Tables BUT000 and SMOKNA1 not in synch

Dear all,
We are checking our customer database cause our users have complaint they are missing customers on their mobile clients.
When I check BUT000 and SMOKNA1 I have noticed that some customers only exist in BUT000 and not in SMOKNA1, although the biggest part of my customers exist in both tables.
The customers are coming from the R/3 system, but I don't see any difference in data between customers who are in SMOKNA1 and customers who are not.
Can someone help me and tell me what is going wrong and how I can fix this problem so both tables are back in synch.
Kind regards
An

Hi An,
check out transaction Sdima, it was developed specifically for the purpose of comparing database entries (between CRM & CDB and between CRM & R/3).
There should be a SAPtutor available somewhere on how to use the transaction.
grtz,
Michael.

Similar Messages

Audio and Video not in synch?

Hello, I recently bought my Vado HD, on first using it the video and audio are not in synch on the playback. The video runs slower than the video. I am wary to upgrade the firmware because it seems a lot of people on this forum have gotten more problems since they upgraded...
Any ideas why my audio/video synch is off and how I can fix it would be greatly appreciated.
Thanks in advance,
Jack.

try this link for prior discussion:
http://forums.creative.com/creativelabs/board/message?board.id=vado&message.id=63&query.id=42920 #M63

Photos and thumbnails not in synch

I have deleted photos, but their thumbnail still shows up. Also, other deleted photos show up but there is no thumbnail under "Event" for the event.
It seems that deleted photos are not in synch with their thumbnails. is there a way to resynchronize the index file?

download iPhoto Library Manager - http://www.fatcatsoftware.com/iplm/ - and use its rebuild command - this creates a totally new library so if you are not happy with it you can just go back to the current one
LN

Video and audio not in synch after 11.6 update

Ive updated to the 11.6 version flash player several times and this out of synch issue has happened every time. In the past I just went back to older version. Now the sites I use (youtube, letmewatchthis.com...ext) wont let me use the older version at all. So once again I updated, and of course I have the same problem. The audio appears normal, but the video is dragging, going into a slowmotion kinda thing. Im using Mozilla Firefox, my cpu is a desktop windows XP service pack 2 Pentium 4 1500 MHz 1.50 GHz 512 MB of RAM (yes I know its a pretty pathetic desktop by todays standard, but its all I got for the moment) Ive went down the list on the troubleshooting page and did all that I could. Deleting browsing history, removing flash cache, disable hardware acceleration. Im all out of ideas. If someone could help that would be splendid.

Can you try out latest 10.3 build to see if that works for you? It should work on most sites.
Where can I find direct downloads of Flash Player 10.3 for Windows or Macintosh?

Audio and video not in synch after upgrade

I have 12.1.1.4. I'm using this new version for the first time tonight, to watch some Walking Dead episodes, and the audio and video drift out of synch. I can bring them back into synch by pausing then replaying, but it doesn't last. I watched some older videos that I know to be good and had the same issue, so it's not a problem with the episodes.
What I've tried:
Making sure that the Quicktime audio settings match the ones on my sound card.
Uninstalling and reinstalling iTunes.

I also have this problem, and some videos will no longer play in iTunes.
I get a message that this video is not compatible with this version of iTunes. I have to open the video in Quicktime to watch it.
Unacceptable! This hardware and software is too expensive to have these performance issues.
2011 Mac Mini, 8GB RAM, Duo core, iTunes library on NAS on wired network. Mountain Lion 10.8.2. iTunes 10.7 64 bit.

Org Structre in SRM and ECC not in synch

Hi Friends
System :SRM 7.0 Extended Classic scenario.
Scenario: We never copied our Dev Client fro Production. Recently our Dev ECC system has been copied from Production
But ,because of memory constraints we cannot do the same to SRM system.
Also our Org is replicated from ECC to SRM.
Objective: 1 Need to synch up the Org of ECC (Dev) to SRM(Dev)
Query 1: How do we overwrite the entire org setup of SRM .
Query2 : Can we make use of concept of Plan version here so that we end up doing wrong ,so that we could switch back to
the earlier version)
(Any inputs on how can we make this possible)
Query 3: Is it possible to transport only the Org structure from either Production (SRM) or Develepoment (ECC).
While doing all this we have a major issue
Issue1: We could figure out that the number ranges setup in our Dev org structure of SRM are totally differnt from ECC Dev.
Ex: Postion number are 65XXXXXX in ECC where as 60XXXXXXX in SRM.
So when we perform PFAL ,it fails .
Any kind of inputs for us to brainstorm on this.
Regards
Sarath

Hi Sarath,
If we are using active version then change the number ranges in OONR against 01$$
Check the IDOC settings for message type HRMD_ABA. it must be transafer IDOC immediately.
Get the all active organization unit (O) from HRP1001 table in SAP and run PFAL in update mode for object (O) and let me know the result. It will replicate all orgnaization unit and position which fas assigned to above
Regards
Dayal

Blackberry Link - not recognizing device and does not allow synching calendar and contacts

I cannot get Blackberry Link to work properly on my laptop running Windows 8.1 Pro. It takes a very long time to open and it does not allow me to sign in saying there is no internet connection and I cannot get around resolving this issue. That is problem 1. Problem 2, Blackberry Link sometimes recognizes the device and sometimes it does not. Problem 3, when I do get Link to recognize the device, (it can backup), synching the calender and contacts on the device to Outlook does not work. I try to do a one way synch from the device to outlook and it processes but Outlook is not updated (outlook has no contacts or calendar events as I want to pull them off my device).
Any ideas? Thanks.

Hello RankinWilbur44
Welcome to http://supportforums.blackberry.com/
Visit this Article ID: KB34374
Check this information
I hope it's a good help to your problem.
Via: sdgardne
http://supportforums.blackberry.com/t5/BlackBerry-10-OS-Device-Software/How-To-OTA-Sync-BB10-and-non...
BBM Channels PIN: C0007093A
Do not forget to give LIKE Those people who help you and advise you about your doubts. if the review has been SOLVED** # 4LL #ÉliteRoad Make a backup of your BlackBerry
BlackBerry Protect and BlackBerry Link constantly. #ichooseBlackBerry10 Gutijose14 Forums Veteran I

IPhone and iPad not wirelessly synching

I just downloaded the new I tunes and was having trouble getting into the iTunes store. I then noticed that neither my iphone4s or iPad 2 were showing up in the right side list. I checked to see when they were last synced and my iPhone was last done in march and my iPad in dec. now I charge my iPhone every other day and my iPad every few days so they should synch. Have it set up in iTunes correctly. Will I need to do the synch manually ? Does this have something to do with not being able to get into I tunes store on desktop? It just hangs

Andrew Bernstein1 wrote:
I just downloaded the new I tunes and was having trouble getting into the iTunes store. I then noticed that neither my iphone4s or iPad 2 were showing up in the right side list.
The right side list? Where is this area that you are talking about? My iDevices appear on the left side of the iTunes window when iTunes is running. I sync with WiFi.
I charge my iPhone every other day and my iPad every few days so they should synch. Have it set up in iTunes correctly.
What does charging either device have to do with syncing?
I need to do the synch manually ? Does this have something to do with not being able to get into I tunes store on desktop? It just hangs
If iTunes just hangs, I think it can be safely assumed that you might not be able to sync.
Frankly I am just a bit confused by your explanation on what is going on with your devices and iTunes.

Table VBRP and VBAP could not actived

My system is SAP ERP IDES ECC 6.0 SR2. After importing the support package SAP_APPL from 006 to the newest 016, when I try to user VA03 , the system raise a dump, after check the error information, I found it caused by Table VBAP and VBRP not actived correctly.
Check log:
Check table VBRP (WOODY/09.09.06/22:56)
Enhancement category 3 possible, but include or subty. not yet classified
Field name J_1BTAXLW4 can be provided in this system. Please do not use.
Field name J_1BTAXLW5 can be provided in this system. Please do not use.
VBRP: Structure change at field level (DB is adjusted)
Check on table VBRP resulted in errors
Check table VBAP (WOODY/09.09.06/22:57)
Append structure ZZDEAVBAP appended to table VBAP
Enhancement category 3 possible, but include or subty. not yet classified
Field name J_1BTAXLW4 can be provided in this system. Please do not use.
Field name J_1BTAXLW5 can be provided in this system. Please do not use.
VBAP: Structure change at field level (DB is adjusted)
Check on table VBAP resulted in errors
Activation log:
VBAP:
=========================================================================
Activation of worklist (WOODY / 2009.09.06 / 23:05:56 /)
=========================================================================
Technical log for mass activation
See log WOODY20090906230546:ACT
TABL VBAP was not activated
Check table VBAP (WOODY/09.09.06/23:05)
Append structure ZZDEAVBAP appended to table VBAP
Enhancement category 3 possible, but include or subty. not yet classified
Field name J_1BTAXLW4 can be provided in this system. Please do not use.
Field name J_1BTAXLW5 can be provided in this system. Please do not use.
VBAP: Structure change at field level (DB is adjusted)
Check on table VBAP resulted in errors
=========================================================================
End of activation of worklist
=========================================================================
Can somebody help me to resolve this problem? Many thanks!

VBRP Activation log:
=========================================================================
Activation of worklist (WOODY / 2009.09.06 / 23:07:40 /)
=========================================================================
Technical log for mass activation
See log WOODY20090906230740:ACT
TABL VBRP was not activated
Check table VBRP (WOODY/09.09.06/23:07)
Enhancement category 3 possible, but include or subty. not yet classified
Field name J_1BTAXLW4 can be provided in this system. Please do not use.
Field name J_1BTAXLW5 can be provided in this system. Please do not use.
VBRP: Structure change at field level (DB is adjusted)
Check on table VBRP resulted in errors
=========================================================================
End of activation of worklist
=========================================================================

Update the stastics of tables BKPF and GLFUNCA

Hello All,
update the stastics of tables BKPF and GLFUNCA not updataing
I have execute via Brtools
7 - Database statistics >> 1 = Update database statistics >> 9 ~ Tables for update (table) ......... [BKPF]
same for table GLFUNCA
7 - Database statistics >> 1 = Update database statistics >> 9 ~ Tables for update (table) ......... [GLFUNCA]
But in .sta file it is not collected
<DB20>
Table                 GLFUNCA
     Statistics are current (|Changes| < 50 %)
New Method           E
New Sample Size      P1
Old Method           E                       Date                 17.08.2008
Old Sample Size      P1                      Time                 19:52:15
It is one year old , so please help me how to update this table
Is this table causing performance problem for job RSUVM007
Regards
Mohsin M

Before all,
Why do you wnat to calculate statistics on those tables?
Do you have performance problems and you have identified that they are caused by "bad" statistics?
or simply you "must" collect them because they are "OLD"?
If it is the latter, remember that statistics MUST be representative not current. Please read the SAP Note 825653 "Oracle: Common misconceptions" point 7
Regarding the options of BRtools, it works as designed.
BRCONNECT will check if the table needs statistics:
- if it has changed more than 50% since last time (in your case 17.08.2008) and, if so it will do, otherwise it will not do it. See the output of DB20 that you pasted:
> Statistics are current (|Changes| < 50 %)
IF you need new statistics (and I mean, need, not like) then you have to force them. On BRTOOLS you go to the next screen and choose the option:
> 7 ~ Force options (force) ............... []
In your version/patch could be located in a different place
and here input collect
I strongly recommend you to read the BR*tools documentation as ALL this information is there.
In case you do not know where to find it, it is quite easy:
SAP on Oracle => Oracle DBA Overview => SAP Database Guide: Oracle

I am new to iMovies. When I make a video using the mic and camera in my Macbook Pro, the audio and video are not in synch. Very annoying. How can I fix this?

I am new to iMovies. When I make a video using the mic and camera in my Macbook Pro, the audio and video are not in synch. Very annoying. How can I fix this?

DVD drives read the bottom of the disk, not the top. Smooth out the paper & try again.

Why table getWidth and setWidth is not working when resize column the table

hi all,
i want to know why the setWidth is not working in the following code,
try to uncomment the code in columnMarginChanged method and run it wont resize the table.
i cont set width(using setWidth) of the other table column using getWidth of the main table column.
and i want to resize the right side columns only (you can check when you resize the any column the left and right side columns also resizing)
any suggestions could be helpful.
import java.awt.BorderLayout;
import java.awt.Dimension;
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
import javax.swing.Box;
import javax.swing.BoxLayout;
import javax.swing.JButton;
import javax.swing.JFrame;
import javax.swing.JPanel;
import javax.swing.JTable;
import javax.swing.SwingUtilities;
import javax.swing.event.ChangeEvent;
import javax.swing.event.ListSelectionEvent;
import javax.swing.event.TableColumnModelEvent;
import javax.swing.event.TableColumnModelListener;
import javax.swing.table.TableColumnModel;
public class SynTableResize extends JFrame implements TableColumnModelListener, ActionListener
    JTable table1       = new JTable(5, 5);
    JTable table2       = new JTable(5, 5);
    JTable table3       = new JTable(5, 5);
    JButton btn          = new JButton("refresh");
    JPanel pnlcontainer = new JPanel();
    public SynTableResize()
        setLayout(new BorderLayout());
        pnlcontainer.setLayout(new BoxLayout(pnlcontainer, BoxLayout.Y_AXIS));
        pnlcontainer.add(table1.getTableHeader());
        pnlcontainer.add(Box.createVerticalStrut(5));
        pnlcontainer.add(table2);
        pnlcontainer.add(Box.createVerticalStrut(5));
        pnlcontainer.add(table3);
        table2.setTableHeader(null);
        table3.setTableHeader(null);
        table1.getColumnModel().addColumnModelListener(this);
        table3.setColumnModel(table1.getColumnModel());
        table2.setColumnModel(table1.getColumnModel());
        table2.getColumnModel().addColumnModelListener(table1);
        table3.getColumnModel().addColumnModelListener(table1);
        btn.addActionListener(this);
        getContentPane().add(pnlcontainer, BorderLayout.CENTER);
        getContentPane().add(btn, BorderLayout.SOUTH);
        setSize(new Dimension(400, 400));
        setVisible(true);
        setDefaultCloseOperation(EXIT_ON_CLOSE);
    public static void main(String[] args)
        new SynTableResize();
    public void columnAdded(TableColumnModelEvent e)
    public void columnMarginChanged(ChangeEvent e)
        TableColumnModel tcm = table1.getColumnModel();
        int columns = tcm.getColumnCount();
        for (int i = 0; i < columns; i++)
            table2.getColumnModel().getColumn(i).setPreferredWidth(tcm.getColumn(i).getWidth());
            table3.getColumnModel().getColumn(i).setPreferredWidth(tcm.getColumn(i).getWidth());
            // the following commented code wont work.
//            table2.getColumnModel().getColumn(i).setPreferredWidth(tcm.getColumn(i).getPreferredWidth());
//            table3.getColumnModel().getColumn(i).setPreferredWidth(tcm.getColumn(i).getPreferredWidth());
//            table2.getColumnModel().getColumn(i).setWidth(tcm.getColumn(i).getWidth());
//            table3.getColumnModel().getColumn(i).setWidth(tcm.getColumn(i).getWidth());
        SwingUtilities.invokeLater(new Runnable()
            public void run()
                table2.revalidate();
                table3.revalidate();
    public void columnMoved(TableColumnModelEvent e)
    public void columnRemoved(TableColumnModelEvent e)
    public void columnSelectionChanged(ListSelectionEvent e)
    public void actionPerformed(ActionEvent e)
        JTable table = new JTable(5, 5);
        table.setColumnModel(table1.getColumnModel());
        table.getColumnModel().addColumnModelListener(table1);
        pnlcontainer.add(Box.createVerticalStrut(5));
        pnlcontainer.add(table);
        pnlcontainer.validate();
        pnlcontainer.repaint();
}thanks
dayananda b v

hi,
thanks for your replay,
yes i know that, you can check the following code it works fine.
actually what i want is, when i resize table column it shold not automaticaly reszie when table resized and i dont want horizontal scroll bar, meaning that all table columns should resize with in the table size(say width 300)
if i make table autoresize off than horizontal scroll bar will appear and the other columns moved and i want scroll to view other columns.
please suggest me some way doing it, i tried with doLayout() no help,
doLayout() method only can be used when table resizes. first off all i want to restrict table resizing with in the limited size
import java.awt.BorderLayout;
import java.awt.Dimension;
import javax.swing.Box;
import javax.swing.BoxLayout;
import javax.swing.JFrame;
import javax.swing.JPanel;
import javax.swing.JScrollPane;
import javax.swing.JTable;
import javax.swing.event.ChangeEvent;
import javax.swing.table.TableColumnModel;
public class TempSycnTable extends JFrame
    JTable table1       = new JTable(5, 5);
    MyTable table2       = new MyTable(5, 5);
    MyTable table3       = new MyTable(5, 5);
    JPanel pnlcontainer = new JPanel();
    public TempSycnTable()
        JScrollPane src2 = new JScrollPane(table2);
        JScrollPane src3 = new JScrollPane(table3);
//        table1.setAutoResizeMode(JTable.AUTO_RESIZE_OFF);
//        table2.setAutoResizeMode(JTable.AUTO_RESIZE_OFF);
//        table3.setAutoResizeMode(JTable.AUTO_RESIZE_OFF);
//        src2.setHorizontalScrollBarPolicy(JScrollPane.HORIZONTAL_SCROLLBAR_NEVER);
//        src3.setHorizontalScrollBarPolicy(JScrollPane.HORIZONTAL_SCROLLBAR_NEVER);
        table2.setTableHeader(null);
        table3.setTableHeader(null);
        table3.setColumnModel(table1.getColumnModel());
        table2.setColumnModel(table1.getColumnModel());
        table2.getColumnModel().addColumnModelListener(table1);
        table3.getColumnModel().addColumnModelListener(table1);
        table2.setTableHeader(null);
        table3.setTableHeader(null);
        setLayout(new BorderLayout());
        pnlcontainer.setLayout(new BoxLayout(pnlcontainer, BoxLayout.Y_AXIS));
        pnlcontainer.add(table1.getTableHeader());
        pnlcontainer.add(Box.createVerticalStrut(5));
        pnlcontainer.add(src2);
        pnlcontainer.add(Box.createVerticalStrut(5));
        pnlcontainer.add(src3);
        getContentPane().add(pnlcontainer, BorderLayout.CENTER);
        setSize(new Dimension(300, 300));
        setVisible(true);
        setDefaultCloseOperation(EXIT_ON_CLOSE);
    public static void main(String[] args)
        new TempSycnTable();
    class MyTable extends JTable
        public MyTable()
            super();
        public MyTable(int numRows, int numColumns)
            super(numRows, numColumns);
        public void columnMarginChanged(ChangeEvent event)
            final TableColumnModel eventModel = table1.getColumnModel();
            final TableColumnModel thisModel = getColumnModel();
            final int columnCount = eventModel.getColumnCount();
            for (int i = 0; i < columnCount; i++)
                thisModel.getColumn(i).setWidth(eventModel.getColumn(i).getWidth());
            repaint();
}thanks
daya

Contacts and Calendar not synching. (Centro, Windows XP, Palm Desktop 6.2.2) Please help!

I originally posted on the Hotsync forum, and it was suggested that I post my question here. Important information: My office uses Microsoft Outlook Exchange, and I have my Centro set up to get my emails. It also wants to sync my contacts and calendar; however, that is completely unneeded for my purposes. I need to synch my Contacts and Calendar with my Palm Desktop. If there is something I have to check or uncheck to do so, please tell me how.
This is my original post:
"When I hotsynch, my memopad, my documents to go, everything seems to synch except my contacts and calendar.
After a few hours on the phone with tech support at sprint, we went for the nuclear option, hard reset, and the temporarily solved the problem, but now it has returned.
Information that might be important:
I'm getting a failed to backup 1 file error>PmTraceDatabase>Protocol Error: Handheld file could not be opened (4004)>SYNCERR_FILE_NOT_OPEN. This may or may not be relevent.
Anyway, I appreciate any help with this. I depend on this PDA phone to keep me organized and there's a slight and embarrasing touch of panic to how I feel now that it is not working correctly."
Post relates to: VisorPhone

Okay, I'm continuing to do research on this, and here's my suspicion, maybe true or maybe false. When I set up versamail to get mail from my office's exchange server, it also configured my contact list and calendar to sync as well, and synching with the the exchange server and synching with my desktop software are mutually exclusive.
If this IS true, then hopefully there is a way to set it up so I synch my email only with the exchange server, and leave my contact list and calendar configured to synch with my desktop software.
Any feedback or assistance would be greatly appreciated.
Post relates to: VisorPhone

I tried synching my 2nd generation ipod touch and it told me to update the software. Then it said "error 37" and could not complete updating but it has left me with an ipod that is not recognised by my pc and wont turn on or anything- just black

I tried synching my 2nd generation ipod touch and it told me to update the software. Then it said "error 37" and could not complete updating but it has left me with an ipod that is not recognised by my pc and wont turn on or anything- just black

Error 20, 21, 34, 37: These errors typically occur when security software interferes with the restore and update process. If you are using a PC, follow this article to resolve this issue.
Above from:
http://support.apple.com/kb/TS3694
You also may have to place the iPod in recovery mode. For how see:
iPhone and iPod touch: Unable to update or restore

TS1424 I purchased and downloaded a book in iBooks. I read about 16 chapters. The next time I opened the app to read the book, no words loaded on the pages. It would go to the table of contents, but not to pages in chapters. Any ideas?

I purchased and downloaded a book in iBooks. I read about 16 chapters. The next time I opened the app to read the book, no words loaded on the pages. It would go to the table of contents, but not to pages in chapters. Any ideas?

Try to reset your phone, hold the home/sleep buttons until it reboots and the apple logo appears, don't release the buttons till apple logo appears. If no luck there, Resync the book. Or delete it and redownload it. Downloading past purchases from the App Store, iBookstore, and iTunes Store

Tables BUT000 and SMOKNA1 not in synch

Similar Messages

Maybe you are looking for