colour = ausp_itab-atwrt . "colour
when '0000000098' .
zsdtab1_itab-ztrim = ausp_itab-atwrt . "trim
when '0000000103' .
*=========Sujit 14-Mar-2006
IF AUSP_ITAB-ATWRT(3) EQ 'WDB' OR AUSP_ITAB-ATWRT(3) EQ 'WDD'
OR AUSP_ITAB-ATWRT(3) EQ 'WDC' OR AUSP_ITAB-ATWRT(3) EQ 'KPD'.
ZSDTAB1_ITAB-CHASSIS_NO = AUSP_ITAB-ATWRT+3(14).
ELSE.
ZSDTAB1_ITAB-CHASSIS_NO = AUSP_ITAB-ATWRT . "chassis no
ENDIF.
zsdtab1_itab-chassis_no = ausp_itab-atwrt . "chassis no
*=========14-Mar-2006
when '0000000166' .
----25.05.04
length = strlen( ausp_itab-atwrt ).
if length < 15. "***aded by patil
zsdtab1_itab-engine_no = ausp_itab-atwrt . "ENGINE NO
else.
zsdtab1_itab-engine_no = ausp_itab-atwrt+13(14)."Aded on 21.05.04 patil
endif.
----25.05.04
when '0000000104' .
zsdtab1_itab-body_no = ausp_itab-atwrt . "BODY NO
when '0000000173' . "21.06.98
zsdtab1_itab-cockpit = ausp_itab-atwrt . "COCKPIT NO . "21.06.98
when '0000000102' .
zsdtab1_itab-dest = ausp_itab-atwrt . "destination
when '0000000105' .
zsdtab1_itab-airbag = ausp_itab-atwrt . "AIRBAG
when '0000000110' .
zsdtab1_itab-trailer_no = ausp_itab-atwrt . "TRAILER_NO
when '0000000109' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-fininspdat = date . "FIN INSP DATE
when '0000000108' .
zsdtab1_itab-entrydate = ausp_itab-atwrt . "ENTRY DATE
when '0000000163' .
zsdtab1_itab-regist_no = ausp_itab-atwrt . "REGIST_NO
when '0000000164' .
zsdtab1_itab-mech_key = ausp_itab-atwrt . "MECH_KEY
when '0000000165' .
zsdtab1_itab-side_ab_rt = ausp_itab-atwrt . "SIDE_AB_RT
when '0000000171' .
zsdtab1_itab-side_ab_lt = ausp_itab-atwrt . "SIDE_AB_LT
when '0000000167' .
zsdtab1_itab-elect_key = ausp_itab-atwrt . "ELECT_KEY
when '0000000168' .
zsdtab1_itab-head_lamp = ausp_itab-atwrt . "HEAD_LAMP
when '0000000169' .
zsdtab1_itab-tail_lamp = ausp_itab-atwrt . "TAIL_LAMP
when '0000000170' .
zsdtab1_itab-vac_pump = ausp_itab-atwrt . "VAC_PUMP
when '0000000172' .
zsdtab1_itab-sd_ab_sn_l = ausp_itab-atwrt . "SD_AB_SN_L
when '0000000174' .
zsdtab1_itab-sd_ab_sn_r = ausp_itab-atwrt . "SD_AB_SN_R
when '0000000175' .
zsdtab1_itab-asrhydunit = ausp_itab-atwrt . "ASRHYDUNIT
when '0000000176' .
zsdtab1_itab-gearboxno = ausp_itab-atwrt . "GEARBOXNO
when '0000000177' .
zsdtab1_itab-battery = ausp_itab-atwrt . "BATTERY
when '0000000178' .
zsdtab1_itab-tyretype = ausp_itab-atwrt . "TYRETYPE
when '0000000179' .
zsdtab1_itab-tyremake = ausp_itab-atwrt . "TYREMAKE
when '0000000180' .
zsdtab1_itab-tyresize = ausp_itab-atwrt . "TYRESIZE
when '0000000181' .
zsdtab1_itab-rr_axle_no = ausp_itab-atwrt . "RR_AXLE_NO
when '0000000183' .
zsdtab1_itab-ff_axl_nor = ausp_itab-atwrt . "FF_AXLE_NO_rt
when '0000000182' .
zsdtab1_itab-ff_axl_nol = ausp_itab-atwrt . "FF_AXLE_NO_lt
when '0000000184' .
zsdtab1_itab-drivairbag = ausp_itab-atwrt . "DRIVAIRBAG
when '0000000185' .
zsdtab1_itab-st_box_no = ausp_itab-atwrt . "ST_BOX_NO
when '0000000186' .
zsdtab1_itab-transport = ausp_itab-atwrt . "TRANSPORT
when '0000000106' .
zsdtab1_itab-trackstage = ausp_itab-atwrt . " tracking stage
when '0000000111' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-dat_trk_1 = date . " tracking date for 1.
when '0000000112' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-dat_trk_5 = date . " tracking date for 5.
when '0000000113' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-dat_trk_10 = date . "tracking date for 10
when '0000000114' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-dat_trk_15 = date . "tracking date for 15
when '0000000115' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-dat_trk_20 = date . " tracking date for 20
when '0000000116' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-dat_trk_25 = date . " tracking date for 25
when '0000000117' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-dat_trk_30 = date . "tracking date for 30
when '0000000118' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-dat_trk_35 = date . "tracking date for 35
when '0000000119' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-dat_trk_40 = date . " tracking date for 40
when '0000000120' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-dat_trk_45 = date . " tracking date for 45
when '0000000121' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-dat_trk_50 = date . "tracking date for 50
when '0000000122' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-dat_trk_55 = date . "tracking date for 55
when '0000000123' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-dat_trk_60 = date . " tracking date for 60
when '0000000124' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-dat_trk_65 = date . " tracking date for 65
when '0000000125' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-dat_trk_70 = date . "tracking date for 70
when '0000000126' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-dat_trk_75 = date . "tracking date for 75
when '0000000127' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-dat_trk_78 = date . " tracking date for 78
when '0000000203' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-dat_trk_79 = date . " tracking date for 79
when '0000000128' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-dat_trk_80 = date . " tracking date for 80
when '0000000129' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-dat_trk_85 = date . "tracking date for 85
when '0000000130' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-dat_trk_90 = date . "tracking date for 90
when '0000000131' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-dat_trk_95 = date . "tracking date for 95
when '0000000132' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-dattrk_100 = date . " tracking date for100
when '0000000133' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-dattrk_110 = date . " tracking date for110
when '0000000134' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-dattrk_115 = date . "tracking date for 115
when '0000000135' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-dattrk_120 = date . "tracking date for 120
when '0000000136' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-dattrk_105 = date . "tracking date for 105
when '0000000137' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-pdt_tk_1 = date . "plan trk date for 1
when '0000000138' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-pdt_tk_5 = date . "plan trk date for 5
when '0000000139' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-pdt_tk_10 = date . "plan trk date for 10
when '0000000140' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-pdt_tk_15 = date . "plan trk date for 15
when '0000000141' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-pdt_tk_20 = date . "plan trk date for 20
when '0000000142' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-pdt_tk_25 = date . "plan trk date for 25
when '0000000143' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-pdt_tk_30 = date . "plan trk date for 30
when '0000000144' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-pdt_tk_35 = date . "plan trk date for 35
when '0000000145' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-pdt_tk_40 = date . "plan trk date for 40
when '0000000146' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-pdt_tk_45 = date . "plan trk date for 45
when '0000000147' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-pdt_tk_50 = date . "plan trk date for 50
when '0000000148' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-pdt_tk_55 = date . "plan trk date for 55
when '0000000149' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-pdt_tk_60 = date . "plan trk date for 60
when '0000000150' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-pdt_tk_65 = date . "plan trk date for 65
when '0000000151' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-pdt_tk_70 = date . "plan trk date for 70
when '0000000152' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-pdt_tk_75 = date . "plan trk date for 75
when '0000000153' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-pdt_tk_78 = date . "plan trk date for 78
when '0000000202' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-pdt_tk_79 = date . "plan trk date for 79
when '0000000154' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-pdt_tk_80 = date . "plan trk date for 80
when '0000000155' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-pdt_tk_85 = date . "plan trk date for 85
when '0000000156' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-pdt_tk_90 = date . "plan trk date for 90
when '0000000157' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-pdt_tk_95 = date . "plan trk date for 95
when '0000000158' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-pdt_tk_100 = date . "plan trk date for 100
when '0000000159' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-pdt_tk_105 = date . "plan trk date for 105
when '0000000160' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-pdt_tk_110 = date . "plan trk date for 110
when '0000000161' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-pdt_tk_115 = date . "plan trk date for 115
when '0000000162' .
perform date_convert using ausp_itab-atflv changing date .
zsdtab1_itab-pdt_tk_120 = date . "plan trk date for 120
********Additional fields / 24.05.98**********************************
when '0000000099' .
case ausp_itab-atwrt .
when '540' .
zsdtab1_itab-roll_blind = 'X' .
when '482' .
zsdtab1_itab-ground_clr = 'X' .
when '551' .
zsdtab1_itab-anti_theft = 'X' .
when '882' .
zsdtab1_itab-anti_tow = 'X' .
when '656' .
zsdtab1_itab-alloy_whel = 'X' .
when '265' .
zsdtab1_itab-del_class = 'X' .
when '280' .
zsdtab1_itab-str_wheel = 'X' .
when 'CDC' .
zsdtab1_itab-cd_changer = 'X' .
when '205' .
zsdtab1_itab-manual_eng = 'X' .
when '273' .
zsdtab1_itab-conn_handy = 'X' .
when '343' .
zsdtab1_itab-aircleaner = 'X' .
when '481' .
zsdtab1_itab-metal_sump = 'X' .
when '533' .
zsdtab1_itab-speaker = 'X' .
when '570' .
zsdtab1_itab-arm_rest = 'X' .
when '580' .
zsdtab1_itab-aircond = 'X' .
when '611' .
zsdtab1_itab-exit_light = 'X' .
when '613' .
zsdtab1_itab-headlamp = 'X' .
when '877' .
zsdtab1_itab-readlamp = 'X' .
when '808' .
zsdtab1_itab-code_ckd = 'X' .
when '708' .
zsdtab1_itab-del_prt_lc = 'X' .
when '593' .
zsdtab1_itab-ins_glass = 'X' .
when '955' .
zsdtab1_itab-zelcl = 'Elegance' .
when '593' .
zsdtab1_itab-zelcl = 'Classic' .
endcase .
endcase .
endloop .
*--Update the sales data .--
perform get_sales_order using mara_itab-matnr .
perform get_cartype using mara_itab-matnr .
append zsdtab1_itab .
endloop.
<<<
loop at zsdtab1_itab .
if zsdtab1_itab-cartype <> 'W-203'
or zsdtab1_itab-cartype <> 'W-210'
or zsdtab1_itab-cartype <> 'W-211'.
clear zsdtab1_itab-zelcl.
endif.
SELECT SINGLE * FROM ZSDTAB1 WHERE COMMNO = MARA_ITAB-MATNR .
select single * from zsdtab1 where commno = zsdtab1_itab-commno.
if sy-subrc <> 0 .
insert into zsdtab1 values zsdtab1_itab .
else .
update zsdtab1 set :vbeln = zsdtab1_itab-vbeln
bill_doc = zsdtab1_itab-bill_doc
dest = zsdtab1_itab-dest
lgort = zsdtab1_itab-lgort
ship_tp = zsdtab1_itab-ship_tp
country = zsdtab1_itab-country
kunnr = zsdtab1_itab-kunnr
vkbur = zsdtab1_itab-vkbur
customer = zsdtab1_itab-customer
city = zsdtab1_itab-city
region = zsdtab1_itab-region
model = zsdtab1_itab-model
drive = zsdtab1_itab-drive
converter = zsdtab1_itab-converter
transmssn = zsdtab1_itab-transmssn
colour = zsdtab1_itab-colour
ztrim = zsdtab1_itab-ztrim
commno = zsdtab1_itab-commno
trackstage = zsdtab1_itab-trackstage
chassis_no = zsdtab1_itab-chassis_no
engine_no = zsdtab1_itab-engine_no
body_no = zsdtab1_itab-body_no
cockpit = zsdtab1_itab-cockpit
airbag = zsdtab1_itab-airbag
trailer_no = zsdtab1_itab-trailer_no
fininspdat = zsdtab1_itab-fininspdat
entrydate = zsdtab1_itab-entrydate
regist_no = zsdtab1_itab-regist_no
mech_key = zsdtab1_itab-mech_key
side_ab_rt = zsdtab1_itab-side_ab_rt
side_ab_lt = zsdtab1_itab-side_ab_lt
elect_key = zsdtab1_itab-elect_key
head_lamp = zsdtab1_itab-head_lamp
tail_lamp = zsdtab1_itab-tail_lamp
vac_pump = zsdtab1_itab-vac_pump
sd_ab_sn_l = zsdtab1_itab-sd_ab_sn_l
sd_ab_sn_r = zsdtab1_itab-sd_ab_sn_r
asrhydunit = zsdtab1_itab-asrhydunit
gearboxno = zsdtab1_itab-gearboxno
battery = zsdtab1_itab-battery
tyretype = zsdtab1_itab-tyretype
tyremake = zsdtab1_itab-tyremake
tyresize = zsdtab1_itab-tyresize
rr_axle_no = zsdtab1_itab-rr_axle_no
ff_axl_nor = zsdtab1_itab-ff_axl_nor
ff_axl_nol = zsdtab1_itab-ff_axl_nol
drivairbag = zsdtab1_itab-drivairbag
st_box_no = zsdtab1_itab-st_box_no
transport = zsdtab1_itab-transport
OPTIONS-
roll_blind = zsdtab1_itab-roll_blind
ground_clr = zsdtab1_itab-ground_clr
anti_theft = zsdtab1_itab-anti_theft
anti_tow = zsdtab1_itab-anti_tow
alloy_whel = zsdtab1_itab-alloy_whel
del_class = zsdtab1_itab-del_class
str_wheel = zsdtab1_itab-str_wheel
cd_changer = zsdtab1_itab-cd_changer
manual_eng = zsdtab1_itab-manual_eng
conn_handy = zsdtab1_itab-conn_handy
aircleaner = zsdtab1_itab-aircleaner
metal_sump = zsdtab1_itab-metal_sump
speaker = zsdtab1_itab-speaker
arm_rest = zsdtab1_itab-arm_rest
aircond = zsdtab1_itab-aircond
exit_light = zsdtab1_itab-exit_light
headlamp = zsdtab1_itab-headlamp
readlamp = zsdtab1_itab-readlamp
code_ckd = zsdtab1_itab-code_ckd
del_prt_lc = zsdtab1_itab-del_prt_lc
ins_glass = zsdtab1_itab-ins_glass
dat_trk_1 = zsdtab1_itab-dat_trk_1
dat_trk_5 = zsdtab1_itab-dat_trk_5
dat_trk_10 = zsdtab1_itab-dat_trk_10
dat_trk_15 = zsdtab1_itab-dat_trk_15
dat_trk_20 = zsdtab1_itab-dat_trk_20
dat_trk_25 = zsdtab1_itab-dat_trk_25
dat_trk_30 = zsdtab1_itab-dat_trk_30
dat_trk_35 = zsdtab1_itab-dat_trk_35
dat_trk_40 = zsdtab1_itab-dat_trk_40
dat_trk_45 = zsdtab1_itab-dat_trk_45
dat_trk_50 = zsdtab1_itab-dat_trk_50
dat_trk_55 = zsdtab1_itab-dat_trk_55
dat_trk_60 = zsdtab1_itab-dat_trk_60
dat_trk_65 = zsdtab1_itab-dat_trk_65
dat_trk_70 = zsdtab1_itab-dat_trk_70
dat_trk_75 = zsdtab1_itab-dat_trk_75
dat_trk_78 = zsdtab1_itab-dat_trk_78
dat_trk_79 = zsdtab1_itab-dat_trk_79
dat_trk_80 = zsdtab1_itab-dat_trk_80
dat_trk_85 = zsdtab1_itab-dat_trk_85
dat_trk_90 = zsdtab1_itab-dat_trk_90
dat_trk_95 = zsdtab1_itab-dat_trk_95
dattrk_100 = zsdtab1_itab-dattrk_100
dattrk_105 = zsdtab1_itab-dattrk_105
dattrk_110 = zsdtab1_itab-dattrk_110
dattrk_115 = zsdtab1_itab-dattrk_115
dattrk_120 = zsdtab1_itab-dattrk_120
pdt_tk_1 = zsdtab1_itab-pdt_tk_1
pdt_tk_5 = zsdtab1_itab-pdt_tk_5
pdt_tk_10 = zsdtab1_itab-pdt_tk_10
pdt_tk_15 = zsdtab1_itab-pdt_tk_15
pdt_tk_20 = zsdtab1_itab-pdt_tk_20
pdt_tk_25 = zsdtab1_itab-pdt_tk_25
pdt_tk_30 = zsdtab1_itab-pdt_tk_30
pdt_tk_35 = zsdtab1_itab-pdt_tk_35
pdt_tk_40 = zsdtab1_itab-pdt_tk_40
pdt_tk_45 = zsdtab1_itab-pdt_tk_45
pdt_tk_50 = zsdtab1_itab-pdt_tk_50
pdt_tk_55 = zsdtab1_itab-pdt_tk_55
pdt_tk_60 = zsdtab1_itab-pdt_tk_60
pdt_tk_65 = zsdtab1_itab-pdt_tk_65
pdt_tk_70 = zsdtab1_itab-pdt_tk_70
pdt_tk_75 = zsdtab1_itab-pdt_tk_75
pdt_tk_78 = zsdtab1_itab-pdt_tk_78
pdt_tk_79 = zsdtab1_itab-pdt_tk_79
pdt_tk_80 = zsdtab1_itab-pdt_tk_80
pdt_tk_85 = zsdtab1_itab-pdt_tk_85
pdt_tk_90 = zsdtab1_itab-pdt_tk_90
pdt_tk_95 = zsdtab1_itab-pdt_tk_95
pdt_tk_100 = zsdtab1_itab-pdt_tk_100
pdt_tk_105 = zsdtab1_itab-pdt_tk_105
pdt_tk_110 = zsdtab1_itab-pdt_tk_110
pdt_tk_115 = zsdtab1_itab-pdt_tk_115
pdt_tk_120 = zsdtab1_itab-pdt_tk_120
cartype = zsdtab1_itab-cartype
zelcl = zsdtab1_itab-zelcl
excise_no = zsdtab1_itab-excise_no
where commno = zsdtab1_itab-commno .
Update table .---------<<<
endif .
endloop .
perform update_excise_date .
perform update_post_goods_issue_date .
perform update_time.
*///////////////////// end of programe /////////////////////////////////
Get sales data -
form get_sales_order using matnr .
data : corr_vbeln like vbrk-vbeln .
ADDED BY ADITYA / 22.06.98 **************************************
perform get_order using matnr .
select single vbeln lgort into (zsdtab1_itab-vbeln , zsdtab1_itab-lgort)
from vbap where matnr = matnr . " C-22.06.98
from vbap where vbeln = zsdtab1_itab-vbeln .
if sy-subrc = 0 .
************Get the Excise No from Allocation Field*******************
select single * from zsdtab1 where commno = matnr .
if zsdtab1-excise_no = '' .
select * from vbrp where matnr = matnr .
select single vbeln into corr_vbeln from vbrk where
vbeln = vbrp-vbeln and vbtyp = 'M'.
if sy-subrc eq 0.
select single * from vbrk where vbtyp = 'N'
and sfakn = corr_vbeln. "cancelled doc.
if sy-subrc ne 0.
select single * from vbrk where vbeln = corr_vbeln.
if sy-subrc eq 0.
data : year(4) .
move sy-datum+0(4) to year .
select single * from bkpf where awtyp = 'VBRK' and awkey = vbrk-vbeln
and bukrs = 'MBIL' and gjahr = year .
if sy-subrc = 0 .
select single * from bseg where bukrs = 'MBIL' and belnr = bkpf-belnr
and gjahr = year and koart = 'D' and
shkzg = 'S' .
zsdtab1_itab-excise_no = bseg-zuonr .
endif .
endif.
endif.
endif.
endselect.
endif .
select single kunnr vkbur into (zsdtab1_itab-kunnr ,
zsdtab1_itab-vkbur) from vbak
where vbeln = zsdtab1_itab-vbeln .
if sy-subrc = 0 .
select single name1 ort01 regio into (zsdtab1_itab-customer ,
zsdtab1_itab-city , zsdtab1_itab-region) from kna1
where kunnr = zsdtab1_itab-kunnr .
endif.
Get Ship to Party **************************************************
select single * from vbpa where vbeln = zsdtab1_itab-vbeln and
parvw = 'WE' .
if sy-subrc = 0 .
zsdtab1_itab-ship_tp = vbpa-kunnr .
Get Destination Country of Ship to Party .************
select single * from kna1 where kunnr = vbpa-kunnr .
if sy-subrc = 0 .
select single * from t005t where land1 = kna1-land1
and spras = 'E' .
if sy-subrc = 0 .
zsdtab1_itab-country = t005t-landx .
endif .
endif .
endif .
endif .
endform. " GET_SALES
form update_time.
update zstatus set zupddate = sy-datum
uzeit = sy-uzeit
where programm = 'ZSDDET01' .
endform. " UPDATE_TIME
*& Form DATE_CONVERT
form date_convert using atflv changing date .
data : dt(8) , dat type i .
dat = atflv .
dt = dat .
date = dt .
endform. " DATE_CONVERT
*& Form UPDATE_POST_GOODS_ISSUE_DATE
form update_post_goods_issue_date .
types : begin of itab1_type ,
mblnr like mseg-mblnr ,
budat like mkpf-budat ,
end of itab1_type .
data : itab1 type itab1_type occurs 10 with header line .
loop at mara_itab .
select single * from zsdtab1 where commno = mara_itab-matnr .
if sy-subrc = 0 and zsdtab1-postdate = '00000000' .
refresh itab1 . clear itab1 .
select * from mseg where matnr = mara_itab-matnr and bwart = '601' .
itab1-mblnr = mseg-mblnr .
append itab1 .
endselect .
loop at itab1 .
select single * from mkpf where mblnr = itab1-mblnr .
if sy-subrc = 0 .
itab1-budat = mkpf-budat .
modify itab1 .
endif .
endloop .
sort itab1 by budat .
read table itab1 index 1 .
if sy-subrc = 0 .
update zsdtab1 set postdate = itab1-budat
where commno = mara_itab-matnr .
endif .
endif .
endloop .
endform. " UPDATE_POST_GOODS_ISSUE_DATE
*& Form UPDATE_EXCISE_DATE
form update_excise_date.
types : begin of itab2_type ,
mblnr like mseg-mblnr ,
budat like mkpf-budat ,
end of itab2_type .
data : itab2 type itab2_type occurs 10 with header line .
loop at mara_itab .
select single * from zsdtab1 where commno = mara_itab-matnr .
if sy-subrc = 0 and zsdtab1-excise_dat = '00000000' .
refresh itab2 . clear itab2 .
select * from mseg where matnr = mara_itab-matnr and
( bwart = '601' or bwart = '311' ) .
itab2-mblnr = mseg-mblnr .
append itab2 .
endselect .
loop at itab2 .
select single * from mkpf where mblnr = itab2-mblnr .
if sy-subrc = 0 .
itab2-budat = mkpf-budat .
modify itab2 .
endif .
endloop .
sort itab2 by budat .
read table itab2 index 1 .
if sy-subrc = 0 .
update zsdtab1 set excise_dat = itab2-budat
where commno = mara_itab-matnr .
endif .
endif .
endloop .
endform. " UPDATE_EXCISE_DATE
form get_order using matnr .
types : begin of itab_type ,
vbeln like vbap-vbeln ,
posnr like vbap-posnr ,
end of itab_type .
data : itab type itab_type occurs 10 with header line .
refresh itab . clear itab .
select * from vbap where matnr = mara_itab-matnr .
itab-vbeln = vbap-vbeln .
itab-posnr = vbap-posnr .
append itab .
endselect .
loop at itab .
select single * from vbak where vbeln = itab-vbeln .
if vbak-vbtyp <> 'C' .
delete itab .
endif .
endloop .
loop at itab .
select single * from vbfa where vbelv = itab-vbeln and
posnv = itab-posnr and vbtyp_n = 'H' .
if sy-subrc = 0 .
delete itab .
endif .
endloop .
clear : zsdtab1_itab-vbeln , zsdtab1_itab-bill_doc .
loop at itab .
zsdtab1_itab-vbeln = itab-vbeln .
select single * from vbfa where vbelv = itab-vbeln and
posnv = itab-posnr and vbtyp_n = 'M' .
if sy-subrc = 0 .
zsdtab1_itab-bill_doc = vbfa-vbeln .
endif .
endloop .
endform .
*& Form GET_CARTYPE
form get_cartype using matnr .
select single * from mara where matnr = matnr .
zsdtab1_itab-cartype = mara-satnr .
endform. " GET_CARTYPEHi,
I have analysed your program and i would like to share following points for better performance of this report :
(a) Use the field Names instead of Select * or Select Single * as if you use the field names it will consume less amount of resources inside the loop as well as you have lot many Select Single * and u r using very big tables like VBAP and many more.
(b) Trace on ST05 which particular query is mostly effecting your system or use ST12 in current mode to trace for less inputs which run the report for 20-30 min so that we get an idea which queries are effecting the system and taking a lot of time.
(c) In Case of internal tables sort the data properly and use binary search for getting the data.
I think this will help.
Thanks and Regards,
Harsh -
Report painter performance problem...
I have a client which runs a report group consists of 14 reports... When we run this program... It takes about 20 minutes to get results... I was assigned to optimize this report...
This is what I've done so far
(this is a SAP generated program)...
1. I've checked the tables that the program are using... (a customized table with more than 20,000 entries and many others)
2. I've created secondary indexes to the main customized table with (20,000) entries - It improves the performance a bit(results about 18 minutes)...
3. I divided the report group by 4... 3 reports each report group... It greatly improves the performance... (but this is not what the client wants)...
4. I've read an article about report group performance that it is a bug.
(sap support recognized the fact that we are dealing with a bug in the sap standard functionality)
http://it.toolbox.com/blogs/sap-on-db2/sap-report-painter-performance-problem-26000
Anyone have the same problem as mine?
Edited by: christopher mancuyas on Sep 8, 2008 9:32 AM
Edited by: christopher mancuyas on Sep 9, 2008 5:39 AMReport painter/Writer always creates a prerformance issue.i never preffred them since i have a option with Zreport
now you can do only one thing put more checks on selection-screen for filtering the data.i think thats the only way.
Amit.
Maybe you are looking for
-
Adobe LiveCycle Designer Samples - problem
Hello, i've just downloaded the DataImportExport.zip from http://partners.adobe.com/public/developer/livecycle/designer/index_samples.html and i have one question. Why i am unable to run first example: "Export Data: User to specify the file name" ? D
-
Automatic realeased credit block
Hi Friends, my client requirement is automatic credit block released when ever the customer pay the money. he dont want to released manually, please help me , its a critical issue for me, please give me suggestions thanks durga
-
Basically ive got the latest firmware, my Ipod plays the two seconds at the start of any song. The thing then freezes for about 4 seconds! The ipod photo then continues to play the song quite happily?! It seems to do it every time i use it. Is it due
-
Some problems about QuickTime 7
Hi,can QuickTime support video files encoded by H.263 or H.263+? Can it read *.avi files? I tried in the Windows XP but failed... Need I purchase the serial key and update the QT 7 to the Pro Version? Thanks.
-
How do I view .tiff files in Safari?
I read in an older post how to tick off a .tiff file view but I can't find those settings in my new MacBook Air, can someone help me, thanks