Table to find Transport import time

Dear Friends,
I would like to know the table in which the transport import start time and end times are maintained.
Regards,
Ramakrishna

Hi,
You can find that entries in E07* tables.
CLcik on that particluar request,,
See if that helps u
Best Regards,
VVenkat..

Similar Messages

Transport import time

I need some help on analyzing the transports. The situation here is that we have say about 500 transports that were imported into test system and took about 24 hrs. Now we want to import those transports into another system but to improve import duration, my boss wants me to prepare a list of objects in these tranports, recreate new transports (and include objects repeating in multiple transports into one transport request) and import them thereby reducing the number of transports to import from 500 to say about 400.
Can any of you help me how to get this information. Table E070 and E071 will provide the necessary list of objects in each transport request. But is there any other fast process to get this information.
Also can someone please let me know how can I find the total duration these 500 transports took to import in test system. Is this information also stored somewhere table/import history?

Hi,
You can club some of the similar transport requests into one common transport request.
i.e Transport of copies.
http://help.sap.com/saphelp_47x200/helpdata/en/57/38e1a94eb711d182bf0000e829fbfe/frameset.htm
Regards,
Siddhesh
Message was edited by:
Siddhesh Ghag

Tables to find Transport Requested Released, Transported?

Dear all
I am using STMS and Se10 to check which of my Transport Requests have been transported from
1. Golden Client go to 2. QAS, and then from 2. QAS goes to 3. Production.
Please advise.
Thanks

Hello,
You can use import histroty in the STMS or stms_import. It shows all the details.
Regards,
Gowrinadh

How do I find who imported a transport request

Hello
How do I find who imported a transport request

Hello,
1) Go to transport history or SE09 --> F5 in target system and find out what time your change imported to target system.
2) now you need to find who did this and you can go to STMS_IMPORT on target system and look for transport monitor SLOG and match with timings. (you will find slog info at the same place at import monitor)
There was one time I have experienced mass import was done by a learner and I could able to go back and find the info by matching with SLOG, STMS_HISTORY, STAD.
Thanks,
Vasanth

How to find out insertion time of records in an oracle table

Hi everybody,
I have a table with about 50,000 records in my Oracle database and there is a date column which shows the date that each record get inserted to the table, for example 04-Aug-13.
Is there any way that I can find out what time each record has been inserted?
For example: 04-Aug-13 4:20:00 PM. (For my existing records not future ones)
I searched over the internet and find some results but none of them seem to be practical.
Thanks for your help.

I have a table with about 50,000 records in my Oracle database and there is a date column which shows the date that each record get inserted to the table, for example 04-Aug-13.
Is there any way that I can find out what time each record has been inserted?
For example: 04-Aug-13 4:20:00 PM. (For my existing records not future ones)
First you need to clarify what you mean by 'the date that each record get inserted'. A row is not permanent and visible to other sessions until it has been COMMITTED and that commit may happen seconds, minutes, hours or even days AFTER a user actually creates the row and puts a date in your 'date column'.
Second - your date column, and ALL date columns, includes a time component. So just query your date column for the time.
The only way that time value will be incorrect is if you did something silly like TRUNC(myDate) when you inserted the value. That would use a time component of 00:00:00 and destroy the actual time.

How to find out important fields in table like MARA?

How to find out important fields in a table for example like MARA?
Details: In R/3 or ECC table for example MARA;
1) How to find out what are the important fields?
2)Does the table have only key figures not characteristics right?
3) There are so many tables in FI; Can you please tell me what are the important tables?
4) There is any easy automatic way to figure out that the particular datasource for example 2lis_02_item is pulling data from so and so table. I like to know the process not the results please.
Thanks in advance.
York.

Hi York,
Let me go by points:
1. There is nothing like important fields ... The question could be Key fields ... the fields which identify a record uniquely ... If you go to SE11, and go inot the dispaly of MARA table ... you will see that there is tick mark under key to indicate that the field is a key field ... All the fields which are so marked would identify a record in the table uniquely. If your question is otherwise ... (Important fields) ... then it depends on the purpose you wnat to meet ... Some fields might be important for me but not for you ... so there is not hard nad fast rule for important fields.
2. No... Tables in R/3 or ECC would contain both Key figures and characteristics.
3. Important tables in FI would be BKPF, BSEG and BSET.
4. The procedure for finding out which table are used by say 2lis_02_item would be different from that of other non LO/LIS extractors.
In case of LO/LIS turn on the trace (below process) while populating the setup tables and for thoers while executing RSA3.
1. Open one session and go to ST05, click on "Activate Trace"
2. Open another session and execute the transaction you want to track for the tables it is going to hit.
3. Go to the session of point 1 above and click on DEACTIVATE TRACE
4. Click on DISPLAY Trace
This will show you all the tables that were hit while extracting data. Point to remember here is ... it will hit some standard tables as well ... so you will have to filter out what is relevant from what is not.
Hope this helps.
best regards,
Kazmi

Can't find last import from iPhone! Noticed as I imported I had that view where there was only one project symbol, not all my projects showing by date, but even so pictures were imported. It took the time to do them, so where

Can't find last import from iPhone!
Noticed as I imported I had that view where there was only one project symbol, not all my projects showing by date, but even so pictures were imported. It took the time to do them, so where aare they? I have closed and restarted to get back fll view of all dated projects, but nothing can be found from today...

have i posted it right...?? no response from apple guys...

HT201250 I accidentally deleted an important note on my iPhone. Can I find it in Time Machine?

I accidently deleted an important note on my iphone. Can I find it on Time Machine?

If you have Time Machine connected you should be able to.
VK replied to a similar question here ...
Start Mail and open the Notes mailbox. click on TM in the dock, scroll back in time in the Mail window, select the note you deleted and hit 'restore".

Table that stores Transport Request Details

Hi SDN Gurus,
Is there any table that stores all the details of all the transports in Import Queue (STMS). I am mainly interested in import time and method execution time of the transport. I need to write an ABAP program that for calculating the time for mass migrating all the transports in the queue.
i looked at the tables E070, E071 and some others but din't get the required info.
Any help will be rewarded with points.
Thanks

Here is some correction to what i said. i got some information like the transport number, owner of the transport, target system and the IMPORT time of the request from the table E070. i guess all i need now is to find the time at which the transport is completed (Method Execution time) so i can calculate the time it took for transport.
Thanks

Transport Import Date

Hi guys,
Is there a table in which I can find the import date of a transport or is just stored in a log file?
Thanks,
Raulie

Hi Raulie,
I think it's just in the log file. Use TR_READ_GLOBAL_INFO_OF_REQUEST function module to read it.
Best regards.
Sandra

Table.rows.find() returns null in a table where the row exists.

Hi...
I am working in a Project in Visual Studio 2013 where I have to read an Excel report related with a list of business opportunities. Some of the Fields that are involved in it are: Opportunity ID, BU, Account, close date, Account Manager,
Total Value and so on. As soon as I get the conection with the Excel Report, I fill a DataTable and declare the columns [Opportunity ID] and [BU] as my Primary Keys. In that way, an Opportunity value may have one o more rows
with different BU code each of them. In consequence, you can define one row in the table if you specify the [Opportunity ID] and the [BU] values.
My problem starts when I try to get information of those rows that have an specific value of [Opportunity ID]. For that situation I make a "foreach" structure where I check the BU codes that are involved with that Opportunity. So
I use the Find() Method to get the information of the row specified by the Opportunity ID and BU. The first time it goes to find the information it gets the results successfully but in the next cycle changing just the [BU] using the same [Opportunity
ID] value, the find() method returns a "null" and I do not know why because I am sure that the row exists in the table. I have verified the "Unique" property for the [Opportunity ID] and [BU] columns (which are
my primary keys) and they are in false which is OK.
I share the code that I am using...
Hope someone can help.
Thanks.
Alfmar.
void ObtenTotalesxBUs(string Opportunity, string[] BUs, Object[] TotalBUs, Object[] ExpTotalBUs)
ArrayList TotalesBUs = new ArrayList(); //Required information from the row.
ArrayList ExpTotalesBUs = new ArrayList(); //Required information from the row.
foreach(string businessUnit in BUs)
Object[] LlaveBusqueda = { Opportunity, businessUnit }; //Provide values to the Primary Keys.
DataRow RenglonInfo = null;
RenglonInfo = TablaFunnel.Tabla.Rows.Find(LlaveBusqueda); //Find method receives the Primary Keys values. Here is where I have a "null" in return the second time changing just the [BU] field.
TotalesBUs.Add(RenglonInfo["Total"]); //Get the required information from the row.
ExpTotalesBUs.Add(RenglonInfo["Expected Total Value"]); //Get the required information from the row.
TotalBUs = TotalesBUs.ToArray();
ExpTotalBUs = ExpTotalesBUs.ToArray();}

Hi Viorel..
Thanks a lot for you help.
I am absolutely sure that the second ítem of BU is valid and exist in the table because I tried to make a "Select" statement in the table providing the values of [Opportunity ID] and [BU] and I get the expected record. So, why is not
working using Find() with the defined Primary Keys???
I tried this in order to test that the record exists...
if(RenglonInfo == null)
string strSelect = "[Opportunity ID] = '0000218256' AND [BU] = 'SFW'";
RenglonInfo2 = TablaFunnel.Tabla.Select(strSelect);

Transport import quue

Hi everybody,
I'm experiencing a problem with transport import queue. So I hope somebody have an idée whats wrong. When I make a transport on DEV, it appears in de import queue (I can see it in SAP and on OS level). After I refresh the import queue I still can see my transport on the OS level but it disappears in SAP.
The same happened when I tried with tp addtobuffer.. In the Import Overview screen I see that my transport is added to the queue. But when I go to Import Queue screen I got message that import queue is empty.
Strange is that I dont get any error messages and in all log files I dont see any errors.
Any ideas?

Hello Mustafa,
Can be an issue with mounts as well as file permissions as has been pointed out already to you.
Please check both the things.
Best thing is logon into QAS system and go to AL11. Then go to /usr/sap/trans/data and /usr/sap/trans/cofile directories and check if you can find the data files and co files for the transports. If you are able to find then check if you are able to read the contents. If you can not find the files or are not able to read the contents then it is an issue with file permissions or mount.
Regards.
Ruchit.

Final Cut Pro X/Canon Vixia Import Time Different

Hi,
I have an annoying issue that I have not been able to figure out. I use a Canon Vixia M41 camera to record family videos in AVCHD. I usually import them directly off the card into Final Cut Pro X by first making an archive to store on another hard drive, and then import the actual clips into the library.
Everything works fine and seems to have been working fine for a while, but I recently noticed that my import time on all of my clips is off an hour. Now, I first thought, okay, daylight savings time, so I went into my camera and checked the time and date settings. I manually adjust for daylight savings time, so I do not have anything in the camera making the DST change automatically.
When I looked in the camera, the date and time are perfect. When I look at the clips on the card and click to play them back on the actual camera, the date and time are perfect there too; however, when I import those clips into Final Cut, the time on all of them are off by one hour. They are ahead an hour, so instead of 5 am, it's 6 am.
I know I can adjust the time in Final Cut, but I would like to know why the time is right on the camera and the clips on the camera, but import wrong when brought into Final Cut. I don't want to have to always check to adjust everything I bring into the application.
Any ideas? I am willing to test out anything. I have also noticed that it has been doing this for a while now and I didn't notice.
Thanks!
Using Final Cut Pro 10.1.1 on 2009 Mac Pro (Nehalem) on OS 10.9.3
Canon Vixia M41 recording AVCHD

I've been running FCPX from version 10.0.1 up to the latest, and I spent some time puzzling why the time on imported files from my Panasonic SD700 were always an hour out. I tried several experiments setting the daylight savings on or off and adjusting the set time on the camera but FCPX always got it 1 hour wrong. This was despite the fact that the date/time on the raw video file in Finder was correct.
In the end I just had to accept that it was always going to be an hour out and either set the camera clock 1 hour back or take a short clip of the time on my phone so I could batch adjust the clips later! I can only assume FCPX gets its time from the metadata in the file structure and that some manufacturers' implementations confuse it!

Sudden increase in import time

On 9/6 I refreshed my database by exporting level 0 information,resetting the database, and importing the data back in. Theimport took 984 seconds. On 9/19, I performed the exact sameprocedure, and the import took 5,838 seconds. While I hadadded some dimension members in the meanwhile, as well as somedata, I can't see anything that would account for such a drasticincrease in import time. The size of the file on 9/6 was1,032,616 kb, and the file on 9/19 was 1,072,413 - not a bigdifference. Statistics on 9/6-------Statistics of Birdseye<img src="i/expressions/face-icon-small-tongue.gif" border="0">lan1 ------- Dimension Name Type Declared Size Actual Size =================================================================== Accounts DENSE 2431 2254 Time Periods DENSE 23 14 Data Type SPARSE 8 8 Scenarios SPARSE 25 25 Versions SPARSE 5 5 Years SPARSE 7 7 Customer SPARSE 3281 2412 Product SPARSE 10786 10657 Commodity SPARSE 122 122 Dry - Frozen SPARSE 5 5 Family SPARSE 149 149 Label SPARSE 486 486 Number of dimensions : 12 Declared Block Size : 55913 Actual Block Size : 31556 Declared Maximum Blocks : 247722062000 Actual Maximum Blocks : 179932788000 Number of Non Missing Leaf Blocks : 373943 Number of Non Missing Non Leaf Blocks : 385909 Number of Total Blocks : 759852 Index Type : B+ TREE Average Block Density : 0.2448663 Average Sparse Density : 0.0004222977 Block Compression Ratio : 0.01842294 Average Clustering Ratio : 0.5076456 Average Fragmentation Quotient : 7.292331 Statistics on 9/19-------Statistics of Birdseye<img src="i/expressions/face-icon-small-tongue.gif" border="0">lan1 ------- Dimension Name Type Declared Size Actual Size =================================================================== Accounts DENSE 2431 2254 Time Periods DENSE 23 14 Data Type SPARSE 13 13 Scenarios SPARSE 25 25 Versions SPARSE 5 5 Years SPARSE 7 7 Customer SPARSE 3284 2414 Product SPARSE 10804 10660 Commodity SPARSE 122 122 Dry - Frozen SPARSE 5 5 Family SPARSE 149 149 Label SPARSE 486 486 Number of dimensions : 12 Declared Block Size : 55913 Actual Block Size : 31556 Declared Maximum Blocks : 403588822000 Actual Maximum Blocks : 292715605000 Number of Non Missing Leaf Blocks : 401337 Number of Non Missing Non Leaf Blocks : 437215 Number of Total Blocks : 838552 Index Type : B+ TREE Average Block Density : 0.2189758 Average Sparse Density : 0.0002864733 Block Compression Ratio : 0.01815302 Average Clustering Ratio : 0.5888489 Average Fragmentation Quotient : 3.811463 Any help would be greatly appreciated.

Looking at your statistics there is an increase in the dimensiion members, but that should NOT account for such a massive increase in loading time. 1.5 hours is just wrong.... Unless there is a problem in your database. Try validating it just to make sure that it is ok. On a different tack, it would be worth checking the network traffic and the job log to see whether there was anything else running that may have caused this to go slow. If you can't find anything, make a copy, and then try it on the copy, just to se if it was a 1 off issue, or if it is taking so long...

Note:304522.1 How to Move Queue Tables without using export import

Trying to use the pkg available in Metalink "Note:304522.1 How to Move Queue Tables without using export import"
Using the 10.1.0.x and upwards Package, I'm getting the following error on a single consumer queue table with an xmltype payload:
SQL> exec move_aqt.move('XFORM_TEST_INT','INTERFACE_XML_QUEUE','SMALLBLOCK');
BEGIN move_aqt.move('XFORM_TEST_INT','INTERFACE_XML_QUEUE','SMALLBLOCK'); END;
ERROR at line 1:
ORA-20000: ORA-06502: PL/SQL: numeric or value error
ORA-06512: at "SYS.MOVE_AQT", line 652
ORA-06512: at line 1
We've tried in multiple environments, always with the same results.
Trace file shows:
*** 2006-11-08 10:06:47.154
*** SERVICE NAME:(SYS$USERS) 2006-11-08 10:06:47.147
*** SESSION ID:(379.954) 2006-11-08 10:06:47.147
qtable move procedure starting execution at 08-11-2006 10:06:47 for queue table XFORM_TEST_INT.INTERFACE_XML_QUEUE
qtable move procedure experienced an exception at 08-11-2006 10:06:47
qtable move error message ORA-06502: PL/SQL: numeric or value error
qtable move procedure ended execution at 08-11-2006 10:06:47
Can anyone help with this? Has anyone used this before successfully (or not successfully). We urgently need this working today to test moving our queue table into a tablespace with a smaller block size for performance reasons in production.
Thanks for the help!
Tony

Thank you,
Yes we've done that. They've confirmed a problem with the links/scripts on the note. The 10.1 and up version was not really 10.1 and up.
As they would not have a new version available in time for the move we needed to perform, we switched our approach to using dbms_redefinition instead.
Thanks for the reply,
Tony

Table to find Transport import time

Similar Messages

Maybe you are looking for