Table where service PO and PR details will be avilable
Hi All,
In which table does details(like service master number,quantity,gross price and unit) of service PR and PO will sit.
Thanks in advance
Pavan
Hi,
Please check EKKO, EKPO for Service Order.
EBAN, EBKN is for Service PR & for Service in Service Order and Service Pr is ESLL.
Regards,
Mahesh Wagh
Similar Messages
-
Table where cost center assessment cycle details are saved
Hi,
Can anybody tell me what is the table where Cost center assessment cycle details like sender cost center,receiver cost center, assessment cost element, SKF etc... are saved?
Regds,
BijayHi,
Look at the T81* tables.
Regards,
Eli -
Reg: Table where can i get the details in warehouse Management
Hi All,
Would you please help to list down all materials in plant and warehouse 050 with below material mater data?
1. Warehouse
2. Plant
3. Material
4. Material description
5. Base Unit of Measure
6. WM unit
7. Unit of measure
8. Proposed UoM frm mat
9. Order Unit
Please let me know wher can i get the above details in taple with plant.
Thanks & Regards
SivaHi,
Check info as below:
1. Warehouse - Table MLGN
2. Plant - Table MARC
3. Material - - Table MARA
4. Material description - - Table MAKT
5. Base Unit of Measure - - Table MARA
6. WM unit - - Table MLGN
7. Unit of measure - Table MLGN
8. Proposed UoM frm mat - -???
9. Order Unit - table MARC
Hope this helps
Dheeraj -
Table where data of a Variant saved will be stored.
Hi All,
In normal Custom reports we will be saving some variants so that we can put the same variant after some time for executing the report. Variant will be having a unique name which will be stored in some table and the data(selection screen entries) which we are saving also will be saved some where in SAP tables. If any one of you has knowledge of those tables please help me out.
Thanks in advance,
Shyam.Hi
VARIT--> Variant texts
VARID--> Variant directory
Using values from Table TVARVC is especially useful in background processing. You do not have to create a new variant for each minor change of values or repeatedly change an existing variant, since you only have to change the values stored in TVARVC.
However, note that every change of a value in Table TVARVC affects all variants using this particular variable.
Reward all helpfull answers
Regards
Pavan -
Table names for Purchase and Production Details
Hi Gurus,
I want to create a report for list of purchased materials, materials under production and finished materials from Bill of Material..
Can any body tell me the table names..
Thanks in Advance,
ArunHi Arun,
These are the tables related to the material under production:
AUFK Production order headers
AFIH Maintenance order header
AUFM Goods movement for prod. order
AFKO Order header data PP orders
AFPO Order item
RESB Order componenten
AFVC Order operations
AFVV Quantities/dates/values in the operation
AFVU User fields of the operation
AFFL Work order sequence
AFFH PRT assignment data for the work order(routing)
JSTO Status profile
JEST Object status
AFRU Order completion confirmations
These are the tables related to purchase:
EKKO Purchase document
EKPO Purchase document (item level)
EINA Purchase info record (main data)
EINE Purchase info record (organisational data)
EBAN Purchase requisition
EBKN Purchase Requisition Account Assignment
These are the table related to the finished material related with BOM.
STKO BOM - header
STPO BOM - item
STAS BOMs - Item Selection
STPN BOMs - follow-up control
STPU BOM - sub-item
STZU Permanent BOM data
PLMZ Allocation of BOM - items to operations
MAST Material to BOM link
KDST Sales order to BOM link
Hope this will help.
Regards,
Thasneem. -
CRM tables for iBASE, Counter and pricing details.
Hi Everybody,
Can anybody help me with the name of the tables and the joining condition for iBASE, Counter and pricing agreement tables.
Say, I have only service contract number and GUID, to start with.
I'm looking for counter id and the reading, from iBASE. Then, using the pricing agreement, I want to convert the volume to an amount.
Regards,
Sanj.Hello,
Could you find a way out for creating counters in an IBASE component programatically?
Rgds
Priyanka -
Got 2 Problems Bonjour service errors and Billing Details
Hi,
I download itunes install it get to end of install and it flashes up with a a message saying bonjour service failed please can someone help with this,
I added my bank details to app store when i go to download now says bill confirmation and i enter my card details and it declines my card !!
any help would be appreciated
BekaboksHi bekaboks,
If you are getting an error message when installing iTunes that Bonjour is not starting, I would suggest that you troubleshoot using the steps in this article -
"Bonjour service failed to start, verify you have sufficient privileges" error message when installing - Apple Support
If you are having an issue with your card being declined for use with the iTunes store, you may want to use this article to help -
Pay an unpaid balance in the iTunes Store - Apple Support
Thanks for using Apple Support Communities.
Best,
Brett L -
Table where Material De and Open PO Nur can be found.
Dear All,
May I know what is Material De and Open PO Nur ?Please also state in which table above fields are found.
Thanks with regards,
S.SureshHi,
Table - MAKT
Material Descript
Table - EKKO
Field - EBELN Purchasing document number
Regards,
Chetan. -
Tables where the survey questionnaire and response information gets stored
Dear experts,
Could you please help me with the information on the tables where the survey and survey responses will get stored in the system?
Thanks and regards,
RanjanHi,
These are all talbes in SRM relates to Survey.
ROST_LANG_QSTN Language Selection for Question
ROST_PCAT_QSTN Assign Product Category and Questionnaire to Lan
ROST_SEL_PRODCAT Product Categories for Regis
ROST_WS_QSTN Web Survey Questionnaire
ROS_BP_PC_SURVEY Assign Vendor, Product Category, Survey
CRMD_IC_SCRATTR Script/Survey attributes (Interactive Script Editor)
ROST_WS_QSTN Web Survey Questionnaire
ROS_BP_PC_SURVEY Assign Vendor, Product Category, Survey
TUWS_SURVEY Survey
TUWS_SURVEY_LOG Survey Log
TUWS_SURVEY_PUB Survey Publishing
TUWS_TAROBJ Survey: Recipients
TUWS_TAROBJ_ATTR Survey: Recipient Attributes
Regards,
yaniVy
reward if helps -
Service tax and cess on freight for inventorised items
Hi all,
There is a scenario where service tax and cess is charged on freight line items in a PO for inventorised material. This had been incorporated in pricing procedure accordingly. But while doing a MIGO it is found that the service tax and cess are charged on the materials. This should not be charged to the material rather at the time of MIRO it has to be posted to a receivable account.
Can anyone suggest what configuration is required for this.
thanks in advance
asbinHi Ponraj,
i would like to know the solution in detailed. As Per my client requirement, i have separated VAT amount and posting into separated G/L account. but my problem is i have to pay tax on freight amount to government. The taxes on the freight will be different. since 25% from the freight amount is taxable. so 25% from the freight amount i have to consider and on that i have to charge 2% E.Cess and 1% secondary higher E.cess.
how could i configure this issue in SAP?
please help me on this issue.
regards
Appu -
i phones updated iso 8.01 all three phones will not connect to service provider and touch id
will not work APPLE HELP !!!!!!!!!
anyone know i fix as i have spent over 2000 pound on three phones that won't work
all three where working fine until the 8.01 updateApple just pulled the update because it is a major fubar! You will have to rollback your iPhone to the base iOS 8 using iTunes and Apple needs to seriously test its patches!
Update:
Simply connect your phone to iTunes and back up your data. Then, click the “Restore iPhone” button and follow the on-screen instructions. It’s a huge pain, but at least it’s better than having your shiny new iPhone turned into a big expensive iPod touch. -
Officejet Pro 8600 - Macbook Pro and Macbook Air will not print
Products:
HP Officejet Pro 8600
Macbook Pro (Mac OS X, Version 10.7.5)
Macbook Air (OS X, Version 10.8.2)
Question:
Why did my Macs initially print fine, but now will not print at all?
Full Story:
I have a wireless network at my house that consisted of a 30mb cable internet, Netgear 900n, HP Officejet Pro 8600, 2 Dell Laptops with Windows 7, a Lenovo Laptop with Windows 7, and Dell Tower with Windows 7 - All printed just fine.
The HP Officejet 8600 was added to my network about 2 months ago.
I added a Macbook Pro and a Macbook Air about 3 weeks ago. Both Macs printed just fine for about a week. Then suddenly they stopped. I spent about 2 hours on the phone with HP Service, and they finally said it must be my router. So I called Netgear. Netgear was useless! They wanted me to agree to charges for services before they would even discuss the issue.
Due to information provided by HP's service support, and because Netgear will not support their product, I promptly purchased a new router - an Apple Airport Extreme.
The Macs recognize the printer, will print if hardwired via a USB cable, but will not print wirelessly to the Officejet Pro 8600. The PCs print fine.
The frustration that is being felt is compound by the fact that the Macs printed just fine with the Officejet Pro 8600 2 weeks ago, and now the printer just shows "idle"... even with a new router. (see image below)
Please help, I appreciate any support.
As a side note, the HP Service rep was very friendly, and definitely tried to support the HP Product, which is much more than I can say about Netgear.
Thank you,
This question was solved.
View Solution.Hi,
More likely the issue related with Multicast, which Apple devices relies on to communicate with teh device through the network.
First try unplugging the router for 30 seconds.
Plug it back to the power and wait for 2-3 minutes.
Turn the HP printer Off and back On, then check for any difference.
If the same persists, try changing your router configuration as following
Note: the settings below are not related with the HP product, I provide you the steps as a best effor and those are only based on my own knowledge. you may try modifying the router settings at your own risk:
Open the router configuration page (can be found listed as the Default Gateway by clicking the Wireless icon on the printer, then print a network configuration report.
Click the Advanced tab.
Click the Setup option from the menu, then click on WAN Setup.
Make sure to uncheck the box next to Disable IGMP Proxying and Apply the changes.
Click the LAN Setup on the same Setup menu.
Set the RIP Version as RIP-2 and Apply the changes.
Reboot your router and then check for any change.
I hope you may find that information useful, you may also use the user guide below for further information:
http://www.downloads.netgear.com/files/GDC/WNDR4500/WNDR4500_UM_07DEC2011.pdf
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution -
Tables linking the invoice and accounting document
Hi,
Can anyone tell me tables linking the invoice and accounting details table BSEG?
Regards,
ShanuFollowing BSEG fields can be found in VBRK
MANDT
BUKRS
BELNR
GJAHR
ZUONR
VBUND
VBELN
ZTERM
ZLSCH
BVTYP
MSCHL
MANSP
MABER
STCEG
XEGDR
KKBER
KIDNO
BUPLA
Similarly following fields can be found in VBRP
MANDT
VBELN
thanks
G. Lakshmipathi -
Oracle Web Services Manager and Stateful Services
Hi,
I was wondering if anybody could help or provide guidance on stateful web services and the OWSM.
I've registered a stateful web service with the OWSM. I also selected the "Keep-Alive" option as well, but this prob. doesn't pertain to stateful web services. But it doesn't seem to register the fact that its a stateful web service. When I call it, I have a packet analyzer that looks at the TCP trace and no Session id is sent back in the headers on the client side, which is on a separate box. Obviously, running it directly with Java and Axis works fine.
We are using a gateway for the OWSM, not an agent. The web service is successful in getting called through OWSM but the problem is that no session information is sent back to client so subsequent calls fail b/c the web service requires the state and what the previous call was. This web service is a .NET service and resides on a different server/box than the Oracle SOA suite.
Are there any tutorials/information out there that would tell me how to register a stateful web service with the OWSM? Eventually we'd like to connect the OWSM to an ESB and that would require it to be stateful as well obviously.
Thanks again,
NathanOn OTN, documentation library. Search for Oracle Web Service Manager and there you will see the Extensibility Guide.
http://www.oracle.com/pls/as10131/drilldown?word=Oracle+Web+Services+Manager&wildcards=0&remark=federated_search -
Have a problem where I'll occasionally shift my computer (i.e. physically move it, say from the coffee table to my lap on the couch) and it will freeze and the screen will turn into a bunch of horizontal multicolored lines (closer to 100 lines than 5). Usually restarting (by holding the power button to turn it off) works. A few times that has resulted in the three beeps (RAM issue? -- I've since replaced my RAM [it *seemed* to stop it for a while, but maybe not]), but the second time it always works. Attempting to SSH into the computer during this state does not work. Please advise as to what to do/what reports I can run and post. I will take a pic next time it happens.
Here's this info:
Model Name: MacBook Pro
Model Identifier: MacBookPro7,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.4 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 3 MB
Memory: 8 GB
Bus Speed: 1.07 GHz
Boot ROM Version: MBP71.0039.B0B
OS 10.6.8Sounds like a problem with your GPU. Do you have an external display you could connect your machine to in order to test this? If the external display renders the same way, then your GPU is damaged. If the external renders fine, then the CPU display is damaged.
Maybe you are looking for
-
SSO not authorized: Authentication failed.
Dear Experts, I made a homogeneous system copy of my BI 70 prod to quality. I followed the steps according to the docs. After the system copy I did applying new licenses( ABAP, Portal, J2ee) , deleting old portal abap certficates, creating them on bo
-
Re: search help for distribution field name
hi to all, i had written like this select-options: s_manif for sood-objnam no intervals.i want a search help for this so that i want to select a distibution list names. how i can go head. please help me in this regard thanks sun Message was edited by
-
Attaching Script & Driver Program to Transaction QM03 (Quality Management)
Hi Experts, I have created a new script with a driver program. I need to attach it to tha transaction QM01, QM02, QM03. I have assingned it to the transaction & its working fine till the time of Print Privew. But When I give the Print command for tha
-
Hi, I am new to OAF.We have a requirement to change an LOV in iexpenses.Appreciate if someone could guide me on how this can be achieved. Regards, J
-
Trial won't redownload [ was . ]
I had downloaded the free trial I had to do a system restore regarding an unrelated glitch, now program trial won't re download. At all. It comes up with download assistant, then poof, disappears.