Table to find the interfaces for a system
Hi,
I need to find the number of inbound and outbound interfaces for a particular system.
Is there any specific table to find the total number of entries?
<b>WE20</b> is a transaction to find it out manually. But I guess there is some table where we can find it in a easier way.
Kindly reply...
Thanks!.
Hi
You need to find the Message type and IDoc types
use table <b>EDBAS</b> for IDOC types and
<b>EDMSG</b> for finding message types
<b>EDPP1</b> for all partner profiles
<b>EDP12 and EDP13</b> for inbound and outbound views
Reward points if useful
Regards
Anji
Message was edited by:
Anji Reddy Vangala
Similar Messages
-
How can I find the reason for frequent system crashes?
Hi all,
since a couple if weeks my iMac (late 2009) has a system crash at least once per day; I don't know the reason or what software causes that. How can I find the source of this crashes?
Thanks and regards
ChrisThanks for your answer.
Here the result:
EtreCheck version: 1.9.15 (52)
Report generated 27. September 2014 11:26:51 GMT+8
Hardware Information: ?
iMac (21.5-inch, Late 2009) (Verified)
iMac - model: iMac10,1
1 3.06 GHz Intel Core 2 Duo CPU: 2 cores
8 GB RAM
Video Information: ?
ATI Radeon HD 4670 - VRAM: 256 MB
iMac 1920 x 1080
System Software: ?
OS X 10.9.5 (13F34) - Uptime: 0 days 3:9:21
Disk Information: ?
ST31000528AS disk0 : (1 TB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted>: 209,7 MB
Macintosh HD (disk0s2) / [Startup]: 999,35 GB (636,04 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
OPTIARC DVD RW AD-5680H
USB Information: ?
StoreJet Transcend StoreJet Transcend 2 TB
S.M.A.R.T. Status: Verified
EFI (disk1s1) <not mounted>: 209,7 MB
Transcend (disk1s2) /Volumes/Transcend: 2 TB (1,53 TB free)
Apple Inc. Built-in iSight
Apple Internal Memory Card Reader
Apple, Inc. Keyboard Hub
Apple Inc. iPhone
Apple Inc. Apple Keyboard
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Gatekeeper: ?
Mac App Store and identified developers
Kernel Extensions: ?
[loaded] com.Cycling74.driver.Soundflower (1.5.2) Support
[loaded] com.avast.AvastFileShield (2.1.0 - SDK 10.9) Support
[loaded] com.avast.PacketForwarder (1.4 - SDK 10.9) Support
[not loaded] com.paceap.kext.pacesupport.leopard (5.9 - SDK 10.4) Support
[not loaded] com.paceap.kext.pacesupport.master (5.9 - SDK 10.6) Support
[not loaded] com.paceap.kext.pacesupport.panther (5.9 - SDK 10.3) Support
[loaded] com.paceap.kext.pacesupport.snowleopard (5.9 - SDK 10.6) Support
[not loaded] com.paceap.kext.pacesupport.tiger (5.9 - SDK 10.4) Support
[loaded] foo.tap (1.0) Support
[loaded] foo.tun (1.0) Support
Startup Items: ?
KP_IPFW: Path: /System/Library/StartupItems/KP_IPFW
Sudochmod: Path: /Library/StartupItems/Sudochmod
Launch Daemons: ?
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.avast.init.plist Support
[loaded] com.avast.uninstall.plist Support
[loaded] com.avast.update.plist Support
[loaded] com.google.keystone.daemon.plist Support
[running] com.machangout.glims.loader.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[loaded] com.oracle.java.Helper-Tool.plist Support
[loaded] com.oracle.java.JavaUpdateHelper.plist Support
[loaded] org.tcpdump.chmod_bpf.plist Support
[loaded] PACESupport.plist Support
[running] vyprvpnservice.plist Support
Launch Agents: ?
[loaded] com.avast.userinit.plist Support
[loaded] com.google.keystone.agent.plist Support
[loaded] com.hp.messagecenter.launcher.plist Support
[running] com.machangout.glims.agent.plist Support
[loaded] com.oracle.java.Java-Updater.plist Support
User Launch Agents: ?
[loaded] com.adobe.ARM.[...].plist Support
[failed] com.akamai.single-user-client.plist Support
[loaded] com.avast.home.userinit.plist Support
[running] com.google.Chrome.framework.plist Support
[loaded] com.macpaw.CleanMyMac.helperTool.plist Support
[loaded] com.macpaw.CleanMyMac.trashSizeWatcher.plist Support
[loaded] com.macpaw.CleanMyMac.volumeWatcher.plist Support
[not loaded] Verbindungsassistent
User Login Items: ?
Show Desktop
Skype
Air Media Server
TuneupMyMac
VyprVPN
Internet Plug-ins: ?
NPClientBinding: Version: 1.0.0.5 - SDK 10.6
Google Earth Web Plug-in: Version: 6.0 Support
Default Browser: Version: 537 - SDK 10.9
Flip4Mac WMV Plugin: Version: 2.3.8.1 Support
NPCleanHistory: Version: 1.0 - SDK 10.6
AdobePDFViewerNPAPI: Version: 10.1.12 Support
FlashPlayer-10.6: Version: 15.0.0.152 - SDK 10.6 Support
AmazonMP3DownloaderPlugin101749: Version: Unknown
NPSafeInput: Version: 1.0 - SDK 10.6
Flash Player: Version: 15.0.0.152 - SDK 10.6 Support
iPhotoPhotocast: Version: 7.0
NPSafeSubmit: Version: 1.0 - SDK 10.6
QuickTime Plugin: Version: 7.7.3
AdobePDFViewer: Version: 10.1.12 Support
GarminGpsControl: Version: 4.0.2.6 Beta - SDK 10.6 Support
SharePointBrowserPlugin: Version: 14.4.4 - SDK 10.6 Support
Silverlight: Version: 5.1.20913.0 - SDK 10.6 Support
JavaAppletPlugin: Version: Java 7 Update 67 Check version
Safari Extensions: ?
AdBlock
wrc (Disabled)
Download Shuttle
Audio Plug-ins: ?
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins: ?
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
User Internet Plug-ins ?
Picasa: Version: 1.0 Support
WebEx64: Version: 1.0 - SDK 10.5 Support
3rd Party Preference Panes: ?
Flash Player Support
Flip4Mac WMV Support
Java Support
MacFUSE (Tuxera) Support
Time Machine: ?
Skip System Files: NO
Mobile backups: OFF
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 930.71 GB Disk used: 338.35 GB
Destinations:
Transcend [Local] (Last used)
Total size: 2 TB
Total number of backups: 23
Oldest backup: 2014-09-12 08:28:44 +0000
Last backup: 2014-09-27 03:10:24 +0000
Size of backup disk: Adequate
Backup size 2 TB > (Disk used 338.35 GB X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU: ?
2% WindowServer
0% Microsoft Word
0% VyprVPN
0% Skype
0% hidd
Top Processes by Memory: ?
377 MB iTunes
369 MB Safari
254 MB mds_stores
180 MB com.apple.IconServicesAgent
131 MB com.avast.daemon
Virtual Memory Information: ?
2.37 GB Free RAM
3.25 GB Active RAM
1.60 GB Inactive RAM
793 MB Wired RAM
1.52 GB Page-ins
0 B Page-outs -
Where can I find the script for the sample table?
Hi,
Where can I find the script for the sample tables, like emp, dept, ... ?
Regards,
Rosalinehttp://otn.oracle.com/docs/products/oracle8i/doc_library/817_doc/appdev.817/a77069/preface.htm#420431
Hi,
Where can I find the script for the sample tables, like emp, dept, ... ?
Regards,
Rosaline -
Find the key for join between table "crhd" and "equi" for use field "answt"
I make program for read data from table "crhd" for print about machine report
but I can not find the key for link join to table "equi" for print field "answt" (acquistion value)
please help me find the key field for join between table "crhd" and "equi" for use field "answt"
thank you very much...This is how the Work Center is linked to a particular Equipment -
Functional - In IE03 ( view Equipments) You see the Work Center of a particular Equipment.
Technical - Go to view V_EQUI ( view of EQUI and EQUZ). Pass the Equipment number alongwith V_EQUI-PM_OBJTY = 'A' ( i,.e searching for the Object Type Work Center). In this way u ll get the V_EQUI-GEWRK - this is the Work Center ID.
You can pass this Work Center ID to CRHD. And you will get the Work Center text.
CRHD-OBJTY = 'A'
CRHD-OBJID = V_EQUI-GEWRK.
and u ll get the CRHD-ARBPL - this is the Work Center.
So u need to come backwards, alongwith ur CRHD-OBJTY and CRHD-OBJID , you pass the same to V_EQUI and u get the list of equipment numbers alongwith ur ANSWT(Acquisition value).
I guess it solves ur problem. -
How to find the interface with the help of target table name
Hi friends,
Whether with the help of target table name, is it possible to find the interface name that invokes this target table in ODI 11.1.1.7.
Thanks in advance.
Regards,
Sarohighlight the datastore in the navigator, expand its sub tree, there is a 'populated by' node, under the node, it will list all datastores which are used as sources to the current datastore
then expand 'used by'->interfaces, it will show all interfaces which include current datastore(but maybe current datastore is used as source)
that's all you can get from UI, otherwise I suppose you can use SDK. -
Is there any link between oe_order_headers_all and hz_cust_accounts tables. I need to find the cust_account_id for some order_number. Please help me with this
you can link
OOH.invoice_to_org_id=CUST.cust_account_id -- invoice customer
OOH.sold_to_org_id=CUST.cust_account_id -- sold to customer
OOH.ship_to_org_id=CUST.cust_account_id -- ship to customer -
PLEASE HELP ME TO FIND THE SOLUTION REGARDING "LOGICAL SYSTEM CHANGED"
HAI EVERYBODY,
PLEASE HELP ME TO FIND THE SOLUTION REGARDING "LOGICAL SYSTEM CHANGED" during the material master replication by using middleware parameters.
step1 : i have taken SRM client 810 and named it as CHINNISRM
step2 : i have taken r3 client 810 and named it as CHINNIR3
step3: During material master replication i maintained tables like crmconsum,crmrfcpar,crmparoltp in r3 and smofparsfa in srm client and filtered the objects and loaded the objects through r3ac3,r3ac1,r3as.
step4 : And later i have checked in r3 queues to activate the objects,but i have seen a message like "LOGICAL SYSTEM CHANGED:SEE 588701".according to the oss instructions i have checked in CRMPRLS table in se16 in R3 .there i found out there is one logical client named with T90CLNT810.
oss :588701
Solution
There are different cases in which different forms of processing are
required or where several options exist:
- The logical system name of an R/3 Backend client was changed in
current operation. In this case, the data hangs in the outbound
queues of the R/3 Backend system as specified under point 1 of
the symptom. In this case, the logical system name must be
changed back to the original value. Then the outbound queues
can be reactivated. If no data was transferred to the EBP/CRM
server before the change, also a correctioin of the check table
is possible.
- The same logical system name was used again in a new client of
an R/3 Backend system that was linked to the EBP/CRM server. In
this case, the data is in the inbound queue of the EBP/CRM
server with the exception GUID_FOR_LOGSYS_CHANGED. In this
case, the queue entries which have status SYSFAIL must be rejected, however, not the entire queues. If the new client of the R/3 Backend system you have linked has exactly the same
data as the old client and if it is meant to replace the old
client (that is, this was deactivated), also a correction of
the check tables is possible. In this case, the inbound queues
can be reactivated after the correction.
oss:765018
1. If the situation in your system corresponds to the situation described
under "Reason and Prerequisites" and if symptom 1 occurs, you can
delete the table entry from table CRMPRLS table (there is just one
entry). Since there is no maintenance dialog for this table and you
cannot maintain it using transaction SE16, you must use a report to
delete it. This report is attached to this note as correction
instructions.
Create the report ZZ_DELETE_CRMPRLS in your system and copy the source
code from the correction instructions. You cannot implement this
source code using transaction SNOTE.
You can use the report in every plug-in or plug-in basis system, even
if it is not specified in the validity section.
After you have run the report, you can trigger existing queues again
in transaction SMQ1.
2. If the situation in your system corresponds to the situation described
under "Reason and prerequisite" and if symptom 2 occurs, you can
delete the entry from table CRMMLSGUID (there is just one entry).
Since there is no maintenance entry for this table and you cannot
maintain it using transaction SE16, you must use a report to delete
it. This report is attached to this note as correction instructions.
If they do not yet exist, add the following messages to message class SMOF in your logon language:
Message Message short text
303 User &1 is not allowed to change table &2.
304 User &1 IS not allowed to display table &2.
305 Logical system &1 was not found in table &2.
306 System error! The current client was not
found in table T000.
Create the report ZZ_DELETE_CRMMLSGUID in your system and copy the
source code from the correction instructions. You cannot implement
this source code using transaction SNOTE.
You can use the report for every release of the CRM system, even if it
is not specified in the validity section. The only exceptions are CRM
releases with Support Package versions that are too low such as CRM
Release 3.0 with Support Package 12.
After you have run the report, you can trigger existing queues again
in transaction SMQ1 of the R/3 back-end system or transaction SMQ2 of
the CRM system.
so what should i do to do the replication.please suggest me .untill and unless i solve my problem i cant move to the further activity.i hope you people can solve my problem.thanks in advance.
thanks and best regards,
n.chakradharHi chakradhar,
Did you find a solution to your issue? We are facing a similar issue and looking to figure out how this can be resolved.
BR// 420 -
IDoc Status 02 ( Could not find code page for receiving system )
Hi All,
I am getting Idoc status 02 when I am trying to send IDocs from ECC to PI system ( Production ).
Error description.
Could not find code page for receiving system
Message no. E0266
Diagnosis
For the logical destination PIP001, you want to determine the code page in which the data is sent with RFC. However, this is not currently possible, and the IDoc cannot yet be dispatched.
Procedure for System Administration
Possible causes are:
1. The entry no longer exists in the table of logical destinations.
2. The target system could not be accessed at runtime.
3. The logon language is not installed in the target system.
4. In the destination system, no logon language is maintained
Please help.
Thanks - Vinay.Hi Vinay,
Status 02 occurs when data is not passed to port suceessfully. Check the RFC desination is working fine and your able to connect to target system and also check correct port is assigned.
Regards,
Vinod. -
How to find the Version of CRM system
Hi All,
I have to install CRM system and I dont have any other information other than the EWA Report, Can any one let me know how to find the Version of CRM system and we dont have Java installed in it (Generally we check WEBCUIF but as we dont have Java I cannot see the Package). Can I go with the CRMUIF ?? .
I have Pasted the information of Support Package Maintenance, that is available in EWA Report.
BBPCRM
600
4
13
SAP BBPCRM Server
CRMUIF
600
4
17
SAPK-60004INCRMUIF
SAP CRM User Interface Framework
PI_BASIS
2005_1_700
16
26
SAP R/3 Basis Plug-In
SAP_ABA
700
16
29
SAP Application Basis
SAP_AP
700
13
29
SAP_BASIS
700
16
29
SAP Basis Component
SAP_BW
700
18
31
SAP Business Information Warehouse
ST-A/PI
01P_700
0
SAPKITAB7I
SAP Service Tools for Applications Plug-In
ST-PI
2008_1_700
6
8
SAP Solution Tools Plug-In
Please let me Know. Thanks in Advance.
VijayHi,
Logically your Status bar should show that.
Login to gui. --> system -> Status
and then you should see the crm version in your Component version.
SAP CRM ABAP 6.0
You should go with
BBPCRM
600
Thanks
Rishi abrol -
Concurrent Manager cannot find error description for CONC-System Node
Hi friends,
I m facing a problem while doing clustering for oracle EBS.i m using hpux11i with veritas cluster server for oracle DataBase cluster.i am doing 2 node cluster.i have installed oracle 11i apps with 9i DB.thru veritas i am able to do a db cluster failover.now i want to run oracle apps 11i too from both nodes(active/passive).so i configured a virtual IP address with a Virtual Hostname which will move along with the cluster failover.when i configure ora apps tier thru giving it virtual hostname concurrent manager dies with error--Concurrent Manager cannot find error description for CONC-System Node. i tried many things but unable to come up with a solution. pls help.
regs
SatishPlease post the contents of your hosts file here.
Is FND_NODES table populated correctly? Please run AutoConfig and make sure it completes successfully.
Why are the Concurrent Managers Failing with 'CONC-System Node Name not Registered" Error After Applying Patch 6461517? [ID 1108452.1]
OPP and SFM Managers do not Start [ID 1425409.1]
Thanks,
Hussein -
Infopackage Idocs in status 2 - could not find code page for receiver system
Hi,
We just migrated our production system from BW 7.01 non unicode to BW 7.4 on HANA.
We now encounter issues with idocs while loading data into bw from our ECC5 source. When we analyze idocs in the source system it appears with the message "could not find code page for receiver system"
One weird thing is that the idoc seems to have been created before we started the infopackage in bw.. We controlled system time and AS time and everything seems ok.
We did not encounter this issues on our previous migration test runs..
Hope someone can help
ChristopheHi,
Thanks for responding. We finally found out what the problem was.
We have two applications servers on our ECC with 2 different OS. One of them could not reach the new BW HANA server.
Regards
Christophe -
Safari and firefox 'cannot find the server' for every other page that i navigate to, unless I turn Wifi off and on. Once i reconnect to the network, the page loads, but after loading a few more pages, the same thing happens all over again.
This happens each and every time, on different Wifi networks, in different locations. On the other hand, I don't ever encounter this problem when I tether my laptop to my mobile phone's 3g/2g network using Personal Hotspot. How do I fix this?Try this DNS server ...
Open System Preferences > Network > Advanced > DNS
Click + and type:
208.67.222.222
Click + again and do the same.
208.67.220.220
Click OK.
Quit and relaunch both your browsers to test.
If that doesn't help, try here > iOS: Troubleshooting Wi-Fi networks and connections
And here > Wi-Fi: How to troubleshoot Wi-Fi connectivity -
Idoc Error: Could not find code page for receiving system
hi,
I am facing the following error while processing Idocs.
ERROR: Could not find code page for receiving system
Diagnosis
For the logical destination BWFIN, you want to determine the code page in which the data is sent with RFC. However, this is not currently possible, and the IDoc cannot yet be dispatched.
Can somebody suggest a solution for this. I have verified that the RFC destinations have been created both on the sender and receiver, ports (WE21) have been defined, and partner profiles (WE20) also created. How would I troubleshoot this problem?Hi,
I did analyse on this issue.It is all because of the Langauge settings in the SM59.This can be done by the BASIS person.The Language field would be empty, but when ever we send the IDoc from the unicode to a non unicode system we have to mention the Langauage used.
If this helps you really award me the points.
~Katty -
Idoc failed in Bi system "Could not find code page for receiving system".
Dear Experts,
i am getting below error ,Idoc failed in Bi system "Could not find code page for receiving system".
All the idocs have been successfully posted except one which is giving this error
Idoc status 02 - could not find code page for receiver system.
Please guide me
thanks
vamsiHello Vamsi,
check Note 647495 - RFC for Unicode ./. non-Unicode Connections
If your ERP system sends e. g. chinese data to the SCM system, how should the system know which codepage to use? You have to set the MDMP flag in your ERP system in SM59 and configure in the MDMP extended settings which codepage should be used for what language.
Please check this thread - IDoc error - Could not find code page for receiving system
Hope it helps,
Thanks & Regards,
Amit Barnawal -
RFC metadata import error - Couldnu0092t find the branch for version with id
Hi All,
When re-importing RFC meta-data, system returned following error message <i>Couldnt find the branch for version with id = <version id></i>
I am not able to delete the existing (already imported) RFC meta-data. However, I am able to import the same RFC into a different Software Component.
The error is described in SAP note 710998, unfortunately, this note only references XI 2.0
Is there anyway other than these-
1) Deleting a new SWCV and importing it and then import the RFC and make Release transfer from new SWCV to Old SWCV. If so, is there any impact on my QA systems and Productions systems during transport.
2) Deleting the existing SWC and Reimporting from SLD and trying to import the RFC again and redoing all the design
3) Exporting the current SWC and deleting it and importing the same file and then trying out the RFC import.
These options I just thought as an workaround solutions. Because i am not able to try these, as i don't have any test systems for this. Let me know any suggestions on these.
Thanks in advance,
Regards,
MoorthyYes, the used structures were imported from an old XI system. But I created the mapping new on the PI and put the used externel definitions manually to the mapping. That worked fine but now everytime when saving the mapping this error occurs. Btw both structures are used in other mappings, too, and they can be modified without any problems.
Which jdk version do you mean? Client or server?
Regards.
Oliver.
Maybe you are looking for
-
Hi all. Ive just got a new Pc about a week ago now. DVI to HDMI and DVI to RGB works but when i put HDMI to HDMI in no picture comes on. When i use the HDMI to HDMI lead in the graphic card to the TV nothing comes on the TV when i switched the PC on
-
IPhone 4 iOS7: Playing music over bluetooth, short dropout during mp3-id-transfer
After upgrading my iPhone 4 to iOS7, i have a little problem with the music-player. I use it, playing music in my car over Bluetooth. Everytime a new song starts, I have a short dropout while my iPhone transfers the MP3 tag to my car's soundsystem. I
-
I have this funny feeling that NTFS is required for the latest Quicktime/iTunes. It's not stated in the system requirements, but I just have this feeling. If anybody has successfully installed the latest Quicktime/iTunes on a FAT32 partition with Win
-
Internal credit memo generating COPA document
Hi, We have created one intercompany billing document(IV) and see that there are no COPA document generated. But when we did the Internal credit memo(IG) for the same, it is generating COPA document. When intercompagny invoice(IV) is NOT PASSED
-
Certain videos don't have vision
I'm using the website www.ipl20.com for the indian cricket and most of the videos don't play properly. They have sound but no vision. I am using Firefox 28.0 with Win 8.1. All add-ins are disabled. Plug ins installed for Quicktime, Real Player, Shock