Table temp_bed_cess does not fit in to wondow vf02
Hi,
no print preview for a particular billing document number in VF02. but for the remaining billing documents the print preview is displaying. when clicked on ' issue output to ' screen is returned to the same screeen. This is a production server issue.
the error is template does not fit into window
Dear Sir,
Thank you for all your replies,
the window with same name is attached in two pages and thier dimensions are different.
the window & template dimensions are as:
window first page
height 2.90 cm
width 12 cm
regarding template
c1 from 1 to 1 1 LN 9 cm 3 cm
c2 from 2 to 2 0.96 LN 12 cm
window second page
height 2 cm
width 12 cm
regarding template
c1 from 1 to 1 1 ln 9 cm 3 cm
c2 from 2 to 2 0.96 ln 12 cm
here the window height is more than the template total cells height, but why it is showing template does not fix in to the window.where as for other billing document , it is working fine, only for 6111108680.
please help me.
thanks & regards,
Dastagir
Similar Messages
-
Error: Table TEMPLATE_HEADER does not fit into window.
Hello Experts ,
I met a very strange problem.
I am printing a process order using smartform.
for other process nrs , print perfect.
But only for a certain precess nr, I got a popup error 'Table TEMPLATE_HEADER does not fit into window.'
At beginning , I suppose my table line extend the mainwindow width. But infact , no!
I try to comment every node one by one, I found the reason: I put a table line into a loop node, if I add a text node which has something inside, it will triger this error. (only for this process order, others works fine)
so , does someone met this error before ?
Please help me!!
Regards
KevinHi Kevin,
Which printer and device type do you use? For line printers and device type(driver STN2) like e.g. EPESCP9, the SAP system
must use spaces and empty lines to place the text. This is a limitation of the ESC/P printer languagesa per SAP note #19807.
For this, the Smartforms rounds all coordinates(of the table cells and the window). Only after this step it checks, whether the table fits into the window. So if the table size is quite close to the window size size, it may happen on line printers that the table doesn't fit anymore.
If this is the reason for your problem, the error message should vanish if you increase the size of the window containing table TEMPLATE_HEADER a little in your smartform.
Regards,
Aidan -
Getting "Table %TEMPLATE does not fit into window" error
Hello,
I am trying to print a form to an old EPSON DFX-9000 dot matrix printer and am getting the error message Table %TEMPLATE does not fit into window".
This only happens when I go to that printer. I can print fine to a laser printer.
I have tried creating a new device type and copying over the format from the laser printer, playing with the format, changing formats, ect.
I have adjusted the size of the window that my template cannot allegedly fit into but still no luck. I have checked the height and width of the template and the window many, many times and still get the same error.
Has anyone seen this before? Please help. Thanks.Hi James,
You need to see the width and height of the Page Format which you have set in Form Attributes of your smartforms.
What ever you create should be within this width and height .
So accordingly adjust the width and height of your windows and components within them
Regards,
Dep -
Table TEMPL_FW6 does not fit into window.
Hello All,
My smartform driver program is giving me this error. What could be the problem .can anyone help me out in this.Hii
this error u can get it in smartform itself
change the width of ur template & when u specifying the text check the line types
any of them ur missing
reward points if useful
regards
Jaipal -
SAP DSD - geocoding for customers - field format does not fit to examples
Hello to all,
We have a customer requirement behind this. We intend to use the DSD-Addon for several issues. One of these issues is to store geocoding information for our customer data within SAP. The SAP-Release is 4.7 with the DSD-Addon active. I checked all threads within the network and also checked SAP-Help and OSS-messages. Now our issue:
When I look at the fields for storing the geocode (Longitude and Latitude) they do not fit to the testdata I got from our customers. The data look like this:
customer: x-Coord y-Coord_
10001 744264,3384 6657823,32
10002 813368,6494 6699051,344
10003 790475,8379 6702787,298
10004 862729,1893 6690792,612
The fields in the DSD-Customerdata have the format "123.123456789012". So I wonder how my data could fit into these fields. Is there anybody who has experience with this? I did not find any information or examples in the SAP-Help for this. What is wrong the format of the fields or the format of the x/y-Coordinates?
Thanks in advance!
Best regards,
Gerlinde von Calle and Thomas Vomhof
Edited by: Thomas Vomhof on Oct 8, 2008 6:12 PMHi Srinivas ,
Let me confirm which version of SAP your using
As per your post -
1. Table total does not fit into window
Check your table is fit in the window or not (window will be main window)
2.Error occured while sending mail SO_OBJECT_SEND, return code L (message type: warning)
Check your parameters that passing to the SO_OBJECT_SEND
3.Page format with orientation unknown (message type: warning)
Check your styles that are using in the form
4.Form TOTALS has wrong page format (message type: error)
Chekc your page format that is going to to support printer what your using - check the printer settings.
I think your are using the u r own z page format
Let me know if any concerns... -
Table does not fit into window.
Hi Guys,
When I execute the Smartforms I get this message ? '
"Table does not fit into window." any guess why this message ?
Regards>
P R Raghu wrote:
> "Table does not fit into window." any guess why this message ?
> Regards
If TABLE does not fit WINDOW try to take it through the DOOR LOL
Doesn't the error seems self explanatory to you?
Regards
Karthik D -
Error: 'BP category 1 does not fit the data in category 2'
Hi,
i have written a program to create a contact person and the code for it is pasted below...when i run this program i get nothing but this message in the status bar 'BP category 1 does not fit the data in category 2'...can someone tell me wht the error means and y it is coming.
thanks:)
pushpa
*table for storing the line by line records in the excel file
TYPES: BEGIN OF TTAB,
REC(1000) TYPE C,
END OF TTAB.
DATA ITAB TYPE TABLE OF TTAB WITH HEADER LINE.
*variable for storing the name of the excel file to be uploaded
DATA UP_FILE TYPE STRING.
*data to be uploaded
TYPES: BEGIN OF TDAT,
FLD1 TYPE BAPIBUS1006_CENTRAL_ORGAN-NAME1,
FLD2 TYPE BAPIBUS1006_ADDRESS-STREET,
FLD3 TYPE BAPIBUS1006_ADDRESS-CITY,
FLD4 TYPE BAPIBUS1006_ADDRESS-REGION,
FLD5 TYPE BAPIBUS1006_ADDRESS-POSTL_COD1,
FLD6 TYPE BAPIBUS1006_ADDRESS-COUNTRY,
FLD7 TYPE BAPIBUS1006_CENTRAL-PARTNEREXTERNAL,
END OF TDAT.
DATA IDAT TYPE TABLE OF TDAT WITH HEADER LINE.
DATA: BUSINESSPARTNER TYPE BAPIBUS1006_HEAD-BPARTNER,
CENTRALDATA TYPE BAPIBUS1006_CENTRAL,
ORGANIZATION TYPE BAPIBUS1006_CENTRAL_ORGAN,
ADDRESS TYPE BAPIBUS1006_ADDRESS,
BAPIRETURN LIKE BAPIRET2 OCCURS 0 WITH HEADER LINE.
PARAMETERS P_FILE TYPE LOCALFILE.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE.
CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
EXPORTING
STATIC = 'X'
CHANGING
FILE_NAME = P_FILE.
START-OF-SELECTION.
UP_FILE = P_FILE.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
FILENAME = UP_FILE
TABLES
DATA_TAB = ITAB
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_READ_ERROR = 2
NO_BATCH = 3
GUI_REFUSE_FILETRANSFER = 4
INVALID_TYPE = 5
NO_AUTHORITY = 6
UNKNOWN_ERROR = 7
BAD_DATA_FORMAT = 8
HEADER_NOT_ALLOWED = 9
SEPARATOR_NOT_ALLOWED = 10
HEADER_TOO_LONG = 11
UNKNOWN_DP_ERROR = 12
ACCESS_DENIED = 13
DP_OUT_OF_MEMORY = 14
DISK_FULL = 15
DP_TIMEOUT = 16
OTHERS = 17.
*writing out the contents of the internal table itab
LOOP AT ITAB.
WRITE:/ ITAB-REC.
CLEAR IDAT.
SPLIT ITAB-REC AT CL_ABAP_CHAR_UTILITIES=>HORIZONTAL_TAB
INTO IDAT-FLD1 IDAT-FLD2 IDAT-FLD3 IDAT-FLD4 IDAT-FLD5 IDAT-FLD6 IDAT-FLD7.
APPEND IDAT.
ENDLOOP.
LOOP AT IDAT.
MOVE: IDAT-FLD1 TO ORGANIZATION-NAME1,
IDAT-FLD2 TO ADDRESS-STREET,
IDAT-FLD3 TO ADDRESS-CITY,
IDAT-FLD4 TO ADDRESS-REGION,
IDAT-FLD5 TO ADDRESS-POSTL_COD1,
IDAT-FLD6 TO ADDRESS-COUNTRY,
IDAT-FLD7 TO CENTRALDATA-PARTNEREXTERNAL,
'0001' TO CENTRALDATA-PARTNERTYPE.
CALL FUNCTION 'BAPI_BUPA_CREATE_FROM_DATA'
EXPORTING
PARTNERCATEGORY = '1'
CENTRALDATA = CENTRALDATA
CENTRALDATAORGANIZATION = ORGANIZATION
ADDRESSDATA = ADDRESS
IMPORTING
BUSINESSPARTNER = BUSINESSPARTNER
TABLES
RETURN = BAPIRETURN.
IF BAPIRETURN IS NOT INITIAL.
READ TABLE BAPIRETURN INDEX 1.
MESSAGE
ID BAPIRETURN-ID
TYPE BAPIRETURN-TYPE
NUMBER BAPIRETURN-NUMBER
WITH BAPIRETURN-MESSAGE_V1
BAPIRETURN-MESSAGE_V2
BAPIRETURN-MESSAGE_V3
BAPIRETURN-MESSAGE_V4.
EXIT.
ENDIF.
REFRESH BAPIRETURN.
CLEAR BAPIRETURN.
CALL FUNCTION 'BAPI_BUPA_ROLE_ADD'
EXPORTING
BUSINESSPARTNER = BUSINESSPARTNER
BUSINESSPARTNERROLE = 'BUP001'
DIFFERENTIATIONTYPEVALUE =
TABLES
RETURN = BAPIRETURN.
IF BAPIRETURN IS NOT INITIAL.
READ TABLE BAPIRETURN INDEX 1.
MESSAGE
ID BAPIRETURN-ID
TYPE BAPIRETURN-TYPE
NUMBER BAPIRETURN-NUMBER
WITH BAPIRETURN-MESSAGE_V1
BAPIRETURN-MESSAGE_V2
BAPIRETURN-MESSAGE_V3
BAPIRETURN-MESSAGE_V4.
EXIT.
ENDIF.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
WRITE:/ 'Business Partner ID:', BUSINESSPARTNER.
ENDLOOP.Hi Pushpa,
you can use following code to create relationships using BAPI. In this Business partner is organisatin. contact persion paramenter is person. other information related to relationship details
CALL FUNCTION 'BAPI_BUPR_CONTP_CREATE'
EXPORTING
BUSINESSPARTNER = SEARCH_PARTNER
CONTACTPERSON = CONTACT_SAP
VALIDFROMDATE = '00010101'
VALIDUNTILDATE = '99991231'
DEFAULTRELATIONSHIP =
ADDRESSGUID =
CENTRALDATA = WA_CENTRAL_DATA
ADDRESSDATA = WA_ADDR_DATA
TABLES
BAPIADTEL = I_TEL_DATA
BAPIADFAX = I_FAX_DATA
BAPIADTTX =
BAPIADTLX =
BAPIADSMTP = I_EMAIL_DATA
BAPIADRML =
BAPIADX400 =
BAPIADRFC =
BAPIADPRT =
BAPIADSSF =
BAPIADURI =
BAPIADPAG =
BAPIAD_REM =
BAPICOMREM =
RETURN = I_RETURN
hope this will help you
Siva -
Hi all,
I'm creating a smartform which prints one internal table consists of 36 fields. In table line type i have mentioned the 36 fields. First four are of 4CM and other 32 fields of 2CM width. So in total i have mentioned as 80 CM.
But its showing an error like 'Main window does not fit into Page'.
What could be the mistake?
Can anyone help me in this..
Regards,
ShanthiHi,
U have to adjust the 36 fields into 21 cm by Allocating Space accordingly.
if Your Space is small then data will be displayed in the next line.
And display The data in Smallest font possible.
Regards
sandipan -
"BP Category 1 does not fit the data in category 2" "Replies Appreciated"
Hi Gurus,
When i am trying to create an "Individual Account" in UI, I am getting the error "BP Category 1 does not fit the data in category 2".
If i try to create a "group" then it says "BP Category 3 does not fit the data in category 2".
It allows me to create only "Corporate Account" i..e. Category 2.
What should i do to create "Individual Account" and "Group". (Category1 & Category 3).
Individual Account (Category 1) - "BP Category 1 does not fit the data in category 2".
Corporate Account (Category 2) - Able to create only Corporate Account
Group (Category 3) - "BP Category 3 does not fit the data in category 2".
Thanks & Regards
RohanHi Rohan,
Hope this SAP Note : 1232459, Solves your problem.
You might have created a custom configuration for corporate accounts.
Unfortunately in case of custom configurations exist, they are selected with higher priority.
So in this case the configuration for corporate accounts is also shown for individual accounts,
this causes error.
In order to solve this problem, create a custom configuration for individual account also,
i.e for view BP_HEAD/AccountDetails. Object type BP_ACCOUNT and object subtype INDIVIDUAL.
Please make sure that the custom configuration includes the fields firstname and lastname for
persons instead of name1 and name2 which are only allowed for corporate accounts.
I hope the above information resolves your problem.
Best Regards
Shiven -
CRM 2007 IC : error "BP category 2 does not fit the data in category 1"
Hi Guys,
When I am trying to save the data on the Bupacreate page it gives the error as follows.
"BP category 2 does not fit the data in category 1".
Can anyone suggest what is causing this error to happen and how this error can be corrected.
thanks & regards
SandyHi,
This error usually occrus when you try to set field in without specifing bptype ie person, group etc. In our scenario we were trying to set field in Person which was not present in group. but since do_prepare_output method is same in both, that feild was getting set for group as well. When we placed restriction this error got removed.
Best regards
Pankaj Kumar -
I have a Macbook, 13" screen, purchased in 2007. I want to hook it up to my HDTV; I purchased a mini display port to hdmi adapter but it does not fit. Any suggestions?
If you connect yourMacBook using a MiniDVI/HDMI adapter you will need to use external speakers for audio since the pre-2010 MacBooks will only send video through the MiniDVI or MiniDisplay Port . The MiniDVI/HDMI doesn't carry audio and there's no audio plugs on the TV to work with HDMI since it's expecting audio with the HDMI.
If your TV has a DVI input plug you can use a MiniDisplayPort/DVI adapter. Then a DVI cable to the DVI input plug on the TV. The TV will have RCA audio plugs for use with the DVI. Plus DVI gives a sharper image than HDMI. -
Result set does not fit; it contains too many rows
Dear All,
We are in BI7 and running reports on Excel 2007. Even though number of rows limitation in Excel 2007 is more than 1Million, when I try to execute a report with more than 65k records of output, system is generating output only for 65k rows with message "Result set does not fit; it contains too many rows".
Our Patch levels:
GUI - 7.10
Patch level is 11
Is there any way to generate more than 65000 rows in Bex?
Thanks in advance...
regards,
Raju
Dear Gurus,
Could you please shed some light on this issue?
thanks and regards,
Raju
Edited by: VaraPrasadraju Potturi on Apr 14, 2009 3:13 AMVara Prasad,
This has been discussed on the forums - for reasons of backward compatibility I do not think BEx supports more that 65000 rows .... I am still not sure about the same since I have not tried out a query with more that 65K rows on excel 2007 but I think this is not possible... -
Hi All,
We are encountering numerous short dumps in our system caused by Table AUSPN_V1 does not exist in the database with ID R/3.
Can anyone advise how to solve the issue? Please find below portion of the short dumps.
Category ABAP Programming Error
Runtime Errors DBIF_RSQL_TABLE_UNKNOWN
ABAP Program SAPLCLVF
Application Component CA-CL-CL
Date and Time 11.06.2014 12:08:28
Short text
A table is unknown or does not exist.
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLCLVF" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
A table is referred to in an SAP Open SQL statement that either does not
exist or is unknown to the ABAP Data Dictionary.
The table involved is "AUSPN_V1" or another table accessed in the statement.
Source Code Extract
Line SourceCde
104 if dupl = kreuz.
105 insert auspc_v2 client specified from table auspcv2
106 accepting duplicate keys.
107 else.
108 insert auspc_v2 client specified from table auspcv2.
109 if syst-subrc ne 0.
110 message a585 with tabausp.
111 endif.
112 endif.
113 refresh auspcv2.
114 endif.
115 read table auspcv3 index 1.
116 if syst-subrc = 0.
117 if dupl = kreuz.
118 insert auspc_v3 client specified from table auspcv3
119 accepting duplicate keys.
120 else.
121 insert auspc_v3 client specified from table auspcv3.
122 if syst-subrc ne 0.
123 message a585 with tabausp.
124 endif.
125 endif.
126 refresh auspcv3.
127 endif.
128 read table auspnv1 index 1.
129 if syst-subrc = 0.
130 if dupl = kreuz.
131 insert auspn_v1 client specified from table auspnv1
132 accepting duplicate keys.
133 else.
>>>>> insert auspn_v1 client specified from table auspnv1.
135 if syst-subrc ne 0.
136 message a585 with tabausp.
137 endif.
138 endif.
139 refresh auspnv1.
140 endif.
141 read table auspnv2 index 1.
142 if syst-subrc = 0.
143 if dupl = kreuz.
144 insert auspn_v2 client specified from table auspnv2
145 accepting duplicate keys.
146 else.
147 insert auspn_v2 client specified from table auspnv2.
148 if syst-subrc ne 0.
149 message a585 with tabausp.
150 endif.
151 endif.
152 refresh auspnv2.
153 endif.Hello
Please check on transaction SE11 if this table exists and if it is active.
Also, it may be a database issue. What is your database?
BR
Caetano -
Table TTZDF does not exist on database
HI forum
i am installing the last SAPIDES Ehp3 Linux / Maxdb during the process of installation all job were imported sucessfully 32 of 50 , in the phase CHECK DDIC PASSWORD, the system can´t do log in.
Review the log in the work directory (dev_w0) the follow message is generated.
A Sat Jun 12 21:19:56 2010
A **GENER Trace switched off ***
B dbmyclu : info : my major identification is 3231713892, minor one 0.
B dbmyclu : info : Time Reference is 1.12.2001 00:00:00h GMT.
B dbmyclu : info : my initial uuid is CF0B144C2E40F845E1000000C0A00A64.
B dbmyclu : info : current optimistic cluster level: 2
B dbmyclu : info : pessimistic reads set to 2.
C
C Sat Jun 12 21:20:15 2010
C *** ERROR => prepare() of C_0063, rc=1, rcSQL=-942 (POS(95) Unknown table name:TTZDF)
C *** ERROR => SQL PREPARE on connection 0, rc=-942 (POS(95) Unknown table name:TTZDF)
C sc_p=0x2b4da28435b8,no=63,idc_p=(nil),con=0,act=0,slen=190,smax=256,#vars=1,stmt=0x19449e10,table=TTZDF
C SELECT "CLIENT" , "DSTRULE" , "YEARACT" , "DATEFROM" , "TIMEFROM" , "DATETO" , "TIMETO" FROM "TTZDF"
C WHERE "CLIENT" = ? ORDER BY "CLIENT" , "DSTRULE" , "YEARACT" WITH LOCK ISOLATION LEVEL 1;
B ***LOG BZA=> table TTZDF does not exist on database R/3
B *** ERROR => Buffer loading failed: {fcode=293, rc=32, cnt=0, table='TTZDF'}
C *** ERROR => prepare() of C_0063, rc=1, rcSQL=-942 (POS(114) Unknown table name:TTZDF)
C *** ERROR => SQL PREPARE on connection 0, rc=-942 (POS(114) Unknown table name:TTZDF)
C sc_p=0x2b4da28435b8,no=63,idc_p=0x2b4da2909220,con=0,act=0,slen=199,smax=256,#vars=2,stmt=0x19449e10,table=TTZDF
C SELECT /*+ KEYACCESS */ "CLIENT" , "DSTRULE" , "YEARACT" , "DATEFROM" , "TIMEFROM" , "DATETO" , "T
C IMETO" FROM "TTZDF" WHERE "CLIENT" = ? AND "DSTRULE" = ? ORDER BY "CLIENT" , "DSTRULE" , "YEARACT" ;
B ***LOG BZA=> table TTZDF does not exist on database
B *** ERROR => missing return code handler
abtstmp#?[613] does not handle return code 2 from dbcrtab#10[1764]
==> calling sap_dext to abort transaction
C
C Sat Jun 12 21:20:26 2010
C *** ERROR => prepare() of C_0065, rc=1, rcSQL=-942 (POS(95) Unknown table name:TTZDF)
C *** ERROR => SQL PREPARE on connection 0, rc=-942 (POS(95) Unknown table name:TTZDF)
C sc_p=0x2b4da28436e8,no=65,idc_p=(nil),con=0,act=0,slen=190,smax=256,#vars=1,stmt=0x1944e480,table=TTZDF
C SELECT "CLIENT" , "DSTRULE" , "YEARACT" , "DATEFROM" , "TIMEFROM" , "DATETO" , "TIMETO" FROM "TTZDF"
C WHERE "CLIENT" = ? ORDER BY "CLIENT" , "DSTRULE" , "YEARACT" WITH LOCK ISOLATION LEVEL 1;
B ***LOG BZA=> table TTZDF does not exist on database R/3
B *** ERROR => Buffer loading failed: {fcode=293, rc=32, cnt=0, table='TTZDF'}
C *** ERROR => prepare() of C_0065, rc=1, rcSQL=-942 (POS(114) Unknown table name:TTZDF)
C *** ERROR => SQL PREPARE on connection 0, rc=-942 (POS(114) Unknown table name:TTZDF)
C sc_p=0x2b4da28436e8,no=65,idc_p=0x2b4da2909350,con=0,act=0,slen=199,smax=256,#vars=2,stmt=0x1944e480,table=TTZDF
C SELECT /*+ KEYACCESS */ "CLIENT" , "DSTRULE" , "YEARACT" , "DATEFROM" , "TIMEFROM" , "DATETO" , "T
C IMETO" FROM "TTZDF" WHERE "CLIENT" = ? AND "DSTRULE" = ? ORDER BY "CLIENT" , "DSTRULE" , "YEARACT" ;
B ***LOG BZA=> table TTZDF does not exist on database
B *** ERROR => missing return code handler
abtstmp#?[613] does not handle return code 2 from dbcrtab#10[1764]
==> calling sap_dext to abort transaction
C
C Sat Jun 12 21:20:28 2010
C *** ERROR => prepare() of C_0065, rc=1, rcSQL=-942 (POS(114) Unknown table name:TTZDF)
C *** ERROR => SQL PREPARE on connection 0, rc=-942 (POS(114) Unknown table name:TTZDF)
C sc_p=0x2b4da28436e8,no=65,idc_p=0x2b4da2909350,con=0,act=0,slen=199,smax=256,#vars=2,stmt=0x1944e480,table=TTZDF
C SELECT /*+ KEYACCESS */ "CLIENT" , "DSTRULE" , "YEARACT" , "DATEFROM" , "TIMEFROM" , "DATETO" , "T
C IMETO" FROM "TTZDF" WHERE "CLIENT" = ? AND "DSTRULE" = ? ORDER BY "CLIENT" , "DSTRULE" , "YEARACT" ;
B ***LOG BZA=> table TTZDF does not exist on database
B *** ERROR => missing return code handler
abtstmp#?[613] does not handle return code 2 from dbcrtab#10[1764]
==> calling sap_dext to abort transaction
C
C Sat Jun 12 21:20:30 2010
C *** ERROR => prepare() of C_0065, rc=1, rcSQL=-942 (POS(114) Unknown table name:TTZDF)
C *** ERROR => SQL PREPARE on connection 0, rc=-942 (POS(114) Unknown table name:TTZDF)
C sc_p=0x2b4da28436e8,no=65,idc_p=0x2b4da2909350,con=0,act=0,slen=199,smax=256,#vars=2,stmt=0x1944e480,table=TTZDF
C SELECT /*+ KEYACCESS */ "CLIENT" , "DSTRULE" , "YEARACT" , "DATEFROM" , "TIMEFROM" , "DATETO" , "T
C IMETO" FROM "TTZDF" WHERE "CLIENT" = ? AND "DSTRULE" = ? ORDER BY "CLIENT" , "DSTRULE" , "YEARACT" ;
B ***LOG BZA=> table TTZDF does not exist on database
B *** ERROR => missing return code handler
abtstmp#?[613] does not handle return code 2 from dbcrtab#10[1764]
==> calling sap_dext to abort transaction
C
C Sat Jun 12 21:20:31 2010
C *** ERROR => prepare() of C_0065, rc=1, rcSQL=-942 (POS(114) Unknown table name:TTZDF)
C *** ERROR => SQL PREPARE on connection 0, rc=-942 (POS(114) Unknown table name:TTZDF)
C sc_p=0x2b4da28436e8,no=65,idc_p=0x2b4da2909350,con=0,act=0,slen=199,smax=256,#vars=2,stmt=0x1944e480,table=TTZDF
C SELECT /*+ KEYACCESS */ "CLIENT" , "DSTRULE" , "YEARACT" , "DATEFROM" , "TIMEFROM" , "DATETO" , "T
C IMETO" FROM "TTZDF" WHERE "CLIENT" = ? AND "DSTRULE" = ? ORDER BY "CLIENT" , "DSTRULE" , "YEARACT" ;
B ***LOG BZA=> table TTZDF does not exist on database
B *** ERROR => missing return code handler
abtstmp#?[613] does not handle return code 2 from dbcrtab#10[1764]
==> calling sap_dext to abort transaction
C
C Sat Jun 12 21:21:18 2010
C *** ERROR => prepare() of C_0065, rc=1, rcSQL=-942 (POS(114) Unknown table name:TTZDF)
C *** ERROR => SQL PREPARE on connection 0, rc=-942 (POS(114) Unknown table name:TTZDF)
C sc_p=0x2b4da28436e8,no=65,idc_p=0x2b4da2909350,con=0,act=0,slen=199,smax=256,#vars=2,stmt=0x1944e480,table=TTZDF
C SELECT /*+ KEYACCESS */ "CLIENT" , "DSTRULE" , "YEARACT" , "DATEFROM" , "TIMEFROM" , "DATETO" , "T
C IMETO" FROM "TTZDF" WHERE "CLIENT" = ? AND "DSTRULE" = ? ORDER BY "CLIENT" , "DSTRULE" , "YEARACT" ;
B ***LOG BZA=> table TTZDF does not exist on database
B *** ERROR => missing return code handler
abtstmp#?[613] does not handle return code 2 from dbcrtab#10[1764]
==> calling sap_dext to abort transaction
C
C Sat Jun 12 21:21:21 2010
C *** ERROR => prepare() of C_0065, rc=1, rcSQL=-942 (POS(114) Unknown table name:TTZDF)
C *** ERROR => SQL PREPARE on connection 0, rc=-942 (POS(114) Unknown table name:TTZDF)
C sc_p=0x2b4da28436e8,no=65,idc_p=0x2b4da2909350,con=0,act=0,slen=199,smax=256,#vars=2,stmt=0x1944e480,table=TTZDF
C SELECT /*+ KEYACCESS */ "CLIENT" , "DSTRULE" , "YEARACT" , "DATEFROM" , "TIMEFROM" , "DATETO" , "T
C IMETO" FROM "TTZDF" WHERE "CLIENT" = ? AND "DSTRULE" = ? ORDER BY "CLIENT" , "DSTRULE" , "YEARACT" ;
B ***LOG BZA=> table TTZDF does not exist on database
B *** ERROR => missing return code handler
abtstmp#?[613] does not handle return code 2 from dbcrtab#10[1764]
==> calling sap_dext to abort transaction
C
C Sat Jun 12 21:21:29 2010
C *** ERROR => prepare() of C_0066, rc=1, rcSQL=-942 (POS(114) Unknown table name:TTZDF)
C *** ERROR => SQL PREPARE on connection 0, rc=-942 (POS(114) Unknown table name:TTZDF)
C sc_p=0x2b4da2843780,no=66,idc_p=0x2b4da29093e8,con=0,act=0,slen=199,smax=256,#vars=2,stmt=0x194421a0,table=TTZDF
C SELECT /*+ KEYACCESS */ "CLIENT" , "DSTRULE" , "YEARACT" , "DATEFROM" , "TIMEFROM" , "DATETO" , "T
C IMETO" FROM "TTZDF" WHERE "CLIENT" = ? AND "DSTRULE" = ? ORDER BY "CLIENT" , "DSTRULE" , "YEARACT" ;
B ***LOG BZA=> table TTZDF does not exist on database
B *** ERROR => missing return code handler
abtstmp#?[613] does not handle return code 2 from dbcrtab#10[1764]
==> calling sap_dext to abort transaction
M ***LOG R47=> ThResFree, delete (001024) .
I search notes and in sdn forum any information about this error, but there isn´t information.
How i can solve this inconsistence durant the installation for finish the SAP IDES installation.
Hi forums
cheking the process of the installation, the problem i wait have it solve doing the reinstallation with any adjust in the database release .. i will be comment the process to the solution.
Jairothie process was solved with a new installation-
-
Table Z does not exist in the database
Hi,
I have created a Z table and modified the DataType from NUMC to DEC and transported to Quality server
and it is giving an information error that (Table Z does not exist in the database) then once again
i modified the DataType from DEC to NUMC and transported to Quality server then still it is giving an information error that
(Table Z does not exist in the database) please help me out in this issue.
Thanks in advance.Hi Jayanthumer,
Have you Activated (Ctrl + F3) the Table in SE11 before transporting to Quality server ?
Try to activate (Ctrl + F3) the table in SE11 of your Quality server...
It may not be imported properly into Quality server...
Ask to BASIS person about errors/warnings while importing to Quality Server..
Also activate all dataelement and domains.... make sure all things are active...
Once you activate it then it will create the table in database... till then there will be no table in database...
Hope it will solve your problem..
Thanks & Regards
ilesh 24x7
ilesh Nandaniya
Maybe you are looking for
-
Exchange Profile not working in EP system
Hello All, In our EP 6.0 system , if i try to view the exchange profile it throughs up some exceptions . First my doubt is , wheather an exchange profile is maintained for an EP system like our XI/PI systems ? If it is maintained then it has some pro
-
How to monitor on disk i/o on healthcheck and awr report on biweekly health
can you explain how to monitor from disk i/o and awr report from old snap shot to new snap shot how to check and analyze .,,,,,,,,,,,,,,,,,,,,,can any one tell few points which we can **regularly maintain for health check** thanks in advance SQL> SEL
-
Import/Export ZendAMF project
Hi, I'm wondering if I'm missing something when exporting my Flashbuilder project (Php w/Zend). Is there any way to get the services to show up in Flashbuilder after import? It seems the 'link' files in the Flex portion of the projects are internal s
-
I am trying to connect our exercise bike to our wireless network. It sees the network, but once pass phrase is put in, it won't connect. Their tech support said the problem is with the router and we may need to open ports 80, 443 and 4348. We have
-
Disk partition for install Boot Camp
Hi there Finally yesterday i get my iMac 20, but with 10.4.10 installed. Now i want to install Boot Camp to install WindowsXP. My question: I really need to make a partition to install Windows on a disk and the MacOSX in the other partition ???