Table ZL (time processing) in payroll run

Dear Expert,
I have a question regarding processing time data (negative time) without time evaluation. So the time data processing included in payroll (sub schema time data processing). Even though table ZL is being processed but when the payroll run finish its process I cannot find result ZL in time cluster C2. I want to make a report based on this table. The question is how come i can take the result ZL if the situation as stated above?
Super Thanks,
Dave

Hi Federico,
I totally miss that part. Super thanks for your help.
Best Regards,
David

Similar Messages

Can we debug the Rule durring payroll run ?

Hi SAP-HR Experts .
Dear Sir can we debug the Rule durring payroll run ?
I meant to say that if we put many break points i std program of PE02 .
and run the payroll of a employee then why system processing do not stops on
thsoe break points ????
i want to see how a rule processed durring payroll run .?
Any help / suggestions urgently required ..........
Kind regards : rajneesh .

Hy RM!
The follow includes are used to control RULES inside report payroll driver (HXXCALC0).
You can try, using break points inside this:
include rpcbof00.        " operations
include pcbofbr0.        " OPERATIONS BEGIN-WHILE for special country
include rpcbu109.       " OPERATIONS SUB-Routines 1
include rpcbu209.       " OPERATIONS SUB-Routines 2
include rpcbu309.       " OPERATIONS SUB-Routines 3
include rpcbu409.       " OPERATIONS SUB-Routines 4
include rpcbu500.       " OPERATIONS SUB-Routines 5 travelling expens.
include rpcbu600.       " OPERATIONS SUB-Routines   incentive wages
include h99cavera.      "LIN (ADDED) New average functionality
include h99cavera_old."don't use old average oeration MEANV "XUL
include rpcbua09.        " Accruals                      "YLHAHRK006605
Regards!

Data from Infotypr 9 is not reflecting in BT table after payroll run

Hi All,
When we are running the Payroll Run for a period the data for bank details is not reaching correctly in BT table.
Infact the Bank key is coming wrong in BT table this is causing wrong Bank Name getting printed on the Renumeration slip.
Can you please suggest is there a setting from where these details are picked from. Or what can be other problem areas.
Regards,
Vidya.

Hi,
You can go to tcode FBZP and click on house bank. You can see the banks maintaned here.
Reward If Useful

Can I change a process flow at run time??

Hello everybody,
I work in Oracle BPMS 11.1.1.5. I need to change a process flow at run time due to changes in the business logic, I mean add, delete and modify tasks, navigation flow, etc. I know business rules can be modified using Oracle BPM Composer, but I couldn't find the way to modify the process flow. I have seen other BPMS, like BizAgi, for ex. that can do that. Do Oracle BPMS have that functionality? Please I need it a lot!!!!
Regards and thanks in advance,
isabelbernely

Hi
As JonPetter mentioned, you can get this and preferably get only from Support. I hope you have some license if you going to prod with this. Use that and if possible talk to your sales guy and create a support account. Then request the feature pack. The thing is, if we put it in some public shared location, it is the violation of using the oracle product. Unless someone takes risks they may upload but still its not advisable.
Sorry
Ravi Jegga

HOW TO create a temp table or a record group at run time

i have a a tabular form and i dont want to allow the user entering duplicate
records while he is in insert mode and the inserted records are new and not exsisting in the database.
so i want to know how to create a temp table or a record group at run time to hold the inserted valuse and compare if they are exsiting in previous rows or no.
please help!

As was stated above, there are better ways to do it. But if you still wish to create a temporary block to hold the inserted records, then you can do this:
Create a non-database block with items that have the same data types as the database table. When the user creates a new record, insert the record in the non-database block. Then, before the commit, compare the records in the non-database block with those in the database block, one at a time, item by item. If the record is not a duplicate, copy the record to the database block. Commit the records, and delete the records in the non-database block.

Payroll Run processing error out with PTO element

I have created new payroll and trying to process first payroll of employee but when we are processing with PTO element it is getting error out below error.
UDF Error in formula PTO_NONEXEMPT_VACATION_ORACLE_PAYROLL at line 45: Value exceeded allowable range (line 133 of XXRAC_PTO_HD_ANNIVERSARY_BALANCE)
Thank You
Nitin Maheshwari

Benjamin,
               there are several ways to reprocess the structure of a SSAS 2005 object.
               In my example I use an SSIS 2005 processing task in an ETL package, but the simplest way is:
               Log on to the database using SQL Server Management Studio 2005; Open the cubes tree under your database, and right-click one of the cubes; Choose "Process" from the context menu and then another window will open. This window should show your cube name and then some options; Under "Process Options", change the default option (I think it's "Process Full") to "Process Structure". Click "OK" and the structure of your cube should be reprocessed, correcting the error.
               Some observations: You might have to do this first for all the dimensions, because the cubes depend on them, and you also might have to do it one object at a time through this method. Through an SSIS 2005 package, you are able to do this in batch using a special SSAS processing task.
               Let me know if you solved your problem.
Bruno

Prevent Mutiplues Retry Payroll Run at Assignment Process Results -disable

Hi
I would like to know how I can disable the "Retry checkbox" at Assignment Process Results form.
We need to prevent the users form do multiple retries to their payroll run , also I know that if the user delete the queried payroll does this will roll his related payroll run data or not , and if that true how I can prevent that also .
Thanks
Bassem

thanks
so , how i can prevent that .
and i need also to make users have (query/read)only privileges.
bassem

Elements does not process in the Payroll run

We are trying to process 3 elements that have been defined in an Element Set for the employees that are present in the Assignment Set with Amendment set to 'INCLUDE'.
If i manually attach the elements to the employee and run a Quick pay then system computes the figures using the fast formula.
But strange enough when i run a Payroll Run process using following navigation :
View >Requests > Submit a New Request >Single Request >Ok> Payroll Run
With selecting my parameters for:
Payroll
Consolidation Set
Pay Period
Element Set
Assignment Set
Run Type
I am getting values as 0.00
i am totally shocked what is happening???
pls assist

I know why it is so...
its because i was using ASG_RUN balance to compute the Allowance.

SAP HANA runs based on Reat time processing or Batch Processing

i) SAP HANA runs based on Reat time processing or Batch Processing or any other processing ?
Kindly provide the answer ____________________
ii) Which two new developement technologies led to growth of SAP HANA ?
a.) Columnar Structure
b.) Mulicore processing
c.) RDBMS
Kindly provide the anser _____________
Thanks,
Vigram.

Hi Vigram,
SAP hana runs based on real time, batch... etc,
Also SAP HANA gets benefit of both columnar and Multicore processing.

Process Chain excessive run time

Hi all
Would like to know if any of you have experienced what we are experiencing.
We have a process chain that runs every night. It is running the same master data which usually only takes seconds.
However, on occassions, the same amount of data is taking over 18 hours to load.
When we look on monitor in the detail tab, it shows that it has only taken seconds but the header tab is showing 18 hours. This then delays any other subsequent process chains from being kicked off.
We are investigating as to why this is happening but any comments would be appreciated.
thanks in advance
Sandra

Hi Sandra,
I can suggest you few things which may help u...
1) Increase the parallel processing during extraction
2) Selective loading.
3) Every job will be having a priority (A, B, C A being the highest and C being the lowest), choose this based on your scenario.
4) Check with basis for the sizing of your server.
5) You can increase the number of background processes during data loads. This can be done by making dialog processes as Background processes.
For this you need basis inputs. (This is done in some profile settings by making the system behave differently during loads. (something like day mode/night mode))
6) There are some maintenance jobs that should run regularly in any SAP box to ensure proper functioning.
7) Use of start routines is preferred instead of update routines.
Assign points if these help u...
Regards,
KK.

How to setup process chains to run during office times every 30 minutes

I want to set up a process chain to run only during 8 am to 6 pm MST every 30 minutes. How do I do such a setting in the process chain?
Regards
Ram

Hello,
You can do this by creating a daemon chain which runs once every 30 mins and triggers a event.
You can use the event triggered by the daemon chain in the start variant of the PC which you require to run every 30 mins.
But before doing that, make sure that one run of your process chain completes definetly in 30 mins.
Let me know if you are looking for additional information.
Cheers,
MS.

I have Lookout 6.5 running with Windows 7, the process has been running for about 2 months with no problems, but today the Citadel stopped working! I am having a hard time getting it started again, need help!

I have Lookout 6.5 running with Windows 7, the process has been running for about 2 months with no problems, but today the Citadel stopped working!
How could this have happened and what can I do to get it running again?

Didnt realize there was a response, late getting back to you.
Save your process files outside of the NI progam directory (you should have external backups already right ). THey should not be deleted.
Any customizations to the lookout.ini and lookout.sec file may be lost.
Mike
Forshock - Consult.Develop.Solve.

Prepayment - payroll run link

How to link the prepayment to the payroll run? Meaning I run the payroll run for adhoc payments multiple times in a month, and for each payroll run, I need to run the prepayment and send the payment file to the bank each time, I got all the info needed for the bank in the prepayment table, but how do I link this with the payroll run?

I'm not sure about GB legislation but typically the Magnetic Transfer is run after the Pre-Payments process. This will generate a bank output file in a secure directory and you can use it to process bank transfers for your employees.
As far as the payroll_action_id is concerned, you should find this information in the table pay_action_interlocks.

Time Management without Payroll?

Has anyone implemented Time Management without Payroll? I am in the process of coming up with a design on retrieving payable hours from the B2 cluster and send them to an external payroll system. The problem I am running into is knowing what has changed (if hours were added or deleted in the past) without having to keep my own version of the cluster the last time Time Eval was run and comparing to this time.
Any help is appreciated...

I had this problem view years ago (Release 4.0)
You have to use the Report RPTEZL00 to made the wagetypes for the other payroll - the problem was the table T599Z - that is used to translate the SAP LGA into the other LGA - the check ends in both times in T512W

Can you use two tax classes in the same payroll run?

Hi,
I have a wage type that is currently set to Tax Class 1 (fully taxed) for processing class 71, I need to change it to tax class 7 (Withholding and SUI only) and have it computed as part of the regular payroll run and also by itself using offcycle.
When I have it set as Tax Class 1, all is well, when I change it to tax class 7, I get the error...
BSI Messages and Status 4101 CAN NOT PROCESS DUPLICATE RESIDENT STATE FED
This is the first time we're using this tax class and I think i have it set up correctly in the tax model but am not for sure.
Any suggestions? I'd really appreciate some guidance as I've looked
Thanks!
Stephanie Abrahamson

I think you should not change the PRCL 71 from 1 to 7 wide open. Start it with begin date of pay period you want and keep the history with PRCL 71 1.
As well check the config of tax model.
Arti

Table ZL (time processing) in payroll run

Similar Messages

Maybe you are looking for