Table UI Design

Hi,
What I want to acheive right now is something like this..
For every row in Column 1 i need multiple rows in the remaining columns. Something corresponding to the following context node {Please ignore the dots(.) they're substitutes for blank spaces, for formatting }
Context
|
Table (NODE)
...|-OuterAttr1 (Attribute)
...|----InnerNode (NODE)
......|-InnerAttr1 (Attribute)
......|-InnerAttr2 (Attribute)
......|-InnerAttr3 (Attribute)
Is there something like a ROWSPAN that I can set for the 1st column? And even then the problem is that the number of rows corresponding to that is dynamic.
OR
Alternatively is there anyway to embed a Table( or a Container Element such as Group) into the 2nd column of the Outer Table?
The second alternative is very lucrative.
Regards,
Ashish.

Hi Ashish
The table control as far as I know does not give these kinds of functionalities. Or we should wait for Armin to respond .
But you could achieve something like this
Column1 |
Master
Column2| Column3 | Column4
Detail1 Detail1    Detail1
Detail2 Detail2    Detail2
===================================
Column1 |
Master2
Column2| Column3 | Column4
Detail1 Detail1   Detail1
Detail2 Detail2   Detail2
===================================
What you could do is generate tables dynamically on the fly ,I assume that you have two kinds of data here master and detail and you want the master to be shown first and then the set of detail. For every master record generate a table dynamically with a single row and bind it to the record. Remove your footer.
And for a group of detail records generate a table dynamically with and bind to the detail records. Remove the footer. You can use the invisble UI element to achieve some padding at the start
Regards
Pran

Similar Messages

PayPal buttons inside table scramble Design View in DW CS5.5

I developed my web site using Dreamweaver 8:
http://www.harmonize.com/hatleymusic/classic.html
As you see, I have PayPal buttons inside table cells. I did this using Design View, putting the insertion point in the table cell, going to code view, and pasting the PayPal button code at the insertion point. This all worked fine.
I just upgraded to DW CS5.5. and now when I try to use the same procedure, the Design View image gets scrambled after I paste the button code in code view. The table format is no longer in place, and I can no longer see where the cells of the table are. However, when I go to Live View, everything looks fine including the table and the buttons.
Can anyone tell me how to overcome this problem? As it stands, I cannot use DW to work on my web site, which is a major problem for me.
Thanks.

How do I get someone to respond to my question here?
Let me try again.
With DW CS5.5 when I try to insert a PayPal button into a table (which I always did with DW8) the table in Design View gets scrambled, making it unusable. Please would one of you out there who is much more knowledgeable about DW than me try it and see if there is a solution? If you create a new HTML page in Design view, create a table in it, place the insertion point inside one of the table cells, go to the code view and locate the insertion point there, then paste the PayPal button code at that point. Here's the code:
<form target="paypal" action="https://www.paypal.com/cgi-bin/webscr" method="post">
<input type="hidden" name="cmd" value="_s-xclick">
<input type="hidden" name="hosted_button_id" value="XSXQ9CUMUVLQC">
<input type="image" src="https://www.paypalobjects.com/en_US/i/btn/btn_cart_LG.gif" border="0" name="submit" alt="PayPal - The safer, easier way to pay online!">
<img alt="" border="0" src="https://www.paypalobjects.com/en_US/i/scr/pixel.gif" width="1" height="1">
</form>
Now go back to Design view and see how it looks. If it acts the way it does for me, the table is no longer visible, but if you go to Live View everything looks fine with the table and the button inside it. Of course, I can't design in Live View.
PLEASE can someone out there help me.
Many thanks.

How to create a type table in designer 9i

Hi
In our company we use designer 9i. I want to create a type table using designer. Is it possible? I have a requirement where i need to create a type table and use in creating a view through designer.
Create or replace type varchar2_ntt as table of varchar2(4000);
[\pre]
Please suggest.

Hi
Here I am giving the step by step process.
1. select the container in which container you are going to create the type.
2.Go to tools then design editor and expand the container. There you will find oracle collection types. there we have to create a new one by clicking the + button on the left side.
3. Give the name of the new collection type.
4. And in the collection of tab, let it be scalar, give the scalar data type,and the size and click finish.
5. then right click on that object and give generate. there you select theDDL files only and the give the path where the scripts have to go.
This the process.
Thanks,
raju

Table control designed by wizard greys out after pressing enter

Dear Gurus
I have implmeted a badi to show some data on vl02n in a extra tab inside a table control designed using table control wizard. I have caught sy-ucomm event to display corrsponding data on the table control to what I am already sending from pbo of the screen everything is working fine beside just one thing. Initially all the rows of table control stays in editable mode but When I enter some record and hit enter the corresponding record is properly shown along with the record from pbo and enterd on the table control but beside the current row all the rows below it turn grey and I cannot enter any further data. Please help me out.
Anurag
Edited by: Anurag Jain on Sep 17, 2009 12:28 PM
Edited by: Anurag Jain on Sep 17, 2009 12:29 PM
Edited by: Anurag Jain on Sep 17, 2009 12:29 PM
Edited by: Anurag Jain on Sep 17, 2009 12:29 PM

Solved. The problem was with the sequence in which code was written for all table control in PBO module. PBO code sequence for table controls should be as per the sequence on screen.

Adding One Line Code in all tables in Designer Trigger.

I have 300+ tables in my Schema (All tables generated through Designer), I want to add one line of code in the begining of "Before Inset Row Trigger" of all tables, So what is the fastest way of doing that,
Adding One Line Code in all tables in Designer Trigger.
I don't want to go and modify each and every table

You'll have to write a script that reads out the current contents of your triggers, add your line to this contents and dynamically "create or replace" the new trigger text.
Beware, trigger_body column of user/all/dba_triggers is in a column with datatype LONG, so you'll have to use some sort of conversion.
Good luck.
regards,
Rob.

Very Urgent Table Column Design

Hi,
This is what i have done, I am having a table with 2 columns.One is Text view and the other is Link to Action. I set the Table row count as 10. Table design is standard and all columns design is standard. Now The first text view column appears blue in colour and the second Link to action appears in White. To make both to have same white colour i made the table as Read only now both columns appear as white. If the table have more than 10 records it works fine. But if it is less say 4 records then first four records are in white remaining are in light blue. I want to make every thing to appear same white or same blue color. How to do this .
Kindly Help this is very Urgent
Rk

hi rk.......
          try this out.......
          consider your are having 4 records but the line count is 10 in the table.
          insert 6 empty records into the table.
          it will work fine.
---regards,
   alex b justin

Table in design view not displaying properly

I put in a table at 100% width - to house a spry menu. It shows up fine in all browsers and in live mode, but in dreamweaver design view the table and menu display off to the right - outside of the workspace. It's a pain! How do I fix this?

You certainly do NOT need a table to hold your menu -- no matter which one you use.
Table layouts went the way of the dinosaur last century. Nowadays, we use CSS for layouts. To illustrate, copy & paste this code into a new, blank document and preview in browsers.
<!doctype html>
<html>
<head>
<meta charset="utf-8">
<title>HTML5 Document</title>
<style>
    /**fixes the box model**/
    -moz-box-sizing: border-box;
    -webkit-box-sizing: border-box;
    box-sizing: border-box;
/**basic layout**/
body {
    width: 80%; /**adjust width in px, em or % as desired**/
    margin:0 auto; /**with width, this is centered**/
    background: maroon;
    font-family: Segoe, "Segoe UI", "DejaVu Sans", "Trebuchet MS", Verdana, sans-serif;
    font-size: 100%;
header, footer { color: #FFF; }
/**left sidebar**/
aside {
    display:table-cell;
    width: 25%;
    padding: 1%;
    background: #C99;
/**main content**/
article {
    width: 75%;
    display:table-cell;
    padding: 2%;
    border-left: 1px dotted silver;
    background: #EAEAEA;
footer {
    clear: left;
    font-size: 80%;
    text-align: center;
/* BEGIN HORIZONTAL DROP-MENU */
nav {
    position: relative;
    width: 100%; /**adjust width as needed**/
    margin: 0 auto;
    padding: 0;
    text-align: center;
    z-index: 1000;
nav ul {
    margin: 0;
    padding: 0
nav li {
    list-style: none;
    font-size: 12px;
    float: left;
    text-align: center;
/**top level menu**/
nav li a {
    display: block;
    text-decoration: none;
    margin-right: 2px;   /* space between links */
    width: 12em;   /* adjust as needed or use auto */
    padding: 6px 15px;
    font-weight: bold;
    line-height: 2em;
    color: #1e5799;
    border: 1px solid #FFF;
    background: #C7D5E3;
/**top menu style on mouse over**/
nav li:hover > a {
    color: #FFF;
    background: #1e5799;
/**sub-menu**/
nav li ul {
    display: none;
    text-align: center;
    margin: 0;
    padding: 0 1em;
    background: #C7D5E3;
    font-weight: normal;
    font-style: oblique;
/**sub-menu, help for older IE**/
nav li:hover ul, nav li.hover ul {
    display: block;
    position: absolute;
    padding: 0;
nav li:hover li, nav li.hover li { float: none; }
/**drop-menu style**/
nav li:hover li a, nav li.hover li a {
    width: 12em; /* adjust width as needed or use auto */
    margin-top: 0;
    line-height: 1.25em;
    font-weight: normal;
    border: none;
/**drop-menu style on mouse over**/
nav li li a:hover {
    background: #D3E1B7;
    color: #004A43;
/**clear floats**/
nav:after {
    clear: both;
    display: block;
    content: '';
/**END DROP MENU STYLES**/
</style>
</head>
<body>
<header>
<h1>Your Awesome Site Name</h1>
<h2>Some Pithy Slogan</h2>
</header>
<nav>
<ul>
<li><a href="#">Menu Item1 ▼</a>
    <ul>
    <li><a href="#">Sub_menu1a</a> </li>
    <li><a href="#">Sub_menu1b</a> </li>
    </ul>
</li>
<li><a href="#">Menu Item2 ▼</a>
    <ul>
    <li><a href="#">Sub_menu2a</a> </li>
    <li><a href="#">Sub_menu2b</a> </li>
    <li><a href="#">Sub_menu2c</a> </li>
    <li><a href="#">Sub_menu2d</a> </li>
    </ul>
</li>
<li><a href="#">Menu Item3</a></li>
<li><a href="#">Menu Item4</a></li>
<li><a href="#">Menu Item5</a></li>
</ul>
</nav>
<aside>
<h3>Left Sidebar</h3>
<p>Lorem ipsum dolor sit amet, consectetur adipiscing elit. Mauris vitae libero lacus, vel hendrerit nisi! Maecenas quis velit nisl, volutpat viverra felis. Vestibulum luctus mauris sed sem dapibus luctus. </p>
<p>Lorem ipsum dolor sit amet, consectetur adipiscing elit. Mauris vitae libero lacus, vel hendrerit nisi! Maecenas quis velit nisl, volutpat viverra felis. </p>
</aside>
<article>
<h3>Aritcle Heading</h3>
<p>Lorem ipsum dolor sit amet, consectetur adipiscing elit. Mauris vitae libero lacus, vel hendrerit nisi! Maecenas quis velit nisl, volutpat viverra felis. Vestibulum luctus mauris sed sem dapibus luctus. Pellentesque aliquet aliquet ligula, et sagittis justo auctor varius. Quisque varius scelerisque nunc eget rhoncus. Aenean tristique enim ut ante dignissim. </p>
<h3>Heading 3</h3>
<p>Lorem ipsum dolor sit amet, consectetur adipiscing elit. Mauris vitae libero lacus, vel hendrerit nisi! Maecenas quis velit nisl, volutpat viverra felis. Vestibulum luctus mauris sed sem dapibus luctus. Pellentesque aliquet aliquet ligula, et sagittis justo auctor varius. Quisque varius scelerisque nunc eget rhoncus. Aenean tristique enim ut ante dignissim. </p>
</article>
<footer>
<small>© 2015 Your Site Name. All rights reserved.</small>
</footer>
</body>
</html>
Nancy O.

Unable to create Tables in design view

One of the two problems I am having (the other will also be
posted) is that I am no longer able to use Design View to Insert
Tables at all - I get the following error message: (I made a
printscreen of the error but not sure how to embed the picture in
this post so here is the message verbatim).
"While executing objectTag, the following JavaScript error(s)
occured:
At line 26 of file "Macintosh HD:Applications:Macromedia
Dreaweaver 8:Configuration
bjects:Common:Table.htm":
Type Error: cmdDOM.parentWindow.createTableStr is not a
function"
I can create tables only if I type the html for them by hand
into the code pane. The file that the error message references does
exist, and appears to look fine (code-wise). I've also tried
uninstalling and reinstalling DW8, removing and recreating the
Configuration Folder as well as the site prefs and site definitions
- nothing has cured this problem.
I am using DW8 v. 8.0.2 on a Mac Quad G5 running OS X 10.4.6.
I am positive that I did not have this problem, or any of the other
current problems, with DW MX , and I installed DW8 as a stand-alone
app so that I could still use MX if needed. This and the other
problems don't occur with MX but I would really like to get them
solved because 8 offers other benefits that I want to be able to
use.
I'm wondering if anyone else has had this problem and managed
to find a fix for it.

One of the two problems I am having (the other will also be
posted) is that I am no longer able to use Design View to Insert
Tables at all - I get the following error message: (I made a
printscreen of the error but not sure how to embed the picture in
this post so here is the message verbatim).
"While executing objectTag, the following JavaScript error(s)
occured:
At line 26 of file "Macintosh HD:Applications:Macromedia
Dreaweaver 8:Configuration
bjects:Common:Table.htm":
Type Error: cmdDOM.parentWindow.createTableStr is not a
function"
I can create tables only if I type the html for them by hand
into the code pane. The file that the error message references does
exist, and appears to look fine (code-wise). I've also tried
uninstalling and reinstalling DW8, removing and recreating the
Configuration Folder as well as the site prefs and site definitions
- nothing has cured this problem.
I am using DW8 v. 8.0.2 on a Mac Quad G5 running OS X 10.4.6.
I am positive that I did not have this problem, or any of the other
current problems, with DW MX , and I installed DW8 as a stand-alone
app so that I could still use MX if needed. This and the other
problems don't occur with MX but I would really like to get them
solved because 8 offers other benefits that I want to be able to
use.
I'm wondering if anyone else has had this problem and managed
to find a fix for it.

Inconsistency in table cell design binding

Hi All,
I have a strange issue. I have a table in which i am coloring the cells based on certain condition. Upon execution of a method , the color should change.
However color changes sometimes and sometimes it does not happen. For the times it doesn't not happen, the changes take effect after i refresh the window.
I have debugged and checked, the data is being populated properly and binding is also done.
Your help is appreciated.
Thanks,
Pris.

Hi,
Check ahve you follow same or not..
Create one attribute of type WDUI_TABLE_CELL_DESIGN and bind this table column celldesign property.
Based on condition you want design cell color..
code like this... i am using dropdown in one column, based on value select in this i am coloring cell.
DATA lo_nd_segment1 TYPE REF TO if_wd_context_node.
DATA lo_el_segment1 TYPE REF TO if_wd_context_element.
DATA ls_segment1 TYPE wd_this->Element_segment1.
data lt_segment1 type wd_this->elements_segment1.
DATA lv_segment TYPE wd_this->Element_segment1-segment.
data lr_column type ref to cl_wd_table_column.
* navigate from <CONTEXT> to <SEGMENT1> via lead selection
lo_nd_segment1 = wd_context->get_child_node( name = wd_this->wdctx_segment1 ).
* get element via lead selection
lo_el_segment1 = lo_nd_segment1->get_element( ).
lo_el_segment1 = WDEVENT->GET_CONTEXT_ELEMENT( 'CONTEXT_ELEMENT' ).
* get all declared attributes
lo_el_segment1->get_static_attributes(
    IMPORTING
      static_attributes = ls_segment1 ).
DATA : lv_dropdown type string .
data desnval type WDUI_TABLE_CELL_DESIGN.
lv_dropdown = ls_segment1-segment.
if lv_dropdown = 1.
    desnval = cl_wd_table_column=>e_cell_design-badvalue_medium.
endif.
if lv_dropdown = 2.
    desnval = cl_wd_table_column=>e_cell_design-criticalvalue_medium.
endif.
if lv_dropdown = 3.
    desnval = cl_wd_table_column=>e_cell_design-key_medium.
endif.
Cheers,
Kris.

Select all fields of a table while designing the layout of a query

Can some one tell me how to select all fields of a table at a single stroke while designing the layout of a query....this would greatly reduce the time spent to select each and every field of a table into the layout....
Thanks in advance

Hi,
Declare your internal table (Say it is itab).
Then :-
Select * from <tablename>.
Eg,.Select * from mara.
Then display it using:-
Loop at itab.
write:/ wa_itab. "Workarea.
endloop.
Thanks and regards,
Prerna

Unable to insert table in design view???

Im using Dreamweaver MX 6.0, been using it for a while
trouble free. Recently installed it on my new Vista laptop, install
went fine, program opens fine. I was in design view today, tried to
insert a table and was initially getting some weird error message,
but the table WAS created. After a few minutes I went to make a
change and the program crashed. Started Dreamweaver again, tried to
insert a table and nothing happens. I can click the insert table
button, try Insert >>> Table, and nothing happens, no
error message, nothing.
If I manually enter the code to create a table, I AM able to
do that, and I can edit it in design view, such as splitting a
cell, etc.. Anyone have any ideas? Thanks.
-Joey

> The build is 6.0.1714.0
ANN: 6.1 Updater on build 1714
Macromedia has been working with our customers to track down
the source
of problems a minority of users have been having with the ...
Dreamweaver MX
6.1 updater. Several users reported that the updater
incorrectly indicates
that it cannot find the Dreamweaver
application or executable file in the specified folder and
doesn't perform
the update. While researching this, we found that there were
several
different causes for similar issues. Those solutions are all
detailed in the
technote at:
http://www.macromedia.com/support/dreamweaver/ts/documents/dmx_updater_issues.htm.
However, we also noticed that many customers were trying to
update a build
of Dreamweaver MX, 1714, that was never legally released to
the public or
made available for purchase. The release version of
Dreamweaver MX 6.0 is
build 1722, and build 1714 was only released to a small group
of beta
testers under a non-disclosure agreement. Beta testers
received the final
build of Dreamweaver MX at the completion of the beta
program.
Because build 1714 is not a commercial release, it cannot be
updated and
should not be used for any purpose as it is not a legally
licensed version
of Dreamweaver MX. To purchase a copy of Macromedia
Dreamweaver MX, visit
our online store at:
http://dynamic.macromedia.com/bin/MM/store/US/home.jsp
Thanks to all customers who provided detailed information
that enabled us to
track down the installer issues much more quickly than we
could without your
help.
Matt Brown Dreamweaver and Contribute Community Manager
Sorry I can't help more than that.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Joey_330ci" <[email protected]> wrote in
message
news:[email protected]...
> Version 6.0.1714.0 Thanks!

Reg: Table's Design Property Alternating

Hi,
I'm having a table and i'm setting its design property as alternating.In the NWDS2004 its showing alternating colors in the table but when i deploy and run it in the browser its not reflecting there. its displaying the ordinary table with no changes in it.
please help me out how to solve this?
Regards,
Suresh

Hi,
You need to set the readOnly property of the table to true. This is how it worked for me for WDTableDesign.ALTERNATING.
But then you would not be able to do anything with the table.
Well i dont have idea why it works with readOnly property as true. May be displaying some kind of WD reports which is only for reading purpose(for which i have used).
thanks & regards,
Manoj

Table/Procedure Design Question

I'm trying to design some lookup tables in our 9i DB to enable users to lookup the meaning of return codes from an application. The output of the application is a list of 0 to 30 return codes. We have a table, CODES, that has a field for each return code type. I am now trying to design lookup tables for each type of return code that will store the meaning of each value. The meaning is more important than the one character value, so most queries will be of the type SELECT CODE_A.meaning FROM CODE_A WHERE code_value = (SELECT CODES.code_a FROM CODES WHERE) It works great for the 29 1-character codes, but it is the last code that is causing problems. The last return code is a string consisting of 0 to 10 2-character codes. There are 10 possible codes, and we have a lookup table, DPV_CODE, that has the 10 value/meaning pairs. The problem is that we would like to avoid having to parse this code string into the 2-digit codes in the SELECT query. Ideally, we would like to be able to query the DPV_CODE table with a the string of codes stored in the CODES table and have it return a concatenated string of the meanings of those codes. Is there a way to set a trigger or some other analogous procedure that will execute every time a SELECT is done on the DPV_CODE table? Is there another way to do this in the database? Or would it work better to do the parsing outside of the DB in the application code?

You could write a Function which returns a comma-delimited string. It could be called in your SELECT statement.
-cf

Generating table in designer

Hello,
When I try to generate my table I am getting this error message:
CDS-11006 Error: Unique Key 'CDS_IGP_UK2' has namespace conflict with Unique Key 'CDS_IGP_UK3'
Can someone tell me what this means and how to correct it?
Thanks
Cathy

Well, I don't know a way to do this directly, but I can provide you with 2 alternative solutions:
1-To generate a HTML file having the list u need. This can be done using Repository Reports. On the main window of Designer you find a button labeled "Repository Reports".
1-To transfer ERD into server model using Database Design Transformer, and then transfer this server model into an Oracle Database user, and then using Data Dictionary Views (USER_TABLES, USER_TAB_COLUMNS and etc.) you can select the information you need and put them into a table (CREATE TABLE x AS subquery;) Using Microsoft Access you can import data from this table and export them as a Microsoft Excel spreadsheet.This choice needs some effort but it enables you to put information into spreadsheet.
I hope this will be helpful.

LOV on item on 2nd level lookup table usages - Designer 6i

In Designer 6i, creating a module:
In a module component, I have a lookup table usage which in turn has a lookup table usage against it ...etc
e.g
MCO
- Base tab 1
- Lookup tab 1
- Lookup tab 2
- Lookup tab 3
Can I have an LOV fire up from and return into display items in lookup tab 2 and 3 ????
Currently the generator sets any item from those table which I make INSERTable, back to Display only.

Mr Short
unless the behaviour has been changed in 6i, its not possible.

How to find modules using a specific table in Designer 10g?

Hi, we are in a conversion traject from Designer 6.0 to Designer 10g with patchset 10.1.2.5.
Apart from a conversion problem for which we got a workaround (see bug number 8453702) it looks ok now.
But with functional testing I found something strange:
- in Des10g, when you look at the usages of a table, you do not see the "Used in Module Components" part anymore. That is pretty annoying. Now I found a way to show something with aid of the matrix diagrammer, but i'm not very happy with it.
My questions:
- How come this has changed? and
- is there another way to quickly view these usages, or are we stuck with this?
Regards, Paul.

Hello
Go to the repository object navigator. Go to the table definitions --> usages --> Used in sql query sets
Regards Erik

Table UI Design

Similar Messages

Maybe you are looking for