Table V_512w_o

Hi Gurus,
Table V_512w_o is used for what perpose? A little brief ans is expected.
Thanks in advance,
Riya

Hi, 
This is called as granddaddy table by SAP AG Trainers! Because it give single view all the important other tables like V_512w_B , V_512w_d.
Good luck 
Thanks,
Amosha
 "Known is a drop & unknown is an OCEAN!"

Similar Messages

What can be the probable errors in configuaration of salary cal. thru SAP

While calculating the TDS of the employees, we have observed the following:
1- System is deducting Medical reimbursement from the gross salary, if it is not included in the Gross
salary it should not be reduced from Gross Salary.
2- Children education allowance exemption is showing Rs. 1200/- PA but it should be 2400/- PA,
somewhere no exemption is showing.
3- Interest on furniture Loan is not showing in perk Value, earlier it was showing.
WHERE SHOULD WE LOOK OUT FOR THE PROBABLE ERRORS, I DONOT KNOW HR MODULE BUT AM FI SAP CERTIFIED FRESHER

Children education allowance exemption is showing Rs. 1200/- PA but it should be 2400/- PA,
somewhere no exemption is showing.
check infotype 21 here how many children ur maintaining
normally children exemption shd be 1200 if u want it to be 2400 make sure the constant value is same with this amount in V_T511P
System is deducting Medical reimbursement from the gross salary, if it is not included in the Gross
salary it should not be reduced from Gross Salary.
check the PCL for that medical reimbursement once in table V_512w_O
Edited by: Sikindar on Nov 21, 2008 10:32 AM

To show missing Evaluation Classes under SPRO screen

Hi,
I'm trying to view wagetype charecteristics/values via SPRO --> ..... --> Wage Types -> Processing Classes, Evaluation Classes, Cumulations -> Check user wage types
I noticed that few Evaluation Classes were not shown. I can see these Evaluation Classes via SM30, table
V_512W_O or via SE38, report RPDLGA40.
How can I display these missing Evaluation Classes via my SPRO screen? Thanks.
Regards

Hello
See if this is of some use - program RPDLGA20 run it as a tree structure, then you can expand the evaluation class node.
Cheers
Rona

Change in table

Hello..
I am not able to make changes in table V_T511P in sandbox client. A message is displayed "client 100 is not modifiable".
Please help..its need is urgently.
Regards
Swapna

Hi Swapna,
Are all the customization tables restricted to change ?
Try V_512w_O, T77S0 tables via SM30.
If all of them display the same message, then go to SCC4 and make the following settings:
Client role : Customizing
Changes & Transports : Automatic rec of changes
Cross-client object : Changes allowed
Regards,
Dilek

MB5B Report table for Open and Closing stock on date wise

Hi Frds,
I am trying get values of Open and Closing stock on date wise form the Table MARD and MBEW -Material Valuation but it does not match with MB5B reports,
Could anyone suggest correct table to fetch the values Open and Closing stock on date wise for MB5B reports.
Thanks
Mohan M

Hi,
Please check the below links...
Query for Opening And Closing Stock
Inventory Opening and Closing Stock
open stock and closing stock
Kuber

Error while dropping a table

Hi All,
i got an error while dropping a table which is
ORA-00600: internal error code, arguments: [kghstack_free1], [kntgmvm: collst], [], [], [], [], [], [], [], [], [], []
i know learnt that -600 error is related to dba. now how to proceed.
thanks and regards,
sri ram.

00600 errors should be raised as service request with Oracle as it implies some internal bug.
You can search oracle support first to see if anyone has had the same class of 00600 error, and then if not (and therefore no patch) raise your issue with Oracle.
http://support.oracle.com

Logical level in Fact tables - best practice

Hi all,
I am currently working on a complex OBIEE project/solution where I am going straight to the production tables, so the fact (and dimension) tables are pretty complex since I am using more sources in the logical tables to increase performance. Anyway, what I am many times struggling with is the Logical Levels (in Content tab) where the level of each dimension is to be set. In a star schema (one-to-many) this is pretty straight forward and easy to set up, but when the Business Model (and physical model) gets more complex I sometimes struggle with the aggregates - to get them work/appear with different dimensions. (Using the menu "More" - "Get levels" does not allways give the best solution......far from). I have some combinations of left- and right outer join as well, making it even more complicated for the BI server.
For instance - I have about 10-12 different dimensions - should all of them allways be connected to each fact table? Either on Detail or Total level. I can see the use of the logical levels when using aggregate fact tables (on quarter, month etc.), but is it better just to skip the logical level setup when no aggregate tables are used? Sometimes it seems like that is the easiest approach...
Does anyone have a best practice concerning this issue? I have googled for this but I haven't found anything good yet. Any ideas/articles are highly appreciated.

Hi User,
For instance - I have about 10-12 different dimensions - should all of them always be connected to each fact table? Either on Detail or Total level.It not necessary to connect to all dimensions completely based on the report that you are creating ,but as a best practice we should maintain all at Detail level only,when you are mentioning any join conditions in physical layer
for example for the sales table if u want to report at ProductDimension.ProductnameLevel then u should use detail level else total level(at Product,employee level)
Get Levels. (Available only for fact tables) Changes aggregation content. If joins do not exist between fact table sources and dimension table sources (for example, if the same physical table is in both sources), the aggregation content determined by the administration tool will not include the aggregation content of this dimension.
Source admin guide(get level definition)
thanks,
Saichand.v

Rendering xml-table into logical filename in SAP R/3

Hi,
I am trying to translate an xml-table with bytes into a logical filepath in SAP R3.
Do I have to use the method gui-download or shall I loop the internal xml-table?
When I tried to loop the xml-table into a structure, and then transfering the structure into the logical filename, I get problems with the line breaks in my xml-file. How do I get the lines to break exactly the same as I wrote them in my ABAP-code?
Edited by: Kristina Hellberg on Jan 10, 2008 4:24 PM

I believe you posted in the wrong forum.
This forum is dedicated to development and deployment of .Net applications that connect and interact with BusinessObjects Enterprise, BusinessObjects Edge, or Crystal Reports Server. This includes the development of applications using the BusinessObjects Enterprise, Report Application Server, Report Engine, and Web Services SDKs.
Ludek

Can you check for data in one table or another but not both in one query?

I have a situation where I need to link two tables together but the data may be in another (archive) table or different records are in both but I want the latest record from either table:
ACCOUNT
AccountID Name
123 John Doe
124 Jane Donaldson
125 Harold Douglas
MARKETER_ACCOUNT
Key AccountID Marketer StartDate EndDate
1001 123 10526 8/3/2008 9/27/2009
1017 123 10987 9/28/2009 12/31/4712 (high date ~ which means currently with this marketer)
1023 124 10541 12/03/2010 12/31/4712
ARCHIVE
Key AccountID Marketer StartDate EndDate
1015 124 10526 8/3/2008 12/02/2010
1033 125 10987 01/01/2011 01/31/2012
So my query needs to return the following:
123 John Doe 10526 8/3/2008 9/27/2009
124 Jane Donaldson 10541 12/03/2010 12/31/4712 (this is the later of the two records for this account between archive and marketer_account tables)
125 Harold Douglas 10987 01/01/2011 01/31/2012 (he is only in archive, so get this record)
I'm unsure how to proceed in one query. Note that I am reading in possibly multiple accounts at a time and returning a collection back to .net
open CURSOR_ACCT
 select AccountID
 from
 ACCOUNT A,
 MARKETER_ACCOUNT M,
 ARCHIVE R
 where A.AccountID = nvl((select max(M.EndDate) from Marketer_account M2
 where M2.AccountID = A.AccountID),
 (select max(R.EndDate) from Archive R2
 where R2.AccountID = A.AccountID)
 and upper(A.Name) like parameter || '%'
<can you do a NVL like this? probably not... I want to be able to get the MAX record for that account off the MarketerACcount table OR the max record for that account off the Archive table, but not both>
(parameter could be "DO", so I return all names starting with DO...)

if I understand your description I would assume that for John Dow we would expect the second row from marketer_account ("high date ~ which means currently with this marketer"). Here is a solution with analytic functions:
drop table account;
drop table marketer_account;
drop table marketer_account_archive;
create table account (
 id number
, name varchar2(20)
insert into account values (123, 'John Doe');
insert into account values (124, 'Jane Donaldson');
insert into account values (125, 'Harold Douglas');
create table marketer_account (
 key number
, AccountId number
, MktKey number
, FromDt date
, ToDate date
insert into marketer_account values (1001, 123, 10526, to_date('03.08.2008', 'dd.mm.yyyy'), to_date('27.09.2009', 'dd.mm.yyyy'));
insert into marketer_account values (1017, 123, 10987, to_date('28.09.2009', 'dd.mm.yyyy'), to_date('31.12.4712', 'dd.mm.yyyy'));
insert into marketer_account values (1023, 124, 10541, to_date('03.12.2010', 'dd.mm.yyyy'), to_date('31.12.4712', 'dd.mm.yyyy'));
create table marketer_account_archive (
 key number
, AccountId number
, MktKey number
, FromDt date
, ToDate date
insert into marketer_account_archive values (1015, 124, 10526, to_date('03.08.2008', 'dd.mm.yyyy'), to_date('02.12.2010', 'dd.mm.yyyy'));
insert into marketer_account_archive values (1033, 125, 10987, to_date('01.01.2011', 'dd.mm.yyyy'), to_date('31.01.2012', 'dd.mm.yyyy'));
select key, AccountId, MktKey, FromDt, ToDate
 , max(FromDt) over(partition by AccountId) max_FromDt
from marketer_account
union all
select key, AccountId, MktKey, FromDt, ToDate
 , max(FromDt) over(partition by AccountId) max_FromDt
from marketer_account_archive;
with
basedata as (
select key, AccountId, MktKey, FromDt, ToDate
from marketer_account
union all
select key, AccountId, MktKey, FromDt, ToDate
from marketer_account_archive
basedata_with_max_intervals as (
select key, AccountId, MktKey, FromDt, ToDate
 , row_number() over(partition by AccountId order by FromDt desc) FromDt_Rank
from basedata
filtered_basedata as (
select key, AccountId, MktKey, FromDt, ToDate from basedata_with_max_intervals where FromDt_Rank = 1
select a.id
 , a.name
 , b.MktKey
 , b.FromDt
 , b.ToDate
from account a
join filtered_basedata b
 on (a.id = b.AccountId)
ID NAME MKTKEY FROMDT TODATE
123 John Doe 10987 28.09.2009 31.12.4712
124 Jane Donaldson 10541 03.12.2010 31.12.4712
125 Harold Douglas 10987 01.01.2011 31.01.2012
If your tables are big it could be necessary to do the filtering (according to your condition) in an early step (the first CTE).
Regards
Martin

Can not insert/update data from table which is created from view

Hi all
I'm using Oracle database 11g
I've created table from view as the following command:
Create table table_new as select * from View_Old
I can insert/update data into table_new by command line.
But I can not Insert/update data of table_new by SI Oject Browser tool or Oracle SQL Developer tool .(read only)
Anybody tell me, what's happend? cause?
Thankyou
thiensu
Edited by: user8248216 on May 5, 2011 8:54 PM
Edited by: user8248216 on May 5, 2011 8:55 PM

I can insert/update data into table_new by command line.
But I can not Insert/update data of table_new by SI Oject Browser tool or Oracle SQL Developer tool .(read only)so what is wrong with the GUI tools & why posting to DATABASE forum when that works OK?

Not able to refresh the data in a table

Hi In my application i fill data in a table on clikc of a button ..
Following are the line of code i have user
RichColumn richcol = (RichColumn)userTableData.getChildren().get(0); (fetch the first column of my table)
richcol.getChildren().add(reportedByLabel); (reportedByLabel is a object of RichInputText)
AdfFacesContext adfContext1 = AdfFacesContext.getCurrentInstance();
adfContext1.addPartialTarget(richcol);
adfContext1.addPartialTarget(userTableData);
But on submit of that button table data is not refreshed after adding partial trigger on that table as well as that column also .... any idea??
Edited by: Shubhangi m on Jan 27, 2011 3:50 AM

Hi,
The Code that you have shown adds an additional inputText component to the first column of a table.
Is that your intention?
If yes, please use the following code snippet to achieve your functionality:
JSPX Code:
<af:form id="f1">
<af:commandButton text="Add Column" id="cb1"
actionListener="#{EmployeesTableBean.onAddColumn}"/>
<af:table value="#{bindings.Employees.collectionModel}" var="row"
rows="#{bindings.Employees.rangeSize}"
emptyText="#{bindings.Employees.viewable ? 'No data to display.' : 'Access Denied.'}"
fetchSize="#{bindings.Employees.rangeSize}"
rowBandingInterval="0"
selectedRowKeys="#{bindings.Employees.collectionModel.selectedRow}"
selectionListener="#{bindings.Employees.collectionModel.makeCurrent}"
rowSelection="single" id="t1"
binding="#{EmployeesTableBean.table}">
<af:column sortProperty="EmployeeId" sortable="false"
headerText="#{bindings.Employees.hints.EmployeeId.label}"
id="c1">
<af:outputText value="#{row.EmployeeId}" id="ot2">
<af:convertNumber groupingUsed="false"
pattern="#{bindings.Employees.hints.EmployeeId.format}"/>
</af:outputText>
</af:column>
<af:column sortProperty="FirstName" sortable="false"
headerText="#{bindings.Employees.hints.FirstName.label}"
id="c2">
<af:outputText value="#{row.FirstName}" id="ot1"/>
</af:column>
<af:column sortProperty="LastName" sortable="false"
headerText="#{bindings.Employees.hints.LastName.label}"
id="c3">
<af:outputText value="#{row.LastName}" id="ot3"/>
</af:column>
</af:table>
</af:form>
Bean:
public class EmployeesTableBean {
private RichTable table;
public EmployeesTableBean() {
public void setTable(RichTable table) {
this.table = table;
public RichTable getTable() {
return table;
public void onAddColumn(ActionEvent actionEvent) {
RichInputText newRichInputText = new RichInputText();
newRichInputText.setId("new");
newRichInputText.setValue("Name:");
RichColumn richcol = (RichColumn)table.getChildren().get(0);
richcol.getChildren().add(newRichInputText);
AdfFacesContext adfContext1 = AdfFacesContext.getCurrentInstance();
adfContext1.addPartialTarget(table);
Thanks,
Navaneeth

Unable to capture the adf table column sort icons using open script tool

Hi All,
I am new to OATS and I am trying to create script for testing ADF application using open script tool. I face issues in recording two events.
1. I am unable to record the event of clicking adf table column sort icons that exist on the column header. I tried to use the capture tool, but that couldn't help me.
2. The second issue is I am unable to capture the panel header text. The component can be identified but I was not able to identify the supporting attribute for the header text.

Hi keerthi,
1. I have pasted the code for the first issue
web
                         .button(
                                   122,
                                   "/web:window[@index='0' or @title='Manage Network Targets - Oracle Communications Order and Service Management - Order and Service Management']/web:document[@index='0' or @name='1824fhkchs_6']/web:form[@id='pt1:_UISform1' or @name='pt1:_UISform1' or @index='0']/web:button[@id='pt1:MA:0:n1:1:pt1:qryId1::search' or @value='Search' or @index='3']")
                         .click();
                    adf
                    .table(
                              "/web:window[@index='0' or @title='Manage Network Targets - Oracle Communications Order and Service Management - Order and Service Management']/web:document[@index='0' or @name='1c9nk1ryzv_6']/web:ADFTable[@absoluteLocator='pt1:MA:n1:pt1:pnlcltn:resId1']")
                    .columnSort("Ascending", "Name" );
     }

How to Activate the Table which Doesn't Exist - Can I create Table in SE11

Hi Gurus,
I am a BASIS Person ..so, I don't have much idea about ABAP Developement side . But, while applying patches to one of the SAP Component, I get the following error message ( usr\sap\trans\log ) :
Phase Import_Proper
>>>
SAPAIBIIP7.BID
1 ED0301 *************************************************************************
1 EDO578XFollowing objects not activated/deleted or activated/deleted w. warning:
1EEDO519X"Table" "WRMA_S_RESULT_DATA" could not be activated
1EEDO519 "Table Type" "WRMA_TT_UPDTAB_DSO" could not be activated
1 ED0313 (E- Row type WRMA_S_RESULT_DATA is not active or does not exist )
2WEDO517 "Domain" "WRMA_KAPPL" was activated (error in the dependencies)
2WEDO517 "Data Element" "/RTF/DE_FISCPER" was activated (error in the dependencies)
2WEDO517 "Data Element" "/RTF/DE_FISCVARNT" was activated (error in the dependencies)
2WEDO517 "Data Element" "WRMA_DE_RCLASV" was activated (error in the dependencies)
2WEDO517 "Data Element" "WRMA_DE_RMA_AMNT" was activated (error in the dependencies)
2WEDO517 "Data Element" "WRMA_DE_RMA_INV" was activated (error in the dependencies)
2WEDO517 "Data Element" "WRMA_DE_RMA_OBJ" was activated (error in the dependencies)
2WEDO549 "Table" "V_WRMA_TRCLASVER" was activated (warning for the dependent tables)
2WEDO549 "Table" "V_WRMA_TRCLASVPE" was activated (warning for the dependent tables)
2WEDO549 "Table" "V_WRMA_TRCLPERCL" was activated (warning for the dependent tables)
2WEDO549 "Table" "WRMA_S_STOCK_SELECTION_DATE" was activated (warning for the dependent tables)
<<<
Now, I checked Domain WRMA_KAPPL in SE11 and it diplays that it is partially active :
" The obeject is marked partially active for the following reasons :
 Errors occured when adjusting dependent Objects to a change. Some of the dependent objects could not
 be adjusted to this change. To adjust the dependent objects, you must perform the following actions
 the next time you activate this object.
 - SET THE SYNP TIME STAMP IN THE RUNTIME OBJECT OFALL DEPENDENT OBJECTS
My question is - how to activate this SYNP Time Stamp.. ?
 - Once I activate this SYNP Time Stamp.. How do I activate this ..in SE11 or some other
 TCode..
Any / ALL Help is highy appreciated and would be rewarded with appropriate Reward Points.
Thanks,
Regards,
- Ishan
>> Ok, Now I forcefully activated the Domain and then all the 5 Data Elements in SE11 ...now I have error
 that table WRMA_S_RESULT_DATA and WRMA_TT_UPDTAB_DSO Could not be activated...
 ..And in SE11 > Input the first / Second Table > Excute > Output : Table Does not Exist !!!
 - Now, How do I activate something which does not exist in the first place ?
 Any Input about this ?
Thanks,
Regards,
- Ishan
Edited by: ISHAN P on Jun 19, 2008 3:44 PM

Read note 1152612 - Incorrect component type in structure WRMA_S_RESULT_DATA.
The error occurs in Release BI_CONT 703 Support Package 9.
If you require an advance correction for Support Package 9, make the following manual changes if the InfoObject 0TCTLSTCHG is inactive in your system.
1. Use transaction RSA1 to call the Data Warehousing Workbench.
2. Check whether the InfoObject 0TCTLSTCHG was already activated by the compilation process the first time you called transaction RSA1. You can use transaction RSD1 to check this by entering 0TCTLSTCHG in the "InfoObject" field and choosing "Display". Proceed as follows if the InfoObject is still not active:
3. Go to BI Content activation.
4. Select "Object Types".
5. Open the "InfoObjects" tree and select "Objects".
6. Search for the InfoObject 0TCTLSTCHG and select it.
7. Transfer the object and activate it.
These steps activate the required component type /BI0/OITCTLSTCHG. You can check again in transaction RSD1 to ensure that the InfoObject 0TCTLSTCHG is available as active.
Jacek Fornalczyk

AND / OR truth table in SQL

why null is introduced in the AND and OR truth table?when will a statement/part of a statement return a null value??
|AND               |True          |False             |NULL??        |
|True               |True          |False             |Null             |
|False              |False          |False             |False           |
|Null                |Null             |Null               |Null             |is it introduced in AND/OR truth table for the null containing row(s)??
select employee_id,last_name,job_id,salary
from employees
wheere salary >= 1000
And job_id like '%man%';
how the statement after the where cluz can return null value??Edited by: sayantan chakraborty on Aug 14, 2009 11:36 AM

sayantan chakraborty wrote:
how either of X and Y will return a null value?can you put any example?is there any syntax/ command which will print the return value of a statement as null?Say you had a table with columns X and Y. As long as NOT NULL constraints WERE NOT defined these values could contain NULLs. Then if you apply the WHERE condition of X = Y you would have the case of NULL = NULL which results in UNKNOWN.
Simple Example:
SQL > WITH test_data AS
2 (
3          SELECT 1 AS X, 1 AS Y FROM DUAL UNION ALL
4          SELECT 2 AS X, 2 AS Y FROM DUAL UNION ALL
5          SELECT 3 AS X, 5 AS Y FROM DUAL UNION ALL
6          SELECT 4 AS X, 6 AS Y FROM DUAL UNION ALL
7          SELECT 1 AS X, NULL AS Y FROM DUAL
8 )
9 SELECT *
10 FROM    test_data
11 WHERE   X = Y
12 /
         X          Y
         1          1
         2          2

IF statement in Calculated Field for Share point, doesnt calculate sum in my Excel Pivot table.

Hi Everyone
I used this in SP calculated column field.
=IF([Shift Sched]="1pm to 10pm","0",IF([Shift Sched]="2pm to 11pm","1",IF([Shift Sched]="3pm to 12am","2",IF([Shift Sched]="4pm to 1am","3",IF([Shift Sched]="5pm to 2am","4",IF([Shift
Sched]="6pm to 3am","5",IF([Shift Sched]="7pm to 4am","6",IF([Shift Sched]="8pm to 5am","7",IF([Shift Sched]="9pm to 6am","8",IF([Shift Sched]="10pm to 7am","8",IF([Shift
Sched]="11pm to 8am","7",IF([Shift Sched]="12pm to 9am","6",IF([Shift Sched]="1am to 10am","5",IF([Shift Sched]="2am to 11am","4",IF([Shift Sched]="3am to 12pm","3",IF([Shift
Sched]="4am to 1pm","2",IF([Shift Sched]="5am to 2pm","1",IF([Shift Sched]="6am to 3pm","0",IF([Shift Sched]="7am to 4pm","0",IF([Shift Sched]="8am to 5pm","0",IF([Shift
Sched]="9am to 6pm","0",IF([Shift Sched]="10am to 7pm","0",IF([Shift Sched]="11am to 8pm","0",IF([Shift Sched]="12pm to 9pm","0"))))))))))))))))))))))))
it was able to work fine however my issue is when i extract the information to excel and use a pivot table the table is not able to calulate the sum of the value for this field. Can you please help me with this. this is for an Attendance traker for Night
Differential pay for employees. they create a daily log of their shift schedule and if i summarize this in pivot the value in the calculated field for this is not getting the sum.
Thanks,
Norman

Hi Everyone
I used this in SP calculated column field.
=IF([Shift Sched]="1pm to 10pm","0",IF([Shift Sched]="2pm to 11pm","1",IF([Shift Sched]="3pm to 12am","2",IF([Shift Sched]="4pm to 1am","3",IF([Shift Sched]="5pm to 2am","4",IF([Shift
Sched]="6pm to 3am","5",IF([Shift Sched]="7pm to 4am","6",IF([Shift Sched]="8pm to 5am","7",IF([Shift Sched]="9pm to 6am","8",IF([Shift Sched]="10pm to 7am","8",IF([Shift
Sched]="11pm to 8am","7",IF([Shift Sched]="12pm to 9am","6",IF([Shift Sched]="1am to 10am","5",IF([Shift Sched]="2am to 11am","4",IF([Shift Sched]="3am to 12pm","3",IF([Shift
Sched]="4am to 1pm","2",IF([Shift Sched]="5am to 2pm","1",IF([Shift Sched]="6am to 3pm","0",IF([Shift Sched]="7am to 4pm","0",IF([Shift Sched]="8am to 5pm","0",IF([Shift
Sched]="9am to 6pm","0",IF([Shift Sched]="10am to 7pm","0",IF([Shift Sched]="11am to 8pm","0",IF([Shift Sched]="12pm to 9pm","0"))))))))))))))))))))))))
it was able to work fine however my issue is when i extract the information to excel and use a pivot table the table is not able to calulate the sum of the value for this field. Can you please help me with this. this is for an Attendance traker for Night
Differential pay for employees. they create a daily log of their shift schedule and if i summarize this in pivot the value in the calculated field for this is not getting the sum.
Thanks,
Norman

Table V_512w_o

Similar Messages

Maybe you are looking for