Tables and Views are not displaying any objects.

I have tried both Filtered and non-filtered for tables and view but it won't list any tables or view.
I can run a query and it shows all the tables/views in the query window.
SELECT table_name FROM dba_tables
select view_name from all_views

Who owns the objects?
The browser only shows objects owned by the current logged in user in the main section. You need to go into the Other Users node to find objects owner by other users.

Similar Messages

Image Capture, Dropbox, and iPhoto are not displaying any of the photos I've taken on my iPod Touch.

I'm using the most recent iPod Touch with iOS6. I've been able to share photos and videos via email without any problem, but I'd rather find a more efficient way of doing it. Everything I've read online has instructed me to use Image Capture or iPhoto. However, when I open either of these applications, they are able to recognize my iPod, but behave as though there are no photos or videos on the device when there are, in fact, 20 photos/videos in the Camera Roll. I turned off Photo Stream, since I'm not running Lion on my computer (it's incompatible with my version of ProTools).
Help!

If you backed up the iPod before restoring it then restore from that backup. See the restore topic of:
iOS: How to back up
Also, if yoo have that backup you can extract the photos by:
Recover iPhone, iPad or iPod photos from backups with Picturescue
If you used PhotoStream then try getting them from your PhotoStream. See that topic of:
iOS: Importing personal photos and videos from iOS devices to your computer

UKMCRED_SGM0C: Only tables and views are permitted for extraction???

All,
My BI transport got failed (from Dev to QA) with the reason
" UKMCRED_SGM0C: Only tables and views are permitted for extraction" . Can you please help me in this.
Thanks,
Andy

hi Roger,
Could you please provide more details of the transport ... like what was being transported ... from what I see I feel you attempted to transport a generic datasource.. not sure.
Best regards,
Kazmi

Nodes and links are not displaying in IE10 browser - mapviewer ps6

Hi,
Node and link are not visible on the IE10 browser where as in IE9 they are displaying properly.
In IE10 browser ,
when we set compatibility settings - Display All websites in compatibility view --> node are displaying properly.
when we deselect this node are not displaying properly
Is there any existing bug on mapviewer?
Thanks in Advance
Aruna

DRK Montreal,
try opening Terminal, and running the following command in the Terminal window:
nslookup www.pinatize.me
If you still have access to some of those other Mac computers, try running the same command on them also for comparison.
Please include in your reply the full output from that command.

JFileChooser file filter and view does not display Drive letters

This code displays only files that end in abc.xml, and directories. For example, "helloabc.xml" and directory "world" will display as hello and world, respectively.
However, I am surprised to find that the drive letters are not displayed at all. eg. C:
any insights?
thanks,
Anil
import java.io.File;
import javax.swing.JFileChooser;
import javax.swing.filechooser.FileFilter;
import javax.swing.filechooser.FileView;
public class NoDrive {
     protected static final String ABC_FILE_EXTN = "abc.xml";
     public String selectFile(String function){
          File file = null;
          JFileChooser fc = new JFileChooser();
          fc.setFileFilter(new FileFilter() {
               public boolean accept(File f) {
                    if (!f.isFile() || f.getName().endsWith(ABC_FILE_EXTN))
                         return true;
                    return false;
               public String getDescription() {
                    return "ABC files";
          fc.setFileView(new FileView() {
               public String getName(File f) {
                    String name = f.getName();
                    if (f.isFile() && name.endsWith(ABC_FILE_EXTN))
                         return name.substring(0, name.indexOf(ABC_FILE_EXTN));
                    return name;
          int returnVal = fc.showDialog(null, function);
          if (returnVal == JFileChooser.APPROVE_OPTION) {
               file = fc.getSelectedFile();
               return file.getName();
          return null;
     public static void main(String[] args) {
          (new NoDrive()).selectFile("Open ABC");
}

OK. Here's the correct code:
    fc.setFileView(new FileView() {
      public String getName(File f) {
        String name = f.getName();
        if (f.isFile() && name.endsWith(ABC_FILE_EXTN)){
          return name.substring(0, name.indexOf(ABC_FILE_EXTN));
        else{
          return super.getName(f);
    });

Pictures and texts are not displayed properly

Hello Apple users,
I've the 15 inch Macbook Pro with retina display, running Mountain Lion. I have noticed that when I chat with my friends in Facebook, the texts in the chat window are not displayed properly. This also happens when flipping through photos that were uploaded in Facebook. Also, pictures are not displayed properly in other websites. For example, today I was reading the news in the Guardian when I noticed that the top bar and a picture weren't displayed properly. The top bar should have showed News, Sports, Comment, Culture, Pensions, etc. all in the same line. Also look at the photo titiled "Should building socities do buy-to-let?" I took a screenshot from the guardian and you can see the photo here: https://docs.google.com/file/d/0ByQ7VP0wjFM-U0ZIOXlwMm13Vnc/edit?usp=sharing
Do you guys have any suggestions how can I fix these issues?
Thanks for reading and your help

From the Safari menu bar, select
Safari ▹ Preferences ▹ Extensions
If any extensions are installed, disable them and test.

Street and Country are not displaying on the Form

Hi all,
Does anyone know why the STREET and COUNTRY is not displayed on form?
I have debugged into SAPscript, the value for REGUH-STRAS and LV_REGIO is there, but somehow it just cannot display on the form.
/ &REGUH-NAME1&</></>
/ &REGUH-STRAS&</></></></>
/ &REGUH-ORT01&</></></></></></>
/ &REGUH-PSTLZ&</></></></></></></></>
/ &LV_REGIO&</></></></></></></></></></>
Please advice and thanks in advance.

Hello,
Use Condence symbol 'C' in the respective fields.
&REGUH-STRAS(C)& / &REGUH-ORT01& / &REGUH-PSTLZ& / &LV_REGIO(C)&
Regards,

Ini_trans and max_trans are not displaying on tables

Hi Experts,
When i am firing below query, It's not displaying ini_trans and max_trans. I know there are certain default values are set by oracle for these.
SQL> select table_name,ini_trans,max_trans from dba_TABLES Where table_name='MESSAGE';
TABLE_NAME INI_TRANS MAX_TRANS
MESSAGE
Complete Table Structure is as follows
========================
CREATE TABLE "ORCL"."MESSAGE"
( "ID" NUMBER(20,0),
"NAME" VARCHAR2(128),
"CLASSNAME" VARCHAR2(256),
"DESCRIPTION" VARCHAR2(1000),
"OWNER" NUMBER(10,0),
"TYPE" VARCHAR2(64),
"STATE" VARCHAR2(256),
"STATUS" VARCHAR2(256),
"CREATEDBY" VARCHAR2(64),
"DTTMCREATED" TIMESTAMP (3),
"LASTUPDATEDBY" VARCHAR2(64),
"DTTMLASTUPDATED" TIMESTAMP (3),
"INUSEBY" VARCHAR2(64),
"INUSEID" NUMBER(20,0),
"INUSESINCE" TIMESTAMP (3),
"VERSION" NUMBER(20,0),
"REVISION" NUMBER(20,0),
"ARCHIVEDAY" VARCHAR2(32),
"APPLREF" VARCHAR2(64),
"APPLSTATUS" VARCHAR2(64),
"PRIORITY" NUMBER(10,0),
"FORM" NUMBER(20,0),
"FORMNAME" VARCHAR2(128),
"STP" NUMBER(1,0),
"SERVICE" NUMBER(20,0),
"SERVICENAME" VARCHAR2(128),
"STAGE" VARCHAR2(64),
"STAGEINDEX" NUMBER(10,0),
"STAGEREVERSE" NUMBER(1,0),
"STAGECOMPLETE" VARCHAR2(256),
"STAGEREQUIRED" VARCHAR2(256),
"STAGENEWTRANSACTION" VARCHAR2(256),
"STAGESTP" VARCHAR2(256),
"PRIORITYGROUP" VARCHAR2(32),
"INSTANCEID" NUMBER(10,0),
"DTTM" TIMESTAMP (3),
CONSTRAINT "MESSAGE_PK" PRIMARY KEY ("ID", "ARCHIVEDAY")
USING INDEX PCTFREE 10 INITRANS 2 MAXTRANS 255
STORAGE(
BUFFER_POOL DEFAULT) LOCAL
(PARTITION "PART_FUTURE"
PCTFREE 10 INITRANS 2 MAXTRANS 255
STORAGE(INITIAL 131072 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "STP_DATA" ,
PARTITION "PART_DEFAULT"
PCTFREE 10 INITRANS 2 MAXTRANS 255
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "STP_DATA" ) ENABLE
) PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255
STORAGE(
BUFFER_POOL DEFAULT)
TABLESPACE "STP_DATA"
PARTITION BY LIST ("ARCHIVEDAY")
(PARTITION "PART_FUTURE" VALUES ('0')
PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255
STORAGE(INITIAL 2097152 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "STP_DATA" NOCOMPRESS ,
PARTITION "PART_DEFAULT" VALUES ('1', null)
PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255
STORAGE(INITIAL 458752 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "STP_DATA" NOCOMPRESS ) ENABLE ROW MOVEMENT
Could you please let me know why Oracle not displaying its default values? Oracle version is 11.1.0.7.0

This is a partitioned table. Check DBA_TAB_PARTITIONS. INI_TRANS and MAX_TRANS are defined at partition/subpartition levele as and where applicable.
Thanks,
Joy

Reg: 0COUNTRY and 0REGION are not displaying in the report

Dear SDNERS,
I am facing a problem in CRM Report " 0CRM_C04_Q003" I am not able to get the 0COUNTRY & 0REGION data in the reports it is showing # Not Assigned.
When I check the 0REGION & 0COUNTRY it is having data in it in the info objects.
I come to know that both the objects are navigational attributes of "0CRM_PROSPE" info object in the report and this info object does not have any data in it as it is having a referece char of 0BPARTNER.
0BPARTNER is not showing the data for 0COUNTRY AND 0REGION. pleaes advice how to get this in CRM report.
Points will be assigned for a quick response.
Regards,
Prasad.

Hi,
0COUNTRY and 0REGION as you said are Nav Att of 0CRM_PROSPE Master data.
If Master data object itself is not having data then it would not be possible for you to get data for these objects.
You can include these two objects in your InfoProvider and add in your Query as normal InfoObjects instead of Nav att.
Note: The two Infoobjects should be mapped with the appropriate source fields in the transformation and data load should be successful.
Hope this would resolve your issue.
Regards,
Geeta

Some fine line Graphics and shading are not displaying at all with OS X Yosemite

Our team is working on a new website layout. It is being developed in photoshop and then saved as a jpeg for review. All of the fine gray lines, boarders and some shading does not display at all. If I save a screen shot and mouse over to choose the screen shot all of the missing lines and shading appear correctly when holding down command-shift-4 to choose the screen shot. After the screen shot is chosen the saves screen shot still does not display the correct lines and shading. Anyone know what is going on? The jpegs are displaying correctly on my iphone and all other Mac Desktop operating systems.

So I returned the previous scanner and purchased the Epson Perfection V600 Photo. I'm still having the same problems and I downloaded the latest driver for it. I also downloaded the driver for my previous Canon Scanner before I returned it. It wasn't working the way I wanted it to work.
It wasn't the scanner after all but I do like the epson better. When I get it to scan, it's scans faster and has more resolution options.
Anyway
Basically I want to be able to scan in Photoshop CC but it's not working the way it used to in previous machines/OSs/photoshops.
I used to be able to go FILE>IMPORT>SCANNER NAME and then continually scan until I was finished. That is not the case and I have noticed it's a problem throughout when doing some research to fix it. I can scan continually if I got to my system preferences, select the "PRINTERS and SCANNERS" and then click "Open scanner".
In photoshop CC I can only get one scan and then I have to close photoshop if I want to do another scan. It's annoying knowing that I was able to in previous machines. Any solutions or plug-ins that I'm missing?
Thanks so much for everyone helping out!
Michael

Results view does not display any data

Hi
Every time I execute a query in the sql worksheet, I do not see anything in the results view. I only see the ouput in the output script folder. The output script view display is just like the usual sqlplus screen results. I want to look at the results in a table format that is suppose to be displayed in the results view.I used F5 and F9 to execute the query.
Can anyone tell me why this is so?
Example below is what I see in the output script view, when I run the query below.
select file_name,tablespace_name from dba_data_files;
FILE_NAME
D:\ORACLE\ORADATA\ORA92\SYSTEM01.DBF
D:\ORACLE\ORADATA\ORA92\UNDOTBS01.DBF
D:\ORACLE\ORADATA\ORA92\CWMLITE01.DBF
D:\ORACLE\ORADATA\ORA92\DRSYS01.DBF
D:\ORACLE\ORADATA\ORA92\EXAMPLE01.DBF
D:\ORACLE\ORADATA\ORA92\INDX01.DBF
D:\ORACLE\ORADATA\ORA92\ODM01.DBF
D:\ORACLE\ORADATA\ORA92\TOOLS01.DBF
D:\ORACLE\ORADATA\ORA92\USERS01.DBF
D:\ORACLE\ORADATA\ORA92\XDB01.DBF
D:\ORACLE\ORADATA\ORA92\TEST01.DBF
11 rows selected.
I want to be able to see the results in the results view in a table format. Why is this not happening?
Thanks.

It works for me, when I use F9. Ensure you select the statement (unless it's the only statement) then press F9, or click the triangle button.
I guess it makes sense for F5, or execute script, to not show a table as there may be many selects, and other statements, in a script and there is no specific return value from a script.
Message was edited by:
TonyW

HT4221 My ipad photos and video are not in any order.

I have a series of photos and videos that I am using Sync Photos, and it loads them in completely absurd orders, different each time I've attempted. It does not follow the naming convention nor the dates in the order it has.
My first sync, the photos were in order, then the video but I wanted both intermixed, following the name of the file and not the .jpg or .mov.
I am syncing from a windows pc using Windows Vista.
I tried using the app Photo Manager Pro, and it has the audacity to rename the files too! So the order there is whacked.
Is there any common sense solution to this, so you know, I can use a modern apple device to view photos and video, in order?

I have looked a little bit more, and it seems as though the video is lagging behind, not the other way around. Video seems choppy, but the audio is playing perfectly. Music Videos are suffering from the same problem as well. Also, when I sync to my iPod Touch 16GB, audio & video match up perfectly.
I still have no idea how to fix this. Please help.

Import successfully but all tables and data are not completely importing

We have A UGS product called Teamcenter running on oracle 9i database. It is developement so it is very small 200M The problem is I am doing daily export but when imported back into DB it does not recovering all the data that I had exported. I am wondering any special about UGG product that requires special method for backup??? Anyone familiar with this , I would appreciate if you can provide me some leads .Thank in advance.
Jonathan nguyen

Don't know about UGS but it will be helpfull if you tell us that how are you taking the export?? Means full database or schema level and also how are you importing??
Can you post the export and import command which you are using?
Daljit Singh

Danish character and Symbol are not displaying in crystal report 2008

I am developing a crystal report. The report displays data from database. The data is entered into database from a asp.net web form where a JavaScript Editor is used. Mainly data is saved in Danish character and also there are some emotion symbol. The web page is showing these data reading from database perfectly. But the Crystal Report is missing some Danish character as well as emotion symbol in some cases. The screen print both for web page and crystal report is shown bellow. The database field DataType is “CLOB” and using Crystal Report 2008.
Can anyone help me to get rid of this situation.
Thanks to you all.

Please have a look at the resolution in this thread:
CR 2008 - Oracle 11g - CLOB fields are blank when using command
-Abhilash

Wi-fi and bluetooth are not working any more on my iPhone 4s after I updated it to 7.0.4

Dear all,
Since Friday morning the Wi-Fi and Bluetooth of my iPhone 4S have not been wirking any more. They appear as "unactive". I restored the system, updated it to 7.0.4., but nothing changed. Can anyone please help me?
Thankful in advance,
Kind regards,
Fraya Frehse

Last night I wiped the phone and did a complete restore. Lo and behold the wifi was working again after the restore finished. GREAT. 30 minutes later went to look at the phone and no wifi again, great!
So if my wifi chip coincidentally fried itself during the update, I supposed it coincidentally unfried itself during the restore, only to fry itself again later. Clever chips these.

Tables and Views are not displaying any objects.

Similar Messages

Maybe you are looking for