Table to see Inspection result recording

Mentors
We have material where in there are intermittenat 60 operations to be recorded based on 3 stages of the meterial .All the operations have single characteristic value .Results are recored for the lots whcih are created based on the stage
1) For stage new arrival result recodering is done for 10-25 operations
2) Dispute stage result recodering is done for 31-46 operations
3) Recycle stage result recodering is done for 50-66 operations
now i want to know How to check in which of the operation , results are recorded in table ? ( Table sequence to derive values stored for the results for the operations )

Hi,
Check in the following tables.
QAES  :                        Sample unit table
QASR  :                        Sample results for inspection characteristic
QAMV :                        Characteristic specifications for inspectic
QAPP  :                          Inspection point.
Regards
Ravi Shankar.

Similar Messages

  • Inprocess Inspection & result recording

    Hi all,
    We are implementing QM.
    The requirement of client is to carry out inprocess inspection(preferable without inspection plan) including result recording & defect recording & that to with quiet ease.
    Help me with the basic settings.
    Also to have the relevant report to analyse the inspection activities.
    We are using developed T code for operation confirmation, in the back end it is co11n only. So also elaborate the consequences of the same if any.
    Mangesh

    Ramanuj/ Murali,
    Thanks for your reply.
    Let me explain the process in details.
    We are having around 10 operations.
    We need to carry out inprocess inspection for 8 operation starting from 3rd operation.
    The inspection to be carried out is like length- 5 cms, shape- ok or not ok, if not ok then what is the defect, assay- 90%, if below 90% then defective like this.
    I have assigned inspection type 03 in QM view in the material master.
    Inspection lot is also getting created.
    I am stuck up at result recording & defect recording.
    So kindly guide me how to map this in details.
    Efforts would be appreciated.
    SmanS

  • FM for Quality Inspection Results Recording.

    Hello!
    I was wondering if someone can help me out on this one:
    The requirement calls for entering the same set of results for several inspection lots.  Short of using batch input, is there a function module that can enter the results of an inspection lot?
    Thanks in advance.  Points for anyone who can give helpful answers...

    Hi Vidhya,
                     Can you please elucidate the isuue a bit more in detail........ in which tab during result recording you are trying to attach file......So I can help with what ever little I know in SAP...........
    Regards
    Kaushik

  • Need custome program for qe51n (inspection result recording)

    Hi Gurus,
    I am getting the same error from the BAPI  BAPI_INSPOPER_RECORDRESULTS. Defects occured during confirmatio  you find any solution? If yes please share me the solution and sample code give some ssample code .
    Javed
    Edited by: Javed Parvez on Jun 8, 2009 2:58 PM

    Dear Neeraj
    one suggestion would be create an qualitative MIC and give the short text " Inspection according to Drawing specification". Create a characteristic code as 1) Ok 2) Not ok. So while result recording you select ok or not ok according to the result and in Inspection Decription you can insert your comments
    Regards
    gajesh

  • Quality inspection result recording thru LSMW

    Dear All,
    I donot have any idea of LSMW.
    We have requirement of upload result data which are maintained in EXCEL.
    I gone thru document of LSMW available on NET.
    Can any one guide me step-by-step procedure for the same or can share good document.
    Thanks in advance,
    Nirav

    Hi,
    Pl go through the below documents.
    [LSMW|https://docs.google.com/viewer?a=v&pid=explorer&chrome=true&srcid=0Bw3TmL29DWuPNzQ5OTU1ZTYtNTllMC00OTE1LWE5YWMtYTBlYWUxMTk5Nzgz&hl=en&authkey=CNDa2_0G]
    Arun

  • QM inspection result reports

    Experts,
    How come there is never any data for QM reports such as MCXA, MCXB, MCXD, MCXI although inspection lots are available in the system?
    Is there another report that I can use to see inspection results in a table layout, e.g. list of batches on one axis, list of characteristics on another and the results?
    Thanks!
    Rgds

    Sure you can.  Simply add some of the standard characteristics to the batch class that SAP provides.
    LOBM_APO_SL_MAX     Max shelf life/maturity in sec
    LOBM_APO_SL_MIN     Min shelf life/maturity in sec
    LOBM_APO_SL_UTC     Reference time stamp of batch
    LOBM_BPRIO     Stock determination: priority
    LOBM_BWTAR     Valuation type
    LOBM_HERKL     Country of Origin
    LOBM_HSDAT     Date when batch was produced
    LOBM_KRT     waiting period of a batch
    LOBM_LFDAT     Batch determin. delivery date
    LOBM_LGORT     Storage location
    LOBM_LVORM     Deletion ind. for batches
    LOBM_MBDAT     Material availability date
    LOBM_MENGE     Batch determination sort qty
    LOBM_QNDAT     Next insp. date for batch
    LOBM_QSCORE     Qualityscore Usage Decision
    LOBM_RLZ     Remaining shelf life for batch
    LOBM_RLZ_PROZ     Req. remaining rntme in proc.
    LOBM_UDCODE     Usage Decision
    LOBM_VERAB     Availability date
    LOBM_VFDAT     Expiration date, shelf life
    LOBM_ZUSTD     Status of batch
    Not all of these are suitable to add to the batch class.  Some are designed strictly for batch search strategy classes.  There are several OSS notes out there on the use of these.  As you can see, several of these are date related.  I usually always add LOBM_HSDAT, LOBM_UDCODE,and LOBM_VFDAT.
    As you can see, the Batch number is not in the list of standard characteristics.  This can be created however.  Create a general characteristic with reference to table MCH1, field nanme CHARG and add this characteristic to your classes.  You can then use it to search and sort for specific batches just like any other characeristic in CL30n.  When displayed, the field is greyed out from user entry since it is a referenced field.
    Craig

  • Result Recording QA32

    Dear Experts,
    In QA32 when we want to enter result for particular inspection lot, there is column for result and original value, whenever a user enter some values in the result text field, the original value column automatically inserted.
    My questions are:
    1. I found some inspection lots that had all the result value filled in but the original values are blank, what may caused this situation?
    assuming that the original values are updated automatically each time the result columns are filled in.
    2. Where do I found the table column to store this result field? because I can't find it in QASR or in QAMR tables.
    Please help, any help will be highly appreciated.
    Sincerely,
    Sammy

    Hi
    Original Value Before Input Processing
    In this field, the system saves the original value that was actually entered during results recording. Attributes that may have been entered are also saved (for
    Means
    1.suppose you entered 10.200 value but the data you have maintained allows you to only aceept 10.2 as a vlaue.
    then Measured value: 10.2 & Original value will be :10.200
    Original Value : This is what you have entered during result recording.
    2.
    Results Recording QAKL Results table for value classes
    Results Recording QAMR Characteristic results during inspection processing
    Results Recording QAMV Characteristic specifications for inspection processing
    Results Recording QASE Results table for the sample unit
    Results Recording QASR Sample results for inspection characteristics
    Results Recording QASV Sample specifications for inspection processing
    Regards
    Sujit

  • Inspection results for more than one lot

    How do i see inspection results for different lots of the same material together in a single screen. Is there any standard report or query available in SAP?
    Prahlad

    Dear Prahlad
    You can see it in ways
    1) Go to QS28. Input the plant and the mic and execute. You will get MIC details. Choose the MIC and click on Result history. A pop will appear Result history Limit Selection. In the Time Tab you can see inspection lot selection date From and To. Execute you will get the entire list of lots
    3) Go to QA33 > result> Select the Mic> go Result historyhistory >In the Time Tab you can see inspection lot selection date From and To. Execute you will get the entire list of lots with all values and charts
    4) standard reports such MCXD,QGP1 can be used
    Hope this helps
    Regards
    gajesh

  • Results recording tab not appearing in QA32

    hi,
    can anyone tell me why results tab not appearing in QA32 , is there any authorisation missing?

    Just check which roles are added to that used id
    selec 1 role that is relevent to inspection (result recording) and add QE01 t_code in that role.
    take help from ur basis guy for this.

  • Table for Original Values in Results Recording

    Hi,
    Where are the original values of the results recording of the inspection lot (inspection type 04) stored?
    Or, is there any function module to fetch this data?
    Regards
    Ramakanth

    it's in table QASE
    original value (Data Element- QORIGINAL_INPUT )

  • Requirement of displaying inspection method in result recording

    Dear All,
    My clients requirement is to have the inspection method code in the result recording screen. I have the option of inspection method short text in the result recording screen. But i want a code should appear so that user can see the same for his convinient reference.
    Regards,
    Anil

    Dear Anil,
    You can create attachment in word of whatever data you want to maintain for inspection method. you can also save drawings in this attachment. assign this attachment to inspection method .You can assign attachment by
    Service for Object=> Create=>Create Attachment
    Now this attachment u can view while doing result recording & parallaly u can record results. Hope this will help you.
    Regards
    Amit

  • What is table for results field in results recording

    Dear all,
    Please tell me the  table for the results in results recording .
    Thanx in advance.
    Regards
    Srinivas

    Hi,
    QAMR                             Characteristic results during inspection processing
                                                                                    QASE                             Results table for the sample unit                                                                               
    QASR                             Sample results for inspection characteristics                                                                               
    Regards
    Mangal

  • Result recording to be done after UD with long term inspection

    Dear All
    I have activated two MIC's for long term inspection. Inspection lot is created and UD is provided after Result recording. i have run QA12 and go to EDIT/RESET/INSPECTION COMPLETION.  status of UD changed to LTIN and then in Qe51 / qe51n i selected long term inspection but error message is coming '' NO CHARACTERISTICS WERE FOUND". Plz help , how to do result recording after UD.

    Dear Even if the char is long terms & if you have forcefully completed the chars then even if char has LTIN status it will not allow you.
    But check this in your sandbox and revert.
    1. In the MIC set the 'Optional Characteristic' and 'Long tem inspection ' in the control indiactors.
    2. Attach MIC in inspection Plan
    3. Do results recording and comlpete UD. all short term charactericts are closed.
    4. QA12Change UD with history for Inspection Lot ,
    Menu-> Reset inspection completion -> Status changes to LTIN
    5. Goto QA02 --> you woudl see " do you wnat to compete Long term inspections" --> yes
    6. Then Long term inspection characterictic is open for results recording.
    7. Change and complete results --> Make UD
    Check and Revert.
    Cheers
    KK

  • Result Recording Specification field Table entry

    Hi SAP QM Gurus!
    In QM Result recording against Inspection lot, there is a column called "Specifications".
    Can anyone tell me from which table I can get the avlues of Specification field/
    Typically, I have below specification values. For one of my report I want these field values.
    Description the material
    <=  0,5 %
    >=  99,0 %
    98,50 .. 100,50 %
    85 .. 90 °C
    >=  0,10 mg/tab
    Kindly help me to get the field values.
    Thanks

    explore bapi BAPI_INSPCHAR_GETREQUIREMENTS----
    >parameter READ_CHAR_REQUIREMENTS
    Also BAPI_INSPOPER_GETCHAR
    can Results Recording QAMV Characteristic specifications for inspection processing  be used ?

  • Result recording for quantitative inspection characteristic

    Team
    Greetings!
    Please find the following requirement.
    We are using quantitative characteristics inspection.
    Inspection lots are created automatically and the sample size for each characteristics are determined based on the sampling proceedure.
    when we do result recording for a characteristic, say the sample size is 5, even if any one of the sample does not fall under the limit, we need the characteristic to be rejected.
    How can this be addressed.
    Gobinathan G

    .

Maybe you are looking for