Table to see which transaction code or program is been used less
Hi,
My requirement is to identify those programs or tcodes which are been used less.
Is there any table where it has a record of this ...
Regards-Siju
Thanks for the reply..
I'm not able to find out what I require..
For ex) I would like to check the usage of transaction MM01 for the period 01-01-2006 to 01-12-2006...
Can you help me how to select the parameters and get the desired output.
Similar Messages
-
How to find out all the tables associated with particular T-code or Program
Hi All,
In 4.6B we have a transaction code SE49, where we can see all the tables associated with particular Transaction code or Program.
But in ECC 5.0 or in ECC 6.0 this transaction code is not available.So is there any alternative where i can find out all the tables associated with particular T-code or Program.
Thanks
ShubhamHi,
you are right, Transaction SE49 as well as SE48 do not exist anymore I'm afraid, they
are discontinued.
You might try to create a transaction variant:
1) Start SE93 to create a transaction variant
2) Specify a name, eg. ZSE49, and choose the first option:
"program and screen (dialog transaction)
3) Here specify SAPMSEUZ as program, and 200 as screen number
4) Choose a suitable development class (package) if you want it to be
transportable or Local (=$TMP) if non-transportable
5) press Save
Same applies for SE48, same program but dynpro 100.
Sorry for not being able the reasons behind the decision to discontinue
these transactions. I suppose at least part of the functionality was
integrated in SE38.
Best regards
Erika -
Where to see the transaction code for a script
Hai my dout is where to see the transaction code for a script after assigning to a drive programm for example i see output for medruck in me11 and for other standard scripts where can i see the output is there any table avaible to check it
Hi masthan,
for sd and mm related scripts. u can use tnapr.
Otherwise go to nace transaction u can find the script name as well as program name.
Or u can try with TSTC table, which will give the t/c's.
Regards...
Arun. -
STAD - get the 'transaction code' and 'program name'
Hi, I was wondering if someone knows about a bapi with which I can get only the "transaction code" and "program name".
I need to get those for a specified user, but I don't want to set on a trace, that's why I'd like to use the transaction STAD.
If anyone can help, thanks in advance
Grtz,
Dragovianok, so I go like this
TYPE-POOLS sapwl .
DATA: all_stats TYPE sapwl_allstats.
CALL FUNCTION 'SAPWL_READ_STATISTIC_FILES'
EXPORTING
read_client = '*'
read_time = '200000'
read_start_date = sy-datum
read_start_time = '000000'
read_username = sy-uname
read_workprocess = 'FFFF'
wait_factor = 150
CHANGING
all_stats = all_stats
how'd I get "start-time" "report-name" "date" "username"? -
Want to know the tables of a particualr transaction code
Hi,
whatz the technique of knowing the tables of a particular transaction code.
I have got a tcode - va01.
Want to know the tables of this transaction code.
How...?Hi,
If you want know about transaction code table details
1. Enter Tcode 'ST05' (SQL Trace on), You can find how many tables are involved in the tcode
2. Goto SE93, enter VA01 and find the program name, Go to object browse (se80) and enter program name and find out how many tables are invloved (Another way go to search- Give search term 'Tables' -> there u can find the tables involved.
Regards
Bhupal Reddy -
How can I see all the Transaction Code that the client is using?
How can I see all the List of Transaction Code that the client is using?
Hello Sugauli,
Did you mean to ask
transaction types the client is using?
instead of
transaction code
If so, go to SPRO (in ERP system) and follow this path:
Sales and Distribution -->
Sales -->
Sales Documents -->
Sales Document Header -->
Define Sales Document Types
All the transaction types that are not used have an X in the column Block.
Easwar Ram
http://www.parxlns.com -
In which transaction CODE we can maintain system messages.
Hi
In which transaction code we can maintain system messages for sap sd point of view.
For example : in sales order i want warrning message instead of error message .
Thanks,
KPHi,
All the system messages which are pertained to application area "V4(Sales messages (variable messages and EDI messages))" can be handled by using the T.Code "OVAH".
The path for this is:
SPRO>Sales and Distribution>Sales>Sales Documents>Scheduling Agreements with Delivery Schedules-->Define Variable Messages.
All others can be handled by using the T.Code "SE91".
Here Enter the message class and message number.
Regards,
Krishna. -
How do see which t-codes users have been accessing ?
Hi folks
I have been asked to run a report by user name showing which t-codes have been used, say in the last 90 days.
Is this possible? Or is this information available in a table somewhere, If so what is the table name and key fields needed.
Layout would need to be something like:
User name
T-code Date Accessed Time Accessed
xxxx xx.xx.xxxx xx.xx.xx
Thanks for any advise.
Points awarded for helpful answers !
Regards
Steve
Edited by: Steven Lawrence on Jun 27, 2008 12:08 PMHi folks
Hi,
Transaction execution is histroy is not stored in any table, but it is only stored at server level in binary format. This file gets formatted when ever application server is Restarted.
You can access execution histroy data using STAT (upto 4.7) /STAD (above 4.7) -
How to see which company codes are affected by a WT
Hello Community,
Hope you all are doing well, I would like to consult you because I have this situation, I want to know what company codes are affected by a particular WT in an specific country, is there any report or Transaction or do you know a way to do it? I tried by launching the WT report in a large period for country area with the wt that I want to check but the problem with this is that it may exclude a company code that can have the wt active but was not generated under the period. Please your assistance.
Thanks in advance for your timeEfrain,
Not exactly sure your requirement, however there is a transaction code PC00_M99_DKON which will show you the wage assignment. On the selection screen enter your country code as 10 if running for USA and the wage type. Execute it.
When you run it for a particular wage type and expand the results 'source system' then you will see the associated Company code for which the wage type is applicable.
Hope it helps you.
Thx,
Ashish -
Transaction Code - Upload Program
Dear All,
Please help.
Like wise we can assign a T code to a BDC program for using it as upload program.
Please tell me can a T code be assigned to an upload program done through LSMW
& how...???
Regards
DhananjayHello,
you can create a templete for uploading the data using LSMW and create as a program and assign a transaction code to it. But all you require is ABAP help.
Prase -
Which transaction code may i use
Hi,
i have created a new sapscript form to print out but i dont know which transaction i will use to use my sapscript instead of the sap's standard form, i want to change the forms.
Thanks.Very basic, please search for available information, also use correct sub-forum when posting again.
Thread locked.
Thomas -
Transaction code to show previous tcodes used
Hi all,
Gud morning...
Is there any transaction code to view all the tcodes used by us?Hi Chandra,
Welcome to SDN.
You can go to transaction code <b>SE93</b> and type transaction code = <b>Z</b> (Custom transaction) or <b></b> (All transaction)
Or go to <b>SM04</b> to see transaction code used by user.
The full list of transaction codes is maintained in the tables <b>TSTC and TSTCT</b>. So, you can have a look via <b>SE16</b>.
Hope this will help.
Regards,
Ferry Lianto -
I paid for CC and have been using PS. However, I can't get to LR. It says I need a serial Number. I contacted Adobe and they said that is not the case. Then I got cut off. Any fix?
If you paid for CC-full-suite or CC-Photography-Plan then you should have a CC-licensed version of LR available, but only if you uninstall the serial-number-licensed LR you apparently have, now. At least try that, uninstall LR 5, log out of the CC app using Gear / Preferences / Account / Sign-Out, reboot, log back into the CC app, and see if LR is one of the items listed.
-
Why do I see message "this Apple ID has not yet been used in iTunes Store when I try to download some free apps? Please let me know how to resolve this
Hey Maniopr,
I would try out the information in the following article to sign in:
Using an existing Apple ID with the iTunes Store, Mac App Store, and iBooks Store
http://support.apple.com/kb/HT2589
Welcome to Apple Support Communities!
Cheers,
Delgadoh -
Transaction code or program updating table TBD05
Hi All,
While executing some program we encountered the following message.
"No log.sys. for plant plant_name"
This is because one entry is missing in the table TBD05 with the combinations of messsge type ZMDCMS and the plant name.
Please let me know if any one knows how this particular table gets populated.
Thank you all..
Binduhi
plz checl t code SALE
go to SM30 here give table click on customizing
then click on without project
here u will get all spro paths where this table is used
hope it help
regards
kunal
Maybe you are looking for
-
Update MKPF , LIKP table
Hi All, my requirement is to update a field i.e TCODE2 in MKPF table, I can update directly But SAP do not recommend, Is there any other way I can update the field from ABAP program, I also want to update field in LIKP table, please tell me how to up
-
Photoshop Elements 10 Organizer stuck
I am no longer able to open PSE 10 Organizer now that photoshop.com is obsolete. I have read several forums and attempted their suggestions (diabling backup/sync from Windows taskbar, opening PSE Organizer directly from .exe file in Program files),
-
IPS network Module, need help!!!
Folks, I recently installed IPS network module in my 3662 router. I am having problems making the IPS log anything. When i access the web interface of the IPS, i see only 1 interface available under virtual sensor, the interface is fast 0/1. and the
-
Can't open new project in DVDSP.
I'm new to DVDSP, but have been using FCP for years. I was in a hurry to finish a project the first time I opened it (my movie prepared and ready to burn), could not find concise instructions on the basics and resorted back to iDVD. Now I'm traveling
-
HELP - Pr is crashing upon selecting quit.
Never had this issue. Premiere Pro has encountered an error: [/Volumes./BuildDisk/builds/MightySilt/PremierePro/Handlers/Monitor?SourceMonitor/Make/Mac /../../Src/SourceMediaBackgroundView.cpp-318] It occured when I was trying to save using command