Table that has the hier text names and the corresponding hier ID

Hi,
Would anyone happen to know the table that has the hier name text as it appears from the infoObject level and the corresponding Internal hierarchy ID (unique ID) for data element RSHIEID. I would want ot be bale to match the text name o f the hier to the hier ID.
Thanks
Will

Trying to make it simpler taking the 0material hierarchy note that the 0material has been loaded with 3 different hierarchies:
fields in the  H table:
HIEID  - 434FLR9O6DX0XXJS3CLIYZODD  (Refers to the particular hierarchy as mentioned I have 3 hierarchies loaded to 0Material)
OBJVERS - Active and so on
NODEID -  4 digit internal number of the hierarchy
These are the Keys that identifies the hierarchy uniquely in my case the 1st hierarchy.
Now if you want to find the nodes then based on the example above I will take the hierarchy id ie 434FLR9O6DX0XXJS3CLIYZODD for the field HIEID that would give me all the nodes of this hierarchy
Note: the HIEID for a particular hierarchy can be found from the HEADER info
Thanks,
Raj

Similar Messages

  • I have a D-LInk router that has lost my network name and protection. How to I re-set it up?

    THe protected network name is gone and now my computer just shows me connected to "dlink"
    How do I re-set it to the protected network?  I tried to use a "wizard" i found on the net but it said the emulator wouldn't work and to go back to the CD. I have no idea where the CD is

    I got to the page but it did not seem to give me an option to do what I want. I could see how to reset the ROUTER ADMINISTRATION password (for which right now there is none) but there as nothing about setting up my network name and password, which was lost.  Or is this the same thing as the router configuration password?  (I was thinking that referred to a password that would allow me to change router settings)

  • Import to new table that has additional fields

    Hi Everyone,
    I am trying to migrate a table to a new table that has the field sequence changed and also has a new field added. My main question is if it is possible to have datapump add values to the new field in the target table.
    For example:
    original table has fields a, b, d, c
    new table has fields b, c, d, a, e
    I want to load the new table and also include adding values for field e. In this case, field e is a year field, so it should be loaded with '2012'
    Does datapump have the ability to do this? Is reorganizing the fields going to cause me any problems?
    We are on oracle version 11.2.0.3

    remap data simply replaces data is a column. You can't populate additional columns when performing a data pump import. The internal code would have no idea what to put in that column and there is no user interface to tell Data Pump what to put in that column. REMAP_DATA simply replaces data in the specified column.
    remap_data:schema.table:column:function
    This function returns a single value and the column is populated with that value.
    Dean

  • I have a friend that has the IPhone and I have Straight Talk, what the issue is,when I send picture texts from my ST phone to his IPhone,he always tells me  he doesn't receive them.Why is this happening?

    I have a friend that has the IPhone and I have Straight Talk, what the issue is,when I send picture texts from my ST phone to his IPhone,he always tells me  he doesn't receive them.Why is this happening?

    You got the new iphone?????   I have same problem.  I transferred audiobooks to device to find no audiobooks on device (despite it being in iTunes as if it was).  Have you found a solution?????   I even tried to change import settings on format transfer but hasn't worked. 

  • How do I make it so that the one computer that has the main itunes account on it be used on other computers, when it comes to backing up phones and not deleting data off of phone that isnt on that computer itunes becasse its all on the one main computer

    how do I make it so that the one computer that has the main itunes account on it be used on other computers, when it comes to backing up phones and not deleting data off of phone that isnt on that computer itunes becasse its all on the one main computer. Baiscally the problem is that one comuter and one account has always been sued for eey persons itunes. Now if we want to be able to backup and use itunes on our own computers fro our iphones and such, how will all he data that is on our phones not be deleted once its plugged into a new computer? Also, is theere a way to get all the stuff on thw current itunes onto each computer, via differtn account name?

    option discovered in preferences. Really this and any feature that moves deletes or edits a users data should as far as possible be OFF BY DEFAULT. It shouldn't by default and without the users specific say do this dangerous and unnecessary thing without even letting the user know what it's doing!!! And then cause me a few hours (as i'm new to mac) searching for the option so as to switch it off. If i hadn't noticed the status cage declaring that it was copying files then i might never have twigged that this insane thing was occurring. And if i hadn't of noticed i would have been left maintaining the contents of the folder i copied the files to, the folder which as far as i was informed and so believed was also the location of the music files i was playing. How does Apple justify this 'genius' piece of software non-design? Surely it will hurt no one if this was off by default for new users - overall at least i dare say it would cause a lot less distress in the future for the unsuspecting public at large. Thanks for the support.

  • I have a dynamic table that calculates the sum of all rows, no issue.  I'm struggling with pulling out a subtotal though.  I would like to have a check box in each row  that flags those rows and gives the sum of their total.  Any help would be greatly app

    I have a dynamic table that calculates the sum of all rows, no issue.  I'm struggling with pulling out a subtotal though.  I would like to have a check box in each row  that flags those rows and gives the sum of their total.  Any help would be greatly appreciated.

    Here's something I threw together rq. The script is in the change event for the checkbox in the table. (Of course, you'll have to modify it to suit the names of your fields.)
    var rows = xfa.resolveNodes("tblAmounts.Row1[*]");
    var subtotal=0;
    for (i=0; i<rows.length; i++) if (rows.item(i).cbAdd.rawValue == 1) subtotal = subtotal + rows.item(i).nfAmount.rawValue;
    nfSubtotal.rawVlaue=subtotal;

  • JS: Get Control that has the Focus and paste something into it

    Hi,
    I want to implement some clientside code that gets the control that has the focus and copy some text into it.
    Can this be easily accomplished?
    Thanks
    Sven

    Hi,
    According to your post, my understanding is that you want to get the focus element via JavaScript.
    We can use the document.activeElement to get the current active element.
    http://stackoverflow.com/questions/497094/how-do-i-find-out-which-dom-element-has-the-focus
    http://stackoverflow.com/questions/11277989/how-to-get-the-focused-element-with-jquery
    Then you can use the obtained focus element to paste text into it.
    Thanks,
    Jason
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]
    Jason Guo
    TechNet Community Support

  • I use IMAC upstairs connected to the house wifi downstairs where the networked printer is. I have 'found' the network printer on my IMAC settings but when i send to print I am getting a pop-up box which has 'apple' as user name and is asking for password.

    I use IMAC upstairs connected to the house wifi downstairs where the networked printer is. I have 'found' the network printer on my IMAC settings but when i send to print I am getting a pop-up box which has 'apple' as user name and is asking for password. I have tried my own IMAC password but to no avail. The printer also shows a pop-up box stating 'awaiting authentication.
    Any help appreciated

    You are asking several different questions. If you need to store your photos, music, and movies on an external volume, you certainly can. Any externally connected hard disk drive will work, connected either directly to your Mac or to your Time Capsule as a shared volume.
    You should not rely upon using that as a backup device though. Although you certainly may use it for both purposes, it is a better idea to have dedicated backup devices for a variety of reasons not limited to redundancy. You would not want to simultaneously lose all your pictures as well as your backup. If they are all on the same device, that could happen. Furthermore, a backup cannot back up the volume on which it is running.
    As for adding an Extreme or Express, using its LAN port for your iMac, and then enable Internet sharing so you can effectively use the iMac as a "hotspot", you can do that too, but I am unclear on what benefit you believe this arrangement would convey for you.
    An Extreme's Guest network is separate from its Main network; that is the reason for having it.

  • HT204053 How do I delete an iCloud ID that has an old email address and I can't remember the password?

    How do I delete and iCloud account that has a former email address and I can't remember the password.  All attempts to recover the password have failed!!

    Hello there, Gary7023.
    The following Knowledge Base article made prove useful for you with the issue you're having:
    iOS 7: If you're asked for the password to your previous Apple ID when signing out of iCloud
    http://support.apple.com/kb/TS5223
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro D.

  • I just updated my ipod and now im stuck on the screen that has the itunes sign on it what do I do

    I downloaded the new update but im stuck on this screen that has the ipod charger pointing to the itunes icon i dont know what to do

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • I need to get photos off a water damaged iPhone 3GS. Can I take out the component that has the photos (is this the main board?) and put it into another of the same phone to retrieve the photos? Please help

    I need to get photos off a water damaged iPhone 3GS. It spent time underwater, saltwater. I let it dry for a week, turned it on, the apple symbol came on, then it died. I need to retrieve my photos off it. Can I take out the component that has the photos (is this the main board?) and put it into another of the same phone to retrieve the photos? Please help

    You're talking about the logic board. The two most likely things to get toasted, with water damage, are the battery(it shorts out), & the logic board. The worst water damage would be salt water. I'm afraid your logic board is toast.

  • HT4623 My iPad 2 is stuck on a black screen that has the iTunes symbol and a charger that I'm guessing means "plug into iTunes". I did so and then waited four hours to download something. And now it is saying that its going to update my iPad but it isn't

    I clicked the button in my setting thatz is saying "software update iOS 6.1.2. It turned off and now My iPad 2 is stuck on a black screen that has the iTunes symbol and a charger that I'm guessing means "plug into iTunes". I did so and then waited four hours to download something. And now it is saying that its going to update my iPad but it isn't working. I tried to "update" twice. I am VERY ANNOYED beczuse the last time i updated it, it just turned off and i didnt have ot plug it in or anything. WHY IS IT DOING THIS.....?????? My ipad will not turn on or anything. Help me FIX THIS!!!

    hi Kinney. last hour, i update my ipad 2, then im having the same problems as u. im also hoping people can solve this issue.

  • My iPhone 5 has a grey-ish blue splodge on the screen. What is it and how can I get rid of it? The place that has the spot is about the size is about 2cm,it still works where the spot is. I haven't sat on my phone or hit it to hard, not that I remember.

    The place that has the spot is about the size is about 2cm,it still works where the spot is. I haven't sat on my phone or hit it too hard, not that I remember.  I  noticed a while ago. Will it disappear? I can see the things that should be where the spot is eg it's on the keyboard and I can see the keys. Will this spread to the whole screen? How can u get rid of this?

    If you own an iPhone that is ineligible for warranty service but is eligible for Out-of-Warranty (OOW) Service, Apple will service your iPhone for the Out-of-Warranty Service fee listed below.
    iPhone model
    Out-of-Warranty Service
    iPhone 5s, iPhone 5c,
    iPhone 5
    $269
    iPhone 4s
    $199
    iPhone 4, iPhone 3GS,
    iPhone 3G, Original iPhone
    $149
    A $6.95 shipping fee will be added if service is arranged through Apple and requires shipping. All fees are in U.S. dollars and are subject to local tax.

  • I was synching my iphone 4 and unplugged it. It's now stuck on a screen that has the chord and the music note that says itunes under it. I have tried to reboot and have even cancelled my last synching process. My phone is froze

    I was synching my iphone 4 and unplugged it. It's now stuck on a screen that has the chord and the music note that says itunes under it. I have tried to reboot and have even cancelled my last synching process. My phone is froze. I need help.

    You probably have to go through a restore of the phone.
    Plug the phone in and launch iTunes, then select your phone from the left side of the menu.
    There will be an option to restore the phone and click that button.
    That will erase and restore the phone.  After it's done, it will ask you to restore from a recent backup, and you can choose to go ahead and restore.
    You should be back up and running from there, but may have to do some minor tweeks to get yourself back up exactly as you left off.  Some things like your visual voicemail password and email passwords may have to be entered again, but you'll be in good shape.

  • Pivot table that uses a Stored Procedure parameter and filters the data based on it

    Hello, my 1st post.  I am lost.  Please help.
    I am trying to create an Excel Pivot Table that has data that comes from an ODC but needs to be filtered based on a parameter from a Stored Procedure.  This involves Project Server.  I need to filter the results based on the RBS value of the logged
    in user.  My Stored Procedure can return the RBS as long as the ResourceNTAccount value is given.  I cant figure out how to tie this all together.

    Hi,
    Based on your description,I think this issue should be  more related to Programming/coding, you can sumbit a new case to MSDN forum.
    As I'm not quite formular with Project Server, all I can tell you is that it is easy to running a Stored Procedure within Excel, however, if you have to pass dynamic parameters you’ll have to turn to VBA.For detailed information,please refer
    to:
    http://blogs.office.com/2010/06/07/running-a-sql-stored-procedure-from-excel-no-vba/
    Wind Zhang
    TechNet Community Support

Maybe you are looking for