Table to See Stock Transport Order Partners

Hi All.
What table can I see the partners defined in a Stock Transport Order?
I've realized that VBPA is just for sales order documents.
Thanks,
Jim

Hi,
Select the PO's from the EKKO table of DOCU type "UB" which is STO's
Then Select the parters from the EKPA table for the entries of the selected EKKO Po's
Reward Points if it is Useful.
Thanks,
Manjunath MS

Similar Messages

Stock Transport Order - Partners not Determined

Hi Colleagues,
We have a simple Intra company Stock Transport Order and want to get the partner function 'VN' into the purchase order and then into the Inbound Delivery
We have configured the partner schemas and assigned to the vendor account group 0007. Partners are created in the plant vendor record
We have configured the purchase document schema and assigned this to document type 'UB'. However, the partners are not defaulted into the STO. We can assign them manually
However, when we create the Inbound Delivery for the STO the vendor is not defaulted into the delivery and gives an incompletion error. We can manually enter vendor in the inbound delivery and then save the document.
Any Ideas what is wrong or missing?
Thanks
Steve

have a look into OSS note 863541 - Standard vendor for inbound delivery w/ purchase order refer

UB[Stock transport order] - Partners

Hello,
I have a define a partner function to a UB Purchase order. Where can I configure to determine automatically? Is there any user exit to do it ?
I debug code and I discover in program SAPLMEPO (MM06EF0P_PARTNERS) FORM PARTNERS that in line 97 'CHECK ekko-bsakz EQ space' my purchase order have ekko-bsakz = 'T' (that is standard) and never determine partners.
Thanks

Upto my knowledge you can do partner function in Stock transport order .
Stock transport order is meant for stock transfer between storaage location within a plant having same company code (or) with different company code.
Stock transfers can occur at three different levels:
Stock transfer from company code to company code
Stock transfer from plant to plant
From storage location to storage location (in the plant)
G.Ganesh Kumar

Tables for delivery and stock transport orders

Hi Members,
I have a requirement where i have to display (in a report output) a requirement quantity of deliveries and stock transport orders which are displayed in MD04 transaction for particular material and plant.
I don't know which tables these quantities sit into.
If you know please help.
Points will be suitably rewarded.
Reagrds,
Boby

>
Boby wrote:
> Hi Members,
>
> I have a requirement where i have to display (in a report output) a requirement quantity of deliveries and stock transport orders which are displayed in MD04 transaction for particular material and plant.
> I don't know which tables these quantities sit into.
> If you know please help.
> Points will be suitably rewarded.
>
> Reagrds,
> Boby
if you only have to display deliveries and stock transport orders you can take LIKP and LIPS for the deliveries and LTAK and LTAP for transport orders.
for all the other elements displayed by MD04 we would have to know about your setup: are you using dispo-areas (which would populate tables MDMA ...) so in that case please provide more information.

Link between batch stock and stock transport order no.

hello all,
my client want the report for stock in hand against batch and sto no..in standard tcode mb52(stock in hand) we can see the stock against batches.but i want the report for which sto no. stock is recieved corresponding to batch.
pls tell me from which table and field i should pick data for stock against sto no.
thanks in advance for ur valuable input
regards
simran
caution-- we are using two step procedure with stock transport order for transferring the material between plants

S

Cross Sales & User exits & stock transport orders

Hi all,
<b>
Can anyone tell me about Cross Sales & User exits ?
Also what is stock transport orders ? Can i get some config. steps for that ?</b>
My id : [email protected]
Rajarshi

Hi,
Mail order catalog retailers frequently use cross selling to increase sales. When a customer orders an article over the phone, the order taker can suggest additional articles that the customer might buy. For example, if the customer orders a VCR, you might suggest purchasing some blank tapes; for a cellular phone, a leather carrying case.
The sales transaction takes place as normal: The customer chooses an article and the order taker enters it on the sales order screen. The order taker can press Enter after each article, or wait until the customer has finished selecting the article he or she wants.
If the order taker presses Enter after entering the data for one article, then a dialog box appears automatically, displaying a list of articles to be suggested to the customer. These cross selling articles are ones that pertain specifically to the purchased article.
If the order taker waits to press Enter until the customer has finished ordering, then the dialog box appears automatically, this time showing all of the articles in the sales order, along with their corresponding cross selling articles.
The articles that appear in the cross selling dialog box always depend on which articles are in the sales order. If you want to have the system suggest articles based on the customer's past purchasing history or other factors, see Dynamic Product Proposal in the standard SD documentation.
The cross selling dialog box displays the following information:
Article number
Description
Sales unit of measure (each, 3-pack, etc.)
Price per unit of measure (calculated either by the standard R/3 pricing scheme or by a custom pricing scheme you have defined)
Availability check
Delivery flag (that is, whether the cross selling articles can be delivered independently of their corresponding main articles in the sales order, or whether the cross selling articles can only be shipped either together with or after the main articles have been shipped)
To set up cross selling, you must make the following settings in Customizing:
Create the conditions tables, access sequence, and calculation schemes for determining cross selling articles, since the cross selling function relies on the conditions technique. (Alternatively, you can use the analysis discussed in "Activities" below to create the data automatically.)
Create a cross selling profile with the following attributes:
Determination of cross selling articles via function module
Price calculation scheme
Scheme using conditions technique
Flag indicating how the cross selling dialog is to appear
Flag indicating whether an availability check is to be performed
Assign the cross selling profile to a sales area, document scheme, and customer scheme.
USEREXIT
Userxits allow us to add our own functionality to SAP standard program
without modifying it . These are implemented in the form of subroutines and hence are also known as FORM EXITs. The userexits are generally collected in includes and attached to the standard program by the SAP.
Reward ipoints if useful
Regards,
Amrish Purohit

Problem in creation of STO(stock transport order)

hi all SAP gurus,
i am facing the problem in creation of stock transport order with ME21N code. i m getting the error msg of "Not possible to determine shipping data for material in STO "
i have checked the stock transport order setup in customization. but not getting the clear idea to come out from this problem.
if anybody have the idea of " how to do the customization of stock transport order setup, pls. let me explain.
thnx in advance.
rgrds,
rajesh

Hi Rajesh,
when ur creating STO with UB doc type, then you have to maintain material in both the plants.
Regarding the error which is comming for you, you have to check the settings at
SPRO- IMG- MM-Purchasing-Set up stock transport order- Assign delivery type & Checking rule
here for document type UB and your supplying plant-XXXX select nothing for Dlv type(delivery type) and chr - 01 and after this save.
After this you create STO as you are doing and see what the system is prompting.
For any further clarification let me know.
Regards,
NJ

Stock Transport Order u2013 Duplicate goods receipt quantity

We implemented the scenario: the stock transport order process with SD. To post the goods issue , we have created a new goods movement type (937) with reference to the movement type: 641, to differentiate these movements of other goods movements that are made in the company, because in this case, for issuing plant it is necessary to manually confirm these goods issues in WM (We need use storage bins in issuing plant). The outbound delivery, in issuing plant, is created through the transaction VL10B with reference to Stock transport Order, and goods issues is posted using transaction VL02N. In receiving plant, we use transaction MIGO to post goods receipt.
Then, when we post the goods receipt for one replenishment delivery in Transaction MIGO, the system issues error message: M7022 telling us: u201Cthat the stock in transit has been exceeded by XXXu201D. The difference between the stock in transit and the Quantity in Unit of Entry is exactly equal to the quantity that was reported in the goods issue in Issuing Plant (outbound delivery). That is, Quantity in Unit of Entry is duplicated with respect to outbound delivery quantity. But if the goods receipt is posted with reference to the stock transport order, the Quantity in Unit of Entry is calculated correctly and corresponds with the quantity of outbound delivery of the issuing plant. This does not happen when using the standard goods movement type 641. As mentioned above, we have configured Warehouse Management for issuing plant.
The only difference between the standard scenario and implemented one in the company is the goods movement type, which is a copy of movement type 641. So, my question is: Can not copy the goods Movement type 641 (Transfer to stock in transit)? Please, I appreciate your support to resolve this issues.
Best regards,

All goods movements are being posted in the same unit of measure (base unit of measure ), since the material has no alternative units of measure configured. And we think that has to do with the movement type, because when using the standard movement type (641), the whole process is flowing properly. However, when using the new movement type, the system behaves the way it was explained earlier.
Through various tests, we identified that the quantity is duplicated when the table T321 (Assignment MM Movement Type --> MM-WM Movement Type) and the IMG view V_156S_WM (Reference Movement Types for Warehouse Management) are set, since it also was created a new movement type for WM. For this reason we think that the problem lies in the configuration of the new movement type.
Anyway, thanks for your help.

Overdelivery in intra-company stock transport order

Hello,
I have the following scenario - I have two plants, 1000 and 2000, both under the same company code.
I transfer 450KG of material 123456 from plant 1000 using STO with SD (mvt. type 641), material is packed in HUs. In the receiving plant, the HUs are being place on a weight to check their actual weight. It;s possible for the actual weight be greater than the GI weight of 450KG (for example, due to weight scale accuracy issues) . When doing GR, I need to be able to receive quantity greater than the GI quantity. That is not allowed in stock transport order (per note 212387). For the same scenario with intercompany STO (GI mvt type 643) I'm able to post GR quantity which is greater than GI qty.
Any suggestion on how to solve this? Can I create a customer order type that is both intra-company and allows for overdelivery?
Thanks,
Yossi

a overdelivery does not make any sense in stock transfers, you would solve the problem of the stock accuracy in the receiving plant, but at the same time you create another problem with a negative stock in transit, that never gets cleared.
a STO having stock left in transit is never considered as closed. even intercompany stock transfers are not considered as closed, even you can receive more than issued.
Latest when archiving purchasing documents then you will see all your error in the process design, because only closed business cases can be archived.
in stock transfer business you always have to care about both sides, you cannot just care about the receiving plant and ignore the problems of the sending plant.

Stock Transport Order between Two Company codes

Dear All
Scenario-- Stock transport order Between two company codes.
The valuation of Comapny Codes is at Moving Average Price.
I have a scenario
MAP of Issuing Plant-- Rs. 10 / kg
I am able to pick up the price of Rs.10 (MAP) of issuing plant while creating PO.
in receving plant.
At the time of Goods issu the MAP has changed & become Rs.12/kg. Hence the goods issue takes place at Rs.12/- perkg.
When we make GR at receiving plant ,the valuation of GR is at Rs.10 i.e at PO price.
Is it possible to have a GR valuation at Goods issue price for that delivery note?
Request Your feedback urgently.

The invoice has the material costs at time of goods issue.
You receipt is valuated to PO price. But when you post the invoice, then the MAP is adjusted,
By setting up EDI, SAP will probably post the invoice before the goods receipt is done, hence the GR should be valuated with the invoice price.
from Note 518368 - FAQ: Valuation for the purchase order;
With which price is the goods receipt posted for a purchase order?
Answer:
If the goods receipt is executed before the invoice receipt, the goods movement is valuated with the purchase order price. If an invoice is already posted, the system uses the price of the invoice. If a partial invoice is received, the partial quantity corresponding to the invoice is valuated with the invoice price, the rest is valuated with the purchase order price.
For more detailed information, refer to both the documentation of the material valuation and Note 380883.
see as well Note 547570 - FAQ: VPRS in pricing

Excise Duty handling for Inter company Stock Transport Orders in SAP 4.6C

I want to handle Excise Duty handling for Inter company Stock Transport Orders in SAP 4.6C. I know that SAP has provided standard solutions in 4.7C by giving one standard table OIH09 which can be maintained through Customisation.
In 4.6C, even the Goods issue & Goods receipt button in item details of Stock Transport order is not available.
Is there any work around for the same.

In IS-OIL, cross company postings were stopped with Note # 623910 & would
require a core modification to achieve this functionality.

Automatic Post Goods Issue Of Stock Transport Order

Here is the scenario:
We are using stock transport order to logically move inventory from one company to another company inside the same physical location. The material# is the same but the plant# is different.
Process is as follows:
Associate enters the purchase order
If inventory exists - delivery is created automatically
The delivery is also auto picked
Currently, we have the inventory to PGI in a batch job several times a day.
However, the user would like to have the inventory - move as soon as the delivery is created.
Does anyone know of any technique - to post the inventory immediately.
I was thinking along the line of a workflow/create of an idoc (WHSCON) to faciliate this.
Kind Regards, Steve

You could simply scedule the batch job to PGI right after the delviery creation job runs (just delay it a few seconds after the longest period of time the delivery creation job runs).
So there would only be a very short delay, Looking at vl10g now to see is auto PGI is an option but I am thinking it is not
(I will update my post if I find it is)
Edit: It doesn't look like a standard option but I would imagine you could change a function code profile with custom user exit to trigger goods issue

Stock Transport Order (STO)will not create delivery

I have created a intercompany Stock Transport Order (STO) and it has created the shipping tab in the Purchase order(PO), and all seems to be correct.
I have material in the plant, yet when I go to create the delivery using VL10G, the PO does not show as a choice. I also do not get an error, so I cannot tell why it is not creating the delivery.
Is there a way to see an anaylis of why the STO is not showing as a choice?
Thanks,

Hi,
Please check the delivery date in the STO created.and adjust the del creation date etc input fields at VL10G and try the posting.If there exists no error in the po created.

Stock transport order with BAPI_PO_CREATE1

Hi,
can anybody give me an advice how to use the function BAPI_PO_CREATE1
to create stock transport orders?
I´m getting some errors when I run it. Here is my test data I have used:
poheader-comp_code: NO10
poheader-doc_type: UB
poheader-langu: EN
poheader-purch_org: NO10
poheader-pur_group: 999
poheader-suppl_plnt: 2041
in poheaderx I have set a flag for the filled fields.
poitem-po_item: 00010
poitem-short_text: test
poitem-material: 100230
poitem-plant: 2001
poitem-quantity: 1
poitem-po_unit: CYL
poitem-conv_num1: 1
poitem-conv_den1: 1
poitem-prnt_price: X
poitem-unlimited_dlv: X
poitem-item_cat: U
poitem-acctasscat: K
poitem-gr_ind: X
poitem-ir_ind: X
poitem-gr_basediv: X
poitem-preq_name: TEST
I´m getting the following errors in the return table:
       ID                Num: 000 PO could not be creating using Enjoy-BAPI
E     ID MEPO     Num: 002 PO header still faulty
E     ID 06           Num: 098 Please enter supplying plant
E     ID ME         Num: 018 Item category U can only be used with material
W    ID ME         Num: 040 Can delivery date be met?
E     ID ME         Num: 083 Please enter G/L account no.
Any ideas how I can create one successfully?
Cheers

Hi,
poitem-po_item: 00010
poitem-short_text: test
poitem-material: 100230
poitem-plant: 2001
poitem-quantity: 1
poitem-po_unit: CYL
poitem-conv_num1: 1
poitem-conv_den1: 1
poitem-prnt_price: X
poitem-unlimited_dlv: X
poitem-item_cat: U
poitem-acctasscat: K
poitem-gr_ind: X
poitem-ir_ind: X
poitem-gr_basediv: X
poitem-preq_name: TEST
fill the corresponding fields in POITEMX table also with 'X'!
Regards,
Sooness.

Excise Pricing procedure for Stock Transport Order in MM with TAXINN

I am an SD guy running STO from manufacturing plant to sales depot
AND not able to create JEX proforma excise invoice from NL
to TEST my configuration, I created excise invoice in J1IS with respect to goods issue from NL from UB means configuration is ok
BUT base amount in J1IS is coming as zero because of missing excise conditions in MM STO pricing procedure
CAN anybody give me a sample EXCISE pricing procedure for STO
AND do i need to create records for the condition types in FV11 OR MEK1 please clarify
I know that calculation type 362 attached to BASB in TAXINN has something to do with this
I am able to see chapter ID in J1IS
And the relation between condition types in TAXINN and excise pricing procedure for STO
And I am able to create excise invoice in J1IG with zero excise values
I also maintained pricing procedure determination for JEX in OVKK that is document pricing procedure N pricing procedure JINSTOCK
I think my explanation is sufficient enough
please give A sample of TAXINN

Hi Yoga,
Here u not need to do VL10b.just follow this steps and try.
In PO,Document type is UB and Item Category is U.
After creating PO,In MB!B with reference that PO number and using movt type 541
then u can see that stock in Transit.Now u do GR with respect to PO number.
Thanks & Regards
Suresh.
> Hello MM Gurus,
>
> I am doing Stock transport order between 2 plants
> under same company code.
> I have maintained all the required settings.Following
> is the process flow.
>
> 1.Creation of Purchase order with document type
> UB.(ME21N)
> 2.Creation of outbound delivery with respect to
> Purchase order.(VL10B)
> 3.Post Goods Issue from the supplying plant. (VL02N)
> 4.Creation of Excise Invoice in supplying plant.
> (J1IS)
> 5.Goods receipt at the receiving plant.(MIGO)
>
> While I am doing Goods receipt in the receiving
> plant, system is giving an error
> message "Maintain Vendor for the Excise Invoice" -
> Message no. 4F185.
> Why this message is coming and how to resolve this?
>
> Thanks & Regards
> Yoga

Table to See Stock Transport Order Partners

Similar Messages

Maybe you are looking for