Table with fields containig more thn 300 characters

Hello Friends,
i want to create one ZTABLE and intht i want a field tht can store more thn 300 characters.
i have used string data type for the same but while activating the table its giving me error saying :
" Table contains more than 3 long string fields"
Pls suggest...
Sunny

hi
sunny ,
You can create table with field more than 300 characters but there should be one more field
which has to be primary key .
such as
create table ztest
in that create field MANDT type clnt size 3 primary key
name type String .
then change technical settings according to requirement .
Delivery maintenance
delivery class and Data Browser/Table View M
according to requirement .
Before activating table save technical setting and then activate .
Regards
deepak

Similar Messages

Uploading excel file into internal table with field length more than 255

I am trying to upload the data from an excel file through function module 'TEXT_CONVERT_XLS_TO_SAP'.
I have tested by changing the field type from string, and char2000.
But it is accepting only 255 chars from the cell content.
How to get the total content of the field if it is more than 255 char.

hi,
you can use any of the following procedures:
For uploading data from excel to internal table refer standard report RC1TCG3Z in se38 :
 or
You can use the FM 'ALSM_EXCEL_TO_INTERNAL_TABLE' itself. Please check if you have done it this way . But, this FM can be a little time consuming if the excel has large data, so you can use the FM u2018GUI_UPLOADu2019.
CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
 EXPORTING
 filename = p_file1
 i_begin_col = l_b1
 i_begin_row = l_c1
 i_end_col = l_b2
 i_end_row = l_c2
 TABLES
 intern = lt_data
 EXCEPTIONS
 inconsistent_parameters = 1
 upload_ole = 2
 OTHERS = 3.
 IF sy-subrc <> 0.
 MESSAGE e018 DISPLAY LIKE 'i'.
 ENDIF.
*---Removing the first heading fields from the file.
 IF NOT lt_data[] IS INITIAL.
 LOOP AT lt_data INTO lwa_data WHERE row = '0001'.
 DELETE lt_data.
 CLEAR lwa_data.
 ENDLOOP.
*---Inserting the data from file the internal table
 LOOP AT lt_data INTO lwa_data.
 CASE lwa_data-col.
 WHEN 1.
 wa_file_wicopa-serial = lwa_data-value.
 WHEN 2.
 wa_file_wicopa-blart = lwa_data-value.
 WHEN 3.
 wa_file_wicopa-bldat = lwa_data-value.
 WHEN 4.
 wa_file_wicopa-budat = lwa_data-value.
 ENDCASE.
 AT END OF row.
 APPEND wa_file_wicopa TO gt_file_wicopa.
 CLEAR wa_file_wicopa.
 ENDAT.
 CLEAR lwa_data.
 ENDLOOP.
 ENDIF.
 ENDIF.
 or
DATA: it_test TYPE STANDARD TABLE OF alsmex_tabline WITH HEADER LINE.
DATA :v_start_col TYPE i VALUE '1',
 v_start_row TYPE i VALUE '1',
 v_end_col TYPE i VALUE '256',
 v_end_row TYPE i VALUE '65536',
 v_text TYPE repti.
* Funtion Module to upload values from excel to the Internal table
CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
 EXPORTING
 filename = p_file
 i_begin_col = v_start_col
 i_begin_row = v_start_row
 i_end_col = v_end_col
 i_end_row = v_end_row
 TABLES
 intern = it_test
 EXCEPTIONS
 inconsistent_parameters = 1
 upload_ole = 2
 OTHERS = 3.
IF sy-subrc <> 0.
 MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
 Or
You can use FM u201CTEXT_CONVERT_XLS_TO_SAPu201D.
DATA : i_raw TYPE truxs_t_text_data.
CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
 EXPORTING
 i_field_seperator = 'X'
 i_tab_raw_data = i_raw
 i_filename = p_path
 TABLES
 i_tab_converted_data = itab
EXCEPTIONS
 conversion_failed = 1
 OTHERS = 2
hope it will help u
regards
rahul

I am facing problem with more then 300 'characters', charactristic def

Hi friends,
Any one help me for this issue.
We receiving data from source (SAP CRM) systems to SAP BW, Characteristic description is more then 300 Characters we want to report this in BEX.
Description of a characteristic from source system to BW will come more then 600 and may be more then 1000 characters it is not fixed.
Our problem is how to pull data into BW?
How to take Report on this pulled data?
Please suggest or give me idea how to resolve this Issue.
Regards
Mohan

Hello Mohan,
check these
Re: Long Text data to upload into BW
check these blogs
/people/sap.user72/blog/2006/05/27/long-texts-in-sap-bw-modeling
/people/sap.user72/blog/2006/06/03/long-texts-in-sap-bw-modeling-150-follow-up
/people/sap.user72/blog/2006/06/05/long-texts-in-sap-bw-displaying-in-bex-analyzer-introduction-to-excel-workbooks-formatting-part-i
/people/sap.user72/blog/2006/06/05/long-texts-in-sap-bw-displaying-in-bex-analyzer-introduction-to-excel-workbooks-formatting-part-ii
Best Regards....
Sankar Kumar
+91 98403 47141

External table is not accepting more than 255 Characters

Hi,
I'm new to External table.. Somehow External table is not accepting more than 255 Characters even though I'm using VARCHAR2(4000 BYTES).. Can you please help me..
CREATE TABLE DM_CL_ExterTbl_Project
project_name VARCHAR2(80 BYTE),
project_id VARCHAR2(20 BYTE),
work_type VARCHAR2(100 BYTE),
work_description VARCHAR2(4000 BYTE)
ORGANIZATION EXTERNAL
TYPE ORACLE_LOADER
DEFAULT DIRECTORY UTL_FILE_DIR
ACCESS PARAMETERS
records delimited by '#(_@p9#' SKIP 1
logfile 'pp.log'
badfile 'pp1.bad'
fields terminated by ','
OPTIONALLY ENCLOSED BY '"' and '"'LDRTRIM
missing field values are null
REJECT ROWS WITH ALL NULL FIELDS
project_name,
project_id,
work_type,
work_description
LOCATION (UTL_FILE_DIR:'TOG_Data_Extract.csv')
REJECT LIMIT UNLIMITED
NOPARALLEL
NOMONITORING
Thanks in advance..
~~Manju

I got the asnwer.. In the filed list I have to specify the datatype & it's Size otherwise by default it will take CHAR(255)..
work_type CHAR(4000) solved the problem..!!

How to create an internal table with fields from different sources

Hi.
I need to create an internal table where some of the fields are from a database table, and the other fields are user specified. How do i do that?
Example:
DB table ZTAB with fields ZTAB-FIELD1, ZTAB-FIELD2.
I want to create an internal table ITAB with the fields ZTAB-FIELD1, ZTAB-FIELD2 from ZTAB. In addition, I also want to have one more field RECORD_NO, which is not from ZTAB. How do I do it? Could I do something like below?
DATA BEGIN OF ITAB.
        INCLUDE STRUCTURE ZTAB.
DATA RECORD_NO TYPE I.
DATA END OF UPLINE.
Or, are there more efficient way of doing it? Thanks.

hi KIan,
go:
general type
TYPE : BEGIN OF ty_itab,
           field1 TYPE ztab-field1,
           field2 TYPE ztab-field2,
*your own fields here:
           field TYPE i,
           field(30) TYPE c,
           END OF ty_itab.
work area
DATA : gw_itab TYPE ty_itab.
internal table
DATA : gt_itab TYPE TABLE OF ty_itab.
hope this helps
ec

AMDP exporting table with fields from various sources

I am writing an AMDP that has an output table a list of employees and attributes. These attributes have various sources with various keys. If I cannot with any practicality construct this table with a single select statement, which given my search criteria, I probably can't, must I break my output table into multiple output tables that can be created with a single select?
I declare the structure of output table et_employees in the class as something like
      BEGIN OF ty_employee,
        emp_id(12)    TYPE c,
        emp_name(80) TYPE c,
        org_unit(8)   TYPE c,
        region(5)     TYPE c,
        country(3)    TYPE c,
        jb_prf_as     TYPE c,
        sol_gr_as     TYPE c,
        snippet(1000) TYPE c,
        score         TYPE integer,
      END OF ty_employee,
      tt_employes type table of ty_employee.
As far as I can tell, I cannot do an update et_employees in the method to modify individual fields. I can only do the select statement.
I see my choices as
elaborate select statement that I may or may not be able to construct (haven't thought this through but it may be doable)
more than one output table
create multiple local tables and then do a join on them for the output table.
I am seeing the last one as my best option.
To throw in an unrelated issue, AMDP procedure cannot seem to cope with a table that begins with a slash, e.g., /MRSS/D_SQP_ESTR. The USING statement is o.k. but any access in a select or inner join gets an error.

Hi Deborah,
let me do some assumptions on your problem and then try to help you:
Assumption A: You only like to query data from tables, which, I simply assume, are available in the ABAP data dictionary. In this case, I don't think there is a performance gain with AMDPs compared to OpenSQL, so just use OpenSQL and do joins on the relevant tables, leading to exaclty one resultset in the output.
Assumption B: You need the AMDP because you have a good reason and you like to query data from tables employee_source_a and employee_source_b for your resultset. In case yes, you can e.g. use "temporary" tables (don't declare them explicitly), e.g. use the construct like:
lt_employee_source_a = select ...from employee_source_a ...;
lt_employee_source_b = select ... from employee _source_b...;
et_employee = select ... from :lt_employee_source_a ... (inner/left outer) join lt_employee_source_b on...;
Or you could use the CE_JOIN function if that suits your SQLScript development better.
To elaborate a query statement for et_employee for without the lt_xxx tables is hard to say from your question - it should be posible if there are no nasty aggregations/calculations which prevent it :-).
There's no need to use two resultsets in the output in case that's not what you need in the application.
The option to have several resultsets is rather a feature of DB Procedures, which allow for several resultsets while a view/OpenSQL query can only give you one resultset.
Conclusion: You answered your question yourself, the last option seems to be the best option :-).
Concerning the "slash issue": Guessing around I'd propose to use quote the table name like "/MRSS/D_SQP_ESTR"... but just a guess. Could you please post the error message or open a second discussion on the issue?
Cheers,
Jasmin

Dynamic table with field type table

Hi,
I´m using "cl_alv_table_create=>create_dynamic_table" to create a dynamic table for ALV Grid.
But...I need to use colors in ALV, then I need to declare a field type LVC_S_SCOL in dynamic table from "cl_alv_table_create=>create_dynamic_table".
How can I declare this in fieldcat?
The code:
Creating dynamic table
DATA: table_agrup TYPE REF TO data,
 line_agrup TYPE REF TO data.
CALL METHOD cl_alv_table_create=>create_dynamic_table
 EXPORTING
 it_fieldcatalog = t_fieldcat
 IMPORTING
 ep_table = table_agrup
 EXCEPTIONS
 generate_subpool_dir_full = 1
 OTHERS = 2.
 ASSIGN table_agrup->* TO .
Printing ALV
CALL METHOD obj_grid->set_table_for_first_display
 EXPORTING
 is_variant = w_variant
 i_save = 'A'
 is_layout = w_layout
 CHANGING
 it_outtab =
 it_fieldcatalog = t_fieldcat
 it_sort = t_sort
 EXCEPTIONS
 invalid_parameter_combination = 1
 program_error = 2
 too_many_lines = 3
 OTHERS = 4.
Thanks.

It is not possible with the METHOD cl_alv_table_create=>create_dynamic_table to include another table inside that newly generated table.
I have tried to do it with the code and I got the dynamic table created after at the end of the program.
In the code,
<DYN_TABLE> has same effect as your <table> variable
<DYN_WA> has same effect as your <HEADER>
REPORT ZTEST_NP_DYNAMIC.
DATA: DY_TABLE TYPE REF TO DATA,
 DY_LINE TYPE REF TO DATA.
FIELD-SYMBOLS: <DYN_TABLE> TYPE STANDARD TABLE,
 <DYN_WA>,
 <DYN_FIELD>.
FIELD-SYMBOLS: <FS> TYPE ANY.
* To generate the Dyanmic table with the COLOR
DATA: LS_SOURCE TYPE STRING.
DATA: LT_SOURCE LIKE STANDARD TABLE OF LS_SOURCE WITH HEADER LINE.
DATA: L_NAME LIKE SY-REPID.
DATA: L_MESSAGE(240) TYPE C,
 L_LINE TYPE I,
 L_WORD(72) TYPE C.
DATA: L_FORM(30) TYPE C VALUE 'TABLE_CREATE'.
LT_SOURCE = 'REPORT ZTEST_SUBROUTINE_POOL.'.
APPEND LT_SOURCE.
LT_SOURCE = 'FORM TABLE_CREATE USING I_FS TYPE ANY.'.
APPEND LT_SOURCE.
LT_SOURCE = 'DATA: BEGIN OF LT_GENTAB OCCURS 0.'.
APPEND LT_SOURCE.
LT_SOURCE = 'DATA: BUKRS TYPE BUKRS. '.
APPEND LT_SOURCE.
LT_SOURCE = 'DATA: BKTXT TYPE BKTXT. '.
APPEND LT_SOURCE.
* you can add your fields here.....
LT_SOURCE = 'DATA: COLOR TYPE lvc_t_scol. '.
APPEND LT_SOURCE.
LT_SOURCE = 'DATA: END OF LT_GENTAB.'.
APPEND LT_SOURCE.
LT_SOURCE = 'DATA: POINTER TYPE REF TO DATA.'.
APPEND LT_SOURCE.
LT_SOURCE = 'CREATE DATA POINTER LIKE STANDARD TABLE OF LT_GENTAB.'.
APPEND LT_SOURCE.
LT_SOURCE = 'I_FS = POINTER.'.
APPEND LT_SOURCE.
LT_SOURCE = 'ENDFORM. '.
APPEND LT_SOURCE.
L_NAME = 'ZTEST_SUBROUTINE_POOL'.
CATCH SYSTEM-EXCEPTIONS GENERATE_SUBPOOL_DIR_FULL = 9.
GENERATE SUBROUTINE POOL LT_SOURCE NAME L_NAME
 MESSAGE L_MESSAGE LINE L_LINE WORD L_WORD. "#EC CI_GENERATE
ENDCATCH.
IF NOT L_MESSAGE IS INITIAL.
MESSAGE E000(0K) WITH L_MESSAGE L_LINE L_WORD.
ENDIF.
ASSIGN DY_TABLE TO <FS>.
PERFORM (L_FORM) IN PROGRAM (L_NAME) USING <FS>.
ASSIGN DY_TABLE->* TO <DYN_TABLE>.
* Create dynamic work area and assign to FS
CREATE DATA DY_LINE LIKE LINE OF <DYN_TABLE>.
ASSIGN DY_LINE->* TO <DYN_WA>.
Write: 'bye'.
Regards,
Naimesh Patel

Problems with retrieving data from tables with 240 and more records

Hi,
I've been connecting to Oracle 11g Server (not sure exact version) using Oracle 10.1.0 Client and O10 Oracle 10g driver. Everything was ok.
I installed Oracle 11.2.0 Client and I started to have problems with retrieving data from tables.
First I used the same connection string, driver and so on (O10 Oracle 10g) then I tried ORA Oracle but with no luck. The result is like this:
I'm able to connect to database. I'm able to retrieve data but from small tables (e.g. with 110 records it works perfectly using both O10 and ORA drivers). When I try to retrieve data from tables with like 240 and more records retrieval simply hangs (nothing happens at all - no error, no timeout). Application seems to hang forever.
I'm using Powerbuilder to connect to Database (either PB10.5 using O10 driver or PB12 using ORA driver). I used DBTrace, so I see that query hangs on the first FETCH.
So for the retrievals that hang I have something like:
(3260008): BIND SELECT OUTPUT BUFFER (DataWindow):(DBI_SELBIND) (0.186 MS / 18978.709 MS)
(3260008): ,len=160,type=DECIMAL,pbt=4,dbt=0,ct=0,prec=0,scale=0
(3260008): ,len=160,type=DECIMAL,pbt=4,dbt=0,ct=0,prec=0,scale=1
(3260008): ,len=160,type=DECIMAL,pbt=4,dbt=0,ct=0,prec=0,scale=0
(3260008): EXECUTE:(DBI_DW_EXECUTE) (192.982 MS / 19171.691 MS)
(3260008): FETCH NEXT:(DBI_FETCHNEXT)
and this is the last line,
while for retrievals that end, I have FETCH producing time, data in buffer and moving to the next Fetch until all data is retrieved
On the side note, I have no problems with retrieving data either by SQL Developer or DbVisualizer.
Problems started when I installed 11.2.0 Client. Even if I want to use 10.0.1 Client, the same problem occurs. So I guess something from 11.2.0 overrides 10.0.1 settings.
I will appreciate any comments/hints/help.
Thank you very much.

pgoel wrote:
I've been connecting to Oracle 11g Server (not sure exact version) using Oracle 10.1.0 Client and O10 Oracle 10g driver. Everything was ok.Earlier (before installing new stuff) did you ever try retrieving data from big tables (like 240 and more records), if yes, was it working?Yes, with Oracle 10g client (before installing 11g) I was able to retrieve any data, either it was 10k+ records or 100 records. Installing 11g client changed something that even using old 10g client (which I still have installed) fails to work. The same problem occur no matter I'm using 10g or 11g client now. Powerbuilder hangs on retrieving tables with more than like 240 records.
Thanks.

SQ01 Output fields having more than 255 characters

Hello,
I need to show query output more than 255 charaters but system is not allowing
Here is the Error message:
List is wider than 255 characters (generation not possible)
I used SQ01 as t-code to create query.
How can i show my output more than 255 characters
Thanks

Refer SAP Note 857823, ALV grid cannot display more than 128 characters per field and will truncate all the characters beyond if it's an ABAP program
From my experience it will not display the field at all in SQ01.
You need to write an abap program and split the field into two fields of length 128 and display side by side.
Work around: If you cannot write abap program uncheck (no display in query) that field in SQ02 and generate it. Execute your query and copy the key field use se16n to input in the key fields and use import to excel sheet function to get the required data.

To search for tables with fields

hey hi!!
can anybody tell me the name of tables frm dose i can find fields for values of goods rteceived and issued in particular time period and also number of units of goods in that period.
regards,

vague...your requirement
try to search for tables by fields with se16 and table DD03L
A.

Create Internal table with fields coming as query result of multiple tables

Hi
I want to create internal table with the fileds which come as a result of a select query from multiple tables

My code is something like this. I need the data from various fields of diff tables depending on the excel file. This data is then to be put in a internal table
*& Report Z_EXTC
report z_extc.
type-pools : abap.
parameter: objname(25) type c.
data : idetails type abap_compdescr_tab,
 xdetails type abap_compdescr.
data : ref_table_des type ref to cl_abap_structdescr.
data: p_table type string.
data:l_string type string,
 l_filename(200) type c,
 dy_line type ref to data,
 xfc type lvc_s_fcat,
 ifc type lvc_t_fcat.
types:begin of itab,
 tabname type dd03l-tabname,
 fieldname type dd03l-fieldname,
 end of itab.
types:begin of atab,
 tabname type dd03l-tabname,
 cnt type string,
 end of atab.
field-symbols: <dyn_table> type table,
 <dyn_table1> type standard table,
 <dyn_wa>,
 <dyn_field>.
data: dy_table type ref to data,
 dy_table1 type ref to data.
data: itab1 type itab occurs 0 with header line.
data atab1 type atab occurs 0 with header line.
data frstrec type i value 0.
data lastrec type i value 0.
l_string = ''.
call function 'GUI_UPLOAD'
exporting
 filename = 'C:\excel_files\FIELDS_CC.TXT'
 filetype = 'TXT'
 has_field_separator = 'X' .
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
*Refresh itab1.
loop at itab1.
on change of: itab1-tabname.
 if lastrec = 1.
 move l_string to atab1-cnt.
 move itab1-tabname to atab1-tabname.
 append atab1.
 l_string = ''.
 endif.
 move itab1-tabname to atab1-tabname.
 frstrec = 1.
endon.
if frstrec = 1.
 concatenate l_string itab1-fieldname into l_string separated by
space.
 lastrec = 1.
endif.
*write:/ itab1-tabname,40 itab1-fieldname.
endloop.
move l_string to atab1-cnt.
append atab1.
loop at atab1.
write:/ atab1-tabname,5 atab1-cnt.
endloop.

Sum for Dynamic Fields in a Dynamic Table with Field Symbol

Hi All,
I currently have an report which I am looking to update with some totals. The information is currently output in an ALV which is fed data from a dynamic table defined with a field symbol. The modification that needs to be applied is a summation per currency code where each of the fields to be summed is a dynamically named field at runtime. I am now just looking to see if anyone has any recommendations on how to obtain these totals it would be appreciated. I have no problem doing the leg work in piecing the solution together but am just stuck on which approach I should be investigating here. I have looked into several options but do to the fact that the totals are for dynamic fields in a dynamic table and it is a field symbol I am having some difficulties thinking of the easiest approach to obtain these totals.
Below is a simple sample of what the report currently looks like and what we are looking to add.
====================================================================================
As-Is Report:
DETAILED DATA ALV
Company Code | Plant | 2006 Total | 2007 Total | 2008 Total | CURRENCY
0001          |   ABCD |    1,500     |    1,200     |    1,700    |    USD
0001          |   BCDE   |    2,300     |    4,100     |    3,600    |    GBP
0003          |   DBCA |    3,200     |    1,600     |    6,200    |    USD
Addition 1:
TOTALS PER CURRENCY
Currency                | 2006 Total | 2007 Total | 2008 Total |
USD              |    4,700     |    2,800     |    7,900    |
GBP                       |    2,300     |    4,100     |    3,600    |
Addition 2:
CONVERSIONS TO USD
                                      | 2006 Curr   | 2006 USD    | 2008 Curr   | 2006 USD   |
USD                       | 4,700 USD   | 4,700 USD   | 7,900 USD | 7,900 USD |
GBP   (1.5GBP/1 USD)    | 2,300 GBP   | 1,150 USD   | 2,300 GBP | 1,800 USD |
====================================================================================
Any recommendations will be appreciated.

Hi,
We cannot use the key word SUM in the loop at assigning statement.
The way i see is
When you are creating the first dynamic internal table , create one more with the structure below:
Currency | 2006 Total | 2007 Total | 2008 Total |
Then while populating the data into first itab,also move the contents to the second itab using collect statement.

Dynamic Internal table with field symbol

I made the report where the user enters two different tables and two fields that are to be compared.
Eg. If I enter (MARA & NAME1) and (MARC & NAME2) , I wish to compare all the entries of Mara-name1 against all entries in Marc-name2.
The code I need to write is:
DATA:
gdo_data TYPE REF TO data.
DATA:
gdo_data1 TYPE REF TO data.
FIELD-SYMBOLS:
<gt_itab> TYPE table,
 <wa> LIKE <gt_itab>, "<gt_itab>,
<gs_entry> TYPE ANY.
FIELD-SYMBOLS:
<gt_itab1> TYPE table,
 <wa1> LIKE <gt_itab>, "<gt_itab>,
<gs_entry1> TYPE ANY.
PARAMETERS:
p_table TYPE tabname, " DEFAULT 'KNA1',
p_fld TYPE fieldname. " DEFAULT 'KUNNR'.
PARAMETERS:
p_table1 TYPE tabname, " DEFAULT 'KNA1',
p_fld1 TYPE fieldname.
DATA: var TYPE fieldname.
var = p_fld.
DATA: var1 TYPE fieldname.
var1 = p_fld1.
START-OF-SELECTION.
CREATE DATA gdo_data TYPE TABLE OF (p_table).
ASSIGN gdo_data->* TO <gt_itab>.
CREATE DATA gdo_data1 TYPE TABLE OF (p_table1).
ASSIGN gdo_data1->* TO <gt_itab1>.
SELECT * FROM (p_table) INTO CORRESPONDING FIELDS OF TABLE <gt_itab>.
SELECT * FROM (p_table1) INTO CORRESPONDING FIELDS OF TABLE <gt_itab1>.
 LOOP AT <gt_itab> ASSIGNING <gs_entry>.
 READ TABLE <gt_itab1> ASSIGNING <gs_entry1>
 WITH KEY (var1) = <gt_itab>-(var).
 IF sy-subrc EQ 0.
 MESSAGE 'Success' TYPE 'S'.
 ENDIF.
ENDLOOP.
END-OF-SELECTION.
But the portion in bold is creating error: <gt_itab> is a table without a header lineand therefore has no component called "".
please help.

Hi Amit
Try like this
LOOP AT <gt_itab> ASSIGNING <gs_entry>.
READ TABLE <gt_itab1> ASSIGNING <gs_entry1>
WITH KEY (var1) = <gs_entry>-(var).
IF sy-subrc EQ 0.
MESSAGE 'Success' TYPE 'S'.
ENDIF.
ENDLOOP.
Regards,
Atish

Transport table entries directly from table with field added from append S

Hi
Guys, I have changes one standard table , I mean I use append structure and add a new field in to that . As this is T* ( text table ) , it also V ( view ) but as I change the field in T* table . I went in to table and maintain entries directly into table . After that I go to menu and select all the entries and as I want to push it to my test client . I create the entries and then I transport it to test . When I saw the table that entries were missing. Then I saw my existing transport in SE10 & SE09 and I notice it just transport the Keys fields content and its not transporting the new field content which I add as append structure .
Do you guys have any idea .how to transport those entries?
Cheers
Usman

Itll behave in the same way , even you give "*" in your transport . Do one thing go to table, double click on your structure and once youre in structure Go to->Extras->Enhancement category
And select radio button 1 or 2 and try again 
Hope thisll give you idea!!
Pl... award the points.
Good luck
Thanks
Saquib Khan
"Some are wise and some are otherwise"

Excel 2007 to Sql server table. Column with more than 255 characters.

Hi there,
I am facing a problem while converting data from Excel 2007 to SQL server 2005 table. I am using BIDS 2005.I have an excel file where one particular column has more than 255 characters. I use OLEDB connection for excel file as there is no driver for Excel
2007 in BIDS2005. I am using Microsoft Office 12.0 Access Database Engine OLE DB Provider for Excel file.
Next, I changed advanced properties for the column to DT_NTEXT. But when I am getting errors on execution. They are:
[OLE DB Source [1949]] Error: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E21.
[OLE DB Source [1949]] Error: Failed to retrieve long data for column "action".
[OLE DB Source [1949]] Error: There was an error with output column "action" (2046) on output "OLE DB Source Output" (1959). The column status returned was: "DBSTATUS_UNAVAILABLE".
[OLE DB Source [1949]] Error: SSIS Error Code DTS_E_INDUCEDTRANSFORMFAILUREONERROR. The "output column "action" (2046)" failed because error code 0xC0209071 occurred, and the error row disposition on "output column "action"
(2046)" specifies failure on error. An error occurred on the specified object of the specified component. There may be error messages posted before this with more information about the failure.
Please advise on how can I deal with columns having more than 255 characters in Excel file.
Thanks!

Here is what your connection string should look like for excel source
Provider
=Microsoft.Jet.OLEDB.4.0;Data
Source=c:\temp\test.xls;Extended
Properties="EXCEL 8.0;HDR=YES";
http://sqlworkday.blogspot.com/

Table with fields containig more thn 300 characters

Similar Messages

Maybe you are looking for