Table to check Inbound IDoc

Hi Folks,
Is there any table in SAP where I can see Inbound IDocs?
Thanks in advance,
Punit

Hi Punit,
You can check table EDIDC with field DIRECT = 2 (inbound).
Hope this will help.
Regards,
Ferry Lianto
Please reward points if helpful.

Similar Messages

Retrigger an Inbound IDoc to Become an Outbound from PoSDM to ECC

Dear PoSDM Experts,
I'm trying to browse and search for solutions on whether retriggering the inbound IDoc to an outbound IDoc from PoSDM to ECC without changing its details and had no luck. The scenario has no aggregation and it is merely passing through PoSDM. I understand it doesn't seem practical because we can point the IDoc directly to ECC without passing PoSDM. The full scenario is an inbound IDoc is created in PoSDM coming from PI and the same IDoc will be triggered and pushed to ECC without changing the details. Sample IDoc would be WPUUMS, WPUBON and WPUTAB.
Please let me know if the above scenario is possible without enhancement. If it is possible, kindly provide me how I should execute it in PoSDM.
Kind regards,
Mark

Hi Mark,
Well if that is the case then I will suggest you to go with custom development.
Create Z tables for storing Inbound IDoc data in POS DM.
Write FM to process your inbound IDocs in POS DM Z tables.
Write FM to generate your outbound IDocs from POS DM Z tables.
Thanks,
Vikrant.

SM58 - IDoc adapter inbound: IDoc data record table contains no entries

Trying to send Idocs from SAP ECC6.0 via PI 7.0 up until 2 days ago there was no problem.
Since yesterday, only one specific type of Idoc does not make it into XI (PI). In the Idoc monitor (WE02) the idocs that were created gives status 3 which is good. But all Idocs of that specific type (ZRESCR01) does not go to XI. I can only find them bakc in SM58 where it gives the following message:
IDoc adapter inbound: IDoc data record table contains no entries
I have checked SAP notes 1157385 and also 940313, none of them gives me any more insight into this error. I have also checked all the configuration in WE20, SM59, and in XI (repository and directory) and in XI IDX1, IDX2 but could not find anything that would cause this. I can also not think of anything that changed since 2 days ago.
Please point me in the right direction.

hi,
i think in sm 58 u can find entries only when there is some failure in login credential .
if there is change in IDoc structure than you have to reimport the idoc metadata defination at IDX2.otherwise not requird.
please check the logical system name pointing to the your requird target system....
please also verify thet your port should not be blocked.
pls find the link it may help
Monitoring the IDOC Adapter in XI/PI using IDX5
regards,
navneet

Database error changing table ADR2 - Inbound IDOC Create Order

Hi experts,
I have a backgroud job for program RBDAPP01 to process inbound IDOC message type OILLDD. It woked perfectly for years. Few days ago, the job got short dump and cancelled. In Error log, it shows error MESSAGE_TYPE_X Database error changing table ADR2 in function module ADDR_SAVE_INTERN.
I already try to activate trace log to see sql statement but still couldn't find anything suspicious. Have anyone been through this problem before? Please suggest.
Regards,

Hi,
Please check if this SAP note is useful. 1300825
Regards,
Srini.

Which table stored the Inbound ASN IDOC # and corresponding In.B Delivery#

Hi,
May i know which table stored the inbound ASN IDOC# and corresponding created Inbound Delivery number??
Thanks!!

Dear Hoo Laa,
You may find the Sales Organisation/Distribution Channel details in PO itself (Shipping Tab). Table where you can get Sales Organisation/Disribution Channel is EKPV.
Regards
Samier Danish

Inbound IDOC messages Retention Period- Where to Check

Hi Gurus,
Where do we specify Inbound IDOC messages rention period.
In our system I do not see Inbound IDOC messages ( coming from ECC to PI) older than 15 days.
But I see Outbound IDOC messages ( PI to ECC) older than 15 days.Also I see non IDOC messages older than 15 days.
I checked in SXMB_ADM, Integration Engine Configuration and I do not see any parameter for IDOCS.
I appreciate any pointers.
Regards,
Ramesh.

Hi,
As far as I know, there is no specific setting for IDOC mesages .
Retention period is generically set for all the messages in XI.
Inbound and outbound messages are always with respect to ECC and not PI.
(What you call inbound are actually outbound and vice versa).
Retention periods, can be viewed using SXMB_ADM transaction only.
Regards,
Ravi Kanth Talagana

Which table could check 'field description' for one IDOC segment.

Hi,
Let's take am example of IDOC segment E1EDL20. If i put 'E1EDL20' in T-code: SE11.
Then i could display its structure with full field list.
But you could find that there is 'Blank' in 'field short description'...
May i know which table could check the field short description???
Thank you!

Hi,
Probaly the name is not maintained in your logon language. Nevertheless you can check the name of all the tables in the table DD02T.
Regards,
Marcin

Cost center not checked during the inbound idoc FIDCCP2

Hi all,
Could you please give any input on this strange issue.
I am testing inbound Idoc FIDCCP2 (GLVOR = 'HRP1' ) with tcode WE19 and when I fill cost center with value 'ZZZZZ' the system post the FI document and deosn't check the cost center like in FB01.
With FB01 I have a error message "Coste center 'ZZZZ 'does not exist on 21.08.2014" and cannot post the document.
Thanks.
Farouk.

Try OSS note 114814.
Regards
Waza

Creation of Service Contract from Inbound IDOC

Hi Experts,
I am using Inbound IDOC type ORDERS02 with message type ORDERS for creation of Sales Order. Now my requirement is like to create a Service Contract from that Inbound IDOC. The IDOC type contains all the data require to create a Service Contract. The scenario is like, after creation of Sales Order it will check for the corresponding Service Contract exits or not by querying on a Z table which contains all those entries.
So my idea is to create a Z Program, in which it will check for the Service Contract and will create the same by reprocessing the same IDOC or by calling some Function Module. Please suggest how shall i proceed to create a Service Contract.
Is there any way to reprocess the IDOC or to collect the Data from the IDOC segments pass them to a FM which is responsible for creation of Inbound IDOC. Please suggest if this is feasible.
Thanks in Advance.
Regards,
Priyabrata.

Actually there is problem with BDCDATA. Inside the FM it's calling transaction with help of BDCDATA. If i am creating a Sales order or contract alone its creating successfully. But when i am trying to create both, it's retuning sy-subrc '1001' after calling the transaction on the second attempt. Is there any problem with BDCDATA like we can't handle with less time gap? Please help and give your inputs.
Regards,
Priyabrata

How to create the INBOUND Function Module for INBOUND IDOCs

Hi Friends,
Can any Suggest me How to proceed to Create an INBOUND Function Module for Processing the INBOUND IDOCS
which are recieved from XI Server ?
I am working in SAP-ISU
Here i will recieve the INBOUND IDOCs for the Meter Reading Orders.
We have a Standard INBOUND FUNCTION MODULE
IDOC_INPUT_ISU_MR_UPLOAD
which Uploads the Meter Reading Results.
I copied the Same function Module into ZIDOC_INPUT_
and working on it.
Can any one suggest me, whether i am going in correct way or not.
In IDOC_INPUT_ISU_MR_UPLOAD Inbound fun module,
BAPI_MTRREADDOC_UPLOAD is used to Update or Insert the Meter Reading Results,
My requirment is to Insert and Update the Meter Reading Orders which are Inbounded from XI.
Can I Use the Same BAPI
BAPI_MTRREADDOC_UPLOAD
to Update the below fields,
EABL-SERNR
EABL-ZWNUMMER
EABLG-ABLESGR
EABL-V_ZWSTAND
EABL-N_ZWSTAND
EABL-ABLHINW
EABL-ZSKIPC
EABL-ADAT
EABL-ATIMTATS
EABL-ADATTATS
EABL-ATIM
EABL-ZMESSAGE
EABL-ABLESER(Meter reader number)
Kindly Suggest me,
Thanks in Advance,
Ganesh

Hello Ganesh
I think you are going completely astray with you z-function module for IDoc processing.
If you look at TABLES parameter METERREADINGRESULTS (type BAPIEABLU ) of BAPI_MTRREADDOC_UPLOAD you will find many of the requested fields already:
EABL-SERNR => BAPIEABLU-SERIALNO
EABL-ZWNUMMER =>REGISTER
EABLG-ABLESGR
EABL-V_ZWSTAND
EABL-N_ZWSTAND
EABL-ABLHINW
EABL-ZSKIPC
EABL-ADAT
EABL-ATIMTATS => ACTUALMRTIME
EABL-ADATTATS => ACTUALMRDATE
EABL-ATIM
EABL-ZMESSAGE
EABL-ABLESER(Meter reader number)
Field EABL-ZMESSAGE appears to be custom field (at least I cannot find it on ECC 6.0). If this field was added using include CI_EABL then you probably can get these values into the BAPI using the EXTENSIONIN parameter.
Check routine CHECK_UPLOADRECORDS in the BAPI which allows two extension structures:
- BAPI_TE_EABL
- BAPI_TE_EOSB
Not surprisingly BAPI_TE_EABL contains the include CI_EABL.
Regards
Uwe

Scheduling agreement inbound idoc error.

Hi Experts,
I am creating an Scheduling Agreement with DELFOR02 inbound idoc, while creation the Scheduling Agreement system is giving error regarding Scheduling Agreement not found. In fact I have create the Scheduling agreement by T-code VA31. And I check the table VLPKM, there are relevant record stored.
Then I maintain the view V_T663A to not check everything when inbound idoc recevie. and tried agan in t-code BD87. the system give me another message Make an entry in all required fields.
How can I handle these error messages?
Thanks..
Regards....

Does any one has ideas for that?
Thanks.

How to create Inbound Idocs in a ABAP program? Any function Module?

Hello Experts,
My requirement is : I have sales order data which I extracted from third party system in my internal tables. In the same box I need to create inbound Idocs and then consequently create sales orders.
I have used the function module IDOC_INBOUND_WRITE_TO_DB to create inbound Idocs from Sales Orders data in internal tables. I have populated all the data records with correct PSGNUM and HLEVEL values. My plan is to create inbound idocs with this function module and send those to IDOC_INPUT_ORDERS function module which creates Sales Orders.
If a sales order in the internal table in ABAP program contains only one item, then I am getting correct idocs. But if more than one item exists for a sales order then the line item segments which got repeated in Idoc are having PSGNUM and HLEVEL values as zero when I checked in WE02. As a result the hierarchy from the second item segment is getting disturbed and getting the status 60.
I populated T_EDIDD with data records from IDOC_INBOUND_WRITE_TO_DB.
To the function module IDOC_INPUT_ORDERS, T_EDIDC and T_EDIDD are the input. I observed that in T_EDIDD also the PSGNUM and HLEVEL values are blank.
I am getting Status 60 with message 'EDI: Syntax error in IDoc (segment cannot be identified)' for idocs which have more than one item.
I need to extract sales data from third party and create inbound idocs and create sales orders in one ABAP program only. I need to display corresponding Idoc numbers for the corresponding third party sales order number in a listoutput.
Can anybody please provide inputs?
Regards.

Hi Anjali,
Thanks for the response.
I have passed the PSGNUM and HLEVEL values while populating the data records. Then I sent the data records and control record information to the function module IDOC_INBOUND_WRITE_TO_DB. Inside this function module there is code to clear the PSGNUM values and HLEVEL values.
for compatibility: clear administration data of data records
           perform data_records_wipe
                                  tables
                                      t_data_records.
FORM DATA_RECORDS_WIPE
                  TABLES
                      T_DATA_RECORDS_IN STRUCTURE EDIDD.
LOOP AT T_DATA_RECORDS_IN.
    CLEAR: T_DATA_RECORDS_IN-MANDT,
           T_DATA_RECORDS_IN-DOCNUM,
           T_DATA_RECORDS_IN-SEGNUM,
           T_DATA_RECORDS_IN-PSGNUM,
           T_DATA_RECORDS_IN-HLEVEL.
    modify t_data_records_in.
ENDLOOP.
ENDFORM.                               " DATA_RECORDS_WIPE
This is the code which is clearing all the PSGNUM and HLEVEL values. After coming out of this function module we are getting the error idocs created with disturbed hierarchy.
I need to create INBOUND Idocs with the data in ABAP program.
Please let me know if any inputs? Is there any function module existing to create Inbound Idocs inside an ABAP program?
Regards

Error while trying to post inbound idoc of message type COND_A

Hi,
I am getting error while trying to post inbound idoc of message type COND_A.
If I left Usage & Condition field of segment E1KOMG then 'Table not available' idoc message is coming
and if providing value in above fields then dump is coming.
How to solve ?
Plz do reply
Thanks
Mohit

I do not see any reason why you would need to use COND_A04 if COND_A01 is working.
What if you could get COND_A04 to post and you would face the same result as in COND_A01?
If SAP does not check wrong values, then you have to do it yourself, or you report an incident at SAP (after you have searched for OSS notes that may have fixed this error already)
For example OSS Note 1169998 - IDoc: KONP-LIFNR values not checked
fixed a situation where the vendor number was not validated.

Error while processing inbound Idoc (HRMDA_07) with FM IDOC_INPUT_HRMD

Hello,
I have a inbound Idoc of type HRMD_A (basistype HRMD_A07) which is processed by Function module (FM) IDOC_INPUT_HRMD with proofing. After processing an Idoc the status Monitor for ALE messages (BD87) tell me that my Idoc has status 53, which should be the result i would like to have.
Unfortunately when i go to transaction PA20 and check the infotypes, i see that infotype 0302 isn't created. When analyzing this problem i see that during the processing the Infotypes are posted with HR_MAINTAIN_MASTERDATA (dialog mode is 0 and luw_mode = 0 from include LRHA2F02 FORM save_pa_pb_infty) When this is done for infotype 0302 sy-subrc <> 0 the message is A complex application error has occured. This error message is placed in Export parameters
Return and Return1
of HR_MAINTAIN_MASTERDATA. When the program returns to the calling Form it checks if there is message of type E in HR_RETURN (see below) :
CALL FUNCTION 'HR_MAINTAIN_MASTERDATA'
          EXPORTING
            pernr                          = ins_objects-objid       "#EC DOM_EQUAL
            actio                           = 'INS'
            tclas                           = tclas
            dialog_mode               = dial_mode
            luw_mode                  = '0'
            no_existence_check = $cross
            no_enqueue              = $cross
          IMPORTING
            return1                       = return
            hr_return                    = hr_return
          TABLES
            proposed_values    = proposed_values.
        REFRESH proposed_values.
     IF hr_return-msgty = 'E'.                           "note 984409
      CLEAR protocol_error.
      protocol_error-msgty = hr_return-msgty.
      protocol_error-msgid = hr_return-msgid.
      protocol_error-msgno = hr_return-msgno.
      protocol_error-msgv1 = hr_return-msgv1.
      protocol_error-msgv2 = hr_return-msgv2.
      protocol_error-msgv3 = hr_return-msgv3.
      protocol_error-msgv4 = hr_return-msgv4.
      READ TABLE t_hrobjinfty WITH KEY objid = hr_return-pernr
                                       infty = hr_return-infty
                                       subty = hr_return-subty.
      protocol_error-segnum = t_hrobjinfty-segnum.
      protocol_error-routid = 'create_prf_pa_pb_object'
As mentioned above, the error message is only placed in the parameters Return and Return1 and not in HR_RETURN.please read the first reply

Hi,
I think you have preety much done from your end itself .
Could you please tell me what you got in this parameters:
     protocol_error-msgty = hr_return-msgty.
      protocol_error-msgid = hr_return-msgid.
      protocol_error-msgno = hr_return-msgno.
      protocol_error-msgv1 = hr_return-msgv1.
      protocol_error-msgv2 = hr_return-msgv2.
      protocol_error-msgv3 = hr_return-msgv3.
      protocol_error-msgv4 = hr_return-msgv4.
It may help us to track down the issue in more better way .
Thanks!

B1358 error while posting inbound idoc with a FM

Hi
We are trying to post and inbound IDOC with the help of an rfc and eventually creating an invoice from a bdc wrapped in the RFC
The idocs are successfully pushed to R/3 while they are not getting posted and the error code in we02 is as follows
No status record was passed to ALE by the application
Message no. B1358
Diagnosis
The application failed to return a status record to the ALE layer after the IDoc was processed.
This is due to an error in the application function module which processed the inbound IDoc.
Procedure
If you wrote the application function module yourself, you need to change the program.
If the function module in question is a standard application function module, you should consult SAP.
Note: we are using a custom function module
regards
krishna

Hi Krishna,
I assume that your function module processing the IDOC does not follow the ALE/IDOC processing rules.
Please check out the programming guidelines in the SAP Online Help under:
<a href="http://help.sap.com/saphelp_nw70/helpdata/en/78/21758051ce11d189570000e829fbbd/frameset.htm">http://help.sap.com/saphelp_nw70/helpdata/en/78/21758051ce11d189570000e829fbbd/frameset.htm</a>
Important are the parameters and tables that need to be returned, containing the correct IDOC processing status. Please take the IDOC processing quite serious in regards to complete Logical Unit of Works.
Best regards,
SIlvia

Table to check Inbound IDoc

Similar Messages

Maybe you are looking for