Table to check the T.codes usage

Hi,
I want to know the table name in R/3 which will be displaying the transaction codes usage details as i can check the current days usage in st03n by selecting the transaction profile but intend to have the list for the previous days
Appreciate for your solution and <removed_by_moderator>
Read the "Rules of Engagement"
Regards,
Dheeraj
Edited by: Juan Reyes on Feb 11, 2009 12:24 PM

Use tables TSTC (list of tcodes) and CDHDR(where used list of tcodes) to write a ABAP program.
Or If else you can use ST03N to see the list of tcodes used by users.
Re: User Information
Regards,
Jazz

Similar Messages

How to check the tran code for specific activity.

Hello friends ,
could you please let me know how to check the tran code for specific activity . AS in table , i can check , what transaction does what ? But now i need to check the transaction for specific activity .
E.g , For Administrator workbench , there is transcation like RSA1 .
thanks in advance
Regards

Hi,
try the TSTC table with SE16.
Hope it helps,
MG

Why does it say my coupon code is "Invalid coupon code. Please check the coupon code and re-enter."

When I enter my coupon code to get my serial number it says "Invalid coupon code. Please check the coupon code and re-enter." It is the correct coupon code. And I have just deactivated my lisence on my old computer.

If you had not deactivated it on the old computer and it is a Windows machine there would have been a chance of getting it using Belarc Advisor
(http://www.belarc.com/free_download.html). I do not know if you can still do so.
You can try contacting Adobe support via chat and see if they can help.
Serial number and activation chat support (non-CC)
http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )

How to syntax check the source code of custom methos of classes?

Hi,
Experts,
I want to check the syntax errors is present or not in methods of classes, to check that is there any function module or classes for that?
Thank U,
Shabeer Ahmed.

T.CODE :- SLIN
USING THIS T.CODE CHECK SYNTAX ERROR AND ALL
LIKE
SYNTAX
PERFOMR/FORM
FUNCTION
AUTHORIZATION
CHECK LOAD TABLE
SET/GET PARAMETER IDs
MESSAGE
etc....

To check the source code(VI) in absence of real hardware

I need to check the VI , which is developed to measure pressure with pressure transducer.
Later this VI is deplyed in the Test stand system as .exe file. At the test stand system we have all the hardware from the PCI DAq card to the pressure transducer.
But the system where the software is there dont have the hardware.
So how can i check the code in absence of hardware?
Can the Simulate signal will be helpful or we should need atleat pci-Daq card and waveform generator to check the code.
Any suggestions in this regard will be helpful
Many thanks
Regards
Kirit

Hi Kirit,
You should go in MAX, and under My System, right click on "Devices and interfaces" then 'Create new ' and then 'NI-DAQmx simulated device'. In the M series or any , you can find both PCI, PXI cards.Select the particular device and click ok. This should allow you to test your code with a simulated device.

Check the source code in absence of physical Hardware

For one of my applications, i have to work with 4 counters.So i increased counter input channels from 2 to 4 in the source code. But we are yet to get the hardware as we have a PCI card which can read 2 counters. But before we go for the hardware purchase, i want to make sure my source code which has 4 counters work.
I want to know whether there is any provision to check increased counter channels functioning.
Pls give me suggestion & procedure if you have any for this type of issues.
thank you in advance
-KIRIT

Do you not know what the typical measurement is supposed to be? By failing data, I mean a measurement that is outside what you would expect. You need this if the count is supposed to be some value and you have code that takes some sort of action when it is outside a limit. If you don't really care, then just set it up to return a range of nominal values.
Below is some simple code to generate a random number between a min and max range. You can replace the min and max with constants or just have the random count be a constant.
I hope you are aware that the simulated count function would be used in place of the DAQmx Read/DAQ Assistant. For counters, you cannot use a simulate DAQmx device to return anything but a 0. You could have a case statement with one case having the DAQmx function and the other case having the simulated data function.
Message Edited by Dennis Knutson on 07-24-2008 01:05 PM
Attachments:
Random Number Between a Range.PNG ‏3 KB

Check the coupon code section for limited time deal

Latest offer: 'Save Over 50% Off Today's Woot' In the last day, 4 promos have been used. Community sourced deals are a great source of discounts and coupons. How do wingnuts gain the best Woot Coupon Code guidance? Take a look at our 5 Woot offers including 5 sales. A basic search of the Internet will provide you with a detailed listing of available Woot Coupon Code for sale. That has changed. The Sellout! The last time an offer was used was July 10, 2015.How to use a Woot coupon Woot features "tons of cool stuff, sold cheap." Sign up for the Deal of the Day to receive discounts of 50-90% on the best brands. Herein you shall learn in regard to the shortcuts of Woot Coupon Code. Page offers last chance deals for hardcore cheapskates.. Check the Woot!plus section for limited time deal events. One way I guard against that is by refusing to buy sharply discounted Woot Coupon Code. Get more info :- http://aulaworld.com/woot-coupon-code/

Find a serial number
For anything else contact support directly or work things out with your reseller.
Mylenium

Table for checking the appended fields in the standard extractor

Hello,
Please let me know the table name for checking the appended fields in the standard extractor.
Thanks in advance

Hello,
From Rsa6 , goto your extractor from there you may get the name of your strucutre
Go to DD03L and enter this name
And you get to see all the fields there..
waiting for your feedback.
Regards
Nitin Bhatia

Table which stores the return codes

Hi All
I would like to know in which table the return codes for a BAPI get stored for the structure BAPIRET2.
Thanks in advance
Sree Ramya

Hi sree,
1. the return codes are nothing
but standard messages of the transaction.
2. such messages and their codes are stored in table T100.
regards,
amit m.

Check the source code

Hi Folks,
I know it should be very basic question. I am not a complete technical person, but i am trying to understand the code. Please guide me for the below issues.
How to see the source code for method (which is inside the interface) ?
[SE24 --> Double Click Interface --> Method tab]
I can see code for some method by click the Code button in Class --> Methods. But there are some extra method defined inside the interface. How to see those source code.

place the cursor over that method and click the where - used lists button which will show you all the classes that are using this method
Thanks
Bala Duvvuri

I just purchased photoshop elements 12 from Best Buy. Followed instructions and triple checked the redemption code I entered. Invalid???

Trying to install new elements 12. The Redemption Code that came in package is INVALID. Please help!

I have a similar issue with Photoshop CS6. The site would not give me the serial number when I provided the Redemption Code. It said I didn't need a serial number, just install/download the software. The install process requires the serial number. I ended up in chat. Apparently they have retrieved my serial number and I should now be able to sign into my Adobe account and retrieve it. The catch is that they said it could take up to 24 hours to show up for me. So I have lost the day now.
So my suggestion is to go to the customer support chat function. Maybe your results will be a bit more timely than mine.

How can I change the country after a massage saying that check the security code

How can I change the country after a massage saying that check the security code

Massage?
Why not ask the masseuse who gave you the massage?

Urgent ..... check the program code,

The below is my code, my superior say that ,this is not correct
he suggest me not use OCCUR or With header line,
And even is there anything worng in ''Start od selection''
so anyone check my code and tell me what is worng in it and what correct is required
Tables: LIKP, LIPS, VBRK, VBRP, KNA1, MARA, MAKT, vbpa, VBAK.
DATA : itab type STANDARD TABLE OF ZTARA_STRUC WITH HEADER LINE.
Select-options: so_kunnr for kna1-kunnr,
So_Fkdat for vbrk-fkdat.
data : container type ref to cl_gui_custom_container,
       grid type ref to cl_gui_alv_grid,
       fieldcat type lvc_t_fcat.
DATA : lt_vbrk type STANDARD TABLE OF vbrk WITH HEADER LINE,
       lt_vbrp TYPE STANDARD TABLE OF vbap WITH HEADER LINE,
       lt_VBAK TYPE STANDARD TABLE OF VBAK WITH HEADER LINE,
       lt_veda TYPE STANDARD TABLE OF veda WITH HEADER LINE,
       lt_kna1 TYPE STANDARD TABLE OF KNA1 WITH HEADER LINE,
       it_vbak type standard table of vbak with header line.
Start-of-selection.
so_kunnr = so_kunnr-low.
So_Fkdat = So_Fkdat-low.
SELECT kunnr Name1 ort01 FROM KNA1 INTO CORRESPONDING FIELDS OF TABLE lt_kna1
WHERE kunnr in so_kunnr.
loop at lt_kna1.
   itab-CUSTOMER_NUMBER = lt_kna1-kunnr.
   itab-CUSTOMER_NAME = lt_kna1-Name1.
   itab-city = lt_kna1-ort01.
SELECT vbeln fkdat kunag FROM VBRK INTO CORRESPONDING FIELDS OF TABLE lt_vbrk
WHERE kunag = itab-CUSTOMER_NUMBER
    AND Fkdat in So_Fkdat.
if sy-SUBRC = 0.
LOOP AT lt_vbrk.
itab-SOLD2PARTY = lt_kna1-kunnr.
itab-INVOICE_DATE = lt_vbrk-Fkdat.
itab-Vbeln = lt_vbrk-Vbeln.
SELECT POSNR Matnr ARKTX FROM vbrp INTO CORRESPONDING FIELDS OF TABLE lt_vbrp
WHERE vbeln = itab-Vbeln.
LOOP AT lt_vbrp.
itab-MATERIAL_DESCRIP = lt_vbrp-ARKTX.
SELECT AUDAT FROM VBAK INTO CORRESPONDING FIELDS OF TABLE lt_VBAK
WHERE VBELN = itab-VBELN.
LOOP AT lt_VBAK.
itab-AUDAT = lt_VBAK-AUDAT.
SELECT VBEGDAT VENDDAT FROM veda INTO CORRESPONDING FIELDS OF TABLE lt_veda
WHERE VBELN = itab-CUSTOMER_NUMBER.
LOOP AT lt_veda.
itab-VBEGDAT = lt_veda-VBEGDAT.
itab-VENDDAT = lt_veda-VENDDAT.
   ENDLOOP.
    ENDLOOP.
      ENDLOOP.
        ENDLOOP.
         ENDLOOP.
*select * FROM vbak INTO CORRESPONDING FIELDS OF TABLE it_vbak
WHERE VBELN = itab-VBELN
and ERDAT = itab-invoice_date.
*LOOP AT it_vbak.
*itab-VBELN = it_vbak-VBELN.
itab-INVOICE_DATE   = it_vbak-ERDAT.
APPEND itab.
*ENDLOOP.
else.
exit.
endif.
APPEND itab.
          ENDLOOP.
call screen 9000.
*&      Module STATUS_9000 OUTPUT
      text
MODULE STATUS_9000 OUTPUT.
SET PF-STATUS 'MAIN MENU'.
SET TITLEBAR 'TITLE'.
CREATE OBJECT CONTAINER
   EXPORTING
    PARENT                      =
     CONTAINER_NAME              = 'CUS_CONTAINER'
    STYLE                       =
    LIFETIME                    = lifetime_default
    REPID                       =
    DYNNR                       =
    NO_AUTODEF_PROGID_DYNNR     =
   EXCEPTIONS
     CNTL_ERROR                  = 1
     CNTL_SYSTEM_ERROR           = 2
     CREATE_ERROR                = 3
     LIFETIME_ERROR              = 4
     LIFETIME_DYNPRO_DYNPRO_LINK = 5
     others                      = 6
IF SY-SUBRC <> 0.
*MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
          WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CREATE OBJECT GRID
EXPORTING
   I_SHELLSTYLE      = 0
   I_LIFETIME        =
     I_PARENT          = CONTAINER
   I_APPL_EVENTS     = space
   I_PARENTDBG       =
   I_APPLOGPARENT    =
   I_GRAPHICSPARENT =
   I_NAME            =
   I_FCAT_COMPLETE   = SPACE
EXCEPTIONS
    ERROR_CNTL_CREATE = 1
    ERROR_CNTL_INIT   = 2
    ERROR_CNTL_LINK   = 3
    ERROR_DP_CREATE   = 4
    others            = 5
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
           WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL METHOD GRID->SET_TABLE_FOR_FIRST_DISPLAY
EXPORTING
   I_BUFFER_ACTIVE               =
   I_BYPASSING_BUFFER            =
   I_CONSISTENCY_CHECK           =
    I_STRUCTURE_NAME              = 'ZTARA_STRUC'
   IS_VARIANT                    =
   I_SAVE                        =
   I_DEFAULT                     = 'X'
   IS_LAYOUT                     =
   IS_PRINT                      =
   IT_SPECIAL_GROUPS             =
   IT_TOOLBAR_EXCLUDING          =
   IT_HYPERLINK                  =
   IT_ALV_GRAPHICS               =
   IT_EXCEPT_QINFO               =
   IR_SALV_ADAPTER               =
CHANGING
     IT_OUTTAB                     = itab[]
   IT_FIELDCATALOG               = lt_fcat
   IT_SORT                       =
   IT_FILTER                     =
EXCEPTIONS
    INVALID_PARAMETER_COMBINATION = 1
    PROGRAM_ERROR                 = 2
    TOO_MANY_LINES                = 3
    others                        = 4
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
           WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDMODULE.                 " STATUS_9000 OUTPUT
*&      Module USER_COMMAND_9000 INPUT
      text
MODULE USER_COMMAND_9000 INPUT.
case sy-ucomm.
when 'BACK'.
Leave Program.
when others.
Leave Program.
endcase.
ENDMODULE.                 " USER_COMMAND_9000 INPUT

hI
USE types DECLARATION LIKE THIS SEE THIS PROGRAM AND YOU CAN UNDERSTAND VERY EASILY
**************DATA TYPES DECLARATION **********************
TABLES: HRP1001, HRP1026, HRP1000,PCHDY.
TYPE-POOLS SLIS.
TYPES :BEGIN OF ST_OUTPUT,
        COUNT TYPE STRING,
        OBJID TYPE HRP1001-OBJID,
        STEXT TYPE HRP1000-STEXT,
        BEGDA TYPE HRP1000-BEGDA,
        ENDDA TYPE HRP1000-ENDDA,
        CANCRT TYPE T77CRT-CANCRT,
        AEDTM TYPE HRP1026-AEDTM,
        UNAME TYPE HRP1026-UNAME,
        LSTEXT TYPE HRP1000-STEXT,
       RINVT TYPE T777V-RINVT,
       END OF ST_OUTPUT.
TYPES: BEGIN OF ST_HRP1000,
        OBJID TYPE HRP1001-OBJID,
        STEXT TYPE HRP1000-STEXT,
       END OF ST_HRP1000.
TYPES : BEGIN OF ST_HRP1001,
         OTYPE TYPE HRP1001-OTYPE,
         OBJID TYPE HRP1001-OBJID,
         RELAT type hrp1001-RELAT,
         BEGDA TYPE HRP1001-BEGDA,
         ENDDA TYPE HRP1001-ENDDA,
         SCLAS TYPE HRP1001-SCLAS,
         SOBID TYPE HRP1001-SOBID,
        END OF ST_HRP1001.
TYPES : BEGIN OF ST_HRP1026,
         OTYPE TYPE HRP1026-OTYPE,
         OBJID TYPE HRP1001-OBJID,
         AEDTM TYPE HRP1026-AEDTM,
         UNAME TYPE HRP1026-UNAME,
         DELET TYPE HRP1026-DELET,
         CANCR TYPE HRP1026-CANCR,
        END OF ST_HRP1026.
TYPES : BEGIN OF ST_REASON,
         CANCR TYPE HRP1026-CANCR,
         CANCRT TYPE T77CRT-CANCRT,
        END OF ST_REASON.
TYPES : BEGIN OF ST_SOBID,
         OTYPE TYPE HRP1001-OTYPE,
         OBJID TYPE HRP1001-OBJID,
         RELAT type hrp1001-OBJID,
         BEGDA TYPE HRP1001-BEGDA,
         ENDDA TYPE HRP1001-ENDDA,
         SCLAS TYPE HRP1001-SCLAS,
         SOBID TYPE HRP1001-OBJID,
        END OF ST_SOBID.
TYPES : BEGIN OF ST_OBJID,
         OBJID TYPE HRP1001-OBJID,
        END OF ST_OBJID.
TYPES : BEGIN OF ST_LOCATION,
         OTYPE TYPE HRP1001-OTYPE,
         OBJID TYPE HRP1001-OBJID,
         RSIGN TYPE HRP1001-RSIGN,
         RELAT TYPE HRP1001-RELAT,
         SCLAS TYPE HRP1001-SCLAS,
         SOBID TYPE HRP1001-SOBID,
        END OF ST_LOCATION.
TYPES : BEGIN OF ST_LOCATION1,
         OTYPE TYPE HRP1001-OTYPE,
         OBJID TYPE HRP1001-OBJID,
         RSIGN TYPE HRP1001-RSIGN,
         RELAT TYPE HRP1001-RELAT,
         SCLAS TYPE HRP1001-SCLAS,
         SOBID TYPE HRP1001-OBJID,
        END OF ST_LOCATION1.
TYPES : BEGIN OF ST_LSTEXT,
         OTYPE TYPE HRP1000-OTYPE,
         OBJID TYPE HRP1000-OBJID,
         LSTEXT TYPE HRP1000-STEXT,
        END OF ST_LSTEXT.
TYPES : BEGIN OF ST_OBJID_SH,
         OTYPE TYPE HRP1000-OTYPE,
         OBJID TYPE HRP1000-OBJID,
        END OF ST_OBJID_SH.
DATA : IT_OBJID_SH TYPE STANDARD TABLE OF ST_OBJID_SH.
DATA : WA_OBJID_SH TYPE ST_OBJID_SH.
DATA : IT_LSTEXT TYPE STANDARD TABLE OF ST_LSTEXT.              "TOS STORE THE TEXT OF COURCE LOCATION
DATA : WA_LSTEXT TYPE ST_LSTEXT.
DATA : IT_LOCATION TYPE STANDARD TABLE OF ST_LOCATION.          " TO STORE THE LOCATION OF COURCE
DATA : WA_LOCATION TYPE ST_LOCATION.
DATA : IT_LOCATION1 TYPE STANDARD TABLE OF ST_LOCATION1.        " TO CONVERT SOBID INTO OBJID FOR COURCE LOCATION
DATA : WA_LOCATION1 TYPE ST_LOCATION1.
DATA : IT_SOBID TYPE STANDARD TABLE OF ST_SOBID.                " TO CHANGE THE SOBID OF HRP1001 TO OBJID OF HRP1026
DATA : WA_SOBID TYPE ST_SOBID.                                   " BY USING FOR ALL ENTRIES
DATA : IT_REASON TYPE STANDARD TABLE OF ST_REASON.              "TO STORE T HE REASON FOR CANCELL TEXT
DATA : WA_REASON TYPE ST_REASON.
DATA : IT_OUTPUT TYPE STANDARD TABLE OF ST_OUTPUT.               "OUTPUT FEILDS OF REPORT.
DATA : WA_OUTPUT TYPE ST_OUTPUT.
DATA : IT_OUTPUT_1 TYPE STANDARD TABLE OF ST_OUTPUT.               " TEMP OUTPUT FEILDS OF REPORT.
DATA : WA_OUTPUT_1 TYPE ST_OUTPUT.
DATA : IT_HRP1000 TYPE STANDARD TABLE OF ST_HRP1000.             "DATA FROM HRP1000 TABLE
DATA : WA_HRP1000 TYPE ST_HRP1000.
DATA : IT_HRP1001 TYPE STANDARD TABLE OF ST_HRP1001.             "DATA FROM HRP1001 TABLE
DATA : WA_HRP1001 TYPE ST_HRP1001.
DATA : IT_HRP1026 TYPE STANDARD TABLE OF ST_HRP1026.              "DATA FROM HRP1026 TABLE
DATA : WA_HRP1026 TYPE ST_HRP1026.
DATA : IT_OBJID TYPE STANDARD TABLE OF ST_OBJID.                  " TO STORE THE OBJID OF HRP1001
DATA : WA_OBJID TYPE ST_OBJID.
DATA: WS_FCAT    TYPE SLIS_FIELDCAT_ALV .                         " FEILDCATALOG FOR ALV REPORT
DATA: IN_FCAT    TYPE SLIS_T_FIELDCAT_ALV.
DATA: W_LAYOUT   TYPE SLIS_LAYOUT_ALV.
DATA : LV_COUNT TYPE I.                                           "FEILD FOR SERIAL NUMBER
***************************END OF DATA DECLARATION******************************************
***********SELECTION SCREEN DESIGN***********************
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
*SELECT-OPTIONS : S_OTYPE FOR HRP1001-OTYPE NO INTERVALS .
SELECT-OPTIONS : S_OBJID FOR HRP1001-OBJID NO INTERVALS .
SELECT-OPTIONS : DATE FOR SY-DATUM NO-EXTENSION OBLIGATORY.
SELECTION-SCREEN END OF BLOCK B1.
**********END OF SELECTION SCREEN DESIGN*****************
*****INITIALIZATION VENT TO ASIGN DEFAULT VALUES TO OTYPE
*INITIALIZATION.
S_OTYPE-LOW = 'D'.
S_OTYPE-SIGN = 'I'.
S_OTYPE-OPTION = 'EQ'.
APPEND S_OTYPE.
CLEAR S_OTYPE.
*************END OF EVENT INITIALIZATION*****************
*********VALIDATION FOR SCREEN FIELDS********************
AT SELECTION-SCREEN ON VALUE-REQUEST FOR S_OBJID-LOW.
IF S_OBJID IS NOT INITIAL.
    SELECT OTYPE OBJID FROM HRP1000
                 INTO TABLE IT_OBJID_SH
                 WHERE OTYPE = 'D'.
IF SY-SUBRC EQ 0.
SEARCH HELP FOR QUALIFICATION.
    CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
      EXPORTING
             DDIC_STRUCTURE         = ' '
        RETFIELD               = 'OBJID'
             PVALKEY                = ' '
       DYNPPROG               = SY-REPID
       DYNPNR                 = SY-DYNNR
       DYNPROFIELD            = 'S_OBJID'
             STEPL                  = 0
             WINDOW_TITLE           =
             VALUE                  = ' '
       VALUE_ORG              = 'S'
             MULTIPLE_CHOICE        = ' '
             DISPLAY                = ' '
             CALLBACK_PROGRAM       = ' '
             CALLBACK_FORM          = ' '
             MARK_TAB               =
           IMPORTING
             USER_RESET             =
      TABLES
        VALUE_TAB              = IT_OBJID_SH
             FIELD_TAB              =
             RETURN_TAB             = RETURN_TAB
             DYNPFLD_MAPPING        =
           EXCEPTIONS
             PARAMETER_ERROR        = 1
             NO_VALUES_FOUND        = 2
             OTHERS                 = 3
    IF SY-SUBRC <> 0.
          MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                  WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
ENDIF.
   IF SY-SUBRC NE 0.
     MESSAGE 'NO RECORD FOUND FOR THE GIVEN SELECTION CRITERIA.' TYPE 'E'.
   ENDIF.
ENDIF.
REFRESH IT_OBJID.
***************VALIDATION OF SCREEN FIELDS ENDS***********
*****************START OF SELECTION ************************
START-OF-SELECTION.
SELECT OTYPE
         OBJID
         RELAT
         BEGDA
         ENDDA
         SCLAS
         SOBID FROM HRP1001 INTO TABLE IT_HRP1001
                    WHERE OTYPE = 'D'
                        AND OBJID IN S_OBJID
                        AND BEGDA GE DATE-LOW
                        AND ENDDA LE DATE-HIGH
                        AND ( SCLAS = 'E' OR SCLAS = 'ET' ).
IF SY-SUBRC NE 0.
    MESSAGE 'NO RECORD FOUND FOR THE GIVEN SELECTION CRITERIA ' TYPE 'E'.
ENDIF.
LOOP AT IT_HRP1001 INTO WA_HRP1001.
    WA_SOBID-OTYPE = WA_HRP1001-OTYPE.
    WA_SOBID-OBJID = WA_HRP1001-OBJID.
    WA_SOBID-RELAT = WA_HRP1001-RELAT.
    WA_SOBID-BEGDA = WA_HRP1001-BEGDA.
    WA_SOBID-ENDDA = WA_HRP1001-ENDDA.
    WA_SOBID-SCLAS = WA_HRP1001-SCLAS.
    WA_SOBID-SOBID = WA_HRP1001-SOBID.
    APPEND WA_SOBID TO IT_SOBID.
ENDLOOP.
SELECT OTYPE
         OBJID
         AEDTM
         UNAME
         DELET
         CANCR
        NCONT
          FROM HRP1026
          INTO TABLE IT_HRP1026
          FOR ALL ENTRIES IN IT_SOBID
             WHERE OBJID = IT_SOBID-SOBID
             AND ( OTYPE = 'E' OR OTYPE = 'ET' )
                 AND DELET = 'X' AND
                 BEGDA GE DATE-LOW AND
                 ENDDA LE DATE-HIGH.
IF SY-SUBRC EQ 0.
    SELECT OBJID
           STEXT
           FROM HRP1000
           INTO TABLE IT_HRP1000
           FOR ALL ENTRIES IN IT_SOBID
              WHERE OBJID = IT_SOBID-SOBID AND
                    BEGDA GE DATE-LOW AND
                    ENDDA LE DATE-HIGH.
    SELECT CANCR
           CANCRT
           FROM T77CRT
           INTO TABLE IT_REASON
           FOR ALL ENTRIES IN IT_HRP1026
           WHERE CANCR = IT_HRP1026-CANCR
             AND LANGU = 'E' .
********PERFORM FOR GETTING T HE LOCATION OF THE COURCE**
PERFORM GET_LOCATION.
**************END OF LOCATION OF COURCE ******************
ELSE.
    MESSAGE 'NO RECORD FOUND FOR THE GIVEN SELECTION CRITERIA ' TYPE 'E'.
ENDIF.
*****PERFORM FOR GETTING DATA INTO THE FINAL INTERNAL TABLE IT_OUTPUT**
PERFORM GET_DATA.
*********************************END OF PERFORM ET DATA ***************
***********LOGIC FOR PRONTING NUMBER OF RECORDS ***********************
LV_COUNT = 0.
LOOP AT IT_OUTPUT INTO WA_OUTPUT.
    LV_COUNT = LV_COUNT + 1.
    WA_OUTPUT-COUNT = LV_COUNT.
    APPEND WA_OUTPUT TO IT_OUTPUT_1.
ENDLOOP.
REFRESH IT_OUTPUT.
IT_OUTPUT = IT_OUTPUT_1.
********************END OF LOGIC FOR NUMBER OF RECORDS ***************
****************DISPLAYING OUTPUT BY USEING GRID DISPLAY**********
PERFORM ALV_DISPLAY.
****************************END OF PERFORM FOR DISPLAYING **********
*&      Form PERFORM_ALV
DISPLAY THE RECORDS IN ALV GRID FORMAT.
FORM ALV_DISPLAY.
PERFORM FIELD_CATALOG USING 'COUNT' 'Sr. No.'.
PERFORM FIELD_CATALOG USING 'OBJID' 'COURCE ID.'.
PERFORM FIELD_CATALOG USING 'STEXT' 'COURCE NAME'.
    PERFORM FIELD_CATALOG USING 'LSTEXT' 'COURCE LOATION'.
PERFORM FIELD_CATALOG USING 'BEGDA' 'BEGIN DATE '.
PERFORM FIELD_CATALOG USING 'ENDDA' 'END DATE '.
PERFORM FIELD_CATALOG USING 'CANCRT' 'REASON'.
PERFORM FIELD_CATALOG USING 'AEDTM' 'DATE Of CANCEL'.
PERFORM FIELD_CATALOG USING 'NCONT' 'NUMBER OF BOOKINGS'.
PERFORM FIELD_CATALOG USING 'LOCTX' 'COURCE LOCATION'.
PERFORM FIELD_CATALOG USING 'UNAME' 'WHO CANCELLED'.
PERFORM FIELD_CATALOG USING 'LSTEXT' 'COURCE LOATION'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      I_STRUCTURE_NAME = 'IT_OUTPUT'
      I_GRID_TITLE     = ' Cancelled courses with reason '
      IT_FIELDCAT      = IN_FCAT
    TABLES
      T_OUTTAB         = IT_OUTPUT.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    "PERFORM_ALV
*&      Form FIELD_CATALOG
      text
     -->FIELD_NAME text
     -->DIS_TEXT   text
FORM FIELD_CATALOG USING FIELD_NAME DIS_TEXT.
CLEAR WS_FCAT.
WS_FCAT-TABNAME = 'IT_OUTPUT'.
WS_FCAT-FIELDNAME = FIELD_NAME.
WS_FCAT-SELTEXT_M = DIS_TEXT.
APPEND WS_FCAT TO IN_FCAT .
ENDFORM.                    "FIELD_CATALOG
*&      Form GET_DATA
      text
--> p1        text
<-- p2        text
FORM GET_DATA .
*sort it_sobid by objid.
LOOP AT IT_SOBID INTO WA_SOBID." where otype eq s_otype and objid eq s_objid.
    READ TABLE IT_HRP1026 WITH KEY OBJID = WA_SOBID-SOBID OTYPE = WA_SOBID-SCLAS INTO WA_HRP1026.
    IF SY-SUBRC EQ 0.
      READ TABLE IT_HRP1000 WITH KEY OBJID = WA_SOBID-SOBID INTO WA_HRP1000.
   READ TABLE IT_REASON WITH KEY CANCR = WA_HRP1026-CANCR INTO WA_REASON.
      WA_OUTPUT-OBJID = WA_HRP1026-OBJID.
      WA_OUTPUT-BEGDA = WA_SOBID-BEGDA.
      WA_OUTPUT-ENDDA = WA_SOBID-ENDDA.
      WA_OUTPUT-AEDTM = WA_HRP1026-AEDTM.
      WA_OUTPUT-UNAME = WA_HRP1026-UNAME.
   WA_OUTPUT-NCONT = WA_HRP1026-NCONT.
   READ TABLE IT_HRP1000 WITH KEY OBJID = WA_SOBID-SOBID INTO WA_HRP1000.
      WA_OUTPUT-STEXT = WA_HRP1000-STEXT.
      READ TABLE IT_REASON WITH KEY CANCR = WA_HRP1026-CANCR INTO WA_REASON.
      WA_OUTPUT-CANCRT = WA_REASON-CANCRT.
      CLEAR WA_REASON-CANCRT.
      READ TABLE IT_LOCATION1 WITH KEY OBJID = WA_HRP1026-OBJID INTO WA_LOCATION1..
      READ TABLE IT_LSTEXT WITH KEY OBJID = WA_LOCATION1-SOBID OTYPE = 'F' INTO WA_LSTEXT.
             WA_OUTPUT-LSTEXT = WA_LSTEXT-LSTEXT.
             CLEAR WA_LSTEXT-LSTEXT.
      APPEND WA_OUTPUT TO IT_OUTPUT.
      CLEAR WA_OUTPUT.
      CLEAR WA_OUTPUT-CANCRT.
    ENDIF.
ENDLOOP.
ENDFORM.                    " GET_DATA
*&      Form GET_LOCATION
      text
--> p1        text
<-- p2        text
FORM GET_LOCATION .
SELECT OTYPE
       OBJID
       RSIGN
       RELAT
       SCLAS
      SOBID
      FROM HRP1001
      INTO TABLE IT_LOCATION
      FOR ALL ENTRIES IN IT_HRP1026
      WHERE OTYPE = 'E' AND OBJID = IT_HRP1026-OBJID
       AND RSIGN = 'A' AND RELAT = '024' AND SCLAS = 'F'
                AND BEGDA GE DATE-LOW AND ENDDA LE DATE-HIGH.
IF SY-SUBRC NE 0.
    MESSAGE 'NO RECORD FOUND FOR THE GIVEN SELECTION CRITERIA ' TYPE 'E'.
ENDIF.
LOOP AT IT_LOCATION INTO WA_LOCATION.
    WA_LOCATION1-OTYPE = WA_LOCATION-OTYPE.
    WA_LOCATION1-OBJID = WA_LOCATION-OBJID.
        WA_LOCATION1-RSIGN = WA_LOCATION-RSIGN.
    WA_LOCATION1-RELAT = WA_LOCATION-RELAT.
    WA_LOCATION1-SCLAS = WA_LOCATION-SCLAS.
    WA_LOCATION1-SOBID = WA_LOCATION-SOBID.
    APPEND WA_LOCATION1 TO IT_LOCATION1.
   CLEAR WA_LOCATION1.
ENDLOOP.
SELECT OTYPE
       OBJID
       STEXT
       FROM HRP1000
       INTO TABLE IT_LSTEXT
       FOR ALL ENTRIES IN IT_LOCATION1
       WHERE OBJID = IT_LOCATION1-SOBID
          AND OTYPE = 'F'.
         AND BEGDA GE DATE-LOW
         AND ENDDA LE DATE-HIGH.
ENDFORM.                    " GET_LOCATION

My serial # is invalid I checked the redemtion code twice, same # still invalid

checked redemption code twice, serial # still invalid

ralphml
Have you read the Adobe document on Redemption Code Help
https://helpx.adobe.com/x-productkb/global/redemption-code-help.html
and, tried to contact the seller and/or Adobe about this matter?
This is not Adobe here. Rather user to user, and your matter needs Adobe and seller resolution.
Please contact Adobe as per the information in the above document and then let us know the
outcome.
Thank you.
ATR

Problem in the BDC Table Control for the T.Code VA01

Hi,
I faced probelm in the BDC of the VA01. In the Table Control
the records are entered upto 12 line items. after 13th line item overwrites the first record. How to solve the Problem.
Please help me.

or use this
Internal table definition *
data : begin of bdcdata occurs 0.
        include structure bdcdata.
data : end of bdcdata.
data: begin of messtab occurs 0.
        include structure bdcmsgcoll.
data: end of messtab.
data: v_chr_opengrp type c,
      r_matnr like mara-matnr,                       "variable for material conversion
      r_werks like marc-werks,                       "variable for plant
      v_str_fname   type string.
data: begin of count2,
      inrec(9) type n,                               " input I_MATERIAL count
      create(9) type n,                              " create count
      error(9) type n,                               " error count
      bdc(9) type n,                                 " count of BDC creates
      end of count2.
types: begin of ty_source,
partn_numb(10) type n ,"Customer Number 1
ref(035),
sales_org(4) , "Sales Organization
distr_chan(2) , "Distribution Channel
division(002), "DIVISION
doc_type(4) , "Sales Document Type
purch_no(020), "Purchase order
material like vbap-matnr,
reqqty(018),
reqdate(010),
end of ty_source,
begin of ty_header ,
partn_numb(10) ,"Customer Number 1
ref(035),
sales_org(4) , "Sales Organization
distr_chan(2) , "Distribution Channel
division(002), "DIVISION
doc_type(4) , "Sales Document Type
purch_no(020), "Purchase order
end of ty_header,
begin of ty_item,
partn_numb(10) ,"Customer Number 1
ref(035),
material like vbap-matnr,
reqqty(018),
reqdate(010),
end of ty_item.
data : msg(240) type c, " Return Message
e_rec(8) type c, " Error Records Counter
rec_no(8) type c, " Records Number Indicator
s_rec(8) type c, " Successful Records Counter
t_rec(8) type c, " Total Records Counter
v_matnr like mara-matnr.
data: val(2) type n value 01.
data : begin of bdc_itab occurs 0.
        include structure bdcdata.
data : end of bdc_itab.
data : t_source type standard table of ty_source   with header line,
t_header type standard table of ty_header initial size 1,
t_item type standard table of ty_item initial size 1,
t_target type standard table of bdcdata initial size 1.
data : w_source type ty_source,
w_source1 type ty_source,
w_header type ty_header,
w_item type ty_item,
w_target type bdcdata,
count type i,
count1 type n.
Variable Declaration
data: w_fname type string,
fnam(20),
date1(10),
i(2) type n,
v_count type i,
v_group type apqi-groupid.
*& selection screen
selection-screen :begin of block bl1 with frame title text-001.
parameters : p_fname type rlgrap-filename,                         "Input file
             p_update(1) default 'N',                              "Input for update mode
             p_bdcgrp(12) default 'SD_ORDERS'.                     "Input for session name
selection-screen end of block bl1.
**&SELECTION SCREEN VALIDATIONS
at selection-screen on value-request for p_fname.
call function 'KD_GET_FILENAME_ON_F4'
    exporting
      program_name = 'ZMATERIAL'
      dynpro_number = '1000'
      field_name    = 'P_FNAME'
    changing
      file_name     = p_fname.
*& Start of selection
start-of-selection.
if p_fname is initial.
    message i016(rp) with 'Please enter a file name'.
    leave list-processing.
else.
    move p_fname to v_str_fname.
endif.
call function 'GUI_UPLOAD'
    exporting
      filetype                = 'ASC'
      filename                = v_str_fname
      has_field_separator     = 'X'
    tables
      data_tab                = t_source
    exceptions
      file_open_error         = 1
      file_read_error         = 2
      no_batch                = 3
      gui_refuse_filetransfer = 4
      invalid_type            = 5
      no_authority            = 6
      unknown_error           = 7
      bad_data_format         = 8
      header_not_allowed      = 9
      separator_not_allowed   = 10
      header_too_long         = 11
      unknown_dp_error        = 12
      access_denied           = 13
      dp_out_of_memory        = 14
      disk_full               = 15
      dp_timeout              = 16
      others                  = 17.
if sy-subrc <> 0.
    message id sy-msgid type sy-msgty number sy-msgno
        with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
sort t_source by ref partn_numb.
loop at t_source into w_source.
    add 1 to count2-inrec.
    w_source1 = w_source.
   AT NEW PARTN_NUMB. "10/31 KVB
    at new ref.
      w_header-doc_type = w_source1-doc_type..
      w_header-sales_org = w_source1-sales_org .            "'0001'
      w_header-distr_chan = w_source1-distr_chan.           "'01'
      w_header-division = w_source1-division.               " '01'
      w_header-purch_no = w_source1-purch_no.
      w_header-partn_numb = w_source1-partn_numb.
      w_header-ref = w_source1-ref.
      append w_header to t_header.
    endat.
    w_item-partn_numb = w_source1-partn_numb.
    w_item-material = w_source1-material.
    w_item-reqqty = w_source1-reqqty.
    w_item-ref = w_source1-ref.
    w_item-reqdate = w_source1-reqdate.
    append w_item to t_item.
    clear :w_item,w_header.
endloop.
loop at t_header into w_header.
    perform bdc_dynpro      using         'SAPMV45A'                  '0101'       .
    perform bdc_field       using         'BDC_CURSOR'                'VBAK-SPART'.
    perform bdc_field       using         'BDC_OKCODE'                '/00'.
    perform bdc_field       using         'VBAK-AUART'                w_header-doc_type.
    perform bdc_field       using         'VBAK-VKORG'                w_header-sales_org.
    perform bdc_field       using         'VBAK-VTWEG'                w_header-distr_chan.
    perform bdc_field       using         'VBAK-SPART'                w_header-division.
    perform bdc_dynpro      using         'SAPMV45A'                  '4001'     .
    perform bdc_field       using         'BDC_OKCODE'                '/00'.
    perform bdc_field       using         'BDC_CURSOR'               'VBKD-BSTKD'.
    perform bdc_field       using         'VBKD-BSTKD'                w_header-purch_no.
    perform bdc_field       using         'KUWEV-KUNNR'               w_header-partn_numb.
    i = 1.
    loop at t_item into w_item where partn_numb = w_header-partn_numb
                                     and ref = w_header-ref.
      at new partn_numb.
        clear count1.
        count = 0.
      endat.
      count = count + 1.
      if count gt 5.
        clear i.
        i = 2.
        perform bdc_dynpro      using 'SAPMV45A' '4001'      .
        perform bdc_field       using 'BDC_OKCODE' '=POAN'.
      endif.
      count1 = count1 + 1.
      concatenate 'VBAP-POSNR(' i ')' into fnam.
      perform bdc_field       using fnam
                                    count1.
      concatenate 'RV45A-MABNR(' i ')' into fnam.
      perform bdc_field    using fnam                            w_item-material.
      concatenate 'RV45A-KWMENG(' i ')' into fnam.
      perform bdc_field       using fnam                        w_item-reqqty..
      concatenate 'RV45A-ETDAT(' i ')' into fnam.
      perform bdc_field       using fnam                         w_item-reqdate.
      concatenate 'VBKD-BSTKD_E(' i ')' into fnam.
      perform bdc_field       using fnam                         w_item-ref.
      i = i + 1.
      clear: w_item.
    endloop.
    clear w_header.
    perform bdc_dynpro      using 'SAPMV45A' '4001'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=SICH'.
    perform post_transaction.
    refresh bdc_itab.
    clear   bdc_itab.
endloop.
*endloop.
end-of-selection.
perform finalization.
       Start new screen                                              *
form bdc_dynpro using program dynpro.
clear bdc_itab.
bdc_itab-program = program.
bdc_itab-dynpro   = dynpro.
bdc_itab-dynbegin = 'X'.
append bdc_itab.
endform.                    "bdc_dynpro
       Insert field                                                  *
form bdc_field using fnam fval.
if fval <> ''.
    clear bdc_itab.
    bdc_itab-fnam = fnam.
    bdc_itab-fval = fval.
    append bdc_itab.
endif.
endform.                    "bdc_field
**&      Form get_filename
      text
--> p1        text
<-- p2        text
*form get_filename .
*call function 'WS_FILENAME_GET'
   exporting
     def_filename     = space
     def_path         = file
     mask             = ',.,..'
     mode             = 'N'
     title            = text-015
   importing
     filename         = file
   exceptions
     inv_winsys       = 1
     no_batch         = 2
     selection_cancel = 3
     selection_error = 4
     others           = 5.
*endform.                    " get_filename
*&      Form post_transaction
      text
--> p1        text
<-- p2        text
form post_transaction .
refresh messtab.
clear   messtab.
call transaction 'VA01' using bdc_itab
              mode   p_update
            update 'S'
          messages into messtab.
read table messtab with key msgtyp = 'E'.
if sy-subrc eq 0.
    perform process_error_messages.
    add 1 to count2-bdc.
    if v_chr_opengrp is initial.
      perform bdc_open_group.
    endif.
    call function 'BDC_INSERT'
      exporting
        tcode          = 'VA01'
      tables
        dynprotab      = bdc_itab
      exceptions
        internal_error = 1
        not_open       = 2
        queue_error    = 3
        tcode_invalid = 4
        others         = 5.
    if sy-subrc <> 0.
      case sy-subrc.
        when 1.
          write: / 'Internal error'.
        when 2.
          write: / 'Not open error'.
        when 3.
          write: / 'queue error'.
        when 4.
          write: / 'tcode invalid error'.
        when others.
          write: / 'other error'.
      endcase.
    endif.
else.
    add +1 to count2-create.
    format intensified off.
    format color col_normal.
    format color col_normal off.
endif.
clear   bdc_itab.
refresh bdc_itab.
endform.                    " post_transaction
*&      Form finalization
      text
--> p1        text
<-- p2        text
form finalization .
if v_chr_opengrp = 'X'.
    call function 'BDC_CLOSE_GROUP'
      exceptions
        not_open    = 1
        queue_error = 2
        others      = 3.
endif.
get time.
skip 2.
write: / 'Time', sy-uzeit.
skip.
format color col_total on.
write: / 'Total Records: ',           40 count2-inrec.
write: / 'PERNR not of Emp Group 6 ', 40 count2-error.
write: / 'Records Created: ',         40 count2-create.
write: / 'BDC Create in group: ',     40 count2-bdc.
if v_chr_opengrp = 'X'.
    skip 1.
    format intensified on.
    format color col_negative on.
    write: / 'PLEASE USE TRANSACTION "SM35" ',
             'TO PROCESS THE GENERATED BDC SESSION ... ',
             p_bdcgrp.
endif.
endform.                    " finalization
*&      Form bdc_open_group
      text
--> p1        text
<-- p2        text
form bdc_open_group .
call function 'BDC_OPEN_GROUP'
    exporting
      client              = sy-mandt
      group               = p_bdcgrp
      holddate            = sy-datum
      keep                = 'X'
      user                = sy-uname
    exceptions
      client_invalid      = 1
      destination_invalid = 2
      group_invalid       = 3
      group_is_locked     = 4
      holddate_invalid    = 5
      internal_error      = 6
      queue_error         = 7
      running             = 8
      system_lock_error   = 9
      user_invalid        = 10
      others              = 11.
if sy-subrc eq 0.
    v_chr_opengrp = 'X'.
endif.
endform.                    " bdc_open_group
*&      Form process_error_messages
      text
--> p1        text
<-- p2        text
form process_error_messages .
data: begin of loc_aux_message.
          include structure message.
data: end of loc_aux_message.
data : msgno type sy-msgno.
loop at messtab.
    move messtab-msgnr to msgno.
    call function 'WRITE_MESSAGE'
      exporting
        msgid = messtab-msgid
        msgno = msgno
        msgty = messtab-msgtyp
        msgv1 = messtab-msgv1
        msgv2 = messtab-msgv2
        msgv3 = messtab-msgv3
        msgv4 = messtab-msgv4
      importing
        messg = loc_aux_message
      exceptions
        others = 1.
    if sy-subrc eq 0.
      format color col_negative on.
      write: /10 loc_aux_message.
      format color col_negative off.
    else.
      format color col_negative on.
      write: /10 t_source-partn_numb.
      write: / 'Error creating message'.
      format color col_negative off.
      exit.
    endif.
endloop.
endform.                    " process_error_messages

Table to check the T.codes usage

Similar Messages

Maybe you are looking for