Tables for Damage Codes, Cause Code & Defects

Dear Masters,
I require the tables that store the damage codes, cause codes and defects assigned to a particular maintenance notification.
I require this in the form of printing a Maintenance order.
This is a kind of urgent. Please do help. Thanks in advance.
Chin2.

Dear Friends,
Thanks for your quick reply, I had my problem solved with your replies
Thanks once again
Chin2

Similar Messages

Work Order list report that will includes Damage and Cause codes

Is there a WO list report that includes fields of the Damage and Cause Codes?
Thanks.

Hi,
Generally damages and causes we update in notifications then i think there wont be a list which u r asking
For notification the t-code is iw69

Where do I find the long text for Damage and Cause in Notifications (IW21)

Hi ppl,
Can anyone let me know where the long text for Damage and Cause is stored (can be seen in IW21)?
Can I retrieve it through FM READ_TEXT? If yes, what are the values of the parameters to be passed?
Thanks,
David.

Hi!
It is easy to check whether some text is read by "READ_TEXT" or not.
1) Create text in dialogue mode and save it.
2) Place brake-point in READ_TEXT FM
3) go to view this text in transaction again
If the program is switched to debug mode, it means u can use this FM. Have u tried do this stuff?

How to update LTDX table for ZReport of T-Code FBL5N

Hi,
We have copied report RFITEMAR(T-code FBL5N) to ZRFITEMAR(T-Code ZFBL5N), to meet some of our requirement.
Now, It is not showing Layouts in F4 help of screen field "Layout" in ZFBL5N and also we are not able to set default variant for the same.
I found the issue is, First it goes to table LTDX to search for any default/1SAP variant but it didn't find any entries in the table.
If we can make this entry(Report: ZFITEMRA, Variant: 1SAP) in table LTDX, then issue can be solved. Please let me know if any other way is available for this type of issue.
Thank you.

Hi
FI_ITEMS_DISPALY is used by FBL1N, FBL3N and FBL5N and now (in your system) ZFBL5N, but the problem is FI_ITEMS_DISPLAY expects to be called only by standard transaction so:
if not is_u_variant-variant is initial.
*   check existence of named variant:
    perform alv_variant_check changing x_varexist.
    if x_varexist is initial.
      message i000(msitem) with is_u_variant-variant.
    endif.
else.
*   check existence of default variant:
    perform alv_default_check changing x_varexist.
endif.
if x_varexist is initial.
*   take 1SAP, if it exists:
    clear is_u_variant.
    case acctype.
      when 'D'.
        is_u_variant-report = c_program_ar.
      when 'K'.
        is_u_variant-report = c_program_ap.
      when 'S'.
        is_u_variant-report = c_program_gl.
    endcase.
    is_u_variant-variant = '1SAP'.
    is_u_variant-username = sy-uname.
    perform alv_variant_check changing x_varexist.
    if x_varexist is initial.
      clear is_u_variant.
    endif.
endif.
As you can see, the fm check if the variant exists and if you don't move any variant the fm check if a default variant exists, if both controls fail then fm overwrites the report name.
So I believe you should create a default variant in order to avoid the fm overwrites the report name
Max

How to find data base tables for a particular trancation code

Dear All,
Is there any T.code for finding data base tables used in a particular transaction code(Eg.: MM01).
Regards,
Satyapalli

Hello Satya
There is a very useful function module available for your requirement:
<b>RS_PROGRAM_TABLES</b>
Call this function module using:
OBJECT_TYPE = 'TRAN' " transaction
OBJECT_NAME = 'VA01'
" PROGRAM -> not required
MONITOR_ACTIVATE = 'X'
The function module will list you all DB tables touched by the transaction and shows whether they are read or updated (unfortunately, on ECC 5.0 this seems to be no longer the case. All tables are displayed as READ).
Regards
Uwe

Indentifying the R/3-tables for a corresponding T-Code(like me23n, xk03...)

Hai
Im a BW consultant. My client enters the vendor details data in XK03.
How can i know that in which R/3-tables vendor details are stored. I knew that LFAI.
But if i dont know the R/3-tables. And if i know only the Transaction Code in R/3. Then how can i know the corresponding R/3-table.
can anyone please tell me
i ll assing the points
kumar

Use transaction <b>ST05</b> sql trace.
Jus swich on the trace for the transaction XK03 and run the transaction XK03.
After finishing the trasnaction.. go to st05 and click on deactivate..
then check the list..u will get the list of all R/3 tables used.
OR
run transaction XK03.. click on system>status->program
double click on the program.. then clcik find and write SELECT...

Table for Profit center company code assignment

Dear all,
What is the table where we can see all company codes which are assigned to the concerned profit center?
Can any of you help me on this?
Thanks,
Kumar

Kumar,
After you make company code assignment changes to a PC, but BEFORE you activate the PC, the data appears in table CMDT_PC_BUKRS .
Once you activate the PC after making your changes, the data resides in table CEPC_BUKRS .
Trust this helps.
Regards
Gulshan

Catalog -code group & codes (object part,causes,damage,etc)

Dear PM gurus,
request kindly help to activate and flow the catalog - code groups & codes in standard report of iw29 or iw59 for the following code group & code
Notification Header level of Items :
1. Code group - Object part & code
2. code group - Damage & code
Sub header level of Items -- CAUSES
1. Code group & Code
Cause code text & cause text
in pm & service notification we are using the above code groups & codes, but the contents are not flowing in IW29 & IW59, pl help
thanx in advance
regards
Srihari

hi arun,
can u pl tell me whether i get
code group text & code text of the following in iw29 report thru filter?
causes
damage
activities
the above codes are given in pm notification, expecting the same info in iw29, pl do check thru set filter and let me know whether we get these along with (code group, coding code )
pl help if u know which report the above are coming
thanx in advance
regards
srihari

Tables related to a t-code

hi all,
Is there any way to find the database tables for a specific t-code.
Whenever i use F1 -> technical settings..i always end up in some structure...but hw do i knw the database table used to store the data for it.
regards,
johnson

Hi,
use SQL Tracer with which you can find out the Database tables used in a Transaction.
Just follow the steps to achieve your Requirement.
Go ST05 and
-click the activate trace button,then leave the transaction.
-Run your program either via tcode or directly from SE38,
-after completion of the program,
-go back to ST05 and click the Deacivate Trace button. Now click the Display Trace button,
-in the dialog, just click the green check.
-The next screen is the trace, where it lists all of the database tables that were accessed during the time of the trace, including system tables.
-The duration column will be important when looking for low performing SELECTs, the higher the number, the lower the performance,
-Put your cursor on a line where the OP is "OPEN" and click Explain, here is some good information about the select statement, how the data was accessed, and with which index.
Regards,
Raj.

Notification: cause code text/ effect code text

Hi Experts,
can any one help me in finding tables/ logic to get Cause code short text and problem code text of a notification .
Notification has these texts in it's item section.
Many Thanks,
Rohit

Rohit,
Have a look in QPGR (Inspection catalog code groups) and QPCD (Inspection catalog codes)
PeteA

HTC incredible 2 Cause Code: 97 Error Class: 3

I am getting a SMS error code - Cause Code: 97 Error Class 3.....anyone had this problem. I can get texts, but cannot send them..and also cannot make phone calls???????? Please help

Lets ensure your text messages are up and running, JulieDuffek. Have you cleared out your text messages threads? I would also suggest heading into Settings > Apps > Manage Apps > ALL > Messages > Clear Data.
YosefT_VZW
Follow us on Twitter @VZWSupport

Table for defect or damage code deletion field.

Dear All,
We have developed Z-Report in quality for recording defect.
I used viqmfe table for defect recording and field is fecod-damage code.
But my problem is after deleting defect in qa32,in z-report the defect is remain as it is.
I have already search defect deletion field, still ihave not got this field.
Pls suggest.
Thanks
Shabbir

Hi ,
Please checQMFE, QMSM,QMAA, QMIH & for all deletion indication entries
you need to get the corresponding flag for fiedl like KZLOESCH .
Ramesh

Cause Code - Structure for Plant Maintenance Notification

Dear firends,
I am trying to create cause code group structure for a notification as follows,
--> Superior Level Cause Code Group ( XXXX)
                    - -> Cause Code Group (XXXX-SUB)
                                   - -> Cause Code ... (1010)
In standard SAP we can create a Cause code group for a catalog then assign the Cause codes to the Cause code groups then assign to the Catalog profile ...and the structure looks like as follows (AS IS)
        - -> Cause Code Group(XXXX-SUB)
                                   - -> Cause Code ...(1010)
But in my case i need to add one more level above the "Cause Code Group" as shown below ( TO BE)
--> Superior Level Cause Code Group ( XXXX)
                    - -> Cause Code Group (XXXX-SUB)
                                   - -> Cause Code ... (1010)
Please assist me is there any way to accomplish this requirement through user exit or something else.Thanks.
Regards,
MJ.
Edited by: MJ Masi on Sep 23, 2009 10:43 PM

Babu,
Do the Divisions have its own Equipment base?          - Ans : NO
Do they create Notification for the same Equipment?   - ANS : YES
So, lets take the case 2 you mentioned ...
Case2:
If they are creating notification for a same equipment (EQ01 is common for all Divisions), you can create Defect code group with Division Name CHEMDEF1, CHEMDEF2,... BIODEF1, BIODEF2... etc ...
User has to select appropriate Defect code group and defect code.... If he enters Def code as Cause code group system will populate caused relevant for particular Def Code ...
Problem here is lets say the Defect Code Group CHEMDEF1 has two defect code A010 & A020 ,
                                                                              CHEMDEF2 has three defect code B010, B020 & B030.
I would like to bring this Defect Code Group CHEMDEF1 & CHEMDEF2 under DIV1 and Defect Code Group BIODEF1 & BIODEF2 under DIV2.
Example : The structure should look like this ..
                - DIV1 ( Superior level needs to be added on the Structure) - Will it be possible ?
                        - CHEMDEF1 ( Defect Code Group)
                                       - A010 ( Defect Code)
                                       - A020( Defect Code)
                        - CHEMDEF2( Defect Code Group)
                                       - B010( Defect Code)
                                       - B020( Defect Code)
                                       - B030( Defect Code)
                - DIV2 ( Superior level needs to be added on the Structure) - Will it be possible ?
                        - BIODEF1
                                       - C010
                                       - C020
                        - BIODEF2
                                       - D010
                                       - D020
                                       - D030
Please let me know.Thanks.
Regards,
MJ Masi

Cause Code/ Damage Code

Hello People,
I am a novice in SAP-PM.
I would like to know about the best practices document related to " Cause Code/Damage Code" used in Transaction IW21.
IW21 is transaction for entering data of a Malfunction Report.
" cause code or damage code signifies the cause because of which the equipment failed"
Does anybody have free download link to Implementation Guide to SAP-PM.
Helping persons would be suitably rewarded. of course with points.
regards
Vinay Maithani

Hi
You can use the following links:
http://help.sap.com/saphelp_46c/helpdata/en/c2/5e353fc925d3119b440060b0671acc/frameset.htm
http://www.sap-topjobs.com/SpecialPP/PM%20overviewdoc-config.pdf
Hope it helps
Best regards

Table for transaction code for creation of process order

Hi Gurus,
Please tell me, in which table i can see the transaction code used to create process order.
regards
Kaisar

Hi,
Table for transactions is TSTC.
If your looking for t-code for process order - COR1.
Regards,
Vivek

Tables for Damage Codes, Cause Code & Defects

Similar Messages

Maybe you are looking for