Tables for Contract data

Hi all,
if you know any tables for contract data(For Contract report),
please tell me.....
Thanks,
kishore.

VBAK-contract header
VBAP-contract item
VEDA-changed contracts
KONV-condition records
MARA-material related to contract

Similar Messages

  • Tables for contract account receivables & payables

    Dear Members
    I would like to know tables for contract account receivables & payables.
    1)header
    2) line items.
    when we run report by t-code FPL9 we get information line itemwise. this information coming from which table.?
    Kindly inform me tables & not strcutures.
    regards
    Satish

    Hi
    Please check table DFKKKO and DFKKOP
    Award points if found useful.
    Regards,
    K Lakshmanan

  • Tables for Credit data

    Hi all,
    please tell me the tables  for Credit data.
    Thanks,
    kishore.

    1) Check to see if there are any entries in table S066 and S067. These SIS tables hold the credit data for sales order value and delivery order value.
    hope it helps

  • Tables for Budget data

    Hi,
    Please provide the base tables for Budget data
    thanks

    hi Arun,
    check these
    BPGE (overall budgets),
    BPJA (annual budgets) and
    BPPE (period budgets).

  • The table for storing data for infocube and ODS

    Hi all:
        could you please tell me how to find the table for storing data for infocube and ODS?
    thank you very much!

    Hi Jingying Sony,
    To find tables for any infoprvider go to SE11.
    In database table field enter the following
    Cube -
    Has fact table and dimension table
    For customized cube - ie cube names not starting with ' 0 '
    Uncompressed Fact table - /BIC/F<infocubename>
    Compressed fact table - /BIC/E<infocubename>
    Dimension table - /BIC/D<infocubename>
    For standard cube - ie cube names  starting with ' 0 '
    Uncompressed Fact table - /BI0/F<infocubename>
    Compressed fact table - /BI0/E<infocubename>
    Dimension table - /BI0/D<infocubename>
    Click on display.
    For DSO,
    For standard DSO active table- /BI0/A<DSO name>00.
    You use 40 for new table.
    Click on display.
    For customized DSO use- /BIC/A<DSO name>00.
    An easier way is in the database table field, write the name of the cube/DSO preceeded and followed by ' * ' sign. Then press F4 . It shall give you the names of the available table for that info provider.
    Double click on the name and choose display.
    Hope this helps,
    Best regards,
    Sunmit.

  • Method :Want to Use Z-Table for Accessing Data

    Dear All,
      I am new to BADI. I have implented one HR-PAYROLL Badi.
      In this BADI I am having one method . I want to Use One Z-table for accessing data from
      that table . Not able define the table in method.
      Kindly tell me how to do it .
      Thanking you in Advance
      Siladitya

    Hello Siladitya
    I assume your problem is the definition of an itab for selecting data from your Z-table. In case of classes you have to use table types and workareas, e.g.:
    METHOD name_of_interface_method.
    DATA:
      lt_itab    TYPE TABLE OF <name of z-table>,
      ls_record  TYPE <name of z-table>.
      SELECT * FROM <name of z-table> INTO TABLE lt_itab.
      LOOP AT lt_itab INTO ls_record.
      ENDLOOP.
    ENDMETHOD.
    Regards
      Uwe

  • Dynamic Internal Table for reading data from external file

    Hello All,
    The task was to create a internal table with dynamic columns,
    Actually this is my first task in the WebAS 6.20, my program is based on input file provided by user with certain effort. this file can have different effort for a one yr to five year frame..
    I needed to read the raw data from file, based on months create a internal table to hold the data, after this i need to validate the data...
    I have browsed thru dynamic internal table topic, but couldn't find any dynamic appending structure, the dynamic structure would contains 12 month fileds.
    can any one help me in getting my task completed..
    Thanks
    Kumar

    Hi,
    I see that you posted the same question a couple of days ago at Dynamic Internal Table for reading data from external file Didn't Charles's response address your problem?
    Regards

  • System table for Additional Data - Basic data text (MM03)

    Hi
    How can I get the system table for stroring data in MM03 in "Additional Data" the "basic data text" ?
    Thanks in advance.

    Hi,
    CALL FUNCTION 'READ_TEXT'
             EXPORTING
                CLIENT                  = SY-MANDT
                ID                      = 'Z610'
                LANGUAGE                = SY-LANGU
                NAME                    = V_TDNAME
                OBJECT                  = 'VBBK'
                ARCHIVE_HANDLE          = 0
             IMPORTING
                HEADER                  = I_TEXT_HEAD
             TABLES
                LINES                   = I_TEXT_LINE
             EXCEPTIONS
                ID                      = 1
                LANGUAGE                = 2
                NAME                    = 3
                NOT_FOUND               = 4
                OBJECT                  = 5
                REFERENCE_CHECK         = 6
                WRONG_ACCESS_TO_ARCHIVE = 7
                OTHERS                  = 8.
    Regards,
    Bharani

  • Error while filling set up tables for 2LIS_11  data sources

    hello All ,
    I tried to fill setup tables for 2LIS_11 data sources in OLI7BW , but the job RMCVENUA is getting cancelled. below is the Job Log ,
    Job started
    Step 001 started (program RMCVNEUA, variant &0000000000005, )
    Start of order processing
    Error determining rate: foreign curr. local curr. INR date 10.09.2008 (doc. 1)
    Job cancelled
    Is there any setting required in R3 side before filling setup tables of SD ?
    I am able to fill the setup tables for 2LIS_05 ( Notifications) successfully.
    Regards ,
    Amol Kulkarni
    Edited by: Amol Kulkarni on Dec 4, 2008 3:59 AM
    Edited by: Amol Kulkarni on Dec 4, 2008 4:00 AM

    Hi,
    one of the sales document currencies is not maintained properly in the system and therefore its failing.
    you need to correct those documents before filling the set up tables.
    Either you can chose the option fault document toleration limit to 1000...so that 1000 records wrong records can be tolerated or you have to crrect it first before filling up the set up tables.
    This will generally happen in test systems.... but very rare in production...so try to maintain currrency again in the system.
    generally you will see the sales doc number in the error for which its failing.
    May be at the time of filling some óne was working on some sales document and tried it save it.
    correct that doc and fill the set up tables again.
    Thanks
    Ajeet

  • Table for material data tab

    HI,
    what is the table for material data tab in PO?
    Regards,

    Data at item level i.e. may be material data, invoice data is stored in EKPO.
    Regards,
    Sarang

  • Table for Sales datas assinged to Equip/Floc

    Hi
          I need a table for Sales datas like sales org,distribution channel,divition,sales office,sales group assigned to equipment master,
    Points assured
    Thanks
    Seenu

    hi seenu
    yes you are wright the sales organisation, DC,Divison is strored under the ILOA table only , since in equipment its being picked from the view table,you can interrelate with FL and equipment
    regards
    thyagarajan

  • TO FIND TABLES  FOR MASTER DATA TRANSACTIONS

    HI , When we create a customer, the information is updated in structure RF02D and some tables like KNA1 are updated ..
    How can we find the tables for master data transactions.?
    please reply...
    thanks.

    Hi,
    I entered into the TC : ST05, Activated the trace then I created a customer, then I came back and deactivated trace, then I clicked on display it gave me a list ( yellow color list ) ... Wat do u mean by update methods here ...
    Thanks
    SK SIDDIQUI

  • Table for Contract

    Hi Gurus
    would you pl tell me which table we need to look in to see contract and contract type field?

    Hi,
    Please check these tables for contract related fields.
    VEDA
    VEDAPO
    VLAUFK
    Thanks & Regards
    Sadhu Kishore

  • Asset Tables for legacy data takeover

    Dear Friends
    We've to take assets data from one client to another and hence would be using Legacy assets.
    Could you please let me know from which tables / reports i should extract the data related to master & transaction data from the legacy system which is also on SAP.
    ANLA - master data and to take those assets which are not deactivated
    ANLB
    ANLC - asset accumulated APC & dep. And current yr dep
    ANLZ - dep terms data
    ANEP - asset transaction data for current year acquisitions
    I dont have the system in from of me and i hope the above tables are correct.
    1. Please let me know if other tables are required?
    2. Should the dep area data be posted with remaining useful life & expired life in legacy asset?
    Regards
    Kapil

    Hello Kapil,
    I invite you to carefully review the attached SAP notes which should
    provide you with the necessart answer:
    68802   Legacy data trnsfr: diff.fields n.ready f.input
    550176  FAQ note legacy data transfer asset master records
    373894  Collective note: introdctn to prblm solutn in FI-AA
    Further I also attach the following 6 notes that provide further
    informative details regarding legacy transfer, and also some specific
    only for legacy transfer during the year:
    729164  AS91/AS92: Incorrect ready for input status for prop. values
    29706   AS91/92/94: Dep. area fields not ready for input
    4206    Net book value input at old data transfer
    50607   Depreciation during old assets data takeover
    26240   Reconciliation of posted depreciat. after takeover
    For further information, please review the information for asset data
    transfer in the R/3 Library:
    FI-AA - Assets -> Legacy Data Transfer -> Special Considerations for
    Asset Data Transfer -> Time of Transfer...
    thanks and regards
    Ray

  • Table for Plan Data

    Hi Experts
    Created Cost Element Groups and Cost Center Groups and have Uploaded Plan data in KP06.
    Kindly provide me the Table Names for Cost Element groups,Cost Center groups and Plan Fixed Costs.
    Thanks & Regards
    KumarRaja
    Edited by: Kumar Raja D on Oct 7, 2009 2:36 PM

    Hi,
    Tables for groups are SETNODE and SETLEAF. Select by object class the required group (cost centres, cost elements, etc.) The tables for planning are COKP (primary) and COKS (secondary).
    Regards,
    Eli

Maybe you are looking for

  • N76 SMS center configuration corruption/deadlock

    Recently got N76 for my girl friend, for some reason SMSC was not discovered by the phone, she did enter incorrect one. Later, I have created new (additional) SMS center via "Messaging > Options > Settings >Text message", everything was ok, I was abl

  • Hp pavilion elite m9340 will not boot from hd or cd. i get error code biohd-3.

    Like title says, box won't boot from HD nor from recovery disk, OS- Windows7. BIOS and system diagnostics recognize both drives. I opened the box and unplugged HD SATA cable and was able to boot it from recovery disk. It seems as though something is

  • Opening Balnce is not showing correctly in RG23A PART II register print

    Dear All, I am using J2I6 transaction for printing RG23A PART II register. I had maintained initially the correct Opening balances two year back in table J_2IACCBAL . But currently in register print out,, the figures coming is not matching with GL Ba

  • How to remove only the first .Period in a file name using CL.

    Hello! So, I've used code similar to this before to remove special characters.  It works for a period . as well, but, of course removes ALL periods. file=/Users/niles/Desktop/.test.txt; echo $file"${file//[\\.]/}" How do get a reult that only remove

  • Double Click on ALV Tree

    Hi All, I am displaying the output of my report in ALV Tree form displaying Plant, Functional Location, Equipment, Order as Levels. The Requirement is when i double click on the order number, it should navigate to the Details of the Order i.e. naviga