TableLayoutPanel row height adjustment for dynamic row

Dear all,
i use a tablelayoutpanel to populate a calendar display.
As the row are generated dynamically during run time.
I would like to know how do i adjust the height in runtime for those row generated during runtime
I notice after the table populated, the row count always to return one

example :
For i = 0 To table.Rows.Count - 1
table.RowStyles.Add(New RowStyle(SizeType.Absolute, 100))
Next
This would set a 100 px height for each row.
Nimzozo, from France.

Similar Messages

Table row height adjustment

I am attempting to insert a table to create an online
business directory for my city. When I enter the table, it allows
me to set my number of columns and rows, as well as the table
width. However, it automatically sets the row height to 240 pixels.
When I try to change the row height to something more reasonable,
it gives me this error message:
"Making this change would require changing code that is
locked by a template or translator. The change will be discarded."
Which I assume means something I did when creating my
template for my website locked this in, but I have no idea what I
did or how to fix it. Any ideas??
Thanks so much!!

That's ok so far. A paragraph sign at the end of a text forces a new line.
To change that do the following:
For every condition you need another condition just for the paragraph sign that comes immediately after the condition. Not after every paragraph of one condition, but at the end of every consecutive numbers of paragraphs of the same condition.
So in your third example you'll need two conditions more:
1. One for the paragraph sign at the end of condition "meaasurements"
2. One for the paragraph sign at the end of condition "price 2"
Whenever you make the other conditions invisible, you also have to turn off the new conditions that only control the paragraph signs.
See the following screenshots:
Uwe

Height adjustment for Intel I-Macs

As a consulting ergonomist I am baffled by Apple decision to mount the new I-mac on a base that allows little height adjustment. I queried one of my All-apple-all-the-time clients about obtaining VESA mounts for these machines and heard back through their grapevine that the new machine would not accept a VESA mount. Is this true? Please advise. I already see extended heads and have complaints of sore shoulders.
Waiting to hear.

Apple, you CAN do better.
If you want to give Apple feedback, there is this page:
http://www.apple.com/feedback/
as well as:
http://www.apple.com/contact/feedback.html
Change Broken Links to a different kind of feedback if you want it.
You are posting this to a user to user forum, and while sometimes Apple does read these posts, they are more likely to look at feedback through the original two links.

Conditional Text in Table - Problems with row height adjustment

Hey there,
I’m german but I try to express my problem in english as good as I can. Not always easy with the different menu names. Hope you get what I want to say! :-)
As you can see in my attached screenshot, I placed text in a table.
Text height is set to: minimum 1,5 … so it adjusts to the amount of text.
This is what I want - it should adjust the height to the marked/aktivated conditional text.
It always adjusts the hight when I blind out the first line oder lines in between (e.g. line 2+3 of 4).
But if I want to blind out the last line(s), there is a ¶ at the end and a extra blank line with the #.
I know, the # stands for the following hidden Text, but why does it work with the red/green text.
There is also text hidden (green), but the mark # is right after the last word - not in a new line.
Has anyone a solution for this?
Thanks in advance!

That's ok so far. A paragraph sign at the end of a text forces a new line.
To change that do the following:
For every condition you need another condition just for the paragraph sign that comes immediately after the condition. Not after every paragraph of one condition, but at the end of every consecutive numbers of paragraphs of the same condition.
So in your third example you'll need two conditions more:
1. One for the paragraph sign at the end of condition "meaasurements"
2. One for the paragraph sign at the end of condition "price 2"
Whenever you make the other conditions invisible, you also have to turn off the new conditions that only control the paragraph signs.
See the following screenshots:
Uwe

JTable and adjusting Row height

Hi,
How to make a row height adjustable, like user can click on the row and drap to increase the height of the row,
Also if i have JTextArea as cell rendere how do i dynamically adjust the row height to display all the text
Ashish

That's a lot of questions..... but here are your answers:
1. Can we adjust variable row height for each row,Yes, use JTable's setRowHeight method to set the height of each row.
2. Also as we adjust the column widht, can we adjust the row height by dragging,You should be able to adjust the column width by clicking the mouse on the edge of the column header and drag. There is no automatic provision for changing the row height that way -- you'll have to add a mouse listener to the rowheader and write your own code to perform the resizing.
3.Suppose i have JTextArea as a cell renderer , how can i display all the text in a row with out having to use a scroll bar, You'll have to figure out how many rows (based on the sum of the individual row's height) the textarea occupies (taking into consideration the font that you used to render the textarea). I have my own way of doing things but if you search this forum, you'll find a lot of discussion on how to do it.
;o)
V.V.

CS2 automatically fit row height to content in table?

Hi guys, I'm using CS2 and I have a table with lots of pages. I need to be able to have the height automatically fit to the content of the tables. Unfortunately data is not consistent therefore some cells have 2 rows of content, others 8.
Automatically fit to content is not available.
I have tried adjusting row heights then 'table' > 'distribute rows evenly' but obviously this is no good as some are too cluttered, others too spacious.
Any suggestions appreciated.

Huh. Maybe I read the OP's posts correctly, I think, but I misread yours. I assumed that, since the thread-opener mentioned row height, that when the OP asked about getting rid of "distribute evenly" that row height was still under discussion. Looks to me like all you can do with cell width/column width is
1) Select a column and specify an exact width
2) Select a group of columns and specify the same exact width for all of 'em
3) Select all the columns and
a) Distribute columns evenly
b) Specify an exact width for all columns
Unfortunately, I have to use tables a great deal, so I feel like I'm up to speed on what we can and cannot do with ID tables.

Increasing the row height in crm 2011

Hi,
I am using crm 2011, I want increase the row height in a view, so that it can display the description in multiple rows.
any information will be helpful.

In views you can only specify column width and not row height.
For columns that have large data, taking the mouse over the column will display the text in the tooltip.
HTH
Sam
Dynamics CRM MVP |
Inogic | http://inogic.blogspot.com|
news at inogic dot com
If this post answers your question, please click "Mark As Answer" on the post and "Mark as Helpful"

Row height in HFM Form

Hi
This is a bsic question. Is it possible to change the row height of one particular row on the web form ?
I have a form with formrowheight as 20px.
There is a BLANK row with custom header 'Check' that needs to be of height '5px'
Is there a way to change this ?
I tried override but it didnt seem to work. May be I am doing somethign wrong.

Syntax
The Style option is interpreted by the browser, not by Financial Management, so it is limited only by what the browser supports. The Style option uses the standards supported by the W3C. See http://www.w3.org/tr/rec-css2. The Style keyword consists of one or more style properties, separated by semicolons. Each property consists of the property name, a colon, and the value. The value can be one or more words, separated by spaces.
For example: Style:color:red;text-align:right
Note: You can use the Style option keyword one time on a line and add multiple Property:Value pairs.
For example: C3=S#Actual.Y#@CUR(-1),Style:color:blue;background-color:red;font-weight:bold
The Style Example table lists some of the properties and potential values that can be used. For a full list, see the Property Index at http://www.w3.org/TR/REC-CSS2/propidx.html.

Row Height on HFM Form

Hi
This is a basic question. Is it possible to change the row height of one particular row on the web form ?
I have a form with form row height as 20px.
There is a BLANK row with custom header 'Check' that needs to be of height '5px'
Is there a way to change this ?
I tried override but it didnt seem to work. May be I am doing somethign wrong.

FormRowHeight Use this keyword to specify the height of all rows in the form. The default is 16px.
Syntax
FormRowHeight=Pixels px Replace Pixels with the number of pixels for the row height.
Caution!
You must include px after Pixels. If you omit px, rows and columns may not align correctly when the form is printed.
Example
FormRowHeight=16 px
Edited by: GCAPO on Apr 19, 2013 6:16 AM

Dynamically adjust table row height based on data in column

Hi all,
I'm using JDeveloper 11.1.1.5.0 and have a requirement for a table to adjust the height of its rows depending on the data in the columns. One of the columns in the table is a rich text description field and I have the 'rows' property set to 13. This field could have twenty lines of text/images or just one. The users would like the page to show all twenty lines of text without having to scroll but the table has the same height for all the rows (that I set to 13) and provides a scroll bar when the data exceeds this size. My users do not like to scroll, and want the height of each row to be determined by the data in it. I looked at a few options and also did a search online, but was unable to find anything to fulfill this requirement. Do you know of how I could change the height of each row in the table so that it fits the data that it holds?
I have an example of my table at: Table with Set Row Height
As you see, the picture has to be scrolled so that the whole picture is visible. The user requirement is to adjust the row height to show the full picture. Ideally the next two rows would shrink, but that would be a nice to have.
Thanks in advance for any pointers or help.

Hi Frank,
Thank you for replying to my question, I truly appreciate your help.
I tried to use the autoHeightRows to adjust the height of my rows but was unsuccessful. If I understand the autoHeightRows property correctly, this is used for setting the height of the whole table. If this is incorrect and it can be used for setting the height of individual rows in the table, please correct me. I have the 'Rows' property of the richTextEditor set to 13 and this is the height that I would like to make dynamic based on the data.
My users requirement is for the height to be big enough for the data in each row of the table (the table has a description column and the height of each row should be determined by the data contained in it). I updated my Screen Shot to show the desired layout and what is currently being generated though ADF (http://www.flickr.com/photos/87583386@N05/) .
I have three rows in the example (in actuality these are around 50) and the text in each row can vary. The users would like to see the full text/image in each row without having to scroll each row. Currently my table is within Panel Box, which is inside a PanelGroupLayout-Scroll which is in a PanelStretchLayout. I tried to put the table by itself with the autoHeightRow modifications you suggested but thsi did not help either. I am using JDeveloper 11.1.1.6.
Is this possible with an ADF Table? If it is, is the autoHeight property the only one that I am setting incorrectly? If not, is there another component I can use to get the desired functionality? My users are very strict about this requirement and will not accept the application without this.
Thanks,

Dynamic row heights for NSTableView

Hi everyone,
I just began writing OSX apps not too long ago. I'm having trouble with dynamically setting my row heights for an NSTableView. I've seen a really old solution where the subclass the view but I also found a solution posted by Corbin on Stack Overflow. However, I don't quite understand and am hoping someone has sample code?
For my usecase, I have a list of text of varying lengths and are displayed in a multi-line text field. The rows for the table cut off the text and so I'm trying to resize them to fit the text. When I check on the setRowSizeStyle to custom - it defaults to 71 and is fixed at 71. I hope someone can help me out. I think the solution posted by Corbin should solve my problem but I have no idea how to implement it.
Thanks

Etresoft, the function that you gave me for some reason constantly calculates the height as 39. Minus the fudge factor of 25 means I'm constantly getting 14 for my height for all rows and some of the text is cut off. I think it might be because I'm passing in the wrong size into my NSTextContainer.
Here's my code right now:
- (CGFloat)tableView:(NSTableView *)tableView heightOfRow:(NSInteger)row
    Message *message = [thread objectAtIndex:row];
    NSTableColumn *tableColoumn = [conversationView
                                   tableColumnWithIdentifier:@"tableColumn"];
    if (tableColoumn)
        NSCell *dataCell = [tableColoumn dataCell];
        [dataCell setWraps:YES];
        [dataCell setStringValue:message.message];
        CGFloat height = [self calculateIdealHeightForSize:[dataCell cellSize] content:message.message];
        NSLog(@"Message: %@ Height: %f", message.message, height);
        return height;
    NSLog(@"No size found. Returning default size for 100.");
    return 100;
- (CGFloat) calculateIdealHeightForSize: (NSSize) size content: (NSString *) content
    NSTextStorage * storage =
    [[NSTextStorage alloc] initWithAttributedString:[[NSAttributedString alloc] initWithString: content ]];
    NSTextContainer * container =
    [[NSTextContainer alloc] initWithContainerSize: size];
    NSLayoutManager * manager = [[NSLayoutManager alloc] init];
    [manager addTextContainer: container];
    [storage addLayoutManager: manager];
    [manager glyphRangeForTextContainer: container];
    NSRect idealRect = [manager usedRectForTextContainer: container];
    // Include a fudge factor.
    return idealRect.size.height + 25;

Can we adjust ROW height in ALV report as like of Excel ?

Dear all,
Can we adjust ROW height in ALV report as like of Excel sheet ?
Can we increase/decrease the row height in the output display ?
How ?

kps204020 wrote:
Thanks a lot for your response.
I've tried your proposal, but it has no affect. The report cells show all their content using as much lines as necessary for this.This is the default behaviour for HTML table data (tables and cells expand to fit their content).
So I still have rows with lots of lines and rows with only a few lines mixed in my IR dependant on the cell content. Because some rows filling nearly the whole screen, it is difficult to get an overview with regard to adjacent rows.
I'm using Application Express 4.1.1.00.23. with Theme 21. Scarlet and Firefox 17.0.1.Are all users using Firefox?
Actually I'm working on my first APEX Solution for usage in my company and the customers demanding a solution for this topic . So I'm very keen to find a solution.
I'm very much looking forward to your response.I've been involved with similar issues in the past. My first response is simple: Does this data have to be shown in the report? Can the offending column(s) be removed from the primary report? They will still be visible in the single row view, and the detail view if there is one.
The second option is to create a detail view for the report with a structure that is better suited to the data involved, and make this the default view. (For an example of this, see the treatment of the PRODUCT_DESCRIPTION column in the detail view of the Products report in the Sample Database Application: click on the View Detail button on the Products page.)
The third possibility is some kind of customization of the presentation of the data. This will involve using some combination of HTML/CSS/Dynamic Actions/Plug-ins/JavaScript that you may not be familiar with: do you have experience of these? To go down that route you need to describe in detail how you want to present the data, or what behaviour is required when the data is too long, and share an example of the report on apex.oracle.com that we can work with.

Problems with Automatic Adjust row height in FRs ver. 11.1.2.1.103

Hi
We have just upgraded to 11.1.2.1.103 from 9.3.3.
.103
We had a fairly complex report that worked in the previous environment, but not anymore.
We have a number of text lines with that pulls from other lines in the report that are hidden.
It is celltext that we are reporting on.
The lines are setup, so the row height should just adjust depending on the amount of text, but it does no longer work for consecutive lines with the adjust row hight atribute swithed on. I now have to insert blank text lines with a fixed height in between to get it to work.
It makes the report the report look messy, so has anyone had similar issues and know a work around or a possible patch.
KR
Per

Okay,
I tried that I when I tried to use: sqlplus -s I got the following results
SQL> sqlplus -s
SP2-0042: unknown command "sqlplus -s" - rest of line ignored.
I am also still getting the following in my output:
Any other suggestions?
SQL> Select
2 'Siebel CVP' as Source_Name,
3 'RCI' AS Brand,
4 'Phone' AS Channel,
5 'Inquiry' AS EBR_Type
6 FROM dual;
Siebel CVP RCI Phone Inquiry
SQL> set head on
SQL> Select
2 substr(con_home_ph_num,1,10) AS Chan_Addr,
3 'No EBR Date' As EBR_date,
4 substr(x_rccl_brand,1,3) AS Brand,
5 'Phone' AS Channel,
6 substr(con_person_uid,1,21) AS Src_Id,
7 substr(x_rccl_source,1,23) AS EBR_source,
8 'Inquiry' AS EBR_Type
9 FROM
10 siebel.eim_contact
11 WHERE
12 con_home_ph_num is not null and
13 con_home_ph_num > '201'
14 and length (con_home_ph_num) = '10'
15 and con_home_ph_num <> '0'
16 and con_home_ph_num <> '1111111111'
17 and con_home_ph_num <> '9999999999'
18 and con_home_ph_num <> '0000000000'
19 and con_home_ph_num NOT LIKE '+%'
20 and con_home_ph_num NOT LIKE '0%'
21 and con_home_ph_num NOT LIKE '123%'
22 and con_home_ph_num <> '2222222222'
23 and x_rccl_call_type is null
24 and x_rccl_brand = 'RCI'
25 and TO_DATE(TO_CHAR(x_rccl_entry_date, 'MM/DD/YYYY'), 'MM/DD/YYYY') >= TO_DATE(TO_CHAR(sysdate, 'MM/DD/YYYY'), 'MM/DD/YYYY')
26 and x_rccl_source IN ('CTI','CTI_GVS','CTI_HOTWEB','CTI_PRE_SHOPPING_CALL','DIR_PASTGUEST_RECONNECT')
27 ORDER BY
28 con_home_ph_num asc
29 /
CHAN_ADDR EBR_DATE BRA CHANN SRC_ID EBR_SOURCE
EBR_TYP
5167350937 No EBR Date RCI Phone Prospect - 1-3IIJ-218 CTI_PRE_SHOPPING_CALL
Inquiry
8054977010 No EBR Date RCI Phone Prospect - 4861358 CTI_PRE_SHOPPING_CALL
Inquiry
SQL> spool off

How to set the row height for a list control in flex 4.5 for mobile?

Hi,
I have a List in my Adobe Flash Builder 4.5 and flex 4.5 mobile application. I show the image and the label in my list. The list item height gets adjusted based on the image height. I don't want this auto row adjustment. Instead I would like to set the row height manually.
Is there any property to set the item height in a list?

setting rowHeight in the List layout works for me.
<s:List>
<s:layout>
<s:VerticalLayout rowHeight="48"/>
</s:layout>
</s:List>

How create dynamic URL for every row shown in the report?

Hi,
Iam new to this Application. I created one interactive report to find the number of bugs logged for every product and its sub component for past one year. The report will look like below structure in the application.
Product Subcomponent Total
P1 S1 10
P2 S2 4
P2 S21 15
Now i want to pick the value of Prouct and sub component for every row dynamiaclly and want to generate the URL with the conditions and make it as hyperlink for the Total Column.
Iam able to make hyperlink for the Total column using the edit options for the total attribute, but it is opening the same page for all the rows in the total column. I want to generate dynamic URL by picking the value prodcut and sub componenet dynamically from the report for every row and want to make it as hayperlink for every row individually.
Please tell me how to do this?
Please revert back if you are not clear. Appericiate for your quick help.

Hello <unknown user>,
So you already set the Column Link attributes for your Total column. Should all links go to the same page, but with different parameters (ProductID, SubcompID)? Or to another page? And how can you determine that page?
Assuming you'll go to a sort of detail page or form:
Target = [Page in this app]
Page = <your target page no>
Item1 = <ProductID field in target page>
Value = #PRODUCTID#
Item2 = <SubcompID field in target page>
Value = #SUNCOMPID#
(you can use the ' flashlight' for getting the correct values)
Greetings,
Roel
http://roelhartman.blogspot.com/
You can reward this reply by marking it as either Helpful or Correct ;-)

TableLayoutPanel row height adjustment for dynamic row

Similar Messages

Maybe you are looking for